INDEX count not be created

Hi
I could not create index on a table. It shows like this
Msg 208, Level 16, State 1, Procedure dba_trigger_log_db_events, Line 58
Invalid object name 'master.dbo.DBA_DB_DDL_Trigger_Event_Information'.
What might be the error . Please help me to solve and create the index
I am using sql server 2012 sp1 developer edition
Thanks & Regards Manoj

Hi
The table does not in master database and more over i dont want to create any table or funtion in database i just create an index in the table but it show this error.i cannot find why it shows. please help me to solve
Thanks & Regards Manoj
Can you post the text of 'master.sp_helptext DBA_DB_DDL_Trigger_Event_Information'
it seems some SP or table that trigger on 'ALTER TABLE' to prevent or track it. not sure until you post the text or exists of DBA_DB_DDL_Trigger_Event_Information
http://technet.microsoft.com/en-in/library/ms186406%28v=sql.105%29.aspx
in case if that DBA_DB_DDL_Trigger_Event_Information is not there, can you check whether this is called with in any other SP, like in a DDL trigger when you alter the table,
can you quickly check in
select OBJECT_NAME(object_id),* From sys.sql_modules where definition like '%DBA_DB_DDL_Trigger_Event_Information%'
Thanks
Saravana Kumar C

Similar Messages

PARCONV phase Index could not be created ERROR

Upgrading Solution Manger 3.2 to 7.0 Windows Nt SQL Server 2000
We are in teh PARCONV phase now and getting errors regarding tables with missing indexes.
Example from PARCONV.ELG file:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CONVERSION ERRORS and RETURN CODE in NCONV00.TS3
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EEGT236 The SQL statement was not executed
2EEDI006 Index " " could not be created completely in the database
Long text:
 Cause
 It was not possible to create the index in the database.
 This could be caused by the fact that an index with the same name
 exists in the database, but it is unknown to the ABAP/4 Dictionary.
 Activating the index in the ABAP/4 Dictionary is possible, but it is
 not possible to create it in the database.
 System Response
 What to do
 For more information about the cause of the error, analyze the SQL
 error messages in this log.
2EEGT221 Creation of secondary indexes for table "BBP_PDHGP" failed
Long text:
 Cause
 There might be a SQL error.
 System Response
 What to do
 Check the SQL codes for errors.
2EEGT239 Error in step "BBP_PDHGP-STEP6"
2EEGT094 Conversion could not be restarted
Long text:
 Cause
 The conversion could not be restarted, i.e. it was not possible to
 continue the conversion at the point where it was interrupted.
 System Response
 What to do
 Information about the cause of the error can be found in the restart
 log.
2EEGT236 The SQL statement was not executed
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I have gone into se14 the index name exists but the index doesn't exist on the database. I've tried using the Create to create teh index on the databse but that fails with a name may already exist.
How to I clear these errors?
Thanks
Laurie McGinley

It appears on all the ABAP Dictionary: Restart Log List, that the same error is occuring on creating the secondary indexes...
Database error 170 at EXE
Line 1: incorrect syntax near '('
Same error occurs if I use the SE14 to "Continue Adjustment".
Note 1180553 u2013 Syntax error 170 during index creation on SQL 2000 and
Note 1346662 u2013 Avoid index creation errors in 7.0 EHP and higher upgrades.
Note 1365755 - Scripts to fix fillfactor issues on SQLServer 2000
These seem to be the key.... but...
I ran the scripts in 1180553 ... no change in the errors. In fact, there isn't a dbo.[TATAF~] table and the dbo.[TATAF] table doesn't have the 'With fillfactor" entry. So i wonder if I'm at a different phase?
I'm looking at 1365755 and think I'd like to give that one a try, but it says to unpack the ZIP file in the <upgr dir>\abap\bin directory. Well there isn't one. I have the upgrade dir \usr\sap\put and its subdirectories, but no \abap\bin dir.
So I'm not sure where to unpack this to give it a try.
Perhaps it would be better to go back to teh beginning of the UPGRADE (after PREPARE) and start again?
I didn't upgrade to SQL Server 2005 because the version of SolMan we are on isn't certified on it, so thought I'd get through the Sol Man upgrade then do SQLServer 2005... maybe need to rethink this to?
I'm open you suggesions, ideas, answers!
Thanks
Laurie McGinley
Edited by: Laurie McGinley on Sep 28, 2009 12:23 PM

Index could not be created

Hi All.
I have instaled TREX and then declared the name server and port in visual admin and restarted portal
But still getting the error
Index could not be created; creating index failed: Invalid entry in configuration: section nameserver, key address, value tcpip://<trexhost>:<30201> is invalid (Errorcode 7213)
Any suggestions or procedure to integrate portal with TREX ?
Thanking You,
Rukmini

Hi,
if this is your exact error message:
creating index failed: Invalid entry in configuration: section nameserver, key address, value tcpip://<trexhost>:<30201> is invalid (Errorcode 7213)
Than you have not changes the value <trexhost> do your real trex name server host name.
And that's why all the lights in TREX monitoring from your application point of view must be red.
Best regards
Frank

Trex Index could not be created HTTP server error: 503 (Errorcode 7266)

Hi Friends,
I have installed EP6.0 SP15 on one machine and Trex 6.1 on another machine.All the services are green in the Trex monitor.And also i am able to get a reply from http://host:30205/TrexHttpServer/TREXISAPIExt.dll?CMD=PING.Connection sucessful.While creating my first index in Index Administration i get this error message.
"Index could not be created; creating index failed: HTTP server error: 503 (Errorcode 7266)."
Please tell me as to what steps i am missing and also where can i see the log message in portal.
Thanks
Sidharath

hi friends,
I went through the settings of trex services on server and found out that even after installing IIS 6.0 it was showing the path of Apache that that is i think the reason that httpserver is green but it is not using the CPU resources.I will share the setting with you.
[queueserver]
executable=TREXQueueServer.exe
arguments=-port 30204
startdir=C:\usr\sap\trex_02
starttime=5000
instances=1
#hp_32:environment=_M_ARENA_OPTS=1:256,_M_SBA_OPTS=512:100:16
As the executable for queserver is there so it is using cpu resources.
[apache]
executable=httpd
arguments=-d C:\usr\sap\trex_02/Apache -R C:\usr\sap\trex_02/Apache/libexec -F
startdir=C:\usr\sap\trex_02/Apache/bin
instances=1
As there is no folder for apache in trex installation so i think it is not working.Please check the setting in Trex Administration->Configration->Choose name server and on the right botton of it is edit services.Double click it and you will see the settings as i have shown above.Please share the settings with me as i will be then able to work with trex.
Do i have to install Apache instead of IIS6.0.Please guide me.
Thanks
Sidharath

The required index has not been created yet in the search engine

Hi,
I am trying to change the inspection plan trying to add master insp.characterstics in QP02 the system is giving the following error: "The required index has not been created yet in the search engine". As per the solution for that error The administration transaction is SES_ADMIN.
Through the Goto menu, you can enter the relevant customizing directly.
The index was required for: Business object = QPMK
Object type = 1
It is already there. I don't know why still it is showing the error.
How can i fix this?
Pl help me. Thanks.
Madhu

Hi,
Not so sure this applies as
1] The field is using a custom search help which correctly appears for data selection in each case. Its only when we push the go button that the index missing error ishappening for the particular user.
2] We cloned the user id for the user having the issue and the clone has no problem at all using the search help.
Weird huh?
Ross

"Index could not be created: There are no active http servers known at the

Above error shows up during Index creation on KM section of the portal.
Checked the TREX Admin tool for Http connection . Pop up Error saying "IIS not installed. Configuration of Http communication not possible ".
Environment : TREX 7.1 revision 43 on Windows 2003 64 Bit platform.
During installation of standalone TREX , there were no option to select "http server".
Please suggest, if i am missing some thing in the setup or configuration here.
Thanks in advance .

1.) You need to make sure that the server you are installing TREX on, also has a Web Server. In your case, Internet Information Services (IIS 6.0) which comes with Windows Server 2003. Once this is installed make sure that it is working (http://hostname or IP).
2.) TREX 7.1 Rev 43 is very mature and does not involve many steps during installation. Your only option is to choose whether you want to install it or not.
3.) Setup of the "http connection" or "ABAP connection" is done after TREX installation. This is done straight from TREX Administrator.
Here is my suggestion:
1.) Install IIS 6.0 (http://www.windowsreference.com/windows-server-2003/step-by-step-guide-how-to-install-iis-60-in-win-server-2003/)
2.) Reinstalling of TREX is higly recommended but you can try it with the current installation.
3.) Open up TREX Administrator (trexadmin.bat) and proceed with create IIS Websites for TREX 7.10. The steps are located under the heading "Configuring the TREX Web Server" in the installation document.
4.) After this, go on with Indexing.
Regards,
Ravi

Is it allowed to Create your own indexes on not-udf fields

Hi all
I have a customer who ask if it is allowed to add you own clustered indexes on the SBO Tables on the Fields that are not UDF.. Example:
GO
CREATE NONCLUSTERED INDEX [<Name of Missing Index, sysname,>]
ON [dbo].[RDR1] ([LineStatus],[U_ET_1_3])
INCLUDE ([DocEntry],[LineNum],[TrgetEntry],[ItemCode],[Dscription],[Quantity],[Price])
GO
I have always assumed that such a thing is not legal, but can someone confirm this and perhaps point me to documentation or SAP Note that states this?

Hi Rasmus,
Thanks for posting in our SAP Business One forums.
As you already stated the use of index was not approved to be implemented in Business One databases.
However, it some specific cases, indexes had improved performance in a very effective way.
Note 1376447 - "Support scope for SAP Business One database index creation" allows to implement it under SAP' support approval.
Here an extract from the note.
While analysing the performance of a customer database if you discover that the addition of an index can improve the performance of the database kindly contact SAP Business One Product Support in order to get approval to add this index to your database.
Please note it is not possible for SAP Business One Product Support to fully test all modules in SAP Business One. As a result we are limited in the testing we can do to verify the overall performance. In such cases even if the index is approved, SAP is not responsible for the impact the index might have on the overall performance of the database.
With kind regards,
Juan Manuel Marrero
SAP Business One Forums Team

TREX error Index category could not be created: Exception 8,Error

Hi,
I am geting the error while creating the index on TREX 6.1. In t-code SKPR07 I have check the application log and got the following error and I am not able to create the index. Moreover I have check all setting as per installation document its looking fine. Please help me.
error:-
Index category could not be created: Exception 8, Error
Message no. INDEXING015
Diagnosis
An error occurred when a new index category was generated using the
function module SRET_IDXCAT_CREATE.
Thanks,
Harshal

Hi Harshal,
i just found your Question here, while I was searching the SCN for a solution. Because I had the same Issue.
In the SAP Support Portal I found the SAP Note 1512896 - KPro: Index category could not be created.
Take a Look at it. I guess, that could solve your problem (if it´s still exists)
Regards
André

Application Table Index not being created

Since this is slightly different than my last post, I created a new one.
I am using the example as a basis to complete the Bulk process from the Staging table to the Application table with the following code snippet:
public void completeBulk(String completeBulkFlags) throws Exception {
GraphOracleSem graph = null;
try {
graph = getModel().getGraph();
try {
graph.dropApplicationTableIndex();
} catch (SQLException e) {}
graph.getBulkUpdateHandler().completeBulk(completeBulkFlags, null);
graph.rebuildApplicationTableIndex();
finally {
if (graph != null)
graph.close();
It appears to be dropping the 'applicationTableIndex', however when the call 'rebuildApplicationTableIndex' the <MODEL_NAME>_IDX does not exist in the database. And i'm not seeing errors anywhere alerting me that the index was not created.
Since this index is not created, deletes on the model do not have an index to scan over the <MODEL_NAME>_TPL table and takes forever. For the time being, we are creating this index manually. However is there something that we are doing wrong using the Jena Adapter API?
We are using the newest Jena Adapter and 11.2.0.3 Database instance.
Thanks
-Michael

Hi Michael,
Your code looks fine.
Hmmm. That is strange. The code path for rebuilding application table index is quite straightforward. Can you please drop your own index and re-run the following by itself?
graph.rebuildApplicationTableIndex();
Thanks,
Zhe Wu

Passing different parameters per index count

I haven't used LabView for a number of years and forgot way too much. I'm trying to create a simple task for a VI and not having any luck.
I am using a FOR LOOP and need to pass different parameters to an instrument with each index count. I will use four counts and I have three parameters to pass for each count. The parameters are known and constant. I need to be able to load the paremeters into a structure and then pipe each out to three different functions.
It seems so simple but I haven't found a way to do this.
Thanks in advance
- Bill

One easy way to do this is to wire the for loop iteration count to a case structure (wire directly to case terminal, and create a case for each iteration). For this to work you have to know ahead of time how many iterations you will have, what each one will do, and preferably the same data type for each parameter, perhaps a string.
(What part of Colorado are you in? I'm in Fort Collins. Just curious who else is using LabVIEW in my neck of the woods)
Regards,
Jon
Message Edited by jmcbee on 10-01-2008 03:42 PM
CLA, CLED, CTD,CPI, LabVIEW Champion
Platinum Alliance Partner
Senior Engineer
Using LV 2013, 2012
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.

What is the "No database index" means when you Creating Secondary Indexes?

HI,
   I'm Creating Secondary Indexes in the maintenance screen of the table(se11)
   There are three options under "Non-unique Index":
   1.Index on all database systems
   2.For selected database systems
   3.No database index
My questions is :
What do u mean by "No Database Index" and when is it used.
Can anybody plz tell me what's the difference of this three options ?
Here is what i found in the help:
   No database index: The index is not created in the database. If you
   choose this option for an index that already exists in the database,
   it is deleted when you activate this option.

Hi,
It is clear from the help documentation,
Here see what the help document says:
Create the index in the database (selection)
Whether an index improves or worsens performance often depends on the database system. You can therefore set whether an index defined in the ABAP Dictionary should be created in the database.
This makes it easier to install a platform-specific customer system.
You can set this option as follows:
1. Index in all database systems: The index is always created in the database.
2. In selected database systems: The index is created depending on the database system used. In this option, you must specify the databases in which the indexes are to be created. You can do this either on an inclusive (list of systems on which it should be created) or an exclusinve (list of systems on which it should not be created) basis. In either case, you can list up to four different database systems.
3. No database index:: The index is not created in the database. If you set this option for an index that already exists in the database, it is deleted when you activate the table in the ABAP Dictionary.
Note: Unique indexes have an extra function, and must therefore always be created in the database. The database system prevents entries or index fields being duplicated. Since programs may rely on this database function, you cannot delete unique indexes from the database.
Hope it helps you,
Regards,
Abhijit G. Borkar

Primary index does not exist in database but shows in SE14?

I added a couple of key fields to a Z table and activated it. Every thing went well - adjusted it with SE14 also.
When I checked the Runtime object - it is OK.
When I checked Database Object, it is showing that the Primary Index does not exist in Database but SE14 says that the Priamry Index exists in Database.
Please advise how to correct this. I saw another psoting when I searched per this error message: "Indexes: Inconsistent with DDIC source" . It tells to create this index at Database but need to know the steps.
pl advise.
(reposting here)
Edited by: Venkatabby on Mar 26, 2008 4:05 PM

hi,
To create a index for a table,
go to se11->click on Indexes tab and create a primary index.
Indexes speed up data selection from the database. They consist of selected fields of a table, of which a copy is then made in sorted order. If you specify the index fields correctly in a condition in the WHERE or HAVING clause, the system only searches part of the index (index range scan).
The system automatically creates the primary index. It consists of the primary key fields of the database table. This means that for each combination of fields in the index, there is a maximum of one line in the table. This kind of index is also known as UNIQUE.
If you cannot use the primary index to determine the result set because, for example, none of the primary index fields occur in the WHERE or HAVINGclauses, the system searches through the entire table (full table scan). For this case, you can create secondary indexes, which can restrict the number of table entries searched to form the result set.
You create secondary indexes using the ABAP Dictionary. There you can create its columns and define it as UNIQUE.
reward points if useful.
regards
sandhya

Warning: Index does not exist in database system MSSQL

Hi,
After activating the Index from SE11,
I receive the following Warning:
Index does not exist in database system MSSQL.
What does this mean? Has performance been increased or does the index 1st have to exist in the database system MSSQL?

When you create index at SE11 and you need activate database utility.
utilitities-database utility->then click activate and adjust database.
else you can use SE14 and so that Index will create databse level.
Reward Points if it is helpful
Thanks
Seshu

Index does not exist in database system ORACLE??????

Hi Experts,
I created a Secondary Index in DEV, its fine and the message is,
Index KNA1~Z01 exists in database system ORACLE
I moved it to TEST and there I got the message is like,
Index does not exist in database system ORACLE
So,
1 - Wht I hv to do now? Shuld I see BASIS people?
2- Why its happened like that? Coz of not enough space?
ThanQ.

thanq sudheer,
I got the return code as 4, so Can I go for creation of new request and there by moving to test?
1 - Anyways, so, after Activating Seconadyr Index, Shuld I come back and Do I need to activate the Table also?
or
2- Just activating the index is enough?
thanq.
Message was edited by:
Srikhar

Index does not exist in database system DB6

Hi,
Problem : Index does not exist in database system DB6.
I need further explanation why when i transport index from Development Client to Production Client the index is active but does not exist in database system DB6.
So when the cases is occurs i must re-create the index again in Production Level...
Can someone give me some ideas?
Thanks.

Hi,
it might be due to some BUG in RDBMS...
First Check the Secondary index in TEST system
Look at the Transport Number in DEV system, If this is having error, then it will show you the error details also,
If that not moved Properly then you need to create another request for the INDEX and move it again
See the threads with similar problem...
Warning: Index does not exist in database system MSSQL
Index does not exist in database system ORACLE??????
Re creation of database index
Hope it will solve your problem...
Reward Points if useful
Thanks & Regards
ilesh 24x7

INDEX count not be created

Similar Messages

Maybe you are looking for