In PSE 11, is it possible to associate a KEYWORD PLACE Tag with a pin marker on the PLACES map?

I would like to be able to tag a photo (ie: many photos at one time) with a KEYWORD tag for a place and then be able to find those photos on the map under the PLACES tab.

It can be done but it’s not very intuitive.
1. Click Places and select an existing pin on the map, say with 20 photos which will get highlighted.
2. Switch to Media tab and keeping the original selection highlighted you then select the other photos, say five new images you wish to include (use ctl+click)
3. Click the add places button and when the Add Places dialog opens click the menu icon top right and choose deselect all.
4. Select the new photos using ctrl+click (the ones without the white icon top right of thumbnails) and drag to the pin. The number will increase to 25 in this example then click Done.

Similar Messages

  • I'm trying to associate my iphone serial num with my apple profile, but the system say that the number is not good !

    I'm trying to associate my iphone serial num with my apple profile, but the system say that the number is not good !

    it is correct in this link;
    but in the https://supportprofile.apple.com/PramAddRegisterProduct.do
    the message indicate the (same) number is not valide

  • Is it possible that Exchange UM could be configure with two call managers over the same sip?

    Hi,
    I have Cisco call manager 8.2 integrated with Microsoft Exchange Server 2010 Unified Messaging.
    Call manager has primary and secondary server. I created a sip trunk and linked primary CUCM with Exchange. Users can leave and get voice mails.
    Problem: In case that primary server is down (WAN is down) the users registered on secondary server but they cannot contact to Exchange Unified Messaging.
    I added  new UM Dial Plan with the same pilot and associated it to the secondary CUCM server. UM answered but do not recognize the extension number "is not a valid mailbox extension".
    Is it possible that Exchange UM could be configure with two call managers over the same sip, the same pilot number, different associated UM servers and get access to the same voice mail boxes?
    If not:
    Does exist a way to configure Exchange UM that will work if one CUCM server is down?
    Thank you,
    Peter

    Hi,
    I have Cisco call manager 8.2 integrated with Microsoft Exchange Server 2010 Unified Messaging.
    Call manager has primary and secondary server. I created a sip trunk and linked primary CUCM with Exchange. Users can leave and get voice mails.
    Problem: In case that primary server is down (WAN is down) the users registered on secondary server but they cannot contact to Exchange Unified Messaging.
    I added  new UM Dial Plan with the same pilot and associated it to the secondary CUCM server. UM answered but do not recognize the extension number "is not a valid mailbox extension".
    Is it possible that Exchange UM could be configure with two call managers over the same sip, the same pilot number, different associated UM servers and get access to the same voice mail boxes?
    If not:
    Does exist a way to configure Exchange UM that will work if one CUCM server is down?
    Thank you,
    Peter

  • HT2693 Is it possible to receive a refund if unsatified with an application purchased from the App Store?

    Hello,
    I recently purchased a game from the App Store in which I am unsatisfied with.
    I was wondering what is the refund procedures, if any?
    Thanks,
    Jason

    First... Contact the Developer of the App.
    If no joy...
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Is it possible to export a file from Organizer with the list of all the images in an album?

    Is it possible to export a file from Organizer with a list of all the images in a certain album? In filling one of my albums I did not save my edited images to the same file... they are spread out a bit.... Now I want them to make a book with them (outside of Elements).

    As far as I know, Elements does not have the ability to create lists.
    The solution to your problem of making a book outside of Elements is to place all the desired photos in an Album and then select File->Export->As New Files which gives you the ability to make a copy of every photo in the album in a new folder, from which you would create your photobook.

  • Associate old keyword tag (name) to a face in PSE 8.0?

    I have been using PSE 5 for a while, and am considering the upgrade to 8 .
    In the trial version, I saw a nice face recognition engine, with labeling capabilities.
    My question is, how to associate the names of people, that I have already labeled
    in the old version of PSE, with the new type of tag that is attached to automatically
    recognized faces.
    I have thousands of images in my catalog, most of them tagged with the names
    of the people in them. After importing to PSE 8, the names are considered as
    "keyword" tags, but I would like to turn them to face recognition features.
    By the way, is there a way to see the list of faces PSE recognizes, and Edit/Arrange them ?
    Thanks,
    Gideon.

       Thanks for your assistance.
       Since long time has passed from the time I asked the question, I discovered
    a few things.
    1) This observation is correct, but since I used to have PSE 5, which does not have face recognition, it does not matter much.
    2) This is what I would expect from the program. However, from my question one can understand that it does not actually happen. What I found out since, is that it sometimes happens. I think that generally, if I first tag the image with the names, and then apply the face recognition procedure, the program would identify the tag with the name I gave the face. This does not always happen though (I think). However, if I just apply the face recognition program, and give a face a name (that already exists as a tag), the program adds a new tag with the same name and the association is not made. I believe there are further complications which I have not investigated fully. After the program recognizes a face, by its pattern recognition, and this name already exists as an old name tag, does it actually use this tag, or does it add a new name (assuming the picture was not previously labeled).
    3) I would expect the program to perform face recognition on old pictures, which are already labeled with names, for which the program was already trained, by giving priority to these tags in the face recognition.
    Gideon

  • TRM: Is it possible to associate a profit center to a contract?

    Dear all,
    While inserting contracts representing bank loans using TRM we are dealing with a problem, since we have the document splitting functionality active we are obliged to associate a profit center to each movement. But we cannot find a way to fill the profit center information at the contract in TRM, so, there is no way to identify the profit center to use in accrual movements for example. It must be possible to associate a profit center to each loan created at TRM. How could we solve this error?
    Thanks in advance,
    Daniel

    Hi,
    In TRM deal you enter characteristic field profit center or cost center and in spro
    General Settings
    Accounting
    Link to Other Accounting Components
    Enhancements in the Posting Interface
    This is user exit and in this node you enter abap coding so deal wise profit center / cost center populate.
    Sound option you enter abap coding in FI user exit.
    Vishal

  • How to cause them to associate my Case Number 185689167 with the real phone number I need to be called at:

    I purchased a one year subscription to Acrobat Pro, and after installation on my MacBook, in the LaunchPad (aside from the normal Adobe Acrobat Pro, Acrobat Distiller, and Forms Central for Acrobat) a folder containing two icons.  The first was (I forgot the name) and the second entitled AAMLauncherUtil.  Shortly after installation I ran the AAMLauncher Util, and it downloaded and "updated" Acrobat Pro and installed Creative Cloud.  I was told by some person in Tech Support that I didn't need these two additional icons in LaunchPad, and I could just drag them to the trash.
    The folder would not go in the Trash, so I dragged them out of the folder and then the one whose name I don't remember was able to go to the Trash, but not the AAMLauncherUtil icon.
    I called Tech Support again, and got a technician whose name I will withhold, but although he tried to solve the problem, basically he was clueless and I could hear him asking other people in the background what to do and they were giving him suggestions, mucking around my library and deleting anything that sounded like it was associated with AAMLaucher, and in the end all he succeeded in doing was making my Creative Cloud not work anymore and produce messages that it was corrupted and had to be removed and reinstalled.  Finally he gave up and said that he was referring my Case 185689167 to the next level higher of tech support, who would call me within 24 hours.  Of course they never did that so I called Apple Support and a representative there went way beyond what he needed to do and we were able to uninstall and reinstall Creative Cloud and make it work again, although the AAMLaucherUtil icon remains there.  Currently, it doesn't update anything like it did the first time I ran it, or act like it is trying to update anything, but it does open Creative Cloud if you have closed it. 
    Several days later (not the promised 24 hours) I got an email from my Voicemail Service with a  transcribed message from Adobe Tech Support saying that they had tried to call me... at the number listed in my subscription payment details... NOT at the number I had told them to call me at, and since I am 7000 miles away from my billing number I didn't get the call.  The message requested me to call them back.  I did so, and the message on the VRU said I would have to wait approximately 30 minutes. Two and one half hours later (not 30 minutes) someone answered who was not Second Level Tech Support, and reiterated that it was not possible to transfer me to them, and he would note that I had called back and they would call me within 24 hours.... yeah right.  By then after waiting all that time to speak to someone I was so mad that I forgot to mention the correct number to call me at... although I had mentioned it previously.  Several days later (not 24 hours) they called the wrong number again, and when I didn't answer it then sent me an email that they were considering the case solved and closing it, and I could reopen it within 14 days. 
    I then called back and this time waiting 3 hours on hold, and the person who I spoke with (whose name I withhold for now) said he would reopen the case and they would call me within 24 hours... again he couldn't transfer me to them.  Again I forgot to reiterate the correct phone number that I had told them the first time since I was so mad about waiting 3 hours on hold.
    The next day, I realized that I had not reiterated the correct phone number, and I went into my account settings and changed the phone number in both places it exists, and then tried calling back to make sure they would call the correct phone number.  This time I waited on hold for 4 hours, and finally gave up without ever being able to speak to a person.
    The next day... still no call even to the wrong number since my Voice Mail would have informed me it there was a call.... I called Sales since that seemed to be the only way to talk to a real person, and screamed at them about this issue and was informed they couldn't do anything about Tech Support, or about associating my phone number with my case number, but he would put me in the queue for tech support since nobody was in the queue so they should call me back right away. 
    I did get a call in a few minutes, which said "If Valued Customer is available, press 1" so I pressed 1 and it went to music.  I then waited for 15 minutes of music with no answer, after which I got an email from my Voicemail Service transcribing the message saying:
    "Reschedule this call back for a later time press three to cancel this call back press nine. Your response was not recognized. Please try again. When valued customer is on the line press one to speak to a support specialist. If you need time to get valued customer on the line press two. To reschedule this call back for a later time press three to cancel this call back press nine. Your response was not recognized. Please try again. When valued customer is on the line press one to speak to a support specialist. If you need time to get valued customer on the line press two. To reschedule this call back for a later time press three to cancel this call back press nine."
    ... more. Please listen to your voicemail for the remainder of this message.
    They can't recognize me pressing 1?????  So who know... I was listening to music but did that mean I was really ever going to reach a real person, or was the Voicemail message correct and I would be listening to music forever?
    So this morning I tried calling again only to receive message the the Tech Support Telephone Lines were down for scheduled maintenance until August 10th... I tried chatting... that is offline also.
    Is there a way to associate my actual phone number with my case number... maybe somebody from Adobe actually reads these diatribes?  I need to be called at or after 17:00 Pacific time.... I was told the hours are on Pacific Time.... although  one representative who I was trying to coordinate the timing of the call with was very confused about the time zones. He was trying to tell me that the current time was 09:00 Pacific Time, which I knew to be wrong, and he finally admitted, after I challenged him to look on www.timeanddate.com, that it was  09:00 in Bangalore, and Pacific time was 20:00.

    Thanks for your answer TSN!
    I did try Chat yesterday and it didn't work.... said unavailable.  I'll will try it again. 
    I do understand that this is a Community Forum, but it appears that some Adobe staff persons do read and respond to some messages, so since all other avenues of contact seem to not work, I thought I would try this just in case somebody from Adobe happened to read it and could do something.
    A secondary reason I posted the whole explanation is that I thought maybe somebody else had experienced this issue as well and might comment on it.
    As for it being a problem or not, maybe it is not.  Adobe did work when I installed it.  When I invoked that icon "AAMLauncherUtil" the first time, it updated Acrobat Pro and Installed Creative Cloud (which the original trial subscription had not installed).
    I then noticed that these two icons didn't seem to do anything useful.  The first time I called and was able to connect to support, the rather poor attitude person who answered just said to delete both icons in the folder... that they weren't needed.  When I found that one of them could be deleted and not the other one "AAMLauncherUtil" could not be deleted, and since the tech support person had suggested deleting them both, I called back.
    The next rather clueless person in tech support spent a lot of time trying to help get rid of it, but couldn't.  When he was mucking around in the "Library" he deleted everything named "AAMLauncherUtil" from the Library (but left some stuff I would have imagined could have been deleted like references to my previous trial subscription.
    After he got done, Creative Cloud no longer worked and he couldn't figure out how to fix it... we were getting messages the Creative Cloud was corrupted and needed to be uninstalled.  He said he was going to refer the problem to a  higher level tech support, and that he couldn't transfer me there... they would have to call me which would be in 24 hours.
    The next day (since the higher level tech support failed to call back) I called Apple Support, and they helped me find a Creative Cloud Uninstaller and we ran that and re-downloaded and installed Creative Cloud again.
    I would expect from the name "AAMLauncherUtil" that this icon would Launch Adobe Application Manager and perhaps try to update my product(s) like it did the first time, OR report that my software is up to date... as most other software update attempts would do.  However what it really does now when I invoke the "AAMLauncherUtil" icon is just to open Creative Cloud just as if I had clicked on the icon in the top menu bar of my Apple Menu Bar.  The Apple person suggested that MAYBE it is supposed to do that if you have shut down Creative Cloud for some reason, and want to start it up again without restarting the computer.  Maybe that is so, but if it is, then I would have expected that they would have renamed the icon to Creative Cloud or something more descriptive of what it is supposed to do.
    As is is now, I am not sure if it is a leftover remnant of my original updated installation that should have gone away when I updated and it installed Creative Cloud, or if everyone else running Adobe Acrobat Pro XI has this icon in their Launchpad as well and it is supposed to be there for some unknown reason to perform some unknown function.
    After all that happened, I did update Creative Cloud, but that was within Creative Cloud itself when it reported having an update available, and not using the "AAMLauncherUtil" icon at all, so that would appear to negate it's possible update functionality wouldn't it?
    Assuming you are using a Mac, do you have such an icon in LaunchPad?
    Thanks for your help!

  • Associate image, icon, or thumbnail with an event?

    I've Googled around and I can't find anything on how to associate a small image with an event and have the image display in iCal.  For instance, I'd like to put a star on my iCal every day that I take a walk.  The idea is to "rubberstamp" a date, similar to what you can do in some Wii programs.  Any ideas?  Is this at all possible?

    I've Googled around and I can't find anything on how to associate a small image with an event and have the image display in iCal.  For instance, I'd like to put a star on my iCal every day that I take a walk.  The idea is to "rubberstamp" a date, similar to what you can do in some Wii programs.  Any ideas?  Is this at all possible?

  • My slideshow is built with PSE 7 (32 bits)(file : *.psess). I want open it with my new PSE 13 (64bits)

    My slideshow is built with PSE 7 (32 bits)(file : *.psess). I want open it with my new PSE 13 (64bits)
    Is this possible ? How ?

    Let's go step by step through that second set of instructions.   Here are screen shots of what happens when I move a catalog named "Test" that's starting out in the location Catalogs Accessible By All Users (after doing the first set of instructions).  If you don't see similar screens, perhaps you can describe exactly where it goes different.
    After doing File > Catalog, the Catalog Manager window looks like:
    After step 1. Select Custom Location:
    After step 2. Click the Browse button and select the destination location for the catalog.  I'm selecting an external drive G:
    After clicking the OK button:
    Note that it now says G:\ underneat Custom Location.
    After step 3. Select the current location of the catalog: All Users:
    Note that you also need to click on the catalog name ("Test" here) to allow the Move button to be clicked.
    After step 4. Click the Move button:
    After step 5. Select Custom Location:
    After step 6. Click OK:
    The catalog Test is now in the custom location G:\.

  • I am using both PSE 13 and Lightroom 5.  When I use Lightroom as an external editor and save the photo, it shows up in PSE13 as an edited file but does not look any different.  Why doesn't it appear edited?

    I am using both PSE 13 and Lightroom 5.  When I use Lightroom as an external editor and save the photo, it shows up in PSE13 as an edited file but does not look any different.  Why doesn't it appear edited?

    People who have Photoshop, but don't have Lightroom, need ACR so that they can use Raw files. Without ACR they could do nothing with those (they may also like having ACR so that they can work on other kinds of image using the same kinds of adjustments and techniques, as are used with Raw files).
    People who have Lightroom, can get access to Raw files regardless whether ACR is present or not. They can use Lightroom on other kinds of image also, using the same methods. LR can pass images directly into Photoshop without passing via ACR (or else does so transparently, which amounts to substantially the same thing).
    ACR does not, strictly speaking, even need to be installed for this external editing to happen. In fact, not even PS needs to be - since a different image editor can be used instead, while still retaining the Adobe Raw conversion etc.
    Lightroom "subcontracts out" specialised external tasks, in this workflow, but is still your "main contractor": the image is otherwise located, viewed, managed, adjusted/presented and output entirely using LR.
    So IMO we can divide image processing into:
    operations that involve pixels and layers and layer masks and adjustment layers etc (of the kind done inside Photoshop)
    operations that involve parametric edits (of the kind done in ACR where you are not using a Lightroom based workflow; otherwise, done inside Lightroom)
    When PS is called in, that's because those tasks are impossible or unsuitable to do in Lightroom. But those tasks can't be done in ACR either - by definition, since LR and ACR have exactly the same image processing "feature set".
    Lightroom is irrelevant to the Bridge + ACR + PS workflow. This workflow requires both your PS and your ACR to be current enough, to support your Raw format etc.
    ACR and Bridge are irrelevant to the LR + (image editor) workflow. It is in this case, only LR which needs to be current enough to support your Raw format etc.
    RP

  • Is it possible to print from Windows 8.1 to a printer connected to the USB port on an Airport Express?

    Is it possible to print from Windows 8.1 to a printer connected to the USB port on an Airport Express?
    a) HP printer with USB port only (no ethernet port) connected to Airport Express
    b) No issue printing from Macs
    Tests
    1) Installed Bonjour 2 - does not find printer (now uninstalled)
    2) Bonjour 3 is listed in programs but no way to access
    3) Using TCPIP address (and no Bonjour) gives 'Unsupported Personality' error when printing test page
    Regards
    Richard
    p.s. why are all Windows 8.1 questios n the forum 'Locked' with no reply?

    This is possible, but not with Bonjour or any other fixes.  It is just a printer set up based on the Port name of the Airport, 10.0.1.1.
    I found the answer on YouTube, Title: Windows Printing For Apple AirPort Extreme without Bonjour Wireless wifi.

  • Photosmart C410: How do I associate a custom paper size with the photo tray?

    Our Photosmart 3310 recently broke down and I purchased a C410 to replace it.  I sell a small item online that I ship in 3 5/8 x 6 1/2 envelopes.  With the 3310, I had figured out a way to print the envelopes from the photo tray.  While Word 2007 allows me to select the photo tray, the printer would not print from there until I created a custom paper size in the printer preferences dialog box.
    One of the reasons I got the C410 was for the photo tray.  It's a real pain to have to swap out the regular paper and stick in one evelope every time I want to print another envelope.  Well, unfortunately, that's what I've been doing.  I select the photo tray in Word, but the printer goes right ahead and prints from the main tray.  I had forgotten what I did to make it work on the 3310, so I experimented with that printer's drivers until I figured it out.
    My problem is that the software interface for the C410 is different than that for the 3310.  I can't figure out how to associate a custom paper size with the photo tray.  To test my theory this evening, I told Word that my envelope size was 5 x 7.  The printer didn't hesitate to take an envelope from the photo tray.  Of course the return address went into a dark void because the envelope is not 5 x 7.
    The difference between the two interfaces is that the 3310 has both printing shortcuts as well as "Print Task Quick Sets."  The C410 only has printing shortcuts.
    If anyone can help me, I'll be very grateful!  I've probably spent hours trying to get this figured out, and I have no idea what to do.

    Hi,
    Which Microsoft product (application) are you using ? Printer supports the following custom sizes:
    From ADF: Custom-sized media (ADF) between 127 to 216 mm wide and 241 to 305 mm long (5 to 8.5 inches wide and 9.5 to 12 inches long)
    From input tray: Custom-sized media between 76.2 to 216 mm wide and 101 to 762 mm long (3 to 8.5 inches wide and 4 to 30 inches long)
    You need to select right custom size from the application.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HT201303 how do i associate a different apple ID with my ipad?  I need to do this bc my gmail account was hacked and a hoax email sent out from it. so i opened a new gmail account and want to associate this new email with my ipad

    how do i associate a different apple ID with my ipad?  I need to do this bc my gmail account was hacked and a hoax email sent out from it. so i opened a new gmail account and want to associate this new email with my ipad

    To check if you have a virus, you can download ClamXav
    also, go to Applications>Utilities>Activity Monitor and see if there's anything that you don't recognize, and check your sent email to see if you've been sending emails without your knowledge.

  • I have two Apple IDs - one associated with iPad and iPhone and the other associated with iMac and MacAir. I am going to lose the former e-mail address imminently and would like to associate all devices with just one ID. How do I do this? Thanks

    I have two Apple IDs - one associated with iPad and iPhone and the other associated with iMac and MacAir. I am going to lose the former e-mail address imminently and would like to associate all devices with just one ID. How do I do this? Thanks

    Thanks - I guess it is like there were two of me!
    I bought the iPhone first and it seemed natural to link it to the (work) e-mail address which was in constant use. The iMac for home use came next and it seemed natural to use my home e-mail address, particularly as I knew by then that I would lose the work address after my imminent retirement. The same logic went for the recent puchase of the MacAir. I am not sure what happened with the iPad (also a recent purchase) - iTunes seemed to puch me towards the same ID as the iPhone.
    It is not a huge problem - just makes my persona look schizoid! Otherwise very happy with everything Apple.

Maybe you are looking for