InDesign CS3 Print Presets

Have a print preset that creates a PDF w/thumbnails, used successfully in CS2, which put the PDF file on the desktop. Loaded all our print presets into CS3, looks like file was created, but cannot for the life of me figure out where the file went! Looked everywhere in Finder ... any ideas?
(Would love to export to PDF w/thumbnails, but I don't see a way to do that?)

No, that setting only puts the thumbnails in the side bar.
I'd love to see your script that included them as an extra page. Can you share? Oh, wait, I think I misunderstood, You mean you want to print what amounts to a contact sheet of PDF pages.
Your script may have some code that is CS2 specific (thought I'd expect it throw an error) which could be corrected by one of the folks who write scripts.
Another possibility is doing it out of bridge, but I don't know what that would take, either.

Similar Messages

  • Distribution of InDesign CS3 Print Presets

    Is there a way to "mass" distribute InDesign Print Presets for InDesign CS3?
    Have a large list of Print Presets saved on a server. Would like to "push" them out to over 20 production Macs with CS3, using something like Apple Remote Desktop. Each Print Preset that exists on the server are also on one specific Mac. Each has a unique name. But can NOT find these names when doing a search on the Mac. Where are they actually being stored?

    The CS3 print presets are stored in the ID Preferences (~/Library/Preferences/Adobe InDesign/ Version 5.0/InDesign Defaults).
    Here is a link to an InDesign Secrets article which talks about how to export the presets to a .prst file:
    This article covers CS and CS2, but I'm guessing it's the same for CS3.

  • InDesign CS3 Print Booklet function

    I have an issue with InDesign CS3 Print Booklet Function.
    Certainly Print Booklet is not InBooklet by any stretch. It does however have to be an integral part of the InDesign Program(one of the reasons it is better than QuarkXPress).
    Print Booklet takes the age old practice of creating 4 page signatures for booklets of 4-page multiples and when you get to 12-16 pages it mysteriously inserts blank pages making non-4 page multiple booklets. I have had 12 page booklets made into 14 and 16 page booklets into 18 pages.
    Is there a fix for this issue forthcoming from Adobe, or has anyone discovered a workaround?
    I do not want to teach students that they have to go to PDF's and use another way to impose, when it is an important part of InDesign.
    Jack Mertes

    >I click Printer Settings to make sure I've got spreads selected and crop marks etc.
    Make sure you DON'T have the "print spreads" box checked when setting up to use Print Booklet.
    >make booklet makes low res pages in an InDesign file and Booklet CE 3.5 makes a new InDesign file up of individual PDFs but the pages are all out of order.
    I'm not sure what you mean by "make booklet makes low res pages." Are you referring to Dave's MakeBooklet.jsx script? That simply places the pages from an existing InDesign file into a new file in Printer spread order. It's up to you what sort of resolution any page element has in the original file, or what PDF settings you use to make a PDF from the new file. Perhaps you need to adjust your View > Display Quality setting?
    The pages in an imposed file SHOULD be "all out of order." You are looking at printer's spreads, not reader's spreads. Are they not in the correct order for printing?
    Peter

  • Placed QuarkXpress 7 eps into InDesign CS3 prints with slanted type

    any suggestions to fix?

    placed QuarkXpress 7 eps into InDesign CS3 prints with slanted type
    The problem may be in the HP print drivers.
    Printing to Epson printers works, printing to HP 132, 5000 or 2200 produces slanted type, even at Adobe.
    Printing to disk as a Postscript printer and then printing the ps file using the pdf printer works fine.
    Roger

  • Save InD CS3 Print Presets

    I am running CS3 Premium under Win XPro. I have just received my upgrade to CS4. Do I need to do anything special to save my print presets in InDesign CS3 for use with CS4 before I install?

    Homeboy,
    You specifically asked if you needed anything special to do this. (I read do but my mind processed if you needed anything) I informed you first that you did not. Next, I described the process with the tools you already had. (InDesign)
    To top it off, Peter comes and steals my thunder. I'm reporting Peter's post as abuse.
    BTW, all of this typed with a .
    I'm glad Peter's post navigated you through my befuddled mind.
    Buko… so… we meet again.

  • InDesign CS3 PDF Presets disappeared

    One of my Macs that has been working fine for a while has suddenly lost it's PDF Presets. I should maybe say misplaced, as they are available in the File>Adobe PDF Presets drop-down menu, but not via the Print dialog.
    Dual 2.3 G5, OS X 10.4.11, InDesign 5.0.4, Acrobat 7 instead of 8 due to Quark, Quark 6.52

    I ran through the usual suspects; repair disk permissions, update OS and CS3. No luck. I stubmled upon the link below, again, and manually set permissions for the Application Support folder. It works again (for all accounts).
    http://kb2.adobe.com/cps/328/328886.html

  • How to save CS3 print presets?

    Greetings,
    Here is my issue: When I go to the print dialog and choose save preset, I make the changes ( I want a tabloid preset that selects tray 4 from our Splash server/Docucolor 12 setup) but when I select the "Printer" button and choose "Paper Feed" and switch it from Auto select to Tray 4, it won't retain my Tray 4 setting. It remembers everything else. This causes the print job to go to the error queue with the error "no 11x17 paper trays installed" - when there are and paper is in there.
    I want to be able to share this preset with the other designers in the office.
    Mac OS 10.4.11/Adobe CS3 Design Standard
    Any thoughts?

    Are the optional trays listed in the printer setup for your printer? Maybe they need to be activated.

  • InDesign CS3 Printing Issue

    I recently installed the CS3 Suite including InDesign, Flash, Dreamweaver, Photoshop, Illustrator, Acrobat, et al. I am not able to print anything from any of my CS3 apps. CS2 continues to perform just fine, and I've been forced to save down CS3 docs to CS2 just so I can print. Any suggestions on remedies? Again, this is across the board CS3 apps, not just InDesign. I'm running a Mac G5 using Airport Extreme as my wireless router.
    Thanks in advance -

    Hi Barry -
    When I use Command-P, I get the usual dialogue boxes in InDesign but the print utility doesn't show in my dock as it normally does in CS2. When I installed my latest OS, I manually configured the printers including selecting each PPD. I have not re-installed the drivers, however. I'm using Leopard - 10.5x. I have installed all available updates from Mac and Adobe. I have two printers, Epson for my finer jobs and Brother for everyday tasks. Both printers work fine out of CS2. I alternate them by plugging/unplugging each from the back of my Airport Extreme as I need them. My computer tower is in a cabinet under my desk and it's a bear to pull it and all peripheral wires out so I haven't tried a direct connect.
    Thanks -
    Don

  • Indesign CS3 printing alignment issues with Konica Bizhub

    Hi,
    I am designing documents in ID CS3 to print inhouse on our Konica Minolta BizHub 350 through a Fiery. I will set up a document with at least .375 inch border all the way around. I'll print it, sometimes the documents are duplex, and it's all good. A month later I will go to print this document again, same print set up options and everything is shifting to one side, sometimes as much as .5 inch. Our printer technicians have been out here and found that we did not have the appropriate Fiery driver. So we downloaded and installed that and everything seemed to be fine until today, I go to print a document that had previously been set up and everything is shifting to the side. I went in and selected the paper size rather than let it be defined by driver and it helped a little but it's still off. Same thing happens on business cards. I'll set up the business card template in InDesign, futz with it to make sure it's printing within the card size (I can't tell you how many sheets of business card paper I've had to toss trying to work this out) and works great. Next time I go to print the cards, everything is shifted up by a quarter of an inch.
    This makes no sense to me. Am I doing something wrong in InDesign? Has anyone else had this problem? I just can't spend hours realigning every document that I've already created every time I have to print them. Please help.
    Mina

    You may see about getting upgraded to the Creo print management software for the BizHub over the Fiery. Despite it having its quirks it does pretty well.
    We have had great luck with our BizHub though it only runs 6 hours per day. Only have to have service for PM kits. I don't know about those who require so much more service on theirs, perhaps they aren't built for 24/7 continuous operation. Ours certainly has no trouble being ran through the little one shift routine we put it through. Again, we don't really push the thing, just a hair under a quarter million impressions a year with a variety of odd stocks. For a specialty machine that does our short runs and one offs it is a really nice machine, though not something I'd just hit "print 1000" without reviewing an initial proof.
    If you need to have it serviced that frequently and are getting inconsistent results that you speak of I think you are running the machine incorrectly. The gentleman that runs our was previously running a hand crank letter press for the last twenty years. It and a couple black and white production printers are his only exposure to computers at all. You should have someone educate you on how to properly run the machine if you are continually running into these problems, or get a $300 PC and a copy of Adobe Reader to do the printing for you like we do.

  • InDesign CS3 Print PDF (page printed shifted 0.125 downward)

    Hi,
    I'm currently using CS3. Everytime I print the booklet/catalog to pdf file, the whole document seems to be shifted down .125in in the printed pdf file. The files looks fine when I view in preview mode in InDesign, it only does it when I print pdf. Does anyone have solutions to the problem?
    Heidi

    Looking at the print dialogs, it appears to me that the problem is you are trying to print bleeds on the same size sheet as the document page.
    What you are seeing in the preview is the result of selecting "upper left" positioning and including the bleed, which is pushing the page image down and to the right by the amount of the bleed. You need to print bleeds on oversize stock and trim. To do that accurately you'll want to include trim marks, too. If printing two sides it's also essential to set the positioning to centered (and don't even try this on an inkjet printer with uneven non-printing margins). Don't expect miracles from digital printers for side-to-side position registration on two sided prints. They just aren't that accurate.
    I'm not familiar with your Sharp printer, but my guess is that if you have a border on the right side of the print it's because of the non-imaging area on the page (only a few printers are capable of printing all the way to the edge, and, as far as I know, they scale the image to do so, and would not be a good way to print books with bleeds).
    That doesn't answer the question of why you'd have a white edge printing to PDF. The answer to that seems to be in the Acrobat display settings. In Acrobat, Edit > Preferences > Page Display and uncheck the box for "Use 2D Graphics Acceleration" and I think the white line will disappear.
    Peter

  • Adobe InDesign CS3 Printing Glitch

    Not sure if this is an issue with the printer drivers or InDesign, but anytime I try and print from InDesign with a document that has a rotated image it will glitch and half of the rotated image will be rotated even further.
    Any thought or Idea's or hopefully a solution?
    Thanks.

    is there a consistancy to the failing file format? is this always .eps links or would an rotated ID frame fail.
    Have you checked for a most up to date driver for the printer, and what printer type; does this happen if exported to pdf?

  • InDesign CS3 + Printing Problem

    I have a very simple problem, but am not sure how to solve it. If I ever print more than one copy than anything, InDesign flattens the document that many times before it prints. If I want 100 copies, I must wait for InDesign to flatten and process my brochure 100 times, and THEN it will print. I know there must be something I'm overlooking. Any advice?

    You could try creating a PDF and printing that. Might be a bit faster
    especially if you flatten the PDF.
    Bob

  • Help Please.  InDesign CS3 Print Booklet to PDF

    I'm desperate for any help on this issue.  I have a Macbook Pro running Leopard OS X.  I currently have Adobe Acrobat 8.0 installed.  I'm trying to print a booklet from an InDesign file to a PDF.  Whenever I run through the prompts to Print to a PDF, the sequence starts and then a PDF never shows up.
    If anyone can help me figure out why this feature is not working, I would be so grateful.  I'm getting ready to pull my hair out!

    I'm afraid I'm not really going to be all that much help.
    The PDF printer is killed by Snow Leopard, but that shouldn't be a problem for you, so it sounds like something else is going on. I'm going to defer to some of the Mac experts here on possible ways to reinstall the PDF printer or other possible fixes.

  • InDesign CS3 Print Engine Error and Corrupt Print Dialog Box

    We are a networked office working on various files off of a server. After setting print settings in the print dialog box and saving the file, when another user (or the same user) reopens the file, the Print dialog box settings are changed in a bizarre, corrupted way, and the file will not print. We get the following error:
    Printing Error: The Adobe Print Engine has failed to output your data due to an unknown problem.
    and printing fails to the HP LaserJet 4240 PS (64 MB RAM).
    We all use Windows XP, SP2, Dualcore 3 GHz Pentium Processors with 3.5 GB of RAM.
    Specifically, the Print dialog box shows these strange settings:
    Scaling gets set to 0%, copies are set to 0
    Spreads are turned on
    Print Visible Guides and Baseline Grids are turned on
    All printers marks are turned on, offset is set to 0
    Use document bleed settings is turned on, include slug area is selected
    Output Text as Black is turned on
    Omit for OPI has all 3 file formats selected (EPS, PDF, and Bitmap)
    Usually resetting the Print dialog box and saving the file allows us to print but then the next time we open the file, the Print settings are corrupted again.
    Any solutions? Or any fixes in the works?
    Thanks for your help!

    We currently only notice this problem with files associated with one project. The project is a book of many chapters, each with it's own file. The problem affects multiple files and multiple users (4 out of 5 people working on these files have experienced the problem). It may very well be a problem caused by a different user opening the files after another has closed them.
    We have a LAN with multiple Dell servers running Windows 2003 and many end-user PCs using Windows XP. All printers are on the network but printing occurs locally, meaning that data sent to a printer does not go through a server.
    We could test the problem by copying a chapter to one person's computer and making them the only person who works on it for a day or two. It's just hard to do so because different people have different duties to perform on all files.
    Thanks for your help!

  • Problem with Indesign CS3 print booklet option

    HI I am trying to print a document as a booklet but under the file menu there is no "print booklet" option. Please help, I have look online for hours to find out the answer with no avail. Thanks Monika

    Hi Monika,
    If you'd like to test drive Quite Imposing Plus here is a temporary number and private code.
    Go to our site www.quite.com and download the current version.
    Quite Imposing Plus
      Expires end 8/2010  Serial 4268-8143-8389-7025  Code 6099
    Once loaded Please look at Getting Started tech sheet. Go to our Imposition Control Panel and click on the ? button.....then click the Getting Started button. Also, lots of good information on signature setups Step-by-step Instructions and New features. Also, check out Tips and Tricks to see how to create other signature setups (e.g. Step and repeat, cut stacks, double cut stacks, add color bars, etc.)
    Happy testing...
    cheers,
    Charles
    Charles James
    Technical/Marketing Director
    Quite Software
    USA
    858.581.9143
    [email protected]
    [email protected]
    www.quite.com

Maybe you are looking for