Include a Test Frequency in Reports and Database

I'm running a multiple numeric limit test on a product uisng the TestStand looping function. On each loop, I change the frequency of a signal generator. I need to capture the frequency in the test report and data base. The frequencies are stored in a parameter array and passed to the Labview routine using the loopindex. The report shows the loopindex, but I need to replace this information with the test frequency. I do not want to create a limit test for the frequency. I'm already using the "reporttext" for other infromation. Any ideas?

Hi Bill
I have done a small test programm. Is this what you are looking for.
Take also a visit to this thread:
http://forums.ni.com/ni/board/message?board.id=330&thread.id=18374
If i am wrong, please post an example
Greetings
juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=
Attachments:
Loop.seq ‏7 KB

Similar Messages

Forms, Reports and Database

Hi,
I've a lot of problems with Oracle Forms and Reports 6i.
I've two server, on the first I've installed my db (its IP address is 192.168.1.10 ) and, on the second, I'd like install Forms and Report server(its IP Address is 62.XXX.YYY.ZZZ).
I've installed Oracle Client on Forms/Reports machine and I can connect to my db through Tnsping but not with sql+!
Does anybody help me?
Best regards,
Simone
null

The error is Connection Time out!
Thanks in advance,
Simone

JTables and frequency count report

Is it possible to use jTable and make the cells un-editable and have it set up where if you click on a cell it could perform a specific action? I�m working on a program that calculates a frequency count report and I want to be able to click on the cell and have it display in another window the observations that contributed to that cells count. Is this possible using jTable or is there a better way to get what I want? Thanks for any suggestions.

Yes, it looks to me as if it should be possible.

Financial Reports and Attribute Dims

Hi,
Is it possible to include Attributes in a Financial Report and subtotal by the particular Attribute by employee? For Example:
Column Definition has Account = Insurance Cost with a scenario version etc.....
Jan Feb Mar Qtr1
Smith, John Cigna PPO 10 10 10 30
Jones, Justin Cigna PPO 12 12 12 36
SubTotal - Cigna PPO 22 22 22 66
Long, Brad Kaiser 30 30 30 90
Harvey, Bill Kaiser 24 24 24 24
SubTotal - Kaiser 54 54 54 54
Grand Total 76 76 76 120
Where Column 2 'Type' is an attribute assigned to the Employee in Column 1. Also what if column 2 was a 'SmartList' in Accounts dimension instead? Right now outline is a Smart List however getting it to Subtotal is impossible I think as the SmartList is an Account named 'Plan Type' thus it has t be in columns as the report has Account = Insurance Cost in the column definition too.....

Hi
In answer to your first question yes it is possibe to report a dimension by its associated attribute. You will need to drag the attribute dimension and the employee dimension onto the rows for the grid. You may want to play around with whether the attribute dimension comes before or after the employee dimension to see whether there is a noticeable performance difference.
If I am reading your post correctly you currently want to have:
Column1 - Employee
Column2 - Attribute / SmartList
Column3 - Account (Insurance) > Jan
Column4 - Account (Insurance) > Feb
Column5 - Account (Insurance) > Mar
Column6 - Account (Insurance) > Q1
This will work fine for an attribute but if you want Column 2 to be a smartlist then you would have to put your account dimension into columns and that would mean that your smartlist would have to appear in only 1 period, i.e. if it changes from Jan to Feb then you would need more than one column to report it. It will also be harder to get a subtotal using a smartlist, with an attribute the subtotal will naturally be available by selecting the top member of the Employee dimension with your attribute (it will dynamically sum all members with the attribute you are calling).
Hope this helps
Stuart

How to create a custom report and include multiple extended CRM database?

I have created a number of CRM databas extensions and applied all there fields to my contacts and cases.
I might have for example:
- Additional address details
- Business information
- Quote Details
- Trade Referees
I know how to run a custom report and that I can select any one of these extra CRM databases as a filter and included them in the report. Is there a way though to add more than one (preferrably all) of the extra CRM databases to the report?
The onely ways I can see it work is by either include all fields in one extra CRM database (not ideal) or bu running multiple reports and merge them somehow in Excel.
Is there another way that I am not aware off?
Thanks for your help,
Jerun

Hi Jerun,
There's no way to do that. You'll need to run separate reports and merge them in Excel.
-m

AS 10g SE now includes Reports and Discoverer?

I've read some articles about the "new" AS that it has been "re-packaged" (licensewise) and that the BI stuff like Reports and Discoverer are included in the Std Ed. Also (in the FAQ I think) that some EE stuff has been moved "down" to SE - sounds promising! But I have not been able to verify this... Anyone out there?

I urge Oracle do the same for Discoverer.
We have been using Discoverer since 3i. This year, we had some people on 3i still and some on 4i. We went through the conversion to 4i and no one is using 3i at all now. These people are very used to how Discoverer works. They are used to using database authentication and security to workbooks.
The Infrastructure can store connection information for each user. By default, it stores connection information in cookies on the user's machine but you can configure the Infrastructure to store this data for you. The Infrastructure also stores metadata for Discoverer Portlets (Portal required).
So that is it. If you are not using Portal nor care about storing connection information in a database, then why even have the Infrastructure for Discoverer? Just like Reports and Forms, if you aren't using SSO or Portal, there is no need for the Infrastructure and Oracle should provide an installer to let you install Discoverer without having the Infrastructure sitting there.
Here is the doc on Metalink that explains what the Infrastructure does with Discoverer 9i.
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=224871.1
I also spoke with John Entenmann at ODTUG in Miami this year and asked him if Discoverer works and is supported in an install without the Infrastructure. He agreed that if you are not using Portal or SSO, you don't need the Infrastructure with Discoverer 9i.
Now Oracle needs to support Discoverer customers in the same way they are going to support Forms and Reports customers by providing a more reasonable installer that doesn't require the Infrastructure to be installed first.

Upgrade Preparation: How to map applications, DTS packages, SSIS packages and reports to databases

Hi,
I am on the initial phase of upgrading SQL Server 2005 to SQL Server 2012. Right now, I'm taking as much inventory as I can from our current server, SQL Server 2005. If anyone could help me, how can I map the following:
Map applications to databases
Map DTS packages to databases
Map SSIS packages to databases
Map reports to databases
Thank you!

Some questions and suggestions:
How are we planning to upgrade whether in-place\parallel\others?
Will this be with HA[Clustered one] or with standalone?
Do you have time to do actual migration from now on and you will need to setup the environment for end to end testing for application validation so that all differences between application or system variables can be known before actual deployment?
Also, it will be good to check with Upgrade Advisor for below pointers preparedness too.
Map applications to databases: If you have already need to setup databases and logins for each and every applications then your mapping to database for applications will be lot easier and you will have less challenge.
Map DTS packages to databases: Good link to check
https://www.simple-talk.com/sql/ssis/dts-to-ssis-migration/
Map SSIS packages to databases: Good link to check
http://www.experts-exchange.com/Database/MS-SQL-Server/Q_28340818.html http://www.sqlservercentral.com/Forums/Topic1531839-2799-1.aspx
Map reports to databases -- Good link for Reporting Services if you meant that:
http://msdn.microsoft.com/en-us/library/ms143747.aspx
http://www.mssqltips.com/sqlservertip/2627/migrating-sql-reporting-services-to-a-new-server/
Good link to check other thing as well :
http://thomaslarock.com/2013/03/upgrading-to-sql-2012-ten-things-you-dont-want-to-miss/
Santosh Singh

Does EBS license include tools for reporting and extracting data (queries)

Hello,
I'm recommending Oracle EBS to a customer and I need to mention what tools for reporting and extracting data (queries) are included in a Oracle EBS license.
I hope you can help me with that information, or at least with providing me the place where I can get the info.
Thanks in advance,
A/P Sergio Maestri

Hi,
Thanks, I think the same ... but the customer asked me about it ... I supose my answer will be that he can use Reports Builder for reporting and Toad or PLSQL Developer to access to the database and make queries ...
What about XML Publisher ? ...it can be used to make reports against an Oracle EBS database and integrate them into the EBS Application ?I believe you need a developer license to use Oracle Developer (Forms/Reports) for customizing/creating reports.
Global Pricing and Licensing
http://www.oracle.com/corporate/pricing/index.html
And IINM, the same thing applied to XML Publisher -- See this thread for a similar discussion.
eBiz & XML Publisher - Confusion
http://forums.oracle.com/forums/thread.jspa?messageID=3834445
Please contact your Oracle sales representative, he/she is the best one to answer such questions.
Thanks,
Hussein

By default, Teststand will not include the test step result in subsequence, is there any way to include these step result in report?

By default, Teststand will not include the test step result in subsequence, is there any way to include these step results in report?
Thanks
Jacky

Hi,
If your subsequence is in a separate sequencefile, then check the properties of the sequencefile to make sure that the record has not been disabled.
Regards
Ray Farmer
Regards
Ray Farmer

I run Dev 6i on Windows 2008 R2 64-bit,the forms are working fine after connection to the database but the reports continue to request for username, password and database connection string every time i try to open a report.

I receive REP-0501: Unable to connect to specified database. I run developer 6i application on windows 2008 r2. I have applied the nn60.dll and nnb60.dll files to the \BIN directory. The forms are working fine. The reports will only display after the correct user id (username, password and database connection string) is supplied. This is happening to all attempts to open already complied form. Pls, help.

If you are connecting to an Oracle 11g database, remember that by default the passwords are case sensitive. To disable that, run
ALTER SYSTEM SET SEC_CASE_SENSITIVE_LOGON = FALSE;

Database 'TEST' is already open and can only have one user at a time.

Hi all,
Could some help on this issue as per urgency!
Database 'TEST' is already open and can only have one user at a time.
I also tried this command but having the same error, please let me know how to troubleshoot this issue
Use Master
GO
Select * from master.sys.sysprocesses
Where spid > 50
And dbid=DB_ID (‘StuckDB’)) -- replace with your database name
Thanks

Hi Tony,
sorry got the same error again, it can't allow me sp_who2 as well
I tried above command got the following error
Changes
to the state or options of database ‘TEST’ cannot be made at this time. The database is in single-user mode, and a user is currently connected to it.Msg 5069, Level 16, State 1,

Run time for Report saved in local machine and Database

Hello,
I have a report that runs in 5 seconds in Discoverer Desktop. When I saved the same report in database(File->Save As - in Database) it takes more than 40 mins. I haven't made a single change to the report before saving to Database. Has anybody come across this? Please help me find the problem.
Thanks.

Hi,
this is just how the Internet works and also how file displays work. Everything you view, listen to etc. in your browser gets saved as a temporary file on your computer. You can't even view a simple html page without having it saved on your computer for a short time. I can't think of anything to prevent this from happening.
Also, if you generated the file yourself, how is that a security threat to your client? He should be sure the file is safe.
Best regards!

Creating Report and connecting to database

Hi I am trying to create a report using Crystal Reports and VB.net, However when I use the database expert to connect to the database I get
the error code 0xbe9, cannot open the database.
It sometimes work and sometimes do not.
Please help
Regards
Navin

Hi Navin
1) What version of CR - please be precise. If this is a stand-alone designer go to "Help | ABout...". If this is a CR bundle for VS, quote the version of crpe32.dll.
2) What version of .NET?
3) What database?
4) How are you connecting to the database?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow me on Twitter

DB link problem between active Data Guard and report application database

My database version in 11.2.0.2.0 and OS is Oracle Solaris 10 9/10.
I am facing a problem in my Active data guard Database for reporting purpose. Active Data guard information is as below.
SQL> select name, database_role, open_mode from v$database;
NAME DATABASE_ROLE OPEN_MODE
ORCL PHYSICAL STANDBY READ ONLY WITH APPLY
Problem detail is below
I have created a db link (Name: DATADB_LINK) between active data guard and report application database for reporting purpose.
SQL> create database link DATADB_LINK connect to HR identified by hr using 'DRFUNPD';
Database link created.
But when I run a query using db link from my report application database I got this below error.
ORA-01555: snapshot too old: rollback segment number 10 with name "_SYSSMU10_4261549777$" too small
ORA-02063: preceding line from DATADB_LINK
Then I check Active Data Guard database alart log file and get below error
ORA-01555 caused by SQL statement below (SQL ID: 11yj3pucjguc8, Query Duration=1 sec, SCN: 0x0000.07c708c3):SELECT "A2"."BUSINESS_TRANSACTION_REFERENCE","A2"."BUSINESS_TRANSACTION_CODE",MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'feature' THEN "A1"."TRANS_DATA_VALUE" END ),MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'otherFeature' THEN "A1"."TRANS_DATA_VALUE" END )
But the interesting point if I run the report query directly in Active Data Guard database, I never got error.
So is it a problem of DB link between active Data Guard and other database?

Fazlul Kabir Mahfuz wrote:
My database version in 11.2.0.2.0 and OS is Oracle Solaris 10 9/10.
I am facing a problem in my Active data guard Database for reporting purpose. Active Data guard information is as below.
SQL> select name, database_role, open_mode from v$database;
NAME DATABASE_ROLE OPEN_MODE
ORCL PHYSICAL STANDBY READ ONLY WITH APPLY
Problem detail is below
I have created a db link (Name: DATADB_LINK) between active data guard and report application database for reporting purpose.
SQL> create database link DATADB_LINK connect to HR identified by hr using 'DRFUNPD';
Database link created.
But when I run a query using db link from my report application database I got this below error.
ORA-01555: snapshot too old: rollback segment number 10 with name "_SYSSMU10_4261549777$" too small
ORA-02063: preceding line from DATADB_LINK
Then I check Active Data Guard database alart log file and get below error
ORA-01555 caused by SQL statement below (SQL ID: 11yj3pucjguc8, Query Duration=1 sec, SCN: 0x0000.07c708c3):SELECT "A2"."BUSINESS_TRANSACTION_REFERENCE","A2"."BUSINESS_TRANSACTION_CODE",MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'feature' THEN "A1"."TRANS_DATA_VALUE" END ),MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'otherFeature' THEN "A1"."TRANS_DATA_VALUE" END )
But the interesting point if I run the report query directly in Active Data Guard database, I never got error.
So is it a problem of DB link between active Data Guard and other database?
Check this note which is applicable for your environment
*ORA-01555 on Active Data Guard Standby Database [ID 1273808.1]*
also
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:8908307196113

Crystal Reports and Access database connection error

I had this in a different forum with no hits, so I am trying this one.
A person that I work with has multiple reports set up that pulls from an Access database that is password protected. When we moved everything over to a new computer, those reports now say that it cannot access the fields inside the database. It never pops up with a login screen either, like it does on the old computer. I played around with the ODBC, with no luck, couldn't get anything to work. I have also tryed relinking the database, but I keep getting connection problems. We are on a network, so her settings should have all moved with the new computer. Along with the database and the reports being on the server, so they were never moved. I am thinking it has something to do with a system file.
I also found this document on this site, but cannot find the download it mentions, sounds similar to my problem.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/208b8fe5-681e-2b10-d2bb-b201f266d0ab
Does anybody know how to fix this without the utility mentioned in the above link, or know where I can get the utility??
We are using Access 2007 and Crystal Reports 7. The database is not save as an Access 2007 database, but a regular mdb.
Please Help!

Post Author: ejthunder
CA Forum: Crystal Reports
Hello Chris,
Crystal Reports does not store the database password with the RPT file. This is by design (Crystal is not a database security product). This is true of all versions of Crystal Reports.
If your users need to see fresh data when opening the reports then they will have to log in by providing at least the password.
You can send reports with Saved Data that won't try to hit the database, but the data won't refresh either. To save data with the report go to the File menu and click next to Save Data with Report. Refresh the report and then save it. The report will now have saved data and won't try to hit the database when opened. If the user hits the refresh button then they will get prompted to log into the database.
I hope this helps.
EJ

Include a Test Frequency in Reports and Database

Similar Messages

Maybe you are looking for