Infopackage hierarchy selection from OLTP is not saved when transported

I have created an infopackage in Development that is pulling an available hierarchy. I then transported Infopackage to QA, but the Hierarchy, although is available from OLTP, is not selected in InfoPackage. I created a copy of InfoPackage in the QA system and selected available hierarchy. It allows me to select hierarchy, save and execute. The issue I have is I need to transport the InfoPackage, created in DEV to all QA and Production systems. The InfoPackage is not retaining available hierarchy when being transported.

Hi,
Usually infopackage will not be transported but created in QA and production systems. If the infopackage is transported to QA, the pushbutton in infopackage Hierarchies in OLTP will bring the hiearachies available in the QA R/3 system. Appropiate hierachy can be selected and the same infopackage can be saved.
Regards,
Dinesh D

Similar Messages

Edited photos from iphone 4s not saving when transferred to computer!!!

How come after I enhance my photos on my iphone4s and I transfer them to my computer, the changes don't save? Doesn't that defeat the purpose of editing them from your phone? Can this be fixed?

I am having the exact same problem. I am transferring photos via icloud to my windows 7 PC, some pictures I can rotate and others I can't. I get an error about file properties, even though the file properties are the same as the photos I can rotate. This is definitely some kind of bug.

Select * from tab is not working in oracle 10g

select * from tab is not working in oracle 10g. But at the same time,
select * from <<table>> is working.
Please advise me.

This works for me in 10.2.0.2
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL> select * from tab;
TNAME                          TABTYPE            CLUSTERID
LOAN_DETAIL                    TABLE
PLAN_TABLE                     TABLE
...

I receive the error "The Selected Color Format is not supported" when I try to scan from my HP Office Jet Pro 8610.

I receive the error "The Selected Color Format is not supported" when I try to scan from my HP Office Jet Pro 8610 using Adobe Acrobat Pro 11. I recently purchased the printer. I believe I ame using all of the defaults. How can I correct the problem?

Hi,
Both printer and computer seem to be on same network.
Please download and run the following utility to troubleshoot on the issue.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&jumpid=reg_r1002_usen_c-0...
Also download and install the firmware update from the link below.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-89897-4&cc=us&dlc=en&lc=en&...
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

In a adress board the website is not saving, when i clink on arrow in a panel board this is blank

In a adress board the website is not saving, when i clink on arrow in a panel board this is blank

The only difference I see between looking your site between Firefox and IE is that Firefox is slightly less tolerant of a narrower window than IE but I don't see parts
missing they may be covered up but that happens on both browsers where the picture overlays wording down left side.
I can't really tell whether you are saying Firefox or IE is missing parts, but they look the same to me. First time looked it like Firefox was missing portion but it was just dropped down for some distance text and pictures were not missing.

Why are calls from my favorites not ringing when my phone is silenced at night?

Why are calls from my favorites not ringing when my phone is silenced at night?

You Might Have scheduled do not diturb... Turn Of Scheduled button in settings>do not disturb>scheduled..

Hierarchy upload-InfoPackage-Hierarchy Selection tab

I have to upload hierarchy for Internal Order. I have InforPackage but on the Hierarchy Selection tab there is no hierarchy that I am supposed to upload (it's called A1). Do I have to extract the missing hierarchy from R/3? Can someone please provide the steps that should be taken?
It's very urgent as I have to finish it today (well, the deadline is the end of this weekend).
TIA,
A.

Hi Arek,
Is ur infosource is properly assigned to the Hierarchy Data source or not!!!!
If not then u need to check the proper data source(From R3) which needs to be used for ur loading.... based on that..
If the DS is available in R3 then replicate the same and assign to ur Infosource..and maintain the proper TS and TR accordingly with the Idocs transfer method..
once this is done then u can able to see the required hierarchy for ur purpose..
make sure that the Hierarchy is available from ur source system.. then only it will be available in the IP selection tab.
thanks
Hope this helps

Query.cmd -s -c -l "select * from ' cachename '" does not return results

We are working with coherence 3.6.1 on RH5 server. We are connecting to the grid and are able to query a cache through the command line. However, when we attempt to query a cache utilizing the following command, we receiving only the CohQL prompt:
query.cmd -s -c -l "select * from '<a cache>'"
This works on the UNIX side with the query.sh command.
Additionally:
redirect to a file = same issue
input from a file = same issues
input from a file, redirect to a file = same issue
etc....
The examples are OK, it just does not work as expected.
Thanks!!!

We have been able to get the file input to file output to work
query.cmd -s -t -f < myinputfile -f > myoutputfile
still cannont get the
query.cmd -l "select * from 'mycache'" to work

Attachment modifications not saving when routing document

The issue is that in some cases attachment file modification are not saved and forwarded to the next recipient when using the routing slip feature.
Here is the scenario:
A user sends an excel document as an attachment and routes to several users via the groupwise routing slip feature.
The normal and successful work flow is this:
Next user in the route recieve the email.
Opens the document (in excel) and makes some changes in the document.
They select save (not save as).
Then then click the "completed" check box to continue the routing.
The next user will receive the email and attachment and the changes will be included.
The issue is that in many cases (about 50% of the time) the attachement edits will not stick and are not included for the subsequent recipients.
I have done some experimentation and it appears to be related to how the groupwise client handles temporary files.
It looks like there are two different folders used - my documents\groupwise and user\local settings\temp\xpgrwise.
When it works it appears that "edits" are saved in the temporary files folder and then "re-attached" to the routed email.
And the temp files are deleted when the email is closed.
In the failed scenario the attachment file does not get deleted from the temporary folder (and edits are not forwarded).
It appears to me that there may be another "unknown" temp file folder someplace that is being referenced and causing the issue.
We are using groupwise 8 client by the way and I think the issue started after the version 8 upgrade.
Has anyone else experienced and/or resolved this.
Any help would be much appreciated.

jensenms,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Statistical Forecast not saved when generated with background planning job

Hello All,
The system I am working on is SCM 5.0 Support pack 15.
When I execute the planning job in the background to generate a statistical forecast, the job completes sucessfully, I have a spool that shows the forecast profile was executed (Auto Mod 2) with the appropriate model messages and the last two messages are 'Data saved successfully' and 'No data has been changed; data must not be saved', but when I go into interactive planning to view the forecast, there is no forecast in my key figure.
My planning area has the forecast settings maintained for Statistical Forecast, Corrected History, and Ex-Post Forecast key figures. My forecast profile is looking at the History key figure and Statistical Forecast key figure. My time series has been initialized for 36 months of History and 18 months of forecast. My planning book is set to have the Statistical Forecast Key figure as output only. My activity and planning job are set to execute in the appropriate planning book (in order to see the forecast alerts I have selected) with the specific selection profiles (no navigational attributes), and the aggregation level set (no navigational attributes).
The only way for me to see a forecast is to change the Statistical key figure setting in the planning book to output/input, execute the forecast job in the background, and then go into interactive planning. Am I missing something? Any help you could provide would be greatly appreciated.
Regards,
Roxane H.

Hello Senthilrajan,
I have executed the forecast in the foreground using the same planning book as the background job and same forecast profile (Auto Model 2)with a selection from the batch run (pulled a selection from the spool list) and it generated a forecast with the same messages as my background job except for the last two lines (Data saved successfully and No data has been changed, data must not be saved) that I was able to copy back into interactive planning. I then used this selection in the background job to execute the forecast in the background and did not see a forecast in interactive planning and received the same messages as before -
Data saved successfully
No data has been changed, data must not be saved
The reason we run the forecast in this book is to allow our Demand Planners to view the forecast alerts by book and/or selection directly in interactive planning instead of having to get their from the Alert Monitor. It has worked in the past and is currently working in the same environment just with a different planning book, selections, forecast profiles, and data. It generates a forecast with no 'No data has been changed, data must not be saved' message and the forecast is written in the key figure and is viewable in interactive planning with out manipulating the key figure to be input/output (it is set to output only).
Any further assistance you can provide would be greatly appreciated.

Books are not saved when created with iPhoto 09

When creating a book, everything is normal but the book is not saved in the computer. So I have to finish the project and order It. The name of the book is still listed on the left but there's no photos or text. I also have a book that seems corrupted because when i try to open the file iphoto jams and i'm not able to remove the corrupted book because the file can't be opened.
Please help me

Welcome to the Apple Discussions. Sounds like a damaged database file. Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the last three options.
Click to view full size
Also what system and iPhoto versions are you running?
Happy New Year

Preference are not saved when leaving Photoshop elements 10

Hi,
Each time I leave photoshop elements 10 (bought on Apple Store), A windows says that I don't have the required rights and my preference are not saved. Each time I restart the program it is re-installing the effect as if it's a new install.
Any change done in preference window is not taken into consideration.
I understood that this is because Photoshop is trying to save on root directory, which is not possible as protected.
Anyone has a solution as it makes it almost unusable :-( How can I change the right or tell photoshop to save the preference file somewhere else?
I use Mountain Lion.
Thanks

I do not need to install when I get from Apple Store. When I start for first time after downloading, photoshop starts first by creating content and effect window. After that the program works normally.
Except when I want to quit, another window open telling me that I don't have the users rights to save my preference.
If I restart again Photoshop it restart from scratch and tries to re-install content and effects, which should only done once.
My problem is that I bought the version 10 in february this year and I was not aware that a new version was coming, so I don't want toinvest another 69 Euros....I would at least have my version 10 working properly.

The titles are not saved when i quit

After quiting FCPX the titles i have made are not saved for next time i open a project.
Some titles are saved sometime?

Using FCP-X 10.01, OSX 10.7, 27" iMac 2010, 12 GB memory
I am having the same problem! I am using the Lower Thirds Gradient Edge title and I do change the font from Futura to Comic Sans and change the text size. The 58 large font I change to 55 and the 37 small font I cange to 45 (in case that makes a difference). I have used this for many titles in my project and some have the problem, others do not. It happens, as you say, when you exit the program and then re-launch.
Sometimes the titles go back to the template "Name", "Description", sometimes the title stays as written but the font goes back the generic Futura, and sometimes the font changes to a different one that is close on the font list to the "Comic Sans" that I am using! I did find that if I move the text boxes so that they have any overlap then the problem happens every time. However, I have been more careful with that recently and I am still getting the problem sometimes. Doesn't happen with every title which is what makes it more puzzling.
I have now taken to exporting a project file as soon as I have completed editing (I have 16 projects in the movie I am making) so that I don't lose what I have done!
Any ideas out there?

Error "document not saved" when want to save Word/Excel files on NAS server

Hello everybody!
I have a NAS server (QNAP storage).I want to have some folders with these permissions :
1.nobody can create or delete folders in first parent folders (blue folder and red folders )
2.everybody can create/save folders,docs... in it. (Black folders)
when I set permission like picture below,people can not save documents in Excel or Word format in folders ( I have this problem just for Word and Excel).they face with errors : document not saved / access denied,contact your administrator.
special permission for blue folder (domain users)
(include inheritable permission) and (replace all child subfolders...) are unchecked.
traverse / execute files
List folders/ read data
Read attribiutes
Read extended attribiutes
Read permission
special permission for red folder :
(include inheritable permission) and (replace all child subfolders...) are unchecked.
traverse / execute files
List folders/ read data
Read attribiutes
Read extended attribiutes
create files / write data
create folders / append data
write attributes
write extended attributes
delete subfolders
delete
Read permission
special permission for black folder :
these folders inherit permissions from parents.
(include inheritable permission is checked.
(replace all child subfolders...) is unchecked.
when I uncheck "delete" permission in red folders and save it,"modify" permission in main permission will uncheck,too.I dont know why?in this situation,people can save docs, but they can rename/delete folders,too ( I dont want they delete
or rename parent folders).
what I must do?
regards,
atiye moghaddam

Hi.
How are the rights configured to be inherited? Could you do a "icacls <folder>" on each level and post it back.
Also worth considering is that this is a Linux Samba system, so it might not work as a regular windows system.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. Even if you are not the author of a thread you can always help others by voting as Helpful. This can
be beneficial to other community members reading the thread.
Oscar Virot

FACT SHEET Configuration not saving in transport to move to QA system

hi Experts
I am setting up the Account Fact Sheet BP_ACCOUNT_FS for my users and the only configuration that is saving is the configuration of the layout of the fact sheet to a transport. The actual settings or configuration within the fact sheet is not saving. For example, I used a BI report and added my query and parameter and while this saves in our development box, this will not save in the transport to move up through the systems.
Any thoughts? I already have a message open with SAP but checking to see if anyone has an immediate solution.
Thanks,
Chris

Hi,
P-table is an time independent attribute table ie it contains all the attribute info. in that table. so when u added a characteristic to that infoobject, u can find that entry in the P-table.
Also M is a view on P & Q tables. It is not a table.
T- ie Text table will contain only short,medium and long texts related to that info object.
so when u add a characteristic to infoobject it will be refelcted in P-table or Q- only. Not in Text tables.
Narendra Reddy

Infopackage hierarchy selection from OLTP is not saved when transported

Similar Messages

Maybe you are looking for