Infoarea missing in query designer

Hi All,
We are using BI 7 analysis authourization, we had a request for one user to add one ods access, we have granted access to the user to ODS via RSA1. But issue is we are not able to see the infoarea and ods in query designer.
Is we need any authourization to use the ods in BEX analyser or any other things need to be followed
Regrads,
Anbu

Hi Anbu ,
For query we need to assign some roles .Sometime even if we are able to see an infoarea in RSA1 but not able to see the query
Check the role that query is having in RSA1->metadata repository
In BEX analyzer you can check roles assigned to that user .This will tell you which infoarea are accessible to the user .
You can also check in SU01 for roles of a specific user .
Ask your BASIS to check which roles are needed to be assigned by comparing roles of user who can see those infoarea and who cannot .
Hope this will help .
Regards,
Jaya Tiwari

Similar Messages

  • InfoObject missing in Query Designer

    Hi Expert,
              I created one DSO which contain contian InfoObject InfoA, InfoB and other fields . and i also create a query against this DSO. But in Query Designer, there is no InfoObject InfoA and InfoB. all other fields can be find in Query Designer! i feel confuse about this ?
             Anybody can give some advise about this?
       Thanks in advance.

    Hi Dragon
    1. Close query designer.
    2. Activate the DSO once again
    3. Re-open query designer
    Sometimes I also faced refresh issue. but the above steps resolved my problem
    Regards
    Anindya

  • Can't find the ODS in query designer

    Hi Gurus;
    I am using SAP_BW 30B. I just created an ODS but I can't find the ODS under the InfoArea menu in query designer. I am not sure if it is related but, I tried to check the box for BEx Reporting under ODS settings. When I save or activate the ODS again the check in the box disappears. I can view other ODSs that are previousy created and non of them have a check for BEx Reporting under settings.
    I tried to delete the entries in the ODS and try to check again but no difference.
    Need your help.
    Thanx a lot in advance;
    Duygu Sile

    HI,
    Select the option, Create new query when you create for the first time on the  ODS and after designing the query it will ask for the Infoprovider under which the query has to be saved,give the ODS name which you  have created.Later Your ODS will be visible while creating queries.
    Hope this helps..

  • BEx: In Query Design I can't EXPAND Dim to select Char (missing + sign)

    Hi,
    I am in BI 7, but created some queries in RRMX i.e. the 3.x query designer.
    I went back to create a new query and I see my InfoArea but no means to expand it to select a cube, missing + sign and I can't expand the InfoArea.
    When I managed to open one of the old queries, in the query design, I see my design but all the Dimensions are missing the + sign and I can't expand them to select characteristics;
    In the same token, I can't expand the KEY Figure tree to select key figures, etc.
    Any help?

    Hello Amanda,
        1) a   There is no such rule as when to use query designer or analyzer. Essentially creating a query is done in query designer only. The only thing when using analyser to open query designer is that you can directly go to that query and change it and run the same in the analyser(Excel). To change a query when you directly go to query designer, you need to open the query manually using the "open query" button and you cant execute the report in excel from there(only web). As you can see there is no real difference, in my personal experience using query designer and then running the query on the web is much faster than using the analyser. Also excel has a limit of 65536 rows after which you cant really display the result. There is no such limit in the web analyser.
            b) Report designer is just for creating reports that look good when they are printed basically. You can refer the following link for more info.[http://help.sap.com/saphelp_nw70/helpdata/en/43/5fc0680a876b7de10000000a422035/frameset.htm]
    2)      There may be a problem with maybe the patch level or something. No real idea why this is occuring. You can definitely open the report in excel using the BI7 analyser. Programs -> Business explorer ->Analyzer.
    Regards.

  • Infoarea not appearing in Query designer

    Hi - I have some cubes created under cross application components infoarea but the infoarea is not appearing in the query designer. I have to create reports on these. how can I see them in query designer?
    Thanks,
    Raj.

    Hello,
    Please check your role. You do not have the authorization for that infoarea.
    Hope it helps,
    Regards,
    Meric

  • Multiprovder objects missing in the Query Designer

    Hi,
    I have multiprovider based on 2 infosets ( as the reproting is based on master data) .
    Later on i have added couple of objects in master data and adjusted the infoset and activated it . The multiprovider also ajusted after adding the fields.
    I have activated the multiprovider which is successfully activated, but when i login to Query designer and try to create a query the news objects are missing from the query desinger where as in RSA1 for the Multiprovider it is displayed.. Kindly can anyone will help to resolve this.
    Thanks

    Hi Sathish,
    Thanks for the response..
    I have cehck the infoset invidually , the data dispalyed in both the infosets are according to my requreiment.
    When i was checking the multiprovider i did not get the fileds which i have added in the multiprovider , i went back to the structure to cross check, if found this difference for all the ojects when you right click it will display assign identification filed where as for the added obejct it is displaying Change RUN id option.. why this is happening...
    This is happen in test server after transprotation where as in dev it is fine and executing properly
    Thanks
    Edited by: Sony Kapse on Mar 1, 2009 12:45 PM

  • Unable to find my InfoArea in Query Designer

    Hi all,
    Iu2019ve created an InfoObjectCatalog, InfoArea, DSO and an InfoCube. The data source, transformation,DTPs are all active and the flat file is loaded into the cube. I've the data also in the cube. I want to create a query out this cube that I created. But when I open query designer and look for my info area, I donu2019t find it. I searched for Info Area in Find but it says u2018No objects foundu2019. I can't find any of the objects i.e. either the cube or the Info Area.
    My question is why canu2019t find any of the objects that I created inspite of all the objects being active? How do I locate my objects in Query Designer that I created in BI backend?
    Please advise.
    Thank you.
    TR.

    Hi,
    You need to create the Query first to Find the Info Area (relevant to that Query)
    You can search the Info Area Manually (if you dont have Query also) provided You need to say New at Query designer Standard Menu.
    Hope it helps

  • Query Designer, Execute fails with missing iView (Portal Runtime Error)

    Hi,
    I have followed all steps to integrate Sap NetWeaver 2004s BI into EP. Checks done so far indicate that all is well between the EP and BI.  From within the EP, I can execute the Bex Web Analyser iView and from there I can execute a query on the BI backend.  From the BI backend, executing the function module RSWR_RFC_SERVICE_TEST returns the 'BI test service' success message.  SSO is working fine as no user/passwords were prompted for. From the trace file, I can see no errors appear but I do see authentication success messages.  So far, so good
    But, when I execute a query from within the Query Designer, it calls the browser and then errors with the following error:
    <b><i>Portal Runtime Error
    An exception occurred while processing a request for :
    iView : N/A
    Component Name : N/A
    iView not found: pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex.
    Exception id: 10:06_03/03/06_0012_26285450
    See the details for the exception ID in the log file</i></b>
    Looking at the trace file, all it tells me is the same, that this iView is not found.
    If I logon to the portal and have a look at the iViews within the 'platform-add-ons/bi' folder, I can see the following 4 iViews:
    BEx Broadcaster (com.sap.ip.bi.bexbroadcaster)
    BEx Portfolio (com.sap.ip.bi.bexportfolio)
    BEx Web Analyser (com.sap.ip.bi.bexwebanalyzer)
    My Portfolio (com.sap.ip.bi.myportfolio)
    I cannot find the missing iView (com.sap.ip.bi.bex).
    Any ideas/suggestions would be appreciated.
    Thanks in advance.

    Hi Ashish,
    Thanks for the suggestions.  Here is what happened:
    1. I have run the deploy and change template again (BIPostInstall).  Step 10 failed but I am not too concerned as it does appear that SSO is working both directions.  Also, step 13 failed which is the 'Configure Repository Manager'.  The error I got here was USER_AUTH_FAILED: User account for logonid "" not found.  I am not sure where it is getting the blank userid from. 
    2. The 'com.sap.ip.bi.business_explorer_showcase' role suggestion looked very promising.   I found some doco on it and it does mention this role and when assigned, then you see the Business Explorer tab.  I assigned it to all users and to all groups.  When I went back into the portal, sure enough, the Business Explorer tab was visible.  From within there, I could run query which all worked fine.
    BUT, when executing a query from within the BEx Query Designer, I still got the same error:
    <i><b>Portal Runtime Error
    An exception occurred while processing a request for :
    iView : N/A
    Component Name : N/A
    iView not found: pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex.
    Exception id: 11:25_05/03/06_0003_26285450
    See the details for the exception ID in the log file</b></i>
    Do you know if this is an actual iView that should exist in the portal content ?  If you have this working, can you see this iView in the portal?
    3. I had a look at this note (872043) but I could not get the sap download manager to work to get the zip files attached to the note download.  If you have it still, could you email it to me ([email protected]) and I will try that. Did you apply the zip file?
    I can't find any further trace information on why this missing iView error is happening.  I've amended the severity level on the areas which a SAP note detailed but the only information I get is that a missing iView was called.
    Function module RSWR_RFC_SERVICE_TEST still works fine and I can execute a query from the Web BEx Analyser iView.
    I just can't execute a query from the BEx query designer due to the missing iView.
    I don't know whether it is a communication problem even though SSO both directions seem to work OR whether I do have some content missing from my portal. 
    Regards

  • Infoareas do not at Query Designer and Analyzer

    Dear frieds,
    We are do not see the infoareas at Query designer and analyzer ( BW Quality ), in DEV is all right, what's happening ?
    OBS: The user autority is equal in all clients.
    Thanks.
    Fabrício

    Hi,
    Are you not able to see any of the info areas or only some specific infoareas?
    Regards
    Akhan

  • Am not able  to find 0SCM infoarea in query designer

    I have installed business content  infoarea Supply Chain Management 0SCM
    cube Purchasing Data 0PUR_C01, and can see in  infoprovider
    I  am not able  to find 0SCM in query designer
    Regards,
    Vivek

    Did u install any standard queries for 0PUR_C01?
    If u have any existing queries on 0PUR_C01, then only u can see infoarea when u say 'OPEN' in QD..
    otherwise u have to start with 'Create New', then navigate infoarea in QD

  • G/L Account Numbers missing in the Query Designer

    Hi Experts
                   New G/L Account numbers are been added to some items like Rebates & Discounts. These G/L Account Numbers are been seen in the RSA1 and are not present in the Query Designer. So i want to know the procedure to update these G/L Account numbers in the Query Designer, Can you please help me.
    G/L Account Numbers in RSA1 = 718 and in Query Designer it is 661 so please guide me to update the rest of the G/L Account nos in the query designer.
    Thanking you
    Regards
    Mrudul.
    Edited by: Mrudul Naidu Cherukupalli on Feb 1, 2008 5:23 PM

    Yes, the problem is with the extractor
    It is not been enhanced because i am working on SAP BW 3.1C and its been implemented in 2004 and since then it is not been used properly.
    The Datasource is 0EC_PCA_3 (Enterprice Controlling line items).
    Yes i maximized to 1000 records per call and searched for the G/L Account E16411 which i cannot find in the cube.
    When i checked the results with R/3 i found the totals are doubled and when divided the Key figure Net of Credit and Debit by 2 i got the some results correctly(Sales Revenue, Sales Revenue of Exports and Sales Revenue of Domestic)
    I Checked the Service Marketplace and found the note which should be implemented to rectify the error of duplicating the records,
    Can you please help me to update the  G/L Accounts in the datasource.
    My Development System contains more then 2000 G/L accounts in the cube (query designer).
    Thanking you,
    Regards
    Mrudul.

  • Missing attribute in query designer

    Hi,
    I need some reasonable explanation for an odd behaviour. Here is the scenario: a multiprovider, say X, has an infobject with some attributes where two of them are navigational and authorization relevant, but not for multiprovider X which had their checking disabled on RSSM. In Query Designer a query built on infoprovider X does not show these attributes in the "Attritbutes tree" below the infobject unless an specific authorization be given to the query owner with value * for the authorization object. Where is the trick if multiprovider X is told not to check these authorization relevant attributes? On the other hand, authorization relevant infobjetcs shouldn't be a matter of data selection? Why are they sensitive in query designer if their check are disebled for that multiprovider?
    Does anyone know how to explain this?
    By the way, I'm using BW 3.5.
    Thanks,
    Fernando

    Hi, Troy
    Thanks a lot for your reply. I opened an OSS to SAP to answer why even the infoprovider having the object authorization unchecked, in design time with Query Designer the atribute was hidden. The consultant said that checking does matter only in runtime. In design time the user has to be fully authorized for the (authorization relevant) attribute to be seen, regardless whether the authorization object is or is not flagged on the infoprovider (transaction RSSM).
    Below is a reply from Erick from another BI forum for this same issue that solved my problem. It may be helpful to you too.
    "<i>Hi,
    I'm working on a BW 3.5 project and I've encountered the same issue.
    The issue occurs if :
    - an infoobject is authorisation relevant
    - this infoobject is attribute of a master data
    - the corresponding authorisation object is flagged in an infoprovider
    - role included this object restrict value
    Solution:
    you have to create a new authorisation object link to your infoobject.
    This new authorisation object has to flagged in NO infoprovider.
    Then create a role including this authorisation object and affect * as value.
    As a conclusion, you can build an additional role including each authorisation object (with *) linked to each infoobject authorisation relevant (which are master data atribute).
    Hope this help you,
    Regards,
    Erick</i>"

  • Missing data fields in Query designer

    Hi Guys,
    A query exists on an ODS. There are few characteristics and navigational attributes in the ODS. In Query designer, on the left hand side under Dimensions,
    i can see 'Data part' (for Data fields of ODS) and 'Key section' (for Key fields of ODS).
    All but 2 fields (One data field and one navigational attribute of the ODS) are seen under 'Dart part' of the query designer.
    Data field - Accounting Document number
    Navigational attribute - Actual Acquisition Fiscal Year
    What may the reason for those 2 fields not appearing.
    Any help is greatly appreciated.

    Hi,
    I executed a query on the ODS using LISTCUBE. To my surprise, i can find both 0AC_DOC_NO and ZACQ_YR here. If i can find both these in LISTCUBE, why don't i find the same in the query designer. Even though i built a new query on the ODS in the query designer, i still can't find them in the query designer.
    Thanks

  • Cube don't apper in the Query designer

    Hi all I have created one cube and i don't see that one in my query designer..am I missing something here...pls let me know..cube is active,,update rule is active also.
    thanks

    Hi Gandaki,
    You will not see the Cube in Open> Queries until you have created an query on this cube. In the Open dialog box, click on the New button and look for your cube in the InfoAreas.
    Hope this helps...

  • Error publishing Query designer report to Web

    Hi all,
    I am facing error after executing the query in query designer in BI 7. The query fails to open in web and points to standard url:
    http://portal-dmb.wdf.sap.corp:50100/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=EX4_TBW20&VARIABLE_SCREEN=X&DUMMY=7
    "Link appears broken"
    Initially I have configured the web connectivity using the How to guide and carried out config in SMICM as well as SICF (activating BW node). If I enter the url from SMICM manually in IE, it would prompt for user/password for BI server and successfully logs on.
    The issue only lies when publishing query from Query designer to web. Please advise if I have missed out some config here.
    Thanks.

    Hi,
    check this notes/links if you have done all steps:
    SAP NetWeaver 2004s: Setting Up BEx Web
    SAP Note Number: [917950|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_sys/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393137393530%7d]
    [Setting up BEx Web - Short Track|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00c4742a-3a4b-2b10-b4ae-b03d08bcde6e]
    BI 2004s: Checking Java Connections Web Application Designer
    SAP Note Number: [989525|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393839353235%7d]
    Regards
    Andreas

Maybe you are looking for

  • Tomcat : Hlow to run more than 1 instance of tomcat server on same machine?

    Hi, How to run more than 1 instance of tomcat server on the same machine. I use tomcat 5.5. ,updated port number for second instance and tried to run,it takes the same old port number .No batch file available with this version to update the home dire

  • How do i select a particular cell from a AbstractTableModel?

    I m using abstractTableModel to create my table. My table display 4 columns of different info, now i can capture my info from the other window and compare the value with my table but i don't know how to highlight/or select the particular rows in tabl

  • Import  data in excel to database table

    How to insert data from excel to database table ? any suggestion ?

  • PHP and Forms

    I'm just getting started using PHP and I was wondering if anyone is using PHP to control access to Forms? I found a good article at http://www.oracle.com/technology/pub/notes/technote_as_signoff.html that discusses using PHP to create a custom SSO lo

  • Want help on query .

    if i want to store 40000 characters what datatype would you suggest ?