Info records for free items

Hi gurus,
we have some materials that are free of charge with certain vendors. Is there any way to maintain a price of 0$ in a contract or info record?
The only way I found was to maintain a 100%-discount, but then you still have to manually tick the “Free Item”-indicator for each PO item. Is there any way around this?
Cheers
Alicia

Hi Moore;
Can you try belowed way ?
After that , you can maintain NR00 condition for related organizations.
Regards.
M.Ozgur Unal

Similar Messages

  • Purchasing info records for Cost item

    Hi Experts,
    Is it possible to havea PIR created for a cost item where purchase order is to be created as a cost purchase order & gl & cost center to be entered.
    As per my knowledge we need to have atleast material no. to get info records created.
    What will happen in the case of material which are not having material code & consumed against cost center.
    Are we able co create infor records for such materials.
    Thanks,
    Kiran

    Hi,
    I am not sure about your requirement ...
    But we can create info record for material group if,material code is not available
    check following link
    [http://help.sap.com/saphelp_470/helpdata/en/75/ee107055c811d189900000e8322d00/content.htm]
    Regards
    Kailas Ugale

  • Purchasing info records for PO-items without material master

    Hi gurus,
    I would like to have the system automatically determine certain settings (e.g. reminder/urging data).
    For PO-items with material master there is no problem, because all information can be stored in the purchasing info record, and are automatically found when I enter the material number.
    For items without material number/master I tried to generate a info record for the material group. When I enter the no. of the info record, everything works fine. But the info record is not automatically found, if I only enter the material group no.
    Is there any way to make the system find the info record by itself?
    Thanks
    Alicia

    Thanks to both of you!
    Priyanka:
    How can you create a source list for a material group? I thought this was possible for materials only!?
    Of course, you cannot have more than one info record at a time for a material group. But one would be enough for me...
    Dhruba:
    Thanks for the advice, but I know how to manually select a info record. The point is, I'd like to have the system determine it according to the material group I enter.
    Any other ideas?
    Alicia

  • Info records for service

    How to maintain info record for service items? Can it be updated from quotation?
    Alok

    Hi Alok,
    You can create purchasing info records for different procurement types (standard, subcontracting, pipeline, consignment).
    You can create purchasing info records:
    1. For a material with a material master record, you need the number of the material master record.
    2. For a material without a material master record, the following information is required:
    Material short text (short description)
    Order unit
    Material group
    Sort term (key), for finding the info record once it has been created
    Go through the link, it will be helpful:
    http://help.sap.com/saphelp_47x200/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
    Hope this clarifies.
    Thanks,
    Viswanath

  • Import multiple info records for 1 material item in repository

    Hi Guys,
    I have got sort of a puzzle I can not solve at the moment, maybe some one can help me to solve it. The situation in our system landscape is as follows:
    Systems:
    SRM 5.0 (Classic implementation scenario)
    ECC 6.0
    SRM-MDM 2.0
    PI 2005
    Material master is maintained in R/3 and the materials are replicated to SRM. From SRM we replicate all materials to the catalog repository in SRM-MDM.
    As the material master in R/3 is vendor independent, the materials replicated to SRM also have no vendor attached. For the first initial material replication from SRM to the catalog SRM-MDM this also means that the products in the main table of the repository, u2018catalog positionsu2019, will not have a vendor or vendor number attached (i.e. no reference to a source of supply).
    To assign a source of supply in the repository to a product (record) we will use info records which are replicated from R/3 to SRM-MDM. The mapping for this in the Import Manager can only be based on the product number. As this is the only unique value available which can map a info record to a already existing (but vendor less) ptoduct item in the catalog.
    As long as every item in the repository has only one unique info record, meaning one source of supply with a specific price, there is no issue in the above scenario. Based on the product-id, the info record data will be matched with the material item in the catalog.
    The issue for me arises when multiple info records exists for the same material. The info records can heave different vendors and different prices. All possible vendors should be available in the catalog for the same material (at least this is the requirement ).
    At this point the product-id will no longer be an unique value. Importing the info records will cause problems, as only one material record is available in the repository for the specific product-id (remember that when doing a initial replication of the material master to the catalog, no vendor data is replicated).
    Does anyone had this issue before, and knows a solution? Is it for example possible during the import of the info records in the Import manager, to duplicate material records in the destination data, based on the number of info records available in the source data for the same product-id. Or is there an other solution that I am missing?
    Your help would be appreciated!
    Regards,
    Skander

    Hi Shai & Ravi,
    Thanks for your answers. The MDM version which we are using is 5.5 - currently on SP6
    @ Shai: you are right; the standard SRM-MDM 2.0 catalog repository has a qualified lookup table u2018priceu2019, in which itu2019s possible to store the info record data. The standard fields in this sub-table are: Purchase Org, Amount, Currency Lower B, PIR-ID, price based quantity and Price based quantity UoM.
    I added some extra fields (non qualified), to accompany the remaining info record data (product no. u2013 vendor id  u2013 product category)  which is exported/imported, via the standard extraction program in R/3: Tcode MECCM
    I tried the solution Ravi proposed. This scenario works fine when, for example you want to maintain multiple info records for one specific material record in the main table (all info records related to the same source of supply, i.e. vendor). But as I described, the info records we import for one product can have different vendors. 
    The source of supply (vendor) in the shopping cart of SRM is determined via the u2018supplieru2019 field in the main repository table (which is in itself a flat lookup table ). What happens now is that all related info records are added to the u2018price informationu2019 field of the specific product record in the main table. Thus info records which have different suppliers are attached to a record in the main table which will have one specific supplier in the u2018supplieru2019 field. So from my point of view this will not work.
    I am still stuck with the situation that the material master import will only import one record for every distinct product, which can have multiple info records. The info records can/will have different vendors. As the supplier field in the main table determines the source of supply in the shopping cartu2026. Iu2019am seeking for a solution which will duplicate the material records in the main table, based on the amount of imported info records for that specific material record, that have distinct vendors.
    Shai, if you have some useful info on how you accomplished this requirement on a previous version of SRM-MDM, it would be greatly appreciated if you can share it..
    Thx.
    Skander

  • Subcontracting Info record for Same Vendor which is used in Purchasing vendor

    Hi Gurus,
    When we want to create info record for both standard and sub contract  with one single vendor.,  system is not creating a separate info record.
    It is considering the same  Info record for all the options.  This triggers error -  Info record price does not match.
    Reg,
    Suresh

    Yes.. That's correct. System will just update the same info record number.. But you should not face any problem for price fetching...
    System will work properly for standard PO and subcontracting PO..
    System will compare the item category of info record and PO line item, as per this comparison, system will pick the price from info record..
    You can see in the above screen shot the value 3 indicates that it is for subcontracting PO.
    Standard PO :
    I am just changing the item category from blank to L.
    Subcontracting PO:
    **Edited by: Dëv Päträ

  • Purchasing Info record for a project

    Hi,
    Please let me know whether we can have a Purchasing Info record for a Project specific.
    The scenario is:
    1.  Info record is to be maintained for regular procurement
    2. The procurement team negogiates with the vendor specific for project specific. 
    So, when we make a Purchase order for that project system has to  pick the price specific for that project. For the regular proucrement, system has to pick from the Info record.
    Please note that there may be more than one Project for a material.
    I request you to mao this requirement.
    Regards,
    Phani

    Hi
    What I understood, for your project you want to procure material.See in Project, system will create a Purchase Requisition from Network.Already you have material master for items you want to procure.Maintain Info record with vendor, material combination.If you don't have Plant or Purchase Organization for Project you have to create Plant & Purchase Organization for Project System.
    When you creating PO, system will ask for Plant.
    Sysem will autimatically fetch the Price form Info record and other conditions like excise and CST, you maintain in Condition record in MEk1 and FV11(for Tax) respectively.
    Any doubt.
    Warm regards
    PKB

  • Calculation of sales tax for free item

    Dear SAP B1 Experts
    I have query regarding sales tax calculation for free item .
    For EG.  I have two item for sales (A = 1000,  B = 100)   Sales tax is VAT4%
    But when i am doing sales, i am selling B for free of cost with A for Rs 1000/- 
    here my tax calculation is (1000 *4%)  = 1040/-
    but as per the govt sales tax rule, we are liable to pay the tax for free item as well
    So I this case, In SAP B1 how we will calculate the tax 4% for free item  .
    Please help me.
    Thanks

    i have checked, its working okay, but
    in Invoice print out unit price and line total is showing for free item.  How i make the unite price 0 .
    Tax only calculation is based on the Line total and the line total is based on the unit price.
    in that case when i give the invoice to the customer.
    It should show like this
    Item A       100   * 10         1000
      "    B           0   * 1              00
                                             1000
    4% tax                               44
    Doc Total             =           1044
    thanks
    Regards

  • How to use Purch. Info Record, for different Valuation Types ?

    Hi All,
    While doing Split Valuation,
    I have created three valuation types - say,  M1,M2,M3. for material M.
    Now, I want to create Info record for material M and Vendor V1.
    when i go to me11, system is allowing me to create info record for M and V1 once only,
    in Purchasing Organization View, I'm getting the Valuation type field,
    but can't entering 3 prices for 3 valuation types,
    such as in Material Master.
    Can any one help me regarding this....
    Thanks,
    Anand.

    if u create po with info update indicator then u can use your valuatiion type in po for whihc there is no ifo recrod existing then system willl createt one
    but actually the price will get stored in the price oder history not exactly in the pir

  • Delivery proposal for free item

    Dear All,
    While creating sales order with free item the delivery proposal deactivated, how we can make it editble in case free items (in schedule lines)
    regards
    murthy

    Hello Murthy,
    Please check the delivery proposal setting for free item Sales Area.
    go to -- IMG>S&D>BF>Availability Check & TOR>Availability Check>ATP>Define Default Setting Check for Sales Area.
    i hope it may help ful to you.
    Regards,
    Srinivasa Rao.

  • Excise capture in import po for free item

    Dear Friends
    I am having an issue.
    I have created an import po for free item.
    As the item is free of cost,system will hide the conditions tab item details tab.
    But we are paying the all the duties like CVD,Import Duty ,cess etc for the free item.
    The item detail tab is hidden, I cannot enter the planned delivery costs for the item
    Please advise me how can I capture Excise Invoice for the free itme in import PO
    Thnks

    The only way to do it is to assign a small notional value (like 0.01 USD) to the item, so that the conditions tab does not disappear.
    The only problem will be that the GR/IR clearing account will have an open entry, which can be cleared via MR11 with minimum accounting impact.
    Regards,
    Aroop

  • Error during creation of info record for pipline material.(Urgent)

    Hi All,
    We are getting the following error during creation of Info record for pipeline material
    " Material XXXXX is not a pipline material"
    we have checked the material master  and found it is a pipeline material.
    Kindly advice on the same.
    Help in any form will be rewarded.
    Best Regards
    Arihanth

    Hi Arahanth,
       The steps u need to check are;
    1) The Material Type ( If standard then it is PIPE or if defined own Material Type check the settings once preferably in special material type a tick at pipeline mandatory)
    2) when u create the info record (ME11) ensure the info category is selected as pipeline.
    Hope its clear to u
    if solved do reward me points
    Regards
    Anil Thai

  • How do I opt-out of recieving email receipts for free items from the store?

    Hello,
    Currently, when I download free apps from the store I will eventually receive weekly receipts from e-mail. While useful on purchased items, I treat this as spam for free items.
    How do I opt-out of this for free items?

    I'm not aware of any setting to prevent the Apple's receipt to be sent.
    If you bought a mix of purchase item and free item, the will appears on the same receipt. Instead of considering them as spam, you can consider them as "a way to recall which apps you dowloaded in case something wrong happen".
    Personally, I have created a folder called "receipts" and simply send these mails to this folder.

  • Purchase Info Record for Frame work Order

    Hi Friends,
    Do we have Purchase info record for Frame work Order(FO) ?. If yes, Please tell me which info category should i need to select to create a Purchase Info Record.
    Thanks

    Hi
    Is that means, Framework  PO will also use the same standard Purchase info record ?
    Thanks

  • Two Purchase Info Records for Same Material & Plant Combination

    Hi,
    2 Purchase Info Records are there for Same Material & Plant for 2 Different Vendors & Net Price is maintained in both Info Records
    1. Material M1 - Plant 1000 - Vendor A - Net Price Rs.4
    2. Material M1 - Plant 2000 - Vendor B - Net Price Rs.3
    Vendor A is Regular Vendor
    (Tick as Regular Vendor is his Purchase Info Record)
    It is observed that Rs.3 is picked up for Costing Purposes
    Requirement is that - Net Price within Pur. Info Record of Regular Vendor i.e Rs. 4 must be picked up always for Costing Puposes.
    Is this possible???
    What Logic system uses while picking up the Price in case where there are 2 Pur. Info Records for same Material & Plant???
    Thanks & Regards...
    Ameya...

    Hi,
    1. Material M1 - Plant 1000 - Vendor A - Net Price Rs.4
    (Validity - 28.04.2008 To 31.12.2008)
    2. Material M1 - Plant 1000 - Vendor B - Net Price Rs.3
    (Validity - 01.01.08 To 31.12.2008)
    Thanks & Regards...
    Ameya...

Maybe you are looking for