Incontext editing disappears after cntrl E and putting login in

unable to edit through incontext editing on a submitted website. It was accessible for about a week and now this week it doesn't. It asks for the adobe logon and the header and footer of the adobe incontext editing screen shows up and then it disappears and then switches back to original site, being unable to edit.
I am in desperate need for help. I have requested help 2 days ago through the help portion of incontext editing but have not heard anything back. Any ideas, any help at all? Thank you.

Hello ohwhyme,
Please post the URL for the site you're having problems with.
Also, what browser, version and OS are you using? Does editing work in a different browser?
Best regards,
Corey

Similar Messages

The green forward and back arrows under File and Edit disappeared after I downloaded the new Firefox Toolbar. How do get them back?

The green arrows for page forward or back at the top left under File and Edit disappeared after I downloaded the new Firefox toolbar (for 3.6) and were replaced by Most Visited, Getting Started and Latest headlines Icons, which I have little use for. How do I get the Original Toolbar back?

Is the Navigation Toolbar not being displayed? See below.
'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(~~red:Linux & OSX see~~: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M then release the key
''Windows'' Method 2. Tap the F10 key, while the Menu bar is visible, choose "View > Toolbars", click "Menu Bar" so that a check mark is placed next to Menu Bar
''Windows'' Method 3. Tap and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar so that a check mark is placed next to Menu Bar
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See:
http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
http://kb.mozillazine.org/Toolbar_customization#Restoring_missing_menu_or_other_toolbars
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''
'''[http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar How to customize the toolbar]'''

When I upload an app, it asks for my password, then says it's incorrect. When I reset it (after 3 tries) and put in the new one, it still says it is incorrect.

When I upload an app, it asks for my password, then says it's incorrect. When I reset it (after 3 tries) and put in the new one, it still says it is incorrect. What am I doing wrong?

I assume that you meant that you reset the password three times. Did you receive any verification that the new password was accepted?
Sign out of you account, restart the iPad and sign in again. Settings>Store>Apple ID - tap the ID and sign out.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in again.

Pictures disappeared after installing Yosemite and new Iphoto. Why

Pictures disappeared after installing Yosemite and new Iphoto. Why ?

I also started having problems with iPhoto after installing Yosemite. Some of the Event collections lost the picture and just has a grey square in its place. When I click on the Event, it shows a white dotted lined square for each picture and if I click on the picture, it shows an exclamation mark.
Check, if you also are having a folder "Old Masters" inside the iPhoto Library package, as described by Muhamad Abdulkadir.
Ctrl-click (or right-click) your iPhoto Library in the Pictures folder , then select "Show Package Contents". If you are seeing a folder "Old Masters", copy this folder out of the library. Look inside - are the original image files of the problematic photos inside?
Are any photos in your "Masters"folder?

How can I make my Introduction_mc automatically disappear after 10 Seconds and load Home_mc?

Hi,
How can I make my Introduction_mc automatically disappear after 10 Seconds and load Home_mc (automatically)? I don't want user to change by himself this Introduction page. It should be done automatically.
What is the procedure and code to achieve it, please?
Thanks.

Hi,
I gues you are using AS2.0, then use setInterval, in AS3.0 user Timer Class.
AS2.0
var interval:Number = setInterval(doThis,10000);//in milliseconds
function doThis():Void{
//do something;
AS3.0
var timer:Timer = new Timer(10000, 1);
timer.addEventListener(TimerEvent.TIMER_COMPLETE, onTimerCompleteHandler, false, 0, true )
function onTimerCompleteHandler(event:TimerEvent):void{
//do something;
For details: http://blogs.adobe.com/pdehaan/2006/07/using_the_timer_class_in_actio.html
Warm Regards
Deepanjan Das
http://deepanjandas.wordpress.com

InContext Editing disappearing

What could cause InContect editing to just shut down? I inserted it in many sites successfully. However, in this site I log in, and after a second or two InContext editing shuts down without error message. Most pages have a litte Flash file to play background music. I removed that on the "Venue" page to see if that is causing the trouble but it is not. Any ideas?
www.awbhst.orghttp://www.awbhst.org/index.php /index.php
Thanks,
Gudrun

I found the answer myself. I didn't know it was a Microsoft server which did not support php. Although the pages worked fine (I had only php extensions and no other code), InContext editing crashed. I changed the file extensions to htm and now it works.

ASM disk disappeared after the db and system bounce

Hi
I have a grid control 11g setup. after a db and system bounce, the asm disks disappreared from the /dev/oracleasm/disks.
The querydisks shows nothing
but the OS disks are existing and labelled as ASM disks.
# asmtool -I -l "/dev/oracleasm" -n /dev/mapper/VolGroup00-LogVol07 -a label
asmtool: Disk "/dev/mapper/VolGroup00-LogVol07" is marked an ASM disk with the label "REDO"
# asmtool -I -l "/dev/oracleasm" -n /dev/mapper/VolGroup00-LogVol08 -a label
asmtool: Disk "/dev/mapper/VolGroup00-LogVol08" is marked an ASM disk with the label "DATA"
dd if=/dev/mapper/VolGroup00-LogVol07 of=/tmp/vol7.dd bs=1M count=100
100+0 records in
100+0 records out
104857600 bytes (105 MB) copied, 0.467996 seconds, 224 MB/s
can anybody help how to retrieve that without hurting the configuration please?

Thanks for the reply
That was not the problem. I got solution. The problem was the way RHEL5 search the disks. I had to comment the content of 90-dm.rules and a system bounce.
thanks
krishna kumar pc
Edited by: user12244962 on Oct 18, 2011 9:27 AM

Correcting discrepancies after order confirmation and put away.

Hi, I was just wondering if there is a way to correct overages and shortages after a delivery has been received and put away. As we are very new to SAP, during a plant to plant inventory transfer, we made the mistake of confirming eight delivery orders in spite of the the fact that there were several discrepancies such as overages and shortages on several Item #'s. We have documented all the discrepancies and would now like to go into the system to make the adjustments. Is there a simple way to do this? Any help would be appreciated, thanks.

Hi,
One best way to adjust the overage and shortage of materials afterputaway is doing PHYSICAL INVENTORY.You can post the differences according to the overage and shortages of the material. I hope this will clear your issue. Thanking you.

After Syncing Content and Putting ATV on standby - No Content is there

I Synced all of my TV shows to ATV last night and put ATV on standby before going to bed. When waking up this morning and turning ATV on I noticed there were zero TV shows and ATV said that I needed to open my ITunes -- Once you sync content, isn't it saved on the ATV harddrive?
Please help. Thanks.

If you are syncing then yes the data should be on the hard-drive. If just streaming then need ATV open.
Also ensure what settings you have for TV syncing. If for example you have it set to 5 most recent unwatched shows but you had watched them in the past, then they won't sync and require iTunes open to list to stream.

IPhoto Library 'disappeared' after Yosemite crash and iPhoto upgrade

I have upgraded my iMac to Yosemite and have been using iPhoto fine since then (although it is a bit slow), yesterday iPhoto crashed the computer, after several restarts the computer was ok, but iPhoto wouldn't load and then said it needed to be upgraded - So I did this and when I opened this again it crashed then said that it needed to upgrade the library and then it crashed (iPhoto) when I restarted it started with no library and would appear to have overwritten the iPhoto (default) library, I have checked this and although there are other libraries, I am aware of these and these are not my missing library. I found some information on http://www.scanyourentirelife.com/all-my-pictures-in-iphoto-disappeared-how-to-s afely-get-them-back/ and this talks about looking in the 'Masters' file but to be very careful as altering this will cause problems with edits etc. Anyway I found that in my directory a file called 'Old Masters' as well as 'Masters' and it would appear that all of my pictures are now in 'Old Masters'.
So I am opening the right file but how do I make the 'Old Masters' the 'Masters' - is it as easy as shifting the files or changing the name on the file?
Tech Stuff - My iMac is running 10.10 Yosemite and is about 1 year old 27" version and I keep everything up to date (for my sins) - My library 700+ events and is about 176gb in size
Your help would be appreciated

Armelle,
there is unfortunately not yet any known way to repair an iPhoto Library, that got corrupted during the upgrade by a crash.
You can either restore your iPhoto library from the last backup you made before you tried to upgrade the library, and then try to upgrade again.
Or if your last backup cannot be restored or is too old, copy all photos you can find in the iPhoto Library package and import them into a new iPhoto Library.
but I can see my picture in "old Thumbnails".
The "Old Thumbnails" are only smaller sized versions of your photos. Don't you at least have "Old Originals" or "Old Modified"?
Léonie

4GLTE HomeFusion Service Disappears after 2 months and no support from Verizon

I am hoping this may gain some attention, or anyone else can share if this has happened to them
On July 5th, after 2 SOLID months of very good speeds and HomeFusion service with 3+ bars on the router, the service disappeared.
YES: The 4G Signal is GONE, only Verizon 3G. I am in the "4G Extended Area" (HomeFusion does not roll back to 3G)
Also notable, I have a Verizon 4G LTE Ipad and it too used to work on 4G and now only 3G
Now, I have been calling Verizon daily since July 5th, and get no answer, is this service GONE? Is it Broken, When will they fix it , will they fix it.
It has gone from "We will have our network people looking at the tower to, well, it's 4G extended service area and it could just go away, sorry"
Am I crazy, or is this a very poor way to service customers and run a business? If I had a service that they installed and approved on their network, shouldn't they maintain the service, or give notice that the service is going away? They are still billing me in advance for next month, 7 days of which I have been ale to use 0 GB of bandwidth.
I call tech support, ask to esculate, they tell me it is esculated, there is no one else to talk to. There is no answer or hope of knowing if the service is coming back or if/when they will do anything and decide to do anything except take my money. Oh, I expect a hassle when I tell them I am not paying for something I don't have.
So question: What should I do next, any suggestions on escalation? Seems Verizon could care less about it's 4G LTE network and customers that they put up on a service, they just don't seem to care.
Thanks!
Dave W

Lol that sux. Some people are so filthy rich or don't know any better and they just pay the bill

ActiveX container disappears after vi saved and recalled

I can create a container and insert an active x object.
The vi will run but if saved and recalled the control
disappears! No other indication of a problem.

This problem was related to the MS Forms 2.0 scrollbar. After talking to NI they recognized it as a known problem but it was not posted. The solution was to use the Microsoft Flat Scrollbar Control, version 6.0. This is fine except for the time spent looking around. It would have helped if it had been posted originally.

Contacts Disappearing after 3.0 and 3.01 update

After i updated to 3.0 my contacts were fine but after a couple of days i noticed a few contacts missing. Then the next day about 95% of them were gone from my contact list. They weren't completely erased because i can still see them in my "recents" file. I can also look up the same contacts through the new "spotlight" feature but they're simply not showing up in my contacts list. It seems okay until i need to compose an email or text and i cant because there are only about 6 names i can choose from in my contact list. I thought it may just come back after a hard reset but it didn't. I then decided to restore it. Luckily i was able to look up each contact through spotlight still so i painstakingly searched through each letter and transferred the ones that weren't in my address book on my macbook. I then restored it and everything seemed fine up until today. Now i noticed the same thing is starting over again. A few contacts are missing and i can look them up through spotlight but they are no in my contact list. Is anyone having this specific problem or have any advice how to correct it? Or did you just call Apple Support? This is just lame. This is probably the most basic of functions for a PHONE period if it can't keeps my contacts in line really what good is it?

i used to have a MobileMe acct a long time ago. I cancelled it beginning of last year. The last time i restored my phone i then synced it with my contacts on my address book on my Mac. As far as i know they are all available to sync. The thing i even try save a new contact after a friend called me but it still is doing the same thing it will not show up in the contact list but it will in spotlight. hmmm...

In Designer, old application system disappears after New version and ORA-01562

In Designer 2.1.2, after starting (RON 2.0.24.1.1) Application / New version,
error ORA-01562 occurred (because I have a smaller rollback segment on line).
Now I can't find in repository
old version (1) of my application system,
but new version (2) exists in repository.
Unchecking the 'Show Current Versions Only' check box doesn't help.
Even Designer API statement:
'SELECT id, name, version
FROM ci_application_systems'
displays only new version (2).
Means this that Designer:
- first changes old version number to new version number and commits
- and then copies new version to old?
How to return old version number (without Designer API)?
Thanks and regards
null

Answer from Oracle
(MetaLink Technical Forums):
'When Designer versions it takes a snapshot of the first version
and then changes the originals version number to 2.
If designer run out of rollback segments while creating a new version
it will not show the old version again.
This is a bug (818860). It is in the resolution stage.'
null

TS1424 Rental movies disappeared after iPad crushed and restored.

I was trying to remove iPad from my where id my iPhone app and all of a sudden iPad got wiped.
Restored it through itunes but rentals disappeared despite accounts keep telling me that I have unwatched rentals.
Where on earth are they!

From the iPad User Guide (click to expand):

Incontext editing disappears after cntrl E and putting login in

Similar Messages

Maybe you are looking for