Increasing condition groups for a customer

Hi all,
There is a business requirement wherein a customer needs to be associated with more than 5 condition groups configurable in customer master data under extra (additional data) settings.  Since SAP has a limitation of  only 5 condition groups, I am not sure how can this requirement be met without undertaking a Z enhancement. Is there any other way/method in SAP by which this objective can be achieved?
Would be greatful if anyone could share their experience on the same.
Thanks
Aashish

hi,
that means there are only 5 customer groups in standard SAP.
if you want to increase you can do it technically only by capturing the program name.
SAPLV02Z, screen number 0200.
i think you have to for screen modification.
other than this there is no any alternative.
balajia

Similar Messages

  • DIFF SALES GROUP FOR ONE CUSTOMER

    Hi All,
    i want to know in CMR v can maintain only one sales group for one customer then how can v possibly maintain 3types of sales group for one customer, for its condition records to be differentiated for pricing.
    Thanx for reading

    hello again.
    actually, you can.
    let's say you have 3 sales areas...(sales org + dist chnl + div)
    1000 + 01 + 01
    1000 + 02 + 01
    1000 + 03 + 01
    you use VD01 or XD01 to create CMR for customer nr A1001, in sales area 1000 + 01 + 01.  you use the same t-codes to extend the customer A1001 in 1000 + 02 + 01 and 1000 + 03 + 01.  so 3 CMRs using only 1 customer nr.
    let's say further you have 3 sales groups (which you assign to sales office and sales area).  these are:
    A01
    B01
    C01
    you can then have the possible arrangement below:
    1000 + 01 + 01  =  A01
    1000 + 02 + 01  =  B01
    1000 + 03 + 01  =  C01
    regards.

  • How to create a authority group for our customer table(se54)?

    Hi,everyone:
          I found a problem when I create a authority group for my customer table,I can't write the creation
    to a request no(can't assign to a package),I want to know whether the authority group I created can be
    transport to the PRD when I realse the request no.
    Thanks!!!

    Auth Group is nothing but a table entry so for sure it can be transported to any environment, before Assigning any Auth group create one in SE54 when you try saving it it would ask you the TR number which you can transport to PROD.

  • Re : How to find the Account Group for a Customer

    hi
    i know the Sale Area ( Sales Org,Dist Channel & Division), Company code but when i go to XD01 TO create a Customer it is asking for a Account Group.My Question is how to find the Account Group
    & is there any link between Sales Area and the Account Group?
    Regards

    Hi murali,
          Account group makes the fields in the customer master data as
          1. suppress
          2.req. entry
          3. opt. entry
          4.display
          the above 4 are the radio buttons available.
        Before u create the customer master in XD01.
        you must gothrough the following paths to create xd01
        Img->Fin.Accouting->AccountRec & Account Payable->Master data ->prepare for creating customer master data
                          In the above path
                               I. define account groups
                              In this you cretae your own account group
                                II. create number ranges for customer accounts
                                In this maintain any number range
                               III.Assign number ranges to customer account group
                                in this Assign  the number range here.
    Now go for XD01
    select the account group you created.
    Give the customer number,this number must be in the range  that u made in the above II point.

  • How to find a/c group for a customer

    hi evdrybody,
    how to find a/c group of a customer in va02
    i tried in extras a/c group ifo but there i am getting all a/c group data. but i need only a a/c group which created with this customer
    thanks
    kranthi

    Dear Kranthi
    Go to XD03, give the customer code and enter.  Now select "Extras - Administrative Data".
    Thanks
    G. Lakshmipathi

  • Error while changing Account Group for Prospective Customer

    Dear All,
    I am getting an error when the account group of a prospective customer needs to be changed to Sold to Party
    The planned change is not allowed as the following groups would be masked by the new account group,
    S      Group                    Group Name             M                 Group Name
    V       D315                    Shipping                   030              Rail Specifications.
    Please let me know what is the reason for this error and as per my knowledge even if the no range is different for both these partner functions the system should allow me to change the account group however the earlier no given to prospective customer will still exist even if the prospective customer number is changed to sold to party please let me know otherwise.
    Kind Regards
    Atul

    Hi,
    Go to KOH2
    Select the order by pressing F9. Now place the cursor where you want to put the order group. i.e on same level or Lower level.
    Regards,
    Jigar

  • Account group for STO Customer

    Hi,Frendz,
      What are all the pre requisites for creating a STO Account group.I mean is it normal or any extra setting are required?
    Bcz I want to create STO Customer.
    Thanx&Regards,
    RamU

    Hi,
    This is like any other account group, but u do not assign number ranges to it bez we r generally taking eexternal number based on the recieving plant code.
    Regards,
    Ravi Duggirala

  • Account group for a customer

    Hello,
    HOw to find what account group is assigned to a customer? Thank you.

    Hi,
    You can find it in table KNA1 and field KTOKD.
    Hope this Helps.
    Radha.

  • Account group for Customer

    Hi is there any Transcation to find Account group for particular Customer. Other than XD07 as we dont have authorization for XD07 in production.
    Regards
    Nagesh

    Hi,
    in XD03, enter customer number, view the customer and go to "Extras / administrative data", there you can see the account group.
    Best regards, Christian

  • How to maintain price condition record for the following senario

    Hi Gurus,
    I have a scenario where storage charges can apply either per cbm or per sq.mt or  per day.
    for a single customer.
    Another situation --- Handling in Palletized charges per cbm or per pallet for a single customer
    can somebody help me on this.
    Thanks,
    RR

    Hi,
    Scenario 1:
    Go to VK11 tcode and Enter your KAD1 COndition Type.
    Now maintain the Condition Record for your Customer.
    Scenario 2:
    Go to VK11 tcode and Enter your KP00 COndition Type.
    Now maintain the Condition Record for your Customer.
    Note for Scnario 2: Please make sure for KP00, the field Plus/minus in Condition Type setting should be "A"  i.e the Surcharge. It is because the same condition Type can be used for Discount as well as for Surcharge.
    The condition Type setting for KP00 can be done by going to V/06 tcode
    Regards

  • Frieght charges include for particular customer and also include in invoice

    Hi,
    How to include frieght charges for the particular customers towards freight charges recovered from them. Credit into Freight Charges received (GL account No: 310010 ).
    Frieght amount should shown in invoice also.
    How to do that above issue.
    Please help me to resove this issue.
    Thanks,
    Suresh

    Hi,
    maintain condition type kf00 for fright in your pricing procedure as a manual condition and maintain condition record for combition customer in vk11 or give in sales order manually.
    g/l account part u need to maintain separate g/l account for fright in vkoa transaction.
    Best regards
    Srinivasyadav

  • Please provide Solution for Customer Condition Group when defining 2 Chrt's

    Dear Guru's,
    Please provide Solution for Customer Condition Group when defining 2 Charecters or 2 digits.
    I have Completed all possible Combinations like AA,BA,1A,A1,01 to 99 etc.. Total Enteries reach upto 1200+ so I am unble to find no more Combinations( without Special Characters & no chance to increase other than 2 Char/digt)..
    Any body Suggest me any Good Combinations or Proper Alternative....
    Thanks,
    Panduranga

    Hi panduranga
    A Customer Condition Group is maintained in only 2 digits .If you want to go for more than 2 digits then you need to take the help of ABAP'er and you need to go for enhancement
    Regards
    Srinath

  • What are the license conditions for the customer ?

    What is the license agreement for the customer to use Beehiveonline ? Is it similar as the OUM Customer model copied below? thanks Francis
    OUM Customer Program: The OUM Customer Program allows customers to obtain copies of the method for their internal use by contracting with Oracle for a services engagement of two weeks or longer. Customers who have a signed contract with Oracle and meet the engagement qualification criteria as published on Customer tab of the OUM Website, are permitted to download the current release of OUM for their perpetual use. They may obtain subsequent releases published during a renewable, three-year access period.

    Hi,
    We do not have a license requirement for BeehiveOnline as this is a service provided by oracle for Oracle customers, partners etc. to allow them to work more efficiently with Oracle. It is not a system that the customer can control as the groups are maintained by the Oracle,contact.
    We rely on the normal terms and conditions that all users sign up to when they create an oracle.com website account.
    So in short - it is a free-to-use service licensed under the same agreement as the normal oracle.com websites acount.
    Phil

  • How to Avoid Grouping for some conditions?

    Hi,
    I am facing a problem in Sales_commission Report. In this report I am grouping data Based upon first by
    salesman and then by customer. And also some sorting conditions. I designed all grouping by using report wizard.
    The problem is: If sort_by Parameter =customer then only need to group data based customer.
    Else ie if sort_by= 'order_no' or 'Inv_no' then no need of grouping the data by customer. Display data
    as per sorting condition.
    Is there any solution for this problem?

    Hi,
    I am facing a problem in Sales_commission Report. In this report I am grouping data Based upon first by
    salesman and then by customer. And also some sorting conditions. I designed all grouping by using report wizard.
    The problem is: If sort_by Parameter =customer then only need to group data based customer.
    Else ie if sort_by= 'order_no' or 'Inv_no' then no need of grouping the data by customer. Display data
    as per sorting condition.
    Is there any solution for this problem?There is no way to remove the grouping based on customer, so sorting based on customer will be retained.
    Way to hide the customer group fields in the customer repeating frame is by using format triggers based on sort_by_parameter,
    and place the customer fields in the last group repeating frame also and show or hide this fields depending on sort_by_parameter.
    Hope this helps.
    Best Regards
    Arif Khadas

  • Using If condition in For EACH Group

    Hi all,
    I want to use if condition in for-each-group. Basically my requirement is that i want to use dynamic grouping. There will be two groups and the upper group and lower group will be selected on the basis of a report parameter.
    I hope i made it clear enough. So please help me in this. Any ideas will be highly appreciable.
    Thanks and regards
    Naveed

    You can add a If condition filed after the for-each field
    for EG : <?if:ADDRESS_TYPE = 'Employee Address'?>
    and then add anothet field which has <?end if?>
    Hope this helps.
    Thanks,

Maybe you are looking for