Inexpensive board with LAN and VGA

Guys,
I need and advise from you. I have a server at home which serves in-house content + is doing some other stuff for my Dinamips lab. I'm hitting memory performance bottlenecks, because it's running on slob 400Mhz single channel memory, during video decoding/coding operations and I want to fancy it up a bit. So far I had very positive expirience with the MSI boards, despite first roadbumps with the BIOS and other stuff, but, nevertheless, lesson has been learned and the systems are stable. I need to choose the motherboard that will be capable of the following:
1) Being able to reconstruct RAID 1 from one master disk and one slave without damaging the master
2) Have very elementary video chip on board with VGA DSUB
3) Be able to support dual channel memory up to 1066 or even higher
4) Processor support is not that relevan as I have both Athlon X2 as well as Intel DualCore processors to spare
5) And, the last but not least, have 1G lan
What would you suggest?
Cheers Mat

http://www.msi.com/html/popup/MB/newrule/
http://www.msi.com/index.php?func=compareindex
http://www.msi.com/index.php?func=shoppingform

Similar Messages

How to connect my Mac Air 13" to my Philips display with DVI and VGA ports?

How to connect my Mac Air 13" to my Philips display with DVI and VGA ports?

Use a DVI to micro-DVI adapter if you're on an original MacBook Air, and a Mini DisplayPort adapter for a newer one.
(119682)

You still produce displayport adapters with HDMI and VGA (together)?

You still produce displayport adapters with HDMI and VGA (together)?

We are not Apple, just end users like you. That said, I do not see any such items among these listings on the Apple store:
http://store.apple.com/us/accessories/all-accessories/cables-docks#!
I'd try Other World Computing:
http://eshop.macsales.com/search/video+cable

KT4V (with lan) and TV Tuner Cards

I have a MSI motherboard model MS6712. This device isn’t compatible with any PCI TV Tuner Card. When I am using a tv-tuner card, after some minutes the computer crashes and the only way is turning off the computer by switching off the power. This problem happened with four tv cards which I have used. My motherboard has been replaced two times with others MS6712 motherboards. But the problem, which doesn’t happen on a MSI MS6385, is still persistent. Drivers and Bios are up to date.
My motherboard has known incompatibilty with any tv tuner card? I think that this problem affects any MS6712 motherboard.
Anyway the problem is surely caused by the hardware or by a defective BIOS.
My Pc:
Motherboard MS-6712 + lan
Athlon XP 2000+
VGA GeForce 4 MX440 - 64MB SDR - APG 4x
Maxtor Diamond Max 9 Plus - 60GB
DVD Rom LiteOn LTD-163
CD-RW Artec WRR-52x
TV Tuner Maxron (Wayjet) with Conexant BT878A and Philips Tuner
Modem 56k Conexant
Power Supply SUNTEK 250W

Or this Power Supply SUNTEK 250W

Problem with audio and vga adapter in presentations

this is an odd problem. I potted a presentation that contained a qt movie. The video plays with sound just fine via the vga adapter until you plug in an external speaker system or earphone. the sound stops.
if you play a video outside keynote or play the video with out the video vga adapter or just unplug from the audio jack it works fine. am I missing something or is this a bug. For the life of me I can not figure out what the VGA in keynote has to do with audio.
John

Dr. John, this might be a little simple of an answer, but is the video jack pushed all the way in?
I had the same issue with my ipad playing a movie over a sound system and projecting it also, and discovered that the Apple issue iPad cover comes very close to interfering with the audio output jack, and that my plug into that jack wasn't all of the way in.
After that it's worked fine.

I bought a new MBA and are having problems with HDMI and VGA port

Hi,
I just bought a new mac book air, and at the apple stre they recommended me a mosh mini to vga cabel. I need to use my computer for projector either hdmi or regular vga adapte. The new mba only has thunderbolt, usb, memory/card slot, microphone and headphone ports.
Does anyboody has and idea how i will or how do i connect the hdmi or vga adapaters to the computer. I have been searching on the cables the apple store has available but the end that goes into the computer is not compatible with the ones I mentioned above.
Please any help would be of great help, because I dont know what to do. I think this is a problem with the new MBA.
thank you,

Thank you doubr. So what I need is to buy the thunderbolt cable and the minidisplayport to vga adapter or the griifin mini display port to hdmi tht toothpickproductions recommends, is that correct?
The one I have is a mini dvi to vga adapter and the end that goes into the computer is the same one that the minisdisplayport to vga adapter or the griffin one have, and is too big to go into the new mba. I dont know if I am confusing you more with what I am saying.
check the link below and you will see the ports the mba has
http://www.apple.com/macbookair/specs.html
if you see the ports that mba has, the two minidosplayport that are recommending do not fit..
So, do you know that if I buy the thunderboldt cable will either of the two minidisplay ports fit or I need to buy another adapter for the minidisplay ports??
thank you because I am kind of confused, I did not have this problem with the macbookpro I had before...

Zc706 board with PCIe and SFP with tandem boot

I am trying to add gigabit ethernet via SFP (ala xapp1082) to the zc706 pcie trd reference design and I get the DRC error:
[Drc 23-20] Rule violation (HDTC-6) Non-stage-one logic illegally placed - Non-stage-one logic 'z7_pcie_trd_i/gig_ethernet_pcs_pma_0/inst/pcs_pma_block_i/transceiver_inst/gtwizard_inst/inst/gtwizard_i/gt0_GTWIZARD_i/gtxe2_i' is placed at site 'GTXE2_CHANNEL_X0Y10' inside stage one Pblock 'z7_pcie_trd_pcie_7x_0_0_main_pblock_boot'. Non-stage-one logic should not be placed inside a stage one region.
Which I take to understand that the gigabit transfer for the SFP is in the tandem stage 1 boot area (the small .bit file just for enumerating the pcie port) and it needs to be in the stage 2 area. Can it be moved to stage 2 and if so how? Or can that DRC error be suppressed safely?
Thanks,
Clark

yes you do that in the XDC files. Give the Location constratints for the GT which you want to lock. IF you are using the SFP, then the GT locations are primiary fixed based on the locations of the SFP's. You can check those locations from the ZC706 user guide. You can give pin locations to these for the GT TX, RX outputs which will automatically lock the GT hard blocks as required.

Mac Mini (Late 2014) 2 display HDMI and VGA

Hi,
I got my new mac mini and i have 2 display. One is with HDMI, other is VGA.
I will use normal HDMI port and thunderbolt port with Mini DisplayPort to VGA adapter from Apple to use them both, and i want to "Extend" my screen but the Apple guy on the store told me that "you only can duplicate the screen, can not extend it; both your HDMI and VGA monitors screen the same thing."
Is it correct? Because i think he is not sure about what he said it doesn't make sense to me.
Regards.

I have no idea where what person is getting his information. I have used yur arrangement on my 2012 Mini which has one HDMI and one Thunderbolt port.
You sense is better than that person's. You you can have extended display with HDMI and VGA via mini displayport (plugs into Thunderbolt port) to VGA adopter

HDMI and VGA output adaptors?

i have sony series laptop with HDMI and VGA outputs are there any adabtors to use this display?

AppleTV is not a display, it plays media to an HDMI equipped TV.

Can't switch between HDMI and VGA displays

I have a new H430, with hdmi and vga ports. My HP zr2240w monitor permits switching between AVG and HDMI displays, which I would like to do. But when I plug in both cables (HDMI and VGA) only VGA will work. If I switch to HDMI or make it the default display, the screen freezes at the desktop background: no mouse, no taskbar etc. Is is possible that the D430 video card will not support switching between displays (on a single monitor)
thanks,
saintmaur

Dear Monika and Mylenium: I figured out part of the problem, but not the solution: The shape I had drawn -and coudn't switch between fil and stroke on-is one I had already done a gradient mesh on, too. I had later abandoned the gradient mesh by using the option key to delete mesh lines, but that didn't take the shape all the way back to its original flat state. So it wasn't a plain drawn shape any more. So how do I release the gradient mesh to get back to a flat shape? I'm also having trouble keeping the shapes in RGB or CMYK mode-they keep defaulting back to greyscale. Could that also be a symptom of using gradient mesh? Note: I'm using gradient mesh for the very first time now; I've never used it before. It seems to leave a lot of unexpected baggage behind. I would send a screen shot, but if I start up Grab or Voila, all the AI pallets go away, and that's half the information. So how do I control gradient mesh?

Problem with Jabber and file transfers WAN - LAN-Users - a solution!

Hi,
I read a lot of messages about problems with file transfers between iChat-Users, if one (or both) are behind a NAT.
I had this problem to and found an easy solution:
My situation
iChat-Server behind a Netgear ProSafe FireWall. I opened the needed Ports including Port 7777 (the Port for the iChat-proxy (proxy65).
The iChat-Server is configured to host the domain "server.ourdomain.com" (as an example).
This address can be reached from the LAN and also from the WAN-side.
From the LAN-side the DNS redirects to 192.168.1.1, from the WAN this domain redirects to our official IP-address (the WAN-IP of the FireWall).
I tried nearly all kinds of mentioned solutions, but nothing helped.
The really easy solution is: I just added our official IP to the "Hosted Domains" in the iChat-section of Server-Admin.
After that change, the transfers are made via the proxy65 of iChat-Server. The transfers are shown in the log /private/var/jabberd/log/proxy65.log.
I think, that the other posters who also have this kind of problem are working in a similar setup (domain name of server is used from the LAN AND the WAN-side with different IP-addresses (LAN-IP & WAN-IP).
This solution will only work, if the WAN-IP is a fixed address.
svenc

Until the introduction of file promises in AIR Athena, it has never been possible to drag remote files out of an AIR application.
You could refer to the http://www.adobe.com/devnet/air/flex/articles/using_file_promises.html
Hope this is helpful. Please let me know if I could help more.

Hi... I am looking for an inexpensive app for my macbook pro that I can put pictures and videos together into a slideshow with captions and music WITHOUT a watermark and that also will burn the slideshow to a DVD in its own app. Help?

Hi... I am looking for an inexpensive app for my macbook pro that I can put pictures and videos together into a slideshow with captions and music WITHOUT a watermark and that also will burn the slideshow to a DVD in its own app. Help?

The issue with the A1400 is that like most economy compact cameras, they will not have very fast focus times in indoor lighting situations. Many people have gone to entry level DSLR's (Canon T3i) or micro 4/3 cameras. They are fairly expensive, but a late model refurbished T3i can sometimes be found with a kit lens for about $300.00. With Auto and scene modes, as well as full manual modes, these are very versatile cameras that focus very quickly, even in lower lighting situations. Canon is not really into the micro 4/3 cameras, instead they are focusing on the new G7x and G1x cameras, which are way out of your price range. The A720 is still available used at some places such as KEH camera, but you'll need to check often as their stock changes constantly. Obviously the DSLR's don't use AA batteries, but the T3i is good for about 600 photos (or more) per charge.
My refurbished DSLR was practically brand new condition when I got it. I could not find any sign of wear at all, so I feel they are a real bargain. These are rugged cameras that are made to last. The A1400 is a $99.00 camera, so it's not intended for heavy usage, plus the image quality of a DSLR (even entry level) is far better than the A1400. That would be my recommendation.
Steve M.

BasicTx and BasicRx daughter boards compatibility with USRP2920 and LabView

I want to know that BasicTx and Basic Rx daughter boards from Ettus research are compatible with USRP2920 and Labview or not.
Also do these boards supports variable gain or not? Please confirm
Thanks
JK
Solved!
Go to Solution.

They will work but you need to use property nodes to configure them. Ther is no LO so ther is no center frequency parameter. I and Q are separate channels so you will need to break them apart and treat them as such. There is no gain because the boards essentially provide access to the ADC.

MOVED: Multiple Displays with AGP and ON-Board

This topic has been moved to AMD SocketA based board.
Multiple Displays with AGP and ON-Board

Glen i just wanted to test try something new.
I want to know if there are anything i should know about my board?
Do you think the KM4M-V is a good board to have?

How to calculate SNR and BER using USRP 2920 with LFTX and LFRX daugher boards.

I have few questions regarding SNR and BER measurement:
I am using two USRP 2920 with daughter boards LFTX and LFRX. One is completely Tx and anothe one is completely Rx. I have following few questions:
Q1: How to control/change Energy per bit (Eb) in LabView? Since for calculating BER you have to increase SNR, and for increasing SNR you have to increase Eb. So can anybody guide me how to increase Eb in LabView?
Q2: Can any body tell me about the noise floor of the above mentioned daughter boards?
Q3: How to set the transmit power of the USRP in LabView? What is the maximum power the above mentioned daughter boards can provide and How should I adjust the "Gain" parameter to transmit the signal with the maximun power?
Thanks
JK

Hi JK,
The energy per bit calculation, as I understand it, is the ratio of the signal power to the bit rate. This means that to increase it, you have to either increase the overall power you are transmitting or decrease the user bit rate. In LabVIEW, you would do this by increasing the gain or by decreasing the IQ rate.
I'm not sure of the noise floor on those boards, but I did have a question. The USRP 2920 is sold in a particular configuration. Did you take it apart and put in the LFTX and LFRX boards? Or is it an Ettus board with these daughterboards attached?
-Jim B
Applications Engineer, National Instruments
CLD, CTD

Inexpensive board with LAN and VGA

Similar Messages

Maybe you are looking for