In SXMB_MONI_BPE

Hi
I want to activate my IP
In SXMB_MONI_BPE -
> process selection
I gave my service ID, when I execute
"No work item exist" message is displayed in the bottom.
What is meant by this message
Do I have to enter any value in the selection using Work Item ID---Identification ?
Thanks,
Srini

Srini,
Multiline is possible not only for File to File , you can design and split the messages according to your reqmt. Consider the below example.
Input Structue(Outbound)
<MT_Records_OB>
<Employee_Master>
 <Name>Raj</Name>
 <Age>25</Age>
 <***>Male</***>
</Employee_Master>
<Employee_Master>
 <Name>Srinivas</Name>
 <Age>25</Age>
 <***>Male</***>
</Employee_Master>
<Employee_Master>
 <Name>Michael</Name>
 <Age>25</Age>
 <***>Male</***>
</Employee_Master> <Employee_Master>
 <Name>Bhavesh</Name>
 <Age>25</Age>
 <***>Male</***>
</Employee_Master>
</MT_Records_OB>
I want to split the file and send it separately for each <Employee_Master> record.
So what you have to do, first you have to split the message as using one message mapping.
<MT_Records_IB>
<Employee_Master>
 <Name>Raj</Name>
 <Age>25</Age>
 <***>Male</***>
</Employee_Master>
</MT_Records_IB>
<MT_Records_IB>
<Employee_Master>
 <Name>Srinivas</Name>
 <Age>25</Age>
 <***>Male</***>
</Employee_Master>
</MT_Records_IB>
<MT_Records_IB>
<Employee_Master>
 <Name>Michael</Name>
 <Age>25</Age>
 <***>Male</***>
</Employee_Master>
</MT_Records_IB>
<MT_Records_IB>
<Employee_Master>
 <Name>Bhavesh</Name>
 <Age>25</Age>
 <***>Male</***>
</Employee_Master>
</MT_Records_IB>
Then finally in BPM using for-each block send the message to file -system. I hope it clears your doubt.
Best Regards,
raj.

Similar Messages

Delete Workitems in PI 7.1 at Transaction SXMB_MONI_BPE

Hello,
I am new here and working at an integration process at PI 7.1. While testing it, only one process instance produced many many workitems with status completed.
I recognized that all trials to start a new process instance failed, because the process engine assignes all new start messages to the already existing instance
Is there a possibility to delete all those completed Items in transaction SXMB_MONI_BPE or any other transaction? Or to kill the existing process instance?
Many thanks for your help!
Yours Franziska

HI ,
You can Logically Delete the Work Flow which means it will kill the execution of Work flow.
Use SXMB_MONI_BPE --> Process Selection --> select your workflow and click on button logically Delete workflow.
Normally you should not delete or manually complete the work flows.
Regards,
Anurag Garg

No work item exist in sxmb_moni_bpe

Hi experts,
iam working with a senario using BPM iam not able to execute my senario plz help me in this case.
Senario details.
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
check above link i have done same senario.when iam executing it iam getting an error in SXMB_MONI_BPE (No work item exist).now plz help me what to do.
Regards,
Phani

Hello Phani,
Go to SXI_CACHE--->Integration Processes
Identify your service and check the return code, it should be 0.
If this is not 0, then Repeat Activation, this will happen when your user doent have sufficient authorizations.
Let me know if it was not the case...
Regards,

Failed process not in SXMB_MONI_BPE list

Hi,
I'm on Pi7.1 and have a BPM monitoring related problem: In SXMB_MONI I can see, that my process was aborted due to a faild send action (target system not reachable). When I invoke SXMB_MONI_BPE the process instance is not contained in the list of failed processes. Analyzing the BPM inbound processing queue (SQM2) I can find a stuck queue exposing the error messages "Permanent error in BPE inbound processing".
Does anybody have an idea, why the related business process is not contained in the list of faild processes in SXMB_MONI_BPE? - this was the case on XI3.0 -
Kind regards,
Heiko

Hi Heiko,
Check the OSS note 1126656 - BPE-TS: Permanent errors in the BPE inbound processing
In parrallel goto TCODE "SWF_XI_CUSTOMIZING".
Check whether ,any errors are there.
All entries related workflow or integration process should be with out any errors and active.
Regards,

SXMB_MONI_BPE - Message Payload not visible in container

I have a message that is failing a mapping within an Integration Process. This is an Async process end-to-end. I have trace_level set to 3, and logging/logging_propagation/logging/sync set to 1.
I view the failed workflow in SXMB_MONI_BPE/list with technical details and see the mapping step that errored. I click this and look under "container". I then drill down to messages and see 1 message going into the mapping. Under this there is some Header information but NO Payload. How can I get this to appear here? Ideally I'd like this to be logged only for error'd workflows.
The mapping exception also does not get propagated back up to sxmb_moni level so the only way to see it is in the alert that's raised/inbox, the defaultTrace or sxmb_moni_bpe. Is there a way to do this (I seem to recall I couldnt do this in XI 3.0/14)? I'm using XI 7.0/12. I do not want a custom alert, just the standard text like you see in the mapping test tool (xxx cannot be produced due to yyy).
Thanks,
James.

Yep, have done that, but 2 issues:
Firstly, it doesnt help ongoing supportability where seeing why a message failed through quick and simple tools like sxmb_moni is quite important.
Secondly because of other dependancies in predecessor steps, I have to do a bit of fiddling around to test it. Not helped by the fact that the Message Mapping test tool doesnt seem to want to show me the xml it produces from a previous mapping (It shows the grid ok, but not the xml !! ) so actually I can only semi-guess the data passed to the map. Hence why I originally wanted to see the message that was passed in the container variable of sxmb_moni_bpe.
Cheers
James.

How to Check BPM success or fail in SXMB_MONI_BPE ?

Hi Experts
      Help me...and i am new to BPM
      I have done a simple BPM scenario and i am not sure it is working fine or not
     So I open TS code : SXMB_MONI_BPE and here how to check the BPM
     Working find or not ? if success means what is the response number?
     Failure means what is the response number ?
     Can any one explain me in detail....step by step of Monitoring of BPM?
Adv thanks and Points
Prasad K

Hi Prasad,
Two ways you can check your BPM has successfull or not.
1. Go to SXI_CACHE , Double click on Integration Process Check the Return Code has 0. If return code Non-zero, select the Integration Process and activate now it will come to the Return Code is '2' again activate and you will get Return Code as '0'.
2. Go to SXMB_MONI or SXI_MONITOR or SXMB_ADMIN
Execute the XML message, find out your message and that message has 'PE' that means that is a BPM message.
Click on PE you will see how BPM steps worked in your scenario where it failed exactly.
select the particular step and In Application toolbar there is ICON called 'Technical overview' click the buttion it shows the everything.
Regards,
Venu.

CcBPM - process stopped and SXMB_MONI_BPE without entries

Hello,
We have a strange behaviour of ccBPM on SAP PI 7.01.
Sometimes ccBPMs are not working properly.
So e.g. process is not started or in SXMB_MONI_BPE showing that a wrong lane after a switch is started.
Usually we could resolve that by reimporting the Int.process from the Repository or by adding a dummy container step.
But now the behaviour is really strange (but only for one of 6 ccBPMs implemented. So 5 are running fine)
a) ccBPM is not started, only SXMB_MONI shows the step to start the BPM as successful.
(After doing a small change in the ccBPM, which was tested successfully the week before).
b) Adding a dummy step (simply container with an append) enables the process to start.
Test for switch lane 1 is successful
Test for switch lane 2 fails. SXMB_MONI_BPE shows that switch lane 1 is choosen.
But the comm.channel monitor shows that the first step in switch lane 2 was started successfully.
(Connect via JDBC to select data)
c) Adding another container dummy step in switch lane 2 and reimporting the int.proc. into Int.Dir. results in:
SXMB_MONI shows all steps up to switch lane 2 step one (select of data)
-> SXMB_MONI does not show any entries for the started ccBPM.
d) Removing all dummy steps does not change the situation.
So at the end we deleted the implementation of the Int. process and rebuild all the objects using new names for the Int.Proc and its Config.Scenario.
Is there anybody with similar experience for such strange behaviour.
Best Regards
Dirk

Hi Heiko,
Check the OSS note 1126656 - BPE-TS: Permanent errors in the BPE inbound processing
In parrallel goto TCODE "SWF_XI_CUSTOMIZING".
Check whether ,any errors are there.
All entries related workflow or integration process should be with out any errors and active.
Regards,

Mapping log without SXMB_MONI_BPE?

Hi
I have a integration process that occasionally lasts for hours. For business users to be able to handle any errors in the process i have built in a "log" message that is update during the process execution - the message is not sent anywhere before the process ends. Everything works fine until in a message mapping occasionally the log message contents is lost. Something that I can not help (a XI bug).
I have managed to find the message with SXMB_MONI_BPE... finding the mapping and opening input messages. But a few days ago a situation arose where before mentioned transaction could not open the full "graphical" log of a process - the process lasted for about 3 hours and a time out is reached. So I am unable to open the mapping container where I can find the messages.
So the question is... Is there any other tools/transaction to find a message that was created in a business process and that has note moved out from it?
When I browse for some steps in the result listing of SXMB_MONI_BPE, then the item display shows only the time of execution and result of processing.
So is there (a/another) way to read a message from a process log?
Thanks for any hints...

Hi,
if you send many messages from this process you will see
the message in SXI_MONITOR - all of them
but processes lasts for 3 hours is pretty long...
maybe you can check the desing once more
and so something better ?
Regards,
Michal Krawczyk

Unable to start subflow in SXMB_MONI_BPE

Hi,
Due to a basis problem all interfaces are stopped during six hours.
After that when service is restarted i've tryed to reprocess stopped bmp's in SXMB_MONI_BPE transaction.
But most of them continue in error and message "Unable to start subflow" is showed.
¿how can I restat these workflows?
Thanks, in advance
Carme.

Hi,
Check this threads
[ccBPM - Can't restart message in SWF_XI_SWPR - No payload found;
[SWPR issue;
Also check this note as well
Note 1551422 - NetWeaver BPM:Collective Note for NW BPM 720 SP04
Regards,
Venkata S Pagolu

BPM send step not executed in BPM (after Message split)

Hello everybody,
we use BPM:
We have a paralell Block which should send the rows of a multiline element. In SXMB_BPE_MONI the send step is not executed?
Any idea?
Thanks lot, regards Mario

HI,
Go to SXMB_MONI_BPE->and check the workflow log (technical details).and go to SXI_CACHE and check the return code of the Integration Process. It should be zero. If not try to activate the same
If there is no error then go with like this-
Also check the Syntax in Integration Repository with F7. Change the IP and activate it. If there is no syntax errors.
Then reimport the IP into Directory and then test your scenario
Regards,
Moorthy

Sending data to targer one message at a time

Hi
I have a file -> http scenario.
in the file there is customer data with multiple customer records.
I have to send these customers to the HTTP client one cust at a time. how can i do this and what can be the mapping cardinality.
and how will the bpm look like
thanks
nikhil

HI Jai,
I checked the sxmb_moni the HTTP message is in there. but there is no message from the IP going out .
I even checked the sxmb_moni_bpe . in there the last work item mentioned is block. it seems to me that the send step inside the block was not processed.
i was getting a problem and that was while assigning the current line in the block step the container created at the process level was not getting accepted. so i had to creat the container at the block level. and the same i assigned to the send step to .
if you can figure out something then please do let me know
Thanks
Nikhil

What are the main transaction codes in XI?

What are the main transaction codes in XI?

SAP XI TRANSACTION CODES
ALRTCATDEF- Alerts Configuration.
ALRTDISP - Display of Alerts Created
SXMB_IFR -> Start Integration Builder
SXMB_MONI -> Integration Engine - Monitoring
SXI_MONITOR -> XI: Message Monitoring
SXI_CACHE -> To Access IS runtime cache
SXI_SUPPORT -> Test all the Repository and Directory Objects
SXI_CACHE -> XI data directory cacheidx1 -> idoc adapter
IDX2 -> idoc metadata
IDX5 -> monitor idoc adapter
SM21 -> log di sistema
ST22 -> dump abap (analisi di eccezioni)
SMQ1 -> messages inbound e outbound queue
SMQ2 -> messages inbound e outbound queue
SMICM -> J2EE administration
ST06 -> stato della macchina cpu memory filesystem machine status - cpu, memory and file system.
ST03 -> workload.
SCC4 -> visualizza mandanti del sistema
WE20 -> partner profiles
sale - ale settings
RZ10 - edit system profile
SM59 ->mantain rfc destinations
BD64 -> mantain distribution model (trasformazioni)
SU01 -> users
AL08 -> list all logged users(user login logon)
SE10 -> Change Request
SE09 -> Change Request
WE05 -> All idocs
WE19 -> IDoc Test Tool
WE21 -> port definition
SE11 -> Data dictionary
SM21 -> log sistema xi
se37 -> mantain funcion modules
SICF -> http server configuration
SMGW -> trace, alzare livello di trace.
BD13 ->
BD64 -> modelli di distribuzione
PFCG -> Roles
tabella TSTC -> sap transactions codes
tabella TSTCT -> transaction descriptions
STMS -> transports management
SPAM -> apply ABAP support packages
SPAU -> manage objects after apply support packages
SE01 -> manage change requests
SLDCHECK -> Test SLD Connection
SLDAPICUST-> SLD API Customizing
SXMB_ADM -> Integration Engine - Administration
SXMB_MONI_BPE -> Process Engine - Monitoring
SE38 -> ABAP Editor
SE11 -> ABAP Dictionary
ST22 -> ABAP dump analysis
SPROXY-> ABAP Proxy Generation
SE80 -> Object Navigator
ABAPDOCU -> ABAP Documentation and Examples
SE24-> Class Builder
SM21-> Online System Log Analysis
SMQ1-> qRFC Monitor (Outbound Queue)
SMQ2-> qRFC Monitor (Inbound Queue)
RZ70-> SLD Administration
SM58-> Asynchronous RFC Error Log
SM59-> RFC Destinations (Display/Maintain)
SMICM-> ICM Monitor
WE60-> Documentation for IDoc types
BD87-> Status Monitor for ALE Messages
IDX1-> Port Maintenance in IDoc Adapter
IDX2-> Meta Data Overview in IDoc Adapter
WE05-> IDoc Lists
WE02-> Display IDoc
WE19-> Test tool
WE09-> Search for IDocs by Content
WE20-> Partner Profiles
WE21-> Port definition in XI
SE16-> Data Browser
SE93-> Maintain Transaction Codes
SM30-> Call View Maintenance
SU01-> User Maintenance
SM02-> System Messages
BD54 -Logical System Creation.
SWXF_PBUILDER -> for Detail BPM Process
SMQS - > to register the destination in QOUT scheduler
WEOUTQUEUE - > to start the queue processing
SMQR - > to register the queue
IDXPW - > to activate the IDOC message package
IDXP - > to monitor the message packages.
SWF_XI_CUSTOMIZING -> transaction to check prerequisites for integration processes.
http://www.erpgenie.com/abaptips/content/view/452/62/

BPM Error:Runtime handle of object type could not be created:CX_MERGE_SPLIT

HI Guys...
I am working on a RFC to HTTP scenario:
It is a standard SAP interface ....so we created only ID objects..obviously the BPM delivered by must be correct.
in sxmb_moni_bpe it is throwing th following error texts:
Runtime handle of object type could not be created
Error executing service for node
Exception CX_MERGE_SPLIT occured
component mapping has returned an error
unmodeled exception when executing service for node
No payload found
object FLOWITEM method EXECUTE cannot be executed
I tested the mapping payload from sxmb_moni in IR and it is working fine.
Receiver is an HTTP so could not able to find exactly whats happening as no thrid party tools can be installed....struck up here.
Any iputs will be of help in this area.
Thanx in adavance.
Kiran

any inputs around this plz??

Exception in BPM

Hello Dear Community ,
I have an asynchronous scenario using BPM and it's working well.........
Start->Receiver->Transformation->Send->Stop
I inserted a Container operation and Control using Michal's Blog "Alerts with variables from the messages payload (XI) - UPDATED" /people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated to send an alert and it worked well too.
I move the Container and Control Steps to an Exception Block.....but when mapping error occurs It seems to be that the Exception isn't caught and the alert is never send...
I did next steps:
- I inserted a block and I entered the exception "runtime".
- I add an exception handler branch and I entered the exception "runtime" in the exception handler attribute.
- In the transformation step I entered the exception "runtime".
- I moved the Container operation and the Control step into the exception branch.
My doubt is if I can catch any exception in the BPM. In this case the mapping error was due to a bad index using the substring function.
Or is it necessary to throw the exception explicitly in the mapping ?.
thanks a lot for your help.

First, check whether your BPM instances have "COMPLETED" status in SWWL (or SXMB_MONI_BPE, but SWWL is simpler; don't delete any instances though ).
If there are any instances with "ERROR" status in SWWL, then your BPM is having problem before that and is not even getting to the exception throwing step.
You can double click the BPM name in order to go into technical workflow (and from there you can check which steps executed with errors).
If all the instances are ok, make sure that the exception branch was not executed.
Go into the BPM technical workflow and check which steps were executed. Make sure that the steps in exception branch were not.
If they were executed, then the problem is with your alert. Maybe it was not defined correctly.
If they were not, then the problem really is in exception throwing.
Which exception did you expect to happen? Are you sure it had happened?
Get the payload which is used in Transformation Step (from SXMB_MONI message which goes into BPM) and test it in Message Mapping (or Interface Mapping) test tab.
Regards,
Henrique.

Help with merging files and calling SOAP adapter in BPM

Hello All,
I have a scenario, where am merging a header file and item file and calling a webservice in ECC. The requirement is that the no. of calls to the webservice depends on the no. of lines in the header file. Mapping is developed according to this rule and the operation mapping is also set for multiple messages. Testing the mapping produces required results.
But when I run the scenario invoking BPM to merge the files with 2 lines in header records the webservice is called just once. On further analysis into SXMB_MONI_BPE, MESSAGES_OUPUT table in the mapping step has 2 messages. The instance ID of the message gone out shows a checkered flag with processed successfully status, but the second line is stuck in status "Transfer To Process Engine" .
Any thoughts what I should be doing to push second message out automatically.
Prashanth

Hi Prashanth,
to find out what has happened to the message try checking the workflow log,
i.e., select the message with the 'Transfer to Process Engine" status in SXI_MONITOR and drill down in the outbound PE column.
Once in the workflow log select 'List with Technical Detailsu2019'.
Regards
Kenny

In SXMB_MONI_BPE

Similar Messages

Maybe you are looking for