In jsf how to request the id: a href="1.jsf?id=1" SEGA /a

in jsf how to request the id: SEGA
in struts we can create a fromClass but in jsf i do't know howto
sorry ,i'am beginner

You can get PortletRequest from (PortletRequest)FacesContext.getCurrentInstance().getExternalContext().getRequest(). It has all the helper methods of HttpServletRequest. I am not sure about HttpServletRequest...since it is being protected in PortletRequestImpl.

Similar Messages

How to request the web desktop version?

I think in previous Firefox versions (or maybe in the Tablet version) it have an option to request the Desktop version of the website, instead of the .mobile. Is it possible with the 14 beta version?
I know there is the Phony extension, I'm asking to an integrated feature.
Thx

Hi Dimass,
We don't have an integrated feature for this, but I do keep asking about it and I'm hopeful that we will get it for tabletUI when it lands (currently planned for FF15, I believe). We pulled out the feature because it didn't work reliably enough, so I think they will rework it or integrate phony in the future version.
Thanks,
Michelle

How to request the Customers from SP1 to CP1

Hello Guru's
Can u please help me in getting the customer's from SP1 to CP1, who should do and what are all the steps to be followed, to get the customers from R/3.........
Waiting for ur reply
Regards/ Sreeram

select IDENTIFICATIONKEY, TASKID, TASKGROUPID, TASKNUMBER, OUTCOME, STATE, ASSIGNEDDATE, Assignees, APPROVERS, TASKDEFINITIONNAME, CREATOR, ORIGINALASSIGNEEUSER, SUBSTATE from WFTASK where identificationkey = <request key>

How to set the link to the result which are executed my query from database

Hi,
i have successfully displayed the results which are available in the database by jdbc, query.
Then, How to give the link like href to each & every result...
note: The number of records may be change. depending upon the records availablity in the database. but every result have the link.
Thanks in advance.
Regards
Kumar

hai kumar..
i post an example code ..
<%
ResultSet rs1=stmt.executeQuery("select fromu,subject,message,mdate,status,mesid from message where to='" + lname +"'" );
while(rs1.next())
l=rs1.getLong(6);
out.println("<tr align='center'> <td> <a href='deletemessage.jsp?mesid="+ l + "'>Delete </a></td><td>" + rs1.getString(1) +"</td><td> <a href='viewmessage.jsp?mesid="+ l +"'>"+ rs1.getString(2) +"</a></td><td>"+ rs1.getString(4) +"</td><td>"+ rs1.getString(5) +"</td></tr>");
%>

How to log the user activity in JSF?

How to log the user activity in JSF?
e.g. the pages the user accessed
searching criteria the user inputted...

user080701 wrote:
I need to write the info to database so that we can analyse which product most people seach for , etc.
Can I write a filter to capture the request info and write the info to database?Of course. Although I would still advocate using logs. You can always parse them and put the data in a database after the fact.

How to get the page request parameters in Command Button code

Hi everyone,
I am new to JSF and working on some Command Buttons. I put my java code via Edit Event, it works fine. But I don't know how to get some parameters from HttpServletRequest.
Can anyone give some guidance? It would be much appreciated.
Mike

Thanks a lot for your tip. Unfortunately I could not open the link you provided due to some network issue.
Yes, I intend to get some parameters from URL. I did try to put your code and get the parameters predefined in the URL, however I got the null returned. By the way, I put the following code in the page source part and it works. Just don't know how to get the value being passed to the command button event code.
<%
String userID = request.getParameter("u");
System.out.println("this is from head - the userID is :: " + userID);
%>
Thanks again and hope you could give me further advice.

How to track the flow of Sharepoint SSRS report requests to troubleshoot slowness

How to track the flow of requests of Integrated SSRS report links in Sharepoint.
We are using SSRS with Sharepoint for reporting purpose. The issue is some of the reports get generated fast and some other reports generation is very slow. When the sql query of these reports RDL file is executed, the records are shown fast.
Also even on clicking the "Add Subscription" link of "Manage Subscriptions" of a report is very slow for some reports, while it is fast for other reports.
I tried enabling SQL profiler to track the requests. I have checked profiler log for the SQL statements with exec sp_executesql. But they are not helpful.
Pls advice on how to track the request of flow of SSRS report request in sharepoint and how to troubleshoot the slowness in "Add Subscription" link, response of some reports.

Hi Pradeesh,
According to your description, my understanding is that you want to track SharePoint SSRS report requests to troubleshoot the performance.
Developer dashboard is very help full while troubleshooting the issues related to performance in SharePoint 2013. You can have a try.
About Developer dashboard, you can refer to the links:
http://www.sharepoint-journey.com/developer-dashboard-in-sharepoint-2013.html
http://msdn.microsoft.com/en-us/library/office/ff512745(v=office.14).aspx
Best Regards,
Wendy
Wendy Li
TechNet Community Support

My old Apple ID is on my iPhone, but this has been transferred to a new Apple ID. The iCloud on my phone is requesting the password for the old Apple ID, but this no longer exists. How do I update the iCloud Apple ID on my iPhone?

My old Apple ID is on my iPhone, but this has been transferred to a new Apple ID. The iCloud on my phone is requesting the password for the old Apple ID, but this no longer exists. How do I update the iCloud Apple ID on my iPhone? When I try to get the old passwork through forgot my password, the reply is that there is no account that exists.

Try the following....
Go to Settings>icloud, scroll to bottom of screen and tap Delete Account. Then log in using a different ID.

I have an iMac, and have a Verizon DSL account. Recently, my Mac Mail keeps requesting the passwords on my account every few minutes, and will not allow me to send messages using Mac Mail. I cannot edit the outgoing server; how can I send emails?

I have an iMac, and have a Verizon DSL account (3 email addresses). Recently, my Mac Mail keeps requesting the passwords on my accounts every few minutes, and will not allow me to send messages using Mac Mail (the message says that the outgoing server was rejected. I cannot edit the outgoing server, and the keychain will not save my passwords (the ports are valid). How can I change the outgoing server to send emails, and how can I avoid having Mail request my passwords every 2 minutes? Verizon, as usual, will not provide support to iMacs.

Is there an email saved in your drafts or outbox folder? I suspect that Mail is continually trying to send it, and each time Google is rejecting the email message.
You can open the message and then delete it from your Outbox folder. Then try removing all @gmail email addresses from it and seeing whether you can send to the other folks. I suspect that will work.
With email, if an SMTP server *can* verify email addresses, sometimes it will and it will refuse to send messages. If a message has to be relayed across servers, no verification is done, and you'll get a bounce if an email address is bad.

How to delete the request in se10

Hi Experts,
How to delete the request in se10 ....plz explain
Regards
Venkat

Hi,
Go to SE10,select the request which you wnat to delete.You will find a delete icon on the top.Select it.
This will delete the request.
Make sure that this request is the one which is under ur ID.If you want to delete the request which is under other ID,it wont allow to delete.
Thanks & Regards,
Suchitra.V

How to delete the Request Number

Hi all,
How to delete the Requset Number in Development Client.Already i transported this Req. Number to Tesing Client.

For what purpose, deleting the request number won't restore your dev system. You can remove the request from the import queues via transaction STMS to insure it will not be accidentally imported.
You can usually only destroy a request in source system if it has not been released and all objects are unlocked, but this is risky in some cases and may cause a loss of information or coherence.
Regards

How to delete the duplicate requests in a cube after compression.

Hi experts,
1. How to delete the duplicate requests in a cube after compression.?
2. How to show a charaterstics and a keyfigure side by side in a bex query output?
Regards,
Nishuv.

Hi,
You cannot delete the request as its compressed as all the data would have been moved to E table ..
If you have the double records you may use the selective deletion .
Check this thread ..
How to delete duplicate data from compressed requests?
Regards,
shikha

How to delete the compressed request in bi 7.0?

how to delete the compressed request in bi 7.0?
Reverse Posting option available in BI 7.0?
Thanks,
Pramod

Hi Pramod,
Check this Thread,
Re: Selective deletion after compression
before posting a thread pls check in the forum.Lots of threads are already been posted related to your Query.
Hope this helps..........

My Icloud is tuck on my old email adress. i can not retreive the password becaue when i request the email it doent get sent to thi adress. how can i change it sothat my icloud is on my new email. i cant login or out of icloud now.

My Icloud is tuck on my old email adress. i can not retreive the password becaue when i request the email it doent get sent to thi adress. how can i change it sothat my icloud is on my new email. i cant login or out of icloud now.

To change the iCloud ID on your phone you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

How to get the concurrent request id while running a concurrent program

Hi All,
I am working with oracle apps r12.
I have created a custom report with some parameter. And i have created a parameter P_CONC_REQUEST_ID.
And in the report i have used SRW.USER_EXIT('FND SRWEXIT'); in after report and SRW.USER_EXIT ('FND SRWINIT'); in before report trigger.
when i ran the report from the application, I didnt get the conc request id in the parameter. It not passing the concurrent request id.
Can any one tell me how to bring the concurrent request id.
Thanks & regards
Srikkanth
Edited by: Srikkanth.M on Mar 14, 2012 1:56 PM

Hi;
FND_CONCURRENT_REQUESTS
This table contains a complete history of all concurrent requests.
FND_RUN_REQUESTS
When a user submits a report set, this table stores information about
the reports in the report set and the parameter values for each report.
FND_CONC_REQUEST_ARGUMENTS
This table records arguments passed by the concurrent manager to each program it starts running.
FND_DUAL
This table records when requests do not update database tables.
FND_CONCURRENT_PROCESSES
This table records information about Oracle Applications and operating system processes.
FND_CONC_STAT_LIST
This table collects runtime performance statistics for concurrent requests.
FND_CONC_STAT_SUMMARY
This table contains the concurrent program performance statistics generated by the Purge Concurrent Request and/or Manager Data program. The Purge concurrent Request and/or Manager Data program uses the data in FND_CONC_STAT_LIST to compute these
Also see:
concurrent request details
Find history of concurrent request details
How to determine the user who placed a certain concurrent request?
Regard
Helios

In jsf how to request the id: a href="1.jsf?id=1" SEGA /a

Similar Messages

Maybe you are looking for