In Production system Infocube mange screen selection changed

Dear Experts,
I have problem with my production system.
Problem:In Prod system for all the Infocube settings has changed may yesterday because of that we are not able to see in the manage screen Tranferred and Added records colums.
Could you please suggest how to overcome this situation in production system and also why it was happend suddenly?
Regards,
Kiran.

Hi,
Thanks for your prompt responce, but nowthing was happend like system refresh or package upgarede.
Could you please suggest me any other ways to resolve this issue.
Regards,
Kiran.

Similar Messages

  • How do I lock GRC Production system to prevent any configuration changes.

    1. For GRC AC SPM: Does SCC4 client lock setting prevent FireFighter configuration lock too ?
    2. Is there a role or list of actions which would allow someone to make configuration changes in the Java modules (CUP, ERM & RAR)

    You can make your life easy with a test system and try it.
    Designing controls for something which has not been tested by you, yet someone called Julius made claims about it the internet, is not a correct approach. Sorry, just being honest.
    But if you do want to go about it the hard way, then use SE11 to display the delivery classes of the tables and SOBJ to check the views for permitted "current settings" flags. If views have not been used, then you need to check the code which updates the tables directly, but if I remember correctly these are maintenance views.
    Cheers,
    Julius

  • Role not displayed in Production system

    Dear all,
    I have CUA set up (CUA is configured in solution manager), and I assigned 10 roles to a user in solution manager using SU01 and selected  Production system while assigning roles and the roles were already existing in production system.but after role assignment to the user, I verified in Production system and I found that they are not reflecting in PROD. Infact, I have done user comparision but still no change.
    Please let me know do I need execute SCUL by selecting the User ID.
    If yes please let me know the steps to execute SCUL.
    Your help is much appreciated!
    Many thanks
    Anil.

    Hi,
    Please go to the Transaction SCUL, and give the user id and the system as the prodution system ID (eg. PRD100). By default the Error, Warnings and Unconfirmed Distribution will be already checked. Do not change them and then click on Execute.
    If you receive the message saying No Data, then it means that the IDOCs for that user were successfully pushed from CUA to the production system.
    But, since the change was not reflected, when you execute, you will be able to see the status where the IDOC is struck. Expand the tree and see the nature of the error, and try to resolve that error. And then select the entire tree and click on the Distribute button.
    It will give you a pop up, let all the checkboxes as it is, and continue. After the distribution is triggered, you will get a message in SCUL.
    Refresh the SCUL data, and you should be able to see the current status of the distribution.
    If all the data is cleared in SCUL, you can log into your produciton system adn check the users roles. New role should be visible there.
    I hope this will clear your doubt. Let me know if you have any questions on this.
    Regards,
    Sneha Vyas.

  • Maintain overhead rates in production system

    Hi experts,
    i want to maintain percentage overhead rates in production system, but system has status not modifiable. I found t-code S_ALR_87008275, choose Status, double click on transaction, i found IMG activity SIMG_ORKK_WERK_KZZ2 and area menu KKSM, than i triggered SE16 table CUSAMEN and create new class and object, all i transport to product system. But i can change or create overhead in production system only, but not in details concrete Percentage.
    What shall i do to change in details percentage?
    Thanks for advice.
    Gustavo

    Hi,
    check SAPNET note 301665 maybe 310768.
    best regards, Christian

  • Data cleanup for customtables in production system.

    Hai,
    My requirement is  a list of custom tables data should be deleted in production system based on some selection-criteria.
    Any one can suggest how we can achive this.
    Shall I write any Zprogram or any other way.
    I have written code for one table .
    Reprot ZTesdel.
    Tables :  YDCS_COMP_CR.
    DATA itab1 type STANDARD TABLE OF YDCS_COMP_CR.
    SELECT * FROM YDCS_COMP_CR INTO TABLE ITAB1.
    DELETE YDCS_COMP_CR from table ITAB1.
    Please any one can tell the same code will work for deleting records from YDCS_COMP_CR or any other piece of needs to added?
    Regards,
    Krishna

    Depending on the nature of the data, there might be a legal retention period to be observed.
    Also check for dependencies to other tables, foreign keys, so you don't end up with a corrupt database.
    If it is data in the GB range, don't delete in one chunk, or the redo buffers might overflow. Instead fetch packages of x records, delete them and do a commit work before reading the next package. Use OPEN CURSOR WITH HOLD and function DB_COMMIT for this purpose.
    Thomas
    Edit: just saw this is a continuation of
    custom tables data deletion (data cleanup)
    zprogram to custom table data deletion
    Please now work with the information provided so far before coming back with more questions.

  • Steps to move workflow to production system

    Hi,
    We have a workflow in our production system.Now we have totally changed the workflow in dev system like total logic and new tasks have been created for the same.Now we are ready to move to production system after testing.So what all things are to be done/checked in production system.One thing we faced while moving to quality was that agent assingment was missing in quality.and we made it 'general' in quality system.will that happen in production also.if yes,what we need to do.
    do we need to close our previous workflows before sending new definiton.I really dont know if we change the workflow,will the running workflows run on old version or new version.
    Please help me on the steps or checklist that I should follow.

    I think you should use  this link to transport task attribute
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d00a1cb4-913c-2c10-d991-caf663ab9b16?quicklink=index&overridelayout=true
    Thanks
    Arghadip

  • Generate Export DataSource from InfoCube In Production System

    Software component : BI release 7.0 SP 18
    Dear Gurus,
    we have a strange situation in our production system from a month till now.
    We want to generate an export data source from an infocube to load data into another one but now when we try to generate in prod ( right click on infocube and select "Generate Export DataSource" ) we can't create anymore.
    Following message appears :
    no changes to repository and cross client customizing object allowed
    and the generation is stopped.
    We always did it in production system in the same way as in the other system and then transported the update rule or transformation, but now it seems that is no more possible.
    No setting has been changhed in SCC4 and in object changeability. Maybe is an authorization problem or is due to any other setting?
    Does anybody has a way to solve this problem?
    <removed by moderator>!
    Kind Regards
    Stefano
    Edited by: Siegfried Szameitat on Nov 24, 2008 4:18 PM

    Hi Stefano,
    If you want to generate an export datasource you ask your basis team to open the system so that you can do.
    As per the Sap Best Practise you can do  the export datasoorce in your development system and move it to the quality and after testing you transport to Production.
    Generallly if you can look in to production authorizations you may have only some operation like to display only.SOme times basis may give authorizations like creation of DTP and Infopacks like that.
    Regards

  • Aggregates in Production System and Change Run Hierarchy

    Hi All,
    Can anybody tell me, Why should we create Aggregates in Production System nd How?
    What is Change Run Hierarchy nd How to perform this?
    Reply back me to [email protected]
    Regards,
    Kiran

    Hi Kiran,
    Aggregates are nothing but a subset of your Infocube... when a query is executed, it firstl looks for the presence of the data in your aggregates and if found then it fetches the reocrds from there itself.. Else not, it'll search teh entire infocube and then fetch the records which is at a high risk of time consumption and the performance of the Query execution slows down or becomes worse significantly.. for this purpose, you build aggregates.. how do you decide whether you should go for aggregates or not is based on the following criteria...
    if the %Data Base time is > 30% and if the KPI ratio (selected to transferred records) is > 10, then you go for the aggregates... you can get these details in the ST03N transaction by choosing Expert mode and selecting BI Workload... you can find all the statistics related to the Query execution starting from the front end time to db time/...
    thats all about your aggregates...
    Attribute or Hierarchy change run is done so that any changes to your Master data Attributes will have to get effected in terms of your reporting...
    say for eg.. ur name is XYZ and loc is in India.. this is how it'll be reflected in your reporting also.. but at a later point in time, if you have changed your location from India to Europe, then for that to be reflected in your reporting, you'll have to perform an Attribute change run for that Characteristic...
    Hope it solves your issue..
    Regards
    Manick

  • How can I control the Product Category in the Pre-select screen

    Dear ,my expert :
       I  work in ROS scenario . In my case ,the supplier can select Product Category A, Product Category B,and Product Category C when they  filled the data in the  registration scren . And the purchaser A just is responsibility for the Product Category A ,and the purchaser B ,C are the same situation .
      So ,my question is :
       1,How can I control the Product Category in the Pre-select screen? I mean that the Purchaser A can just select the   Product Category A in the Pre-select screen .
       2,You know the supplier select two category  is one BP in the system ,So if the purchaser A accepe the supplier ,the purchaser B will find the status is "accepted ",So the purchaser B will be confused about it .
       SO ,in my case ,any one has the suggestions ,any link welcome .
       Bestregards
      alex

    Hi Alex,
    As per standard SRM solution, this is not supported. Purchasers who accept new suppliers, accept them on the whole and not for any specific product category. There is no such thing as Purchaser being responsible for specific prod category in ROS.
    What you could do however is to build a custom workflow to achieve it. You could have category approvers after the purchaser has accepted the supplier. Based on the category provided by the supplier in the reg form, you could route these suppliers to appropriate category approvers.
    Regards,
    Nikhil

  • BCS - master data change in productive system?

    Hi group,
    We are about to go live with our BCS system, but of course someone got the great idea of changing the company code currency for one of the "non-SAP" companies in the group since the sytem was set up.
    When I enter the consolidatin workbench in our production system, everything is considered customizing, so no changes are allowed - even to master data. I''ve searched the "Object changeability" settings of the BW system but couldn't find any settings regarding BCS. I also checked settings in se06 and found a namespace "/FINB/" which I suspect has something to do with BCS (currently set to "Not modifiable")?
    What are the correct system settings for the BCS system to function correctly, and what is the normal procedure for maintaining master data in SEM-BCS? - by transport requests or by changing directly in the productive system?
    Best regards
    Thomas
    P.S.: Are there any usefull resources for BCS on the Internet? The help in the system is very limited and I can't find anything on the SAP marketplace.
    Message was edited by:
            Thomas Ringe Pontoppidan

    Hi Dan,
    Example: you have a single selection containing a set (not range) of separate values. Then you decided to change the set (adding one more value, for example). Are you saying that this single selection change in DEV will be reflected automatically in PROD? 
    From my experience I know that while using single selections, the system replaces it by the set/range/node. And when a single selection was changed, nothing yet happened with elimination settings using SS. You have to go into each part of the settings in the method and refresh the SS. You'll see that only after that the set of values was changed. It's obvious for me that if I don't do this refreshing in DEV and then import the request into PROD, I'll have the old, not modified, version of my settings.

  • Screen resolution changes when I reboot hptouchsma​rt 9300 elite all in one pc product #: LK282AV

    screen resolution changes when I reboot hptouchsmart 9300 elite all in one pc product #: LK282AV
    When I reboot computer the screen resolution changes automatically.

    Hello anitagold:
                Welcome to HP's forum. Thank you for visiting us how ever you are on the wrong forum. You own a business Touchsmart witch has a total different operating system then home user's does. This section is for home user Touchsmarts. This is where you need to post http://h30499.www3.hp.com/ You will receive a much accurate respounce I also think they have live chat assistance as well during business hours on line as well. Your software is also different then ours is so it would not do you any good for me to give you direction on how to adjust your screen resolution. Because your computer even though they look a like on the outside they are not alike inside. Thank you frrw.

  • Not able to change the data of test data containers in production system

    Dear All,
    We have created eCATT scripts in Development SolMan System and moved the transports to Production SolMan System.  Customer wants to change the data at Test data containers and run the scripts in production system but we are not able to edit the data. 
    May be the reason is SCC4 transaction code has set the below option.
    Changes and transports for client-specific Objects
    u2022 No changes allowed
    Customer doesnu2019t want to change the above option and wanted to change the test data containers to give different datau2019s and run the eCATT scripts.
    Could you please let me know the solution for this?
    Your help is really appreciated.
    Thanks,
    Mahendra

    eCatt has the feature where you don't need to transport the scripts or test configuration to our target system. We can keep all our scripts and test data in Solman and run this script any other system in your landscape using the System data container and target system.
    Maintain the production as one of the target system in System container in Solman and point that system while running the script. Change the test data in Solman to run this script.
    Let me know if you need more information
    thanks
    Venkat

  • Support message and change requests only for production system

    Hi guys,
    I would like to connect the solman helpesk with CHARM ( CHARM is still running ).
    In CHARM I have to create a CR only for production system. ( don't know why - but works as designed).
    In SAP helpdesk I can create support messages for every kind of system type but if I want to connect both (HD and CR) , the source system (ibase component) of the issue will copied to the CR and runs in error because of the rule (only p-system) of CHARM.
    Of course I can change the ibase to production system manually in SDCR but it seems a very error-prone method.
    Now my question: is it possible to change the ibase component due to the creation of CR by copy rule or something like this?
    Kind regards
    Rayko

    Hi Rayko,
    We do not have this option.
    Once in ChaRM, we assume that the changes will always correct an issue in the PROD system.
    I would recommend to open the tickets directly with the PROD system IBase, once the issue is also happening there.
    Best Regards,
    Fernando

  • Logical System Change for Production System

    Hi experts
    We have new CRM and BI project.  Logical System name of our ERP production system is not in naming standart. So we want to change logical system name and run BDLS in production system.
    Is there any risk about this prosedure?
    Best Regards...

    Hi,
    It is not advisable to change the logical system in production client once its assigned.
    Regards,
    Nisit

  • Transaction Launcher: Logical System in Production System does not change

    Hi,
    I created a transaction launcher in the CRM development system (CRD) to launch the transaction IL02 in the ECC 6.0 system (ECD). Then I transported the changes from CRD to the CRM production system CRP. I also transported the changes from ECD to ECC production system ECP.
    However, when I see the transaction launcher in CRP system, it is still configured for the URL of ECD. I want the transaction launcher to connect to ECP. One option I have is to change the class name in the CRP system. However, I am not allowed to create a new ABAP class in the production system. Is there any other way to change the target system automatically in production system?
    Thanks,
    Rohan.

    Thanks Piyush. Could you be a bit more specific? I followed these steps:
    1. In transaction CRMS_IC_CROSS_SYS, created a logical system URL for production system
    2. In customizing setting Copy/Delete Launch Transactions, deleted the transaction launcher id.
    3. In customizing setting Configure Transaction Launcher, created the same transaction launcher id newly.
    I still am not able to change the logical system. However, I can do it if I change the class name.
    While deleting the transaction launcher id, should I be deleting all dependencies?
    Regards,
    Rohan.

Maybe you are looking for