Inconsistency with import workflow

Hello gentlemen and ladies, as well as Apple Community friends,
For past consecutive, straight days of trying to import AVCHD (.mts native files) from Canon VIXIA HF S21 HD CMOS camcorder, believe me, I have try all possible solution to import through connected camcorder to Final Cut Pro X.
As of last night, what I had discovered is stubborn spinning of waiting and waiting to import, nothing happens. It seems that it see Canon directory files, but nothing to import for minutes, hours. What's holding it back?
I have imported native directories from Canon camcorder within Mac Finder exactly what is stored on camcorder built-in flash card, and two flash cards. It kinda of can see the card reader or files on hard drive, but it still spins, and spins. What the heck is going on?
As of last night, I am amazed to discover that consumer-version, iMovie, can read and import no problem. I don't understand why pro app such as Final Cut Pro X cannot, while iMovie can.
It seems to me that I can import iMovie files into Final Cut Pro X. But the problem I have is duplication of files, and file explodes like crazy. And double time of waiting to import into iMovie, and then into Final Cut Pro X. It seems that iMovie convert mts file as QuickTime movie format (AIC). Not Apple ProRes.
As some of you know, I have no problem importing AVCHD files in Adobe Premiere Pro CS5.5. Why can't do the same with Final Cut Pro X? I just don't understand.
I really like Final Cut Pro X. But I don't see any truly seamless 'workflow'. I see no piece of an evidence of such smooth straight import files into Final Cut Pro X the way I want it to be - into Apple ProRes format.
My hands are up in the air and a little frustrated. I have posted for some help in the past few days. Some people has claimed that they have same kind of camcorder as I have and experienced no problem. I am trying to understand how? I just don't get it?
What a shame that Apple do not put suffice information in Final Cut Pro X Help.
I might go to Apple store here in greater Toronto area near my residence as there are a couple of Apple stores around near my residence. But I would prefer to resolve this through Apple Community discussion... as Apple store is always packed with tons of people browsing all over the place. Not only that, but communication challenge due to the fact I am Deaf.
Please give me a crystal clear steps for me to reproduce. Please be sure that you have the same camcorder as I have. Canon VIXIA HF S21, that is.
Thank you for all you help. Any help and assistance would be deeply appreciated.
Have an amazing, most beautiful day (it is gorgeous and pleasant) summer day here in Canada!
TIA, Brian

Hello Tom,
Just wanted to follow up and thought that I'd want to report back. I am glad to find a reasonable solution to deal with this stubborn, annoying import workflow problem. I am glad that I went to Apple retail store earlier today. Actually, the first guy at the Genius Bar at the store admitted that it was beyond his expert, but he has managed to get someone somewhere in the store on staff who happened to know a lot about Final Cut Pro X. Again, he also admitted that Final Cut Pro X issues are new to them.
They witnessed that my issue not able to get this camcorder not playing nicely with Final Cut Pro X. And it seems that Final Cut Pro X can see the SDHD cards inside camcorder. We believe that Final Cut Pro X app do not see or understand anything inside that built-in memory card inside the camcorder, which is a 64-GB flash memory fixed inside the camcorder.
I realize that most of my footages remain inside that built-in flash memory, and plan to transfer these clips from built-in memory into two SDHD flash cards. From now on, I would think I want to shoot clips and have it recorded straight to those two SDHD extreme pro.
What we have found that Final Cut Pro X finally imports media files from SDHD card. Although, I didn't bring my express card reader with me - forgot to bring it with me to Apple store earlier.
Therefore, I recommend that it is wise to connect camcorder to computer, then turn camcorder on. Once the cards shown on Desktop. Then open Final Cut Pro X. If connected camcorder to computer using USB connection, I don't highly recommend it - it is a pain and slow process. If you have quite few footages, go for it. But if you have large and/or many footages, go for express card reader or use FireWire connection if camcorder has this feature. Otherwise use express card reader, the better. Fastest one, the best.
And, I decided to sign up for One-to-One programme offered through Apple retail store so that I get both of my hands dirty under the hood of Final Cut Pro X along with Motion and Compressor. It would be easier for me, especially myself being Deaf, having difficulties in securing sign language interpreters for such workshop or training. It is hard to get talented interpreter to do technical interpreting especially with video editing or photo editing. So I decide to go for one-to-one, in-person basis with trainer from Apple retail store. Best of all, it is good for a year. Not bad for the good price, I guess.
Well, I am glad that I got this stubborn annoying issue resolved. So I can move this forward. I would expect that I probably will have some questions from time to time if needed to.
I told Apple team at Apple store earlier that Final Cut Pro X help material is really lousy and not well thought details. Lot of info left out. They told me it is still new and assured me that Apple corporate level will get this resolved. I hope so, sooner the better.
Enuf blah for now.
BTW, I am able to import footages (mts/avchd files) into Final Cut Pro X with no problem from card reader using express card reader... BAM, here it goes. Fast! I see that, by opening Quicktime info on one of those optimized file done by Final Cut Pro X, I like what I see... H.264 codec. And this is 1080i HD this time. I didn't see that before. Today is my first time seeing 1080i.
I have quick question.. what is difference between 1080i and 1080p? What is good thing about 1080i? The trainer guy at Apple store said it is really high quality - 1080i. Is this true? I want to hear both side of perspective, the better informed for myself and others who have similar question as I do.
Well, better stop for now...
Tom... and few others, thank you for your patience, and lots of efforts helping me out for past few days. I look forward to contribute myself to the Final Cut Pro X community. But first, I gotta to get both of my hands dirty under the hood of Final Cut Pro X... Play with it... Rough it up and see what it can do.
Thanks for all that you guys do!
Bonne nuit!
Brian

Similar Messages

  • Weird naming inconsistency with imported library

    I have managed my mp3's on the PC with iTunes for years and migrated them to my MBP. I never had iTunes manage the files as I also have other PC tools to play the files, so folder and naming stucture were important.
    Can anyone explain what 'rule' is used by iTunes to name the file/folder structure and where it gets the info from?
    I noticed inconsistencies:
    - artist name chosen for folder is not the same as in the IDtag but also not random
    - sometimes files are named according to track and sometimes the file isn't renamed at all (but track info is available in IDtag).
    I would like to understand the rules that are used by iTunes in naming and storing/finding info.
    Can anyone please help?

    i copied this from another thread ...
    http://discussions.apple.com/thread.jspa?messageID=5121267
    Here are two excellent resources for anyone who wants to use both Aperture and iPhoto or migrate from iPhoto to Aperture:
    Apple Video:
    http://seminars.apple.com/seminarsonline/aperture15iphoto/apple/index.html?s=50
    Interview with Aperture product manager Joe Schorr:
    http://downloads.oreilly.com/digitalmedia/2007/06/insideaperturepodcast-15.mp3
    I highly recommend both - you will learn a lot from each.
    In fact, the O'Reilly website has many good articles and podcasts:
    http://digitalmedia.oreilly.com/aperture/
    *+Does Aperture bring over the original and modified files, or only one or the other?+*
    from what i recall it brings in everything originals and edited versions, but keyword tags them as iPhoto Original and Edited or similar ...
    *+Also, Aperture doesn't update things in iPhoto correct, so if you move to Aperture you should basically delete your iPhoto library?*+
    correct, but with previews you can browse your aperture library in iPhoto if necessary ...
    *+One other annoyance, it seems weird the way it lists your iPhoto library separately in Aperture. Then as I commit to Aperture my new imports won't be in the iPhoto tab?+*
    not sure, when i first imported mine into aperture it create a separate project for each "roll" from iPhoto - each roll was an separate import session it seemed ...
    i had to manually move stuff around after i finally found the way i wanted to organize my library ...
    here is another great resource for aperture related articles:
    http://www.bagelturf.com/aparticles/index.html

  • Import Workflow from Site-Template to Visual Studio 2012

     
    Hi,
    I would like to import a SiteCollection Template into VS 2012 to create a sandboxed solution WSP Deployment Package.
    The Package should contain some document libraries, some content types and a reusable workflow running in one of the imported content types.
    So when I create the package and deploy it on a new sitecollection, all libraries and content types has been created.
    The only problem is that under "site setting"->Site Content Types"->"My ContentType"->"Workflow Settings" there is no workflow, like it was in the original sitecollection.
    When I then use Designer 2013 I see the old workflow. I can make a copy there and publish it again, then I can bind it to my content type.
    What do I have to import from the template / or change in my VS project to bind the workflow automaticly at deployment time.
    Thanks a lot
    Stephan

    Hi,
    According to your post, my understanding is that you had an issue about save site as template with the workflow.
    Did you do some customization for the wsp template in the VS?
    By default, when we save a site as a template, then the workflow attached with list or content type would be preserved.
    You can save a site as template, and use the template to create a new site directly to check whether the workflow preserved in the site.
    Thanks,
    Jason
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jason Guo
    TechNet Community Support

  • Problem with importing a large number of images to Lightroom?

    I'm trying to import a large number of images from disk to Lightroom. If I select more that approximately 1500 images (1250 works fine), I get an error message saying "files do not exist". If I reduce the number of files imported, everything works fine. I can import in groups as long as the number selected at any one time is less that the ~1500 limit.
    Has any one had a similar problems? I'm running LR 2.4 64-bit on Win7 RC 64-bit, Q6600 processor, 8 GB RAM.
    Does not seem like this should be a problem. Its a real hassle to my workflow. I'm working on a series of time-laps movies (here is a link to a sample: http://vimeo.com/6375019).

    Thanks for your reply Sean,
    It is an internal disk drive, SATA II interface.I have no other disk/file problems, this is unique to LR as far as I can tell.
    I'm loading files onto disk from a CF card reader outside of Lightroom, then opening LR and telling it to import from disk. I've never had a problem before with imports. Experimenting with number of files, somewhere between 1250 and 1500 is where the problem occurs.
    Been busy making time-lapse videos of the fire in LA, so I'm away from the computer most of the time.
    thanks,
    Dan Finnerty

  • Importing workflows from GRC 5.3 to GRC 10 and then changing them

    Hello Experts,
    We are migrating our SPM,RAR and CUP data from GRC 5.3 to GRC 10.1.At present in our CUP we have user access request workflow as 2 stage workflow.Now in GRC 10.1 we require a 1 stage workflow.
    I wanted an advise if it would be feasable to import the GRC 5.3 workflows and then make changes into it and remove 1 stage.
    Or create new workflows using BRF+.
    we are not sure as to what changes can be performed in the GRC 5.3 imported workflows in GRC 10.
    Please advise
    Regards,
    Apeksha

    Hello Steve,
    Migration you deploy Java component and extract data form 5.3 and import in 10.
    still lots of work to be done like and implementation as there are pre-requisite.
    second approach does not need to extract all data from 5.3 system(apart from Ruleset,if at all its required)
    I never migrate workflows better to create new one identical and faster i believe .
    Second approach is little time consuming but good from my point of view.
    In java stack people normally go with 2 system landscape .
    there has been client where in ABAP people go with 3 system landscape.
    now where tricky consulting part play and which data to be imported where.
    and few other points needed to be looked like when you use tools and import data.
    you actually import all transaction  data which contain all active and inactive
    expired.
    in you go with 2nd option you will have only valid data to start with.
    Regards,
    Prasant

  • Importing WorkFlows Problems

    I have tried to add workflows to the Automator Library by importing (a) workflows that come with the DevonThink Pro product and (b) a Postersize Photos workflow from Macworld (http://www.macworld.com/2005/12/features/dphelp1/index.php).
    Instead of appearing the Autmator Library under the relevant Application ( ie DevonThink or PDF), the imported workflows appear in the Library under "My Workflows".
    Why is this happening? Can I move them to the relevant application in the Automator Library?
    GJ
    Melbourne Australia

    Yes...I named the objects with capital letters e.g.
    JComboBox SexComboBox = new JComboBox();well, it would be a bit more readable to start object names with a lowercase letter
    (you might want to read about naming conventions one day: http://java.sun.com/docs/codeconv/html/CodeConventions.doc8.html)
    I added some comments to your code:
    SexComboBox.addActionListener(new
    java.awt.event.ActionListener() {
       /* This IS illegal syntax. The previous line starts a class definition.
           You should see at least one method declaration here:
            public void actionPerformed(ActionEvent e) {
            } // actionPerformed
          } // ActionListener
          I guess some lines have dropped out from your code here, because the
          following lines do not look like ActionListener code.
          You could try using the codelines above to fix your code
       SexComboBox.setEnabled(true);
       //Setup the sexComboBox item
       SexComboBox.addItem("Male");
       SexComboBox.addItem("Female");
       YearLabel.setText("Year");
       //setup the YearComboBox Item
       YearComboBox.addItem("1900");
       YearComboBox.addItem("1901");
       YearComboBox.addItem("1902");
       YearComboBox.addItem("1903");

  • Problems with importing text messages from PC Suit...

    Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
     I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
     Thanks for your help

    Most phones only allows importing of draft and archived box for SMS.
    To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
    If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
    What's the law of the jungle?

  • Tempo problems with imported wav files

    Hey everyone, sorry if there's a quick fix for this in the forums that I couldn't find, but I've been having some tempo problems with imported .wav files.
    Long story short, my system couldn't handle playing all the tracks for a song while recording drums, so I bounced out an mp3 of the song and put it in a new Logic file so my drummer could just play along to that as I recorded him. Unfortunately, the original song is at 167 bpm, but I forgot to change the bpm in the new Logic file with the .mp3 file of the song to 167 bpm, so it was left at the default 120 bpm.
    So, the drums were recorded at the correct 167 bpm, but Logic thinks that those new drum .wav files should be played at 120 bpm, so when I import my drum tracks back into the original file, they do not play correctly at all.
    I could get record it all again, but I wanted to check if there was a way I could salvage what I already have, since my drummer lives about an hour away right now and can't just come over whenever he wants.
    Thanks for the help! I really appreciate it.

    Hi,
    First, do not use MP3 in Logic, the sound quality is less than AIFF, WAV or CAF, and Logic has to decode it for playback, making it a heavier burden on the CPU than an uncoded audiofile, such as AIFF, WAV or CAF.
    Secondly, audio files are independent of Logic's tempo. If you bounce down an audio file in any format (other than Apple Loop), it will play back at the same speed, +regardless of Logics' tempo setting+, either at recording or playback. Logic doesn't 'think' anything. The BPM is only important to MIDI tracks, or to the spacing between audio files. The audio files themselves *are not affected* by the tempo setting. If you import an audio file of tempo 167 into a 120 BPM project, the file will still play at 167, only Logic will indicate the wrong bar positions.
    regards, Erik.

  • Problem with importing saved .json backup file in fresh installed firefox 3.6.8? Message "unable to process the backup file", when i choosed option "Restore" from menu "organize your bookmarks" !?

    Hello,
    my problem is with importing saved .json backup file in fresh installed firefox 3.6.8? Message "unable to process the backup file", when i choosed option "Restore" from menu "organize your bookmarks" !?
    Normally that i followed all instructions from your support site, and that i tried many things, but nothing helped :( !?
    my .json file isn't corrupted cause it was saved on another partition before formatting my OS.
    Please don't tell me that my bookmarks are lost :( cause i had many important things in that bookmarks, on 100.s pages :( ....
    Thanks in advance!
    Sincerely,
    hoho33

    "
    Can you restore that JSON backup in a new profile?
    Did you make sure that it is really a JSON backup and that there is no missing or hidden other file extension?
    A JSON backup starts with: {"title":"","id":1,"dateAdded"
    A HTML backup starts with: <!DOCTYPE NETSCAPE-Bookmark-file-1>
    You can try if you can restore that JSON backup in a new profile.
    Create a new profile as a test to check if your current profile is causing the problems
    See Basic Troubleshooting: Make a new profile
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    Please for administration of this support site, make possibility to quote someone's answer, on this way is dificult to answer somebody who wrote some suggestion!
    No, i can't restore JSON backup in new profile, even on fresh installed OS XP SP3, with fresh installation of latest version of firefox!
    MAN I TOLD YOU 10X IT'S 200 % JSON BACKUP FILE!!! I'M NOT IN IT FROM YESTERDAY, I WORK IN IT 12 YEARS!!!
    I tried restoring json backup in new profile, but nothing, i couldn't restore, cause that stupid error from screen shot which i posted again appears !
    Man i'm not totally noob i repeat 2nd time here, and normally that i know to create new profile, and that i tried that, but that didn't help!
    I can't believe that FIREFOX has not good support team, and doesn't care for yours users, this will not give me more reason to use in future firefox
    like borwser, if i don't have good support, and when i have problem like this, to loose all my very important bookmarks and passwords on them, and
    firefox support won't to help me to solve my problem!
    If somebody from firefox support team read this, i can give you Remote desktop access to my computer to try solve this problem, like other serious company
    like HP, Dell , etc. give remote desktop support to their users!
    Corel are you from firefox support team? Please don't write same suggestions, cause i know to read, and i understand well if you write once some suggestion!
    Greetzz

  • Performance with PowerShell Workflow intiation

    I have a workflow I want to initiate with a PowerShell script (all items in a given view), and it gets stuck on "Starting" for 3 minutes or more.  When I run the workflow manually it kicks off right away (and also completes within a second
    or two).  Since the workflow is getting initiated, why does it stay on "Starting" and complain of heavy workload?  How do I get a PowerShell initiation to match the performance of the manual initiation?
    Background:  We are running SharePoint 2013 and our site collection is in 2010 compatibility mode.  We have separate App and web front end servers.  I am running the powershell script on the WFE server.  The powershell
    script is very basic. 
    Test #1
    Manual Initiation:  Starts right away (within a second), and completes with Status "Completed"
    PowerShell Initiation:  Get Status "Starting" when PowerShell script is run with below message
    "Note: Due to heavy load, the latest workflow operation has been queued. It will attempt to resume at a later time."
    After 2-3 minutes, workflow completes with Status "Completed"  (so I know my simple script works)
    The above test was just with a workflow with a single step - "Stop the workflow and log 'workflow complete.'" 
    Test #2
    I tried doing a similar test with a workflow with a single user lookup and email action, and the workflow doesn't even run... you get Status "Canceled" with no errors after several minutes of the Status being "Starting" like in the test
    above
    Manual Initiation:  Starts right away (within a second), and completes with Status "Completed"
    PowerShell Initiation:  Get Status "Starting" when PowerShell script is run with below message
    "Note: Due to heavy load, the latest workflow operation has been queued. It will attempt to resume at a later time."
    After 2-6 minutes, workflow ends with Status "Canceled" and no errors

    Hi  ,
    According to your description, my understanding is that you cannot initiation Workflow using PowerShell.
    For troubleshooting your issue, firstly please add your site into Local intranet sites. Then you can try to  increase Throttle Size and Time Out. For more information, please have a look at the blog:
    http://sharepointwriting.blogspot.com/2014/01/sharepoint-workflow-due-to-heavy-load.html
    Also please provide detail error message of ULS log  to determine the exact cause of the error?
    For SharePoint 2013, by default, ULS log is at      
    C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
    contact [email protected]
    Eric Tao
    TechNet Community Support

  • Sharepoint 2010, InfoPath 2010 with Custom Workflow. Error Message: InfoPath cannot submit the form. An error occured while form was submitted...

    I have created an InfoPath form that submits to a Sharepoint library with custom workflow attached. The workflow is initiated when the user submits the form. An email is sent to the supervisor who clicks the "Encoded Absolute URL" and approved
    the form via the emailed form. Then, based on certain criteria the form is either emailed to the VP or the workflow is complete. The VP is sent an email and clicks the "Encoded Absolute URL" and sumbits the form via the emailed form. This is
    how I would like it to work. The reality is, the form submits and is emailed to the supervisor and the supervisor is able to approve but when the form is sumbitted I get an error. The error is "InfoPath cannot submit the form. An error occured while
    this form was being submitted. The form cannot be submitted to the following location: <URL> The file <URL> is checked out for editing by <me> The operation completed successfully." The operation did not complete successfully and it
    is not checked out. I have read in previous posts that the file is locked. Since I am in the testing faze of the project there is no one else using the form. I have waited 24 hours and the lock has not been released. Please help!!! My deadline is growing short.

    I ran into your post while having a similar issue.  I don't have a 'full' fix for you, but I noticed at least in our case if you made sure you opened the Infopath form through the browser instead of the client Infopath program (use the drop-down menu
    and open in browser) the error doesn't occur.  Hope that helps some....

  • After upgrading to Maverick mailboxes have disappeared. Even after checking library, rebuild etc. they are gone. With important data. Is there any hope?

    Maverick - lost all my mailboxes (Apple Mail) with important datat. Followed advice on help menu to reindex, rebuild; called Apple Chat. No help.
    Losing important data is a HUGE problem.
    Also, Maverick no longer has the many folders I once had in my Home scree. These folders included other important information
    carefully arranged. Are the files somewhere else? In what order? What a mess!

    I woke up this morning with the same problem (all was fine last night).  Only way to get all my mailbox folders back was to use Time Machine while in Mail, choosing the backup file from previous night and selecting EACH MAILBOX to restore (23 for me).  All appears okay so far today (except some of my accessories in the menu bar are gone). 
    I sure hope an update comes SOON.  In anticipation of Mavericks and the new MAIL I switched from Outlook 2011 3 weeks ago transfering 17,000+ files and would hate to back

  • Internal table with Import and Export

    Hi All,
    Hi all
    Please let me know the use of <b>Internal table with Import and Export parameters and SET/GET parameters</b>, on what type of cases we can use these? Plese give me the syntax with some examples.
    Please give me detailed analysis on the above.
    Regards,
    Prabhu

    Hi Prabhakar,
    There are three types of memories.
    1. ABAP MEMORY
    2. SAP MEMORY
    3. EXTERNAL MEMORY.
    1.we will use EXPORT/ IMPORT TO/ FROM MEMORY-ID when we want to transfer between ABAP memory
    2. we will use GET PARAMETER ID/ SET PARAMETER ID to transfer between SAP MEMORY
    3. we will use EXPORT/IMPORT TO/FROM SHARED BUFFER to transfer between external memory.
    ABAP MEMORY : we can say that two reports in the same session will be in ABAP MEMORY
    SAP MEMORY: TWO DIFFERENT SESSIONS WILL BE IN SAP MEMORY.
    for ex: IF WE CALL TWO DIFFERENT TRANSACTIONS SE38, SE11
    then they both are in SAP MEMORY.
    EXTERNAL MEMORY: TWO different logons will be in EXTERNAL MEMORY.
    <b>Syntax</b>
    To fill the input fields of a called transaction with data from the calling program, you can use the SPA/GPA technique. SPA/GPA parameters are values that the system stores in the global, user-specific SAP memory. SAP memory allows you to pass values between programs. A user can access the values stored in the SAP memory during one terminal session for all parallel sessions. Each SPA/GPA parameter is identified by a 20-character code. You can maintain them in the Repository Browser in the ABAP Workbench. The values in SPA/GPA parameters are user-specific.
    ABAP programs can access the parameters using the SET PARAMETER and GET PARAMETER statements.
    To fill one, use:
    SET PARAMETER ID <pid> FIELD <f>.
    This statement saves the contents of field <f> under the ID <pid> in the SAP memory. The code <pid> can be up to 20 characters long. If there was already a value stored under <pid>, this statement overwrites it. If the ID <pid> does not exist, double-click <pid> in the ABAP Editor to create a new parameter object.
    To read an SPA/GPA parameter, use:
    GET PARAMETER ID <pid> FIELD <f>.
    This statement fills the value stored under the ID <pid> into the variable <f>. If the system does not find a value for <pid> in the SAP memory, it sets SY-SUBRC to 4, otherwise to 0.
    To fill the initial screen of a program using SPA/GPA parameters, you normally only need the SET PARAMETER statement.
    The relevant fields must each be linked to an SPA/GPA parameter.
    On a selection screen, you link fields to parameters using the MEMORY ID addition in the PARAMETERS or SELECT-OPTIONS statement. If you specify an SPA/GPA parameter ID when you declare a parameter or selection option, the corresponding input field is linked to that input field.
    On a screen, you link fields to parameters in the Screen Painter. When you define the field attributes of an input field, you can enter the name of an SPA/GPA parameter in the Parameter ID field in the screen attributes. The SET parameter and GET parameter checkboxes allow you to specify whether the field should be filled from the corresponding SPA/GPA parameter in the PBO event, and whether the SPA/GPA parameter should be filled with the value from the screen in the PAI event.
    When an input field is linked to an SPA/GPA parameter, it is initialized with the current value of the parameter each time the screen is displayed. This is the reason why fields on screens in the R/3 System often already contain values when you call them more than once.
    When you call programs, you can use SPA/GPA parameters with no additional programming overhead if, for example, you need to fill obligatory fields on the initial screen of the called program. The system simply transfers the values from the parameters into the input fields of the called program.
    However, you can control the contents of the parameters from your program by using the SET PARAMETER statement before the actual program call. This technique is particularly useful if you want to skip the initial screen of the called program and that screen contains obligatory fields.
    Reading Data Objects from Memory
    To read data objects from ABAP memory into an ABAP program, use the following statement:
    Syntax
    IMPORT <f1> [TO <g 1>] <f 2> [TO <g 2>] ... FROM MEMORY ID <key>.
    This statement reads the data objects specified in the list from a cluster in memory. If you do not use the TO <g i > option, the data object <f i > in memory is assigned to the data object in the program with the same name. If you do use the option, the data object <f i > is read from memory into the field <g i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
    You do not have to read all of the objects stored under a particular name <key>. You can restrict the number of objects by specifying their names. If the memory does not contain any objects under the name <key>, SY-SUBRC is set to 4. If, on the other hand, there is a data cluster in memory with the name <key>, SY-SUBRC is always 0, regardless of whether it contained the data object <f i >. If the cluster does not contain the data object <f i >, the target field remains unchanged.
    Saving Data Objects in Memory
    To read data objects from an ABAP program into ABAP memory, use the following statement:
    Syntax
    EXPORT <f1> [FROM <g 1>] <f 2> [FROM <g 2>] ... TO MEMORY ID <key>.
    This statement stores the data objects specified in the list as a cluster in memory. If you do not use the option FROM <f i >, the data object <f i > is saved under its own name. If you use the FROM <g i > option, the data objet <g i > is saved under the name <f i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
    Check this link.
    http://www.sap-img.com/abap/difference-between-sap-and-abap-memory.htm
    Thanks,
    Susmitha.
    Reward points for helpful answers.

  • Problem with import file type setting

    Problem with import file type settings - In preferences>general I select "wav encoder" But then going to tools>Create it still says "create mp3 version".
    Can't find a way to overcome this. Thanks for any help.

    Doublechecking, roy. After making the preferences change, are you leaving the General tab by clicking the OK button down the bottom-right-hand corner of the tab?

  • Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

    Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

    haben
    From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
    A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
    Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
    User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
    presets there for the QuickTime choice there.
    What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30)  or something else? Do you know if this camera is recording with a variable or
    a constant frame rate?
    Please review and consider and then we will decide what next.
    Thank you.
    ATR

Maybe you are looking for