Indexing of NMH 410 Never Stops

Indexing of NMH 410 Never Stops.  Does anyone from Linksys or Cisco have a solution?

I've been reading for 6-7 months.....  I've been on the phone with technical support so many times with "level 2" techs and they can't fix it. 
My reading does nothing but bring be back to the same spot like a dog chasing his tail.   I even went through each file and folder to make sure that the naming conventions are correct as the NMH 410 will not accept anything outside of naming convention for the type of LINUX they are using.
I now remove the CAT5 cable when I'm not using the NMH 410 and my Network as a whole runs better as the constant rescanning of the NMH 410 seem to clog up the Newtwork.  
If Linksys fixes the bugs with a new software release I'll be surprised as it's been a long time since we've asked for help.  I guess we can wish for the best.
(Mod note: Edited for guideline compliance.)

Similar Messages

  • Verity vspider.exe process never stops and sucks system resources

    I'm running a scheduled task to index a site on a Win2k3 server running CF8. I'm having a problem where the vspider.exe process never stops and sucks up system resources, slowing my whole server down. It actually is doing quite a bit of work... I'm directing the output into a log file, and I'm getting 300 K of information and it seems to be walking the site just fine. But it ends up not finishing the job and running forever. I have to open the task manager to terminate the process and then the server runs better.
    Any ideas?

    I have not found an answer to this problem, though it hasn't been a problem lately. I now send the output of the vspider.exe process to a log file and can check the status of the index job. I index nightly, so if the process is running at anytime, I can look at the results of the index job in my log file. This might give some clues. I have a feeling I had a corrupt index and vspider was choking. Try rebuilding your index from scratch.

  • Background and Screensavers never stop processing

    When I try to change my Desktop Background it says loading images but it never stops and the only way out is to force quit System Preferences

    Rebuild the Spotlight index of your home folder.
    Spotlight: How to re-index folders or volumes

  • Spinning Cog Never Stops Under Mailbox

    Ever since upgrading (now 10.6.1), the progress status spinning cog never stops next to my mailbox. I can send and receive mail without any problems. How can I stop this?

    It went away after I quit and restarted the program. I think it had to do the the new indexing for Spotlight, since I just installed Snow Leopard.
    Thanks.

  • Imac stuck at white screen loading and never stops.

    I recently ran a virus scan, and may have deleted important Apple files. Now, ever since I've turned it off, it won't come back on past the loading screen. It just keeps spinning and never stops. I did a hardware scan and everything seemed to be good. Do you think I should reinstall the boot discs? Will this be a problem since it won't stop loading? Any other suggestions?

    Glad you are booted and running!
    I can't help you with the Digidesign Pro Tool thing, but I did find a couple of articles that might.
    http://www.digidesign.com/index.cfm?langid=1&navid=54&itemid=22904
    Note: 10.5.2 is not yet supported
    http://www.digidesign.com/index.cfm?navid=54&itemid=29248&langid=1

  • I am getting frequent lock-ups and blue screens during boot up. The lock ups occur during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button. Ideas?

    I am getting frequent lock-ups and blue screens during boot up on my Mac Pro.  The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
    I had the Mac Defender malware and I have used apple jack but still having issues.

    I am getting frequent lock-ups and blue screens during boot up on my Mac Pro.  The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
    I had the Mac Defender malware and I have used apple jack but still having issues.

  • TS2756 hotspot is not working on myiPad 3, hotspot tap is cellural data always appear that it is searching, and never stop. Vodafone and tradeline told me that there is no problem with carrier and Sw. Tethering data is never kept.

    Hotspot appear always to search and never stop
    internet is not working without internet APN data
    Tethering APN  never save the data
    Vodafone carrier checked and mentioned that the no problem with the SIM
    Tradeline checked and the IOS was latest 6.1, but asked to reinstall from scratch
    Please advice

    I have this _same_ issue, exactly.  Initial backup goes just fine, but incremental backups fail.  And like you, I replaced the internal drive.
    The failures didn't start occuring long after the original drive was replaced--which was about 1 year ago.  The new drive was non-Apple and worked fine--and tests fine now as well when outside the TC.  But suddenly incremental backups started failing when the TC firmware and utility app were updated about 2-3 months ago.  I even swapped the internal non-Apple drive for another known-working non-Apple drive, and same results.
    I strongly suspect Apple added something to the firmware to check if it's an Apple or non-Apple drive in the TC and, if the latter, maybe causes incremental backups to fail.  This is only speculation and, obviously, the initial backup still works, so any checksum like this would have to be only during the incremental backup process.
    I'll be checking into this thred to see if others have the same issue, or if a solution is found.  Hopefully my hypothesis is just para-apple-noia and it's some small, easy-to-fix issue.
    -Gizm0d0

  • ITunes 7.6.1...the torture never stops

    I have to say upfront that iTunes 7.6.1 is the worst version. Ever.
    I couldn't use 7.6 because I got spinning beachballs ALL the time. Had to revert backwards. When 7.6.1 came out I gave it a go and things have ben great.
    Until now.
    I decided to rent my first movie via iTunes last night. It's not been played yet, but it seems ever since I DL'ed that rental, iTunes is essentially useless. I can play a song and within 10 seconds the beachball comes up and never stops. I can't play another song. I end up force quitting. I won't even try to play the movie rental for fear it'll freeze up during playback and then I'll be screwed.
    So, it looks like I'll have to go back to a previous version. Again. Make that twice now. I hate 7.6.1 and 7.6. Now I'll have to search the forums to recall how to go back to a stable version rather than watch the movie I downloaded to watch at this time. Then I won't be able to watch the rental on a previous version and I'm screwed out of a rental.
    I won't go back to another version (after I revert today) until 7.7 comes out. I am also irked that Apple apparently is in no hurry to address the many issues this version has. 7.6 acts like a Beta version and I've no idea (other than $$ from rentals) why they released such an unstable version. It's so Un-Apple like and more like the Borg from Redmond rather than the Cats from Cupertino.

    Have you tried it with a different users?
    Repaired permissions?
    Ran Disk First Aid?

  • IPod "Do not disconnect" message never stops

    I get an error message (The iPod "Tubby's iPod" cannot be ejected because it contains files that are in use by another application) when trying to eject my iPod from iTunes and computer. The iPod never appears to be finished with updating even though iTunes software states that the update is complete (“Do not disconnect” message never stops flashing on iPod).
    iPod info: 30GB iPod Video, iPod Software 1.0 (iPod with Video), updated on 11/7/05
    iTunes info: version 6.0.1.3, CD Driver 2.0.4.3, CD Driver DLL 2.0.3.2
    PC   Windows XP Pro  

    I had the same problem and this helped. Hasn't happened again. Good luck..
    http://docs.info.apple.com/article.html?artnum=61135
    Ipod 60gb   Windows XP  

  • Hey guys i was wondering if i could downgrade my iphone 5 from ios 7.1.1 to 7.0.6 or .0.4 i have 7.0.6 and .0.4 shsh blobs but when i try to build a custom ipsw using ifaith it loads and never stop loading is there any way to downgrade to older ios 7 ?

    Hey guys i was wondering if i could downgrade my iphone 5 from ios 7.1.1 to 7.0.6 or .0.4 i have 7.0.6 and .0.4 shsh blobs but when i try to build a custom ipsw using ifaith it loads and never stop loading is there any way to downgrade to older ios 7 ?

    No, you cannot downgrade your iOS device. That's not supported by Apple.

  • I am unable to sign into my account through Adobe Elements 12. I can sign in on Adobe's website, and through Revel online, and through my smartphone, however when I try to sign in through Adobe Elements 12 directly, the hourglass never stops turning, and

    I am unable to sign into my account through Adobe Elements 12. I can sign in on Adobe's website, and through Revel online, and through my smartphone, however when I try to sign in through Adobe Elements 12 directly, the hourglass never stops turning, and turning.

    Hi,
    Have you tried working through this document - it does apply to Elements as well.
    Sign in, activation, or connection errors | CS5.5 and later
    If you still have problems you may need to contact the Adobe activation team - see the "Still need help?" link at the end of the document.
    Good luck
    Brian

  • When I turn on my imac all I see is a white screen, the apple icon and a spinning pin-wheel that never stops spinning.  My computer is stuck!  Any Suggestions?

    When I turn on my imac all I see is a white screen, the apple icon and a spinning pin-wheel that never stops spinning.  My computer is stuck!  Any Suggestions?

    Follow all the steps at > Mac OS X: Gray screen appears during startup

  • Hard disk never stops spinning

    When I connect my iPod to my Macbook the hard disk never stops spinning. When I connect it to my PC spinning stops after sync with iTunes and just turn on when I access the iPod.
    Does anybody know how to turn that off?
    Or is Spotlight scaning the data on the disk?

    Or is Spotlight scaning the data on the disk?
    Even it is doing the scaning, it could have been completed and stop. Have you tried to do the Restore for your iPod?

  • Itunes download never stops

    Now and then when I download songs to itunes the download never stops.  It says download is 100%.  Clicking on the x or pause has no effect. It says download is 100%.   The song appears in grey on the list with the full progress disk at the left.  But when I click on the song it plays all the way through.  I have to close itunes and open it again - I have to go through the activity monitor to do that; force quit doesn't work - to make the problem go away but that doesn't always work either.  Is there a fix?  Thank you.

    Now and then when I download songs to itunes the download never stops.  It says download is 100%.  Clicking on the x or pause has no effect. It says download is 100%.   The song appears in grey on the list with the full progress disk at the left.  But when I click on the song it plays all the way through.  I have to close itunes and open it again - I have to go through the activity monitor to do that; force quit doesn't work - to make the problem go away but that doesn't always work either.  Is there a fix?  Thank you.

  • ICloud mail never stops trying to get new mail

    Running 10.7.2 on my MacBook Air, the whirling symbol indicates that the iCloud account never stops looking for new mail. Other accounts do not do this. This does not occur on my MacPro, my I pad or my iphone, either. Is there anything I can do to stop this?

    Hi Markyd1973,
    Welcome to the forum and thanks for posting. I'm sorry about the delay getting your line connected please use the 'contact the mods' link in my forum profile under the 'about me' section to send in your details and we'll check with Openreach for an update. You can find the link by clicking on my username.
    Thanks
    Neil
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Maybe you are looking for