Information on Management reporting (Record to Report, Purchase to Pay)

Hi Experts,
Can you please provide me the details on management reporting detail on the following business processes
Record to Report
Purchase to Pay
Plan & Make
Product Formulation
Order to Cash
I would like to know the data sources providing details on the above listed business processes.
Thanks for your help.

Hi Rachan:
as said by vishwanath, we cant give you particular info. If you can be specific on the report then we can throw light...
to let you start, you can visit the below link for P2P(procure to pay):
http://help.sap.com/saphelp_erp2005/helpdata/en/index_srmaddon.htm
In P2P, basically you get the data from SRM and R/3. you can get reports like  vendor evalualtions/shopping cart status/ Contracts/PO's etc. It more of a "how much you spend", where are you spending and who are the top vendors. Information like this can be obtained from P2P area (SRM).
Hope it helps
assign points if helpful
Kalyan

Similar Messages

  • Cash Management Report FF7B - drill-down from planning levels to AP/AR OIs

    Hi
    I'm configuring cash management and have created all planning levels and groups needed.
    All master data, ie GL accounts, vendors and customers, have the correct planning level or group.
    I've created all the groupings etc that I need.
    I'm running the reports FF7A and FF7B. I have two questions and problems.
    1. When running the Liquidity Forecsat for customers and vendors I drill-down to the standard PL or SL planning levels for AP and AR postings respectively. Then I drill into the planning groups correctly  (E1-E9 and R1-R8). But when I try to drill into the cash management detail records  (or is it the AP/AR line items?) I get "Memo Records: List - List Contains No Data". This happens every time. Should I now see the AP or AP line items? Or should I see some cash management memo records? I have deleted all the cash management data several times and recreated but I still get this problem  (using reports RFFDDL00 and RFFDKU00)
    When I do the same for purchase orders, purchase requisitions or sales orders I see a Memo Records List which agrees with the previous planning level total and I can then drill into the actiual POs, PRs or SOs from this list without an issue.
    2. When running the Cash Position and I do the drill-down to the GL Line Items, I get an enormous list which does not just show the total of items at the previous planning level. Why is this please? Example: a bank account with a balance of £2,000  (shown on the panning level) but with 000's of line items totalling say £5m. Again I have deleted the CM data and recreated but without any improvement to the problem.
    Any help anyone can give me with these issues will be very much appreciated.
    Thanks.
    Wayne

    Hi
    I have the same trouble with Tcode FF7B.  There´s a message "Memo Records: List - List Contains No Data"; bit in the TcodeFF7A, it runs OK.  The message appears just witn Tcode FF7A.
    Also, There´s all TR data in tables FDSB for GL accounts, FDSR and FDFIEP for customers/vendors.
    Can you help me??  can you solved this issue?
    Tanks for your Help

  • Report: Purchase Orders - Accounting and Payment

    Dear friends,
    Please may I would like to help with the following item: Precise get a report that will allow me to analyze the values registered, recorded and paid by an purchase orders order X (may be hundreds of orders)
    Expressed another way, I would be able to list the payment orders for any one month. Ex: Payments made to purchases orders for the month of March 08
    Graphically
    Purchase Order - Income of Merchandise - Accounting - Payments
    There are some reports that help me to integrate this information?, (Or even allow me to download data and work with ACL), the objective is to analyze the values paid and recorded by an purchase order X (may be hundreds of orders)
    Thank you in advance, I will be attentive to their comments

    Hi ,
    The type of report you are trying to view is like procure to pay report .
    You can use the following tables for this purpose .
    EKKO , EKPO , EKCH , MSEG , BKPF , BSIK , BSAK , PAYR , REGUP - REGUH .
    Kindly expore these tables and you will get an idea as to how to make the joins to suffice your requirments .
    Hope this helps .
    Regards ,
    Dewang T

  • Network DR test causes Exchange DAG network to fail (Failover Cluster Manager reports comms errors)

    We have a DAG configured between 2 mailbox servers, one in each of our main data centres. Our comms team recently performed a DR test between our 2 data centres, switiching from the main production link to the backup link. During this outage the Failover
    Cluster Manager reported errors, with each mailbox server reporting the other as uncontactable. The Events that were logged include the following:
    Isatap interface isatap.{02ADE20A-D5D4-437F-AD00-E6601F7E7A9D} is no longer active. (EventID 4201)
    Cluster node 'MAILBOX_SERVER' was removed from the active failover cluster membership. The Cluster service on this node may have stopped. This could also be due to the node having lost communication with other active nodes in the failover cluster. Run the
    Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapters on this node. Also check for failures in any other network components to which the node is
    connected such as hubs, switches, or bridges. (EventID 1135)
    File share witness resource 'File Share Witness (\\WITNESS_SERVER\SHARE_NAME)' failed to arbitrate for the file share '\\WITNESS_SERVER\SHARE_NAME'. Please ensure that file share '\\WITNESS_SERVER\SHARE_NAME' exists and is accessible by the cluster. (EventID
    1564)
    Cluster resource 'File Share Witness (\\\WITNESS_SERVER\SHARE_NAME)' in clustered service or application 'Cluster Group' failed. (EventID 1069)
    The Cluster service is shutting down because quorum was lost. This could be due to the loss of network connectivity between some or all nodes in the cluster, or a failover of the witness disk. Run the Validate a Configuration wizard to check your network
    configuration. If the condition persists, check for hardware or software errors related to the network adapter. Also check for failures in any other network components to which the node is connected such as hubs, switches, or bridges. (EventID 1177)
    The Cluster Service service terminated with service-specific error A quorum of cluster nodes was not present to form a cluster. (EventID 7024)
    The Microsoft Exchange Information Store service terminated unexpectedly.  It has done this 1 time(s).  The following corrective action will be taken in 5000 milliseconds: Restart the service. (EventID 7031)
    Looking at the Cluster Events in the Failover Cluster Manager Snap-In i see a heap of Event ID 47 (cannot activate the DAG databases as the server is not up according to Windows Failover Cluster Service) and:
    Node status could not be recorded. This could prevent some network failure logic from functioning correctly. NodeStatus:IsHealthy=True,HasADAccess=True,ClusterErrorOverrideFalse,LastUpdate=5/2/2011 8:25:42 AMUTC Failure:An Active Manager operation failed.
    Error: An error occurred while attempting a cluster operation. Error: Cluster API '"ClusterRegSetValue() failed with 0x6be. Error: The remote procedure call failed"' failed.. (EventID 184)
    Forcefully dismounting all the locally mounted databases on server 'BACKUP_MAILBOX_SERVER. (EventID 307).
    Our Comms team doesn't believe it is a comms issue as they did not log any network communication errors between the servers in the two sites (using icmp). So if it is not a comms issue, how can I configure the Failover Cluster Manager to be resilient to
    this type of network failover event.
    Thanks
    Dan

    Isn't it also true that in a stretched DAG with even numbered nodes, the PAM needs to be in the same site as the active DAG node?  If the connection between both nodes goes down, and the PAM is in the "passive" site, the primary node will
    dismount the databases since it can't check with the PAM to make sure its safe for it to be up.  
    In a even-numbered node stretched DAG, the PAM changes to the DR/passive site everytime a failover occurs, but doesn't automatically switch back when you reactivate the primary node.

  • #550 5.2.0 STOREDRV.Deliver: The Microsoft Exchange Information Store service reported an error.

    Hi, 
    I created a mailbox few days before, everythign was working fine and suddenly when some one tried to send email on that mailbox it bounced back with following error:
    There's a problem with the recipient's mailbox. Microsoft Exchange will not try to redeliver this message for you. Please try resending this message, or provide the following diagnostic text to your system administrator.
    Sent by Microsoft Exchange Server 2007 
    Diagnostic information for administrators:
    Generating server: Mail01.abc.com
    [email protected]
    #550 5.2.0 STOREDRV.Deliver: The Microsoft Exchange Information Store service reported an error. The following information should help identify the cause of this error: "MapiExceptionNotFound:16.18969:9A000000, 17.27161:00000000CC000000000000000600000000000000,
    255.23226:00000000, 255.27962:FE000000, 255.17082:0F010480, 0.26937:94000000, 4.21921:0F010480, 255.27962:FA000000, 255.1494:00000000, 255.26426:FE000000, 4.7588:0F010480, 4.6564:0F010480, 2.17597:00000000, 2.25805:00000000, 4.8936:0F010480, 4.14312:0F010480,
    4.2199:0F010480, 2.25805:00000000, 4.8936:0F010480, 2.22957:00000000, 2.19693:00000000, 2.17917:00000000, 2.27341:00000000, 4.8936:0F010480, 4.17097:0F010480, 4.8620:0F010480, 255.1750:0F010480, 0.26849:0F010480, 255.21817:0F010480, 0.26297:0F010480, 4.16585:0F010480,
    0.32441:0F010480, 4.1706:0F010480, 0.24761:0F010480, 4.20665:0F010480, 0.25785:EC030000, 4.29881:0F010480". ##
    Original message headers:
    Received: from Mailbox.abc.com ([fe80::892d:93d6:b1ac:b70a]) by mail01
     ([10.72.0.95]) with mapi; Fri, 11 Jan 2013 14:04:55 +0500
    Content-Type: application/ms-tnef; name="winmail.dat"
    Content-Transfer-Encoding: binary
    From: Anwar Amjad <[email protected]>
    To: All-HEC <[email protected]>
    Date: Fri, 11 Jan 2013 14:04:53 +0500
    Subject: FW: Suggestions & New Arrival in HEC Library
    Thread-Topic: Suggestions & New Arrival in HEC Library
    Thread-Index: Ac3vHgwR50OLs2BnQuOzo9jWg4e1gQAvJtUw
    Message-ID: <[email protected]>
    References: <[email protected]>
    In-Reply-To: <[email protected]>
    Accept-Language: en-US
    Content-Language: en-US
    X-MS-Has-Attach: yes
    X-MS-TNEF-Correlator: <[email protected]>
    MIME-Version: 1.0
    X-Auto-Response-Suppress: DR, OOF, AutoReply
    After this error, i treid to send email again and there is no error and email was delivered. What was the cause of this error?
    Hasan

    Hi,
    I tried to start seeding again but it is at same status. I will try again and hopefully it will get resolved.
    But, yesterday i ran in to the most complex issue i have ever seen with Exchange.
    There was a unexpected power cut at our datacentre due to which both the nodes went down.
    After that both the nodes came up. But the all 3 databases were dismounted.
    Therefore, i ran Eseutil /mh resulting dirty shutdown.
    I was able to repair 2 databases.
    But the 3rd one was not mounting with below error.
    Microsoft Exchange Error
    Failed to mount database 'Mailbox Database'.
    Mailbox Database
    Failed
    Error:
    Exchange is unable to mount the database that you specified. Specified database: XXXXX\First Storage Group\Mailbox Database; Error code: MapiExceptionJetErrorAttachedDatabaseMismatch: Unable to mount database. (hr=0x80004005, ec=-1216).
    I was able to mount database somehow. There are 7 User mailboxes (Tier 1) on this database.
    All emails sent to the users in this database are bouncing back with the below error.
    This storage groups holds the mailboxes of my Senior Managements. And their mailboxes are down for almost 20 Hrs. I am spinning my head since yesterday but not able to find any fix. Can you please guide me in this concern.
    Best Regards
    K2
    Kapil Kashyap

  • Batch Management report Issue.

    Hi Friends,
    I have a question on batch management report, for detailed information please see the steps below
    Step 1 : I have material X and Y created with class u2018XYZu2019, and characteristic value temperature 10 u2013 100 c
    Step 2 : I have done Goods receipt for both the material
    Material document     Material     Batch Number     Characteristic Value
    123          X     TEMP1          10 C
    124          X     TEMP2          10 C
    125          Y     TEMP3          10 C
    126          X     TEMP4          20 C
    127          Y     TEMP5          20 C
    I have two questions now?
    1.     Is there any report to find out the list of materials with characteristic value 10 C?
    2.     is there any report to find out list of batches for 10 C?
    Thanks and Regards,
    Chalaa

    There is no standard report for your requiremet, go for ABAP development.

  • Management report - Role analysis

    Hi guys,
    So here's my issue, I inadvertently scheduled a role analysis without specifying the project roles which are about 200 +.  Thus, role analysis under the management report view constantly shows the  results of the analysis of about 2000 + roles which is a combination of both SAP delivered roles and project roles. Every subsequent batch and full syncs I've scheduled seemingly gets aggregated with the initial sync which has all the SAP delivered roles.
    Question.
    1. I understand I have to purge the database at the backend. The basis team strongly advices against this. Can I possibly purge the role analysis in the CC front end? What are my options here? I only want to see the role analysis of our 200 + project developed roles.

    Dear Adewale,
    I understand your requirement, please check the following.
    There are two ways to see Role based Risk Analysis, and both depends upon your requirements.
    1) Suppose, You have a requirement to see consolidated Role based Risk Analysis of a particular system. That means you want to generate a report for all the roles and want to see which roles are violating, mitigated, critical, high, medium and low in your system. For this you can go to Informer tab and generate Role based Risk Analysis Report.
    In this report the advantage is that you get a pie chart and bar graph. But you can not generate reports on the basis of some particular roles, because there is no such functionality provided in CC 5.2
    2) In other case if you wish to generate a Role based Risk Analysis report by specifying a condition like (z*), Here you also have option to select Report Type, risk Level etc  but yes, there is no functionality to see the result in graphs or charts in CC 5.2
    So in both ways your requirement to generate project roles risk analysis report in graph format can not be achieved. For this you only have two options.
    1. Raise an enhancement request to SAP Support.
    2. To go with the second option mentioned above, select report type to be management summary and export the results to excel and generate graphs manually.
    I understand this is painful.
    Best Regards,
    Amol Bharti

  • CC 5.1:Incorrect Management Report

    Hi All,
    I have the following 2 queries:
    1. I have created one user 2 days  ago in production system 
       and assigned SAP_ALL profile. There are 2 background
       jobs scheduled to run daily and those are:
        1.User/Role/Profile Synchronization (Incremental)
        2.User/Role/Profile/Critical Actions Batch Risk Analysis
           (Incremental) with Management Report option selected
       I have been monitoring these jobs daily and these job are running fine and are in Ready status.
    However much to my surprise, the number of violations have not been increased inspite of assigning SAP_ALL profile! Earlier, when I assigned SAP_ALL profile to any user on temporary basis, CC immediately increased the number of SOD violations to 2 or 3 times what already is available.
    FYI: when I am doing user analysis from Informer Tab,
    the user Id what I have created is properly shown. If I
    select "Critical Roles/Profiles" as  Report Type, its showing
    that this user is assigned SAP_ALL profile.However what
    I expect is that SOD violations should also increase in
    Informer Tab. Otherwise, the results shown by CC are not
    reliable.
    Kindly suggest me any work arounds.
    2.When we run these reports, in Informer tab, CC shows all
        SOD violations based upon certain criterion. But my
        question is: Is there any way by which we can determine
        like what changes have been made to what objects (Users
        Roles or Profles) during a particular period of time, lets
        say during last two days?
    Hope somebody would answer or suggest!
    Thanks and Regards,
    Faisal

    Is SAP_ALL set as a critical role/profile and if so are you deliberately excluding critical roles/profiles from standard reports via configuration?

  • Management Reporter CU11 Timing Out

    Morning All,
    I use SQL 2012 and I installed Management reporter CU11, but I keep getting this error message after installing management reporter CU11;
    Tasks.RecordException] Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. Stack trace: Inner Exception: [System.ServiceModel.FaultException`1[Microsoft.Dynamics.Performance.Reporting.Common.Service.ServiceFault]]
    Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. Stack trace: at Microsoft.Dynamics.Performance.Reporting.Common.Service.ServiceBase.HandleException(Exception exceptionToHandle, ReportingException
    exceptionToThrow, Boolean logError) at Microsoft.Dynamics.Performance.Reporting.Common.Service.ServiceBase.BaseExecute[TResult](Func`1 executor) at Microsoft.Dynamics.Performance.Integration.Reporting.Adapter.CompanyProvider.InsertCompany(IntegratedCompany
    item) at Microsoft.Dynamics.Performance.Integration.Reporting.Adapter.CompanyProvider.WriteObject(Object value) at Microsoft.Dynamics.Integration.Service.Tasks.RecordWork.DoRecordWork(DbMap map, Object key, OperationType operationType, String loggingSourceName)
    User: XXX\administrator Machine: 

    Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription.  This is only one forum among the many
    that are on the TechNet Discussion Forums, and given your post, you likely chose the wrong forum.  This is a standard response I’ve written up in advance to help many people (thousands, really.) who post their question in this forum in error, but please
    don’t ignore it.  The links I share below I’ve collected to help you get right where you need to go with your issue.
    For technical issues with Microsoft products that you would run into as an
    end user of those products, one great source of info and help is
    http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
    http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
    For Technical issues with Microsoft products that you might have as an
    IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
    http://social.technet.microsoft.com/forums/en-us, and search for your product name.
    For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
    http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
    If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
    http://community.dynamics.com/
    If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize!  Please repost your question to the discussion forum and include much more
    detail about your problem, that could include screenshots of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing. 
    If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you!  It’s called the Where is the forum for…?
    forum and it’s here: http://social.msdn.microsoft.com/forums/en-us/whatforum/
    Moving to off topic. 
    Thanks
    MSDN and TechNet Subscriptions Support
    Did Microsoft call you out of the blue about your computer?
    No, they didn't.

  • The migrated Crystal Report throws "The database logon information for this report is either incomplete or incorrect" error

    [ENVIRONMENT]
    Product version - BI4.1 SP03
    OS - Windows 2008 R2
    CMS Database - Oracle 11g
    Java Application Server - Tomcat7
    [ISSUE]
    Using the Upgrade Management Tool to completely migrate a BOXI3.1 SP3+FP3.6 to BI4.1 SP03.  The reporting database from both BOXI3.1 and BI4.1 are the same and so is the database logon credential.
    When viewing and refresh a migrated Crystal Report, it throws "The viewer could not process an event. The database logon information for this report is either incomplete or incorrect. [] ---- Error code:0 [CRWEB00000119]" error in both BI Launchpad and "The database logon information for this report is either incomplete or incorrect" in scheduled job.
    [STEPS TAKEN]
    - Update the Database Configuration with the SAME Oracle database password in CMC and "The database logon information for this report is either incomplete or incorrect" issue goes away.
    I search the SAP SMP and SCN forum and found no reference on this UMT and Crystal Report database logon problem.  Hope any of you have seen this problem and share if there is an ADAPT for it.
    Thank you in advance,
    Jin-Chong

    Hi,
    The BI4.1 SP03 server and client and Crystal Report 2013 SP03 developer and Crystal Report for Enterprise 4.1 SP03 are all installed onto this Windows 2008 R2 server.
    I am able to open the migrated report from CMS repository in Crystal Report 2013 SP03 developer and am able to refresh it with database logon password provided.  After save it back to the Enterprise, the database logon password field for this report in CMC becomes empty so that I have to enter the database password and choose "Use same database logon as when report is run" when viewing and scheduling report.
    What is interesting to me is that the UMT seems to migrate the report along the database logon password because I can see the encrypted password in the report database logon property in CMC.  The workaround is to reenter the database logon password in the report database logon property in CMC.
    With this said, there are hundreds of the Crystal reports and the workaround would consume lots of manual work by update each report's database logon password in CMC.
    For other customers who have more crystal reports, I wonder if there is an automated way to update the crystal report's database logon password on BI4.1 or if this is an isolated incident on my new BI4.1 SP03 environment.
    I run UMT in command line to perform livetolive migration, and my steps are listed below
    cd "E:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\java\apps\upgradeManagementTool\jars\"
    "E:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win64_x64\sapjvm\bin\javaw.exe" -Xmx56g -Djava.library.path="..\..\..\..\win64_x64" -jar upgrademanagementtool.jar -internal_use_only_noversioncheck -responsefile LIVETOLIVEResponseFile.txt
    LIVETOLIVEResponseFile.txt:
    mode=livetolive
    source=edhc01nwapp65:6400
    sourceusername=Administrator
    sourcepassword=xxxxxxxxxx
    destination=WAPP246N:6400
    destinationusername=Administrator
    destinationpassword=xxxxxxxxxx
    logfile=E:\temp\livetolive.csv
    configparam:base_url=https://boprod.bsc.bscal.com/dswsbobje
    locale=en_US
    Regards,
    Jin-Chong

  • BADI for SAP Claims Management Reporting

    Does anyone has information in regards to the 2 BADI´s for SAP Claim Management Reporting.
    - Business Add-In: Data Change in 'Claim Overview' Report
      CLAIM_REPORT_ADD_1
    - Business Add-In: Data Change in 'Claim Hierarchy' Report
      CLAIM_REPORT_ADD_2
    How to implement and what benefits do these BADI´s provide ?
    Thanks

    Hi,
    This is what the documentation for the BADI says,
    1) Business Add-In: Data Change in 'Claim Overview' Report - CLAIM_REPORT_ADD_1
    Use
    With this enhancement you can change data in the claim report 'Claim Overview'.
    Do not change the key QMNUM in the transfer table pt_qmel.
    Requirements
    If you want to display more columns than those stipulated by SAP in the standard system in structure RCLAIM001 you must first add these additional columns to the structure RCLAIM001.
    2) Business Add-In: Data Change in 'Claim Hierarchy' Report - CLAIM_REPORT_ADD_2
    Use
    With this enhancement you can change data for the claim report 'Claim Hierarchy'.
    Do not change the key fields QMNUM, MANUM and OBJNR in the transfer table pt_qmel.
    Requirements
    If you want to display more columns than those stipulated by SAP in the standard system in structure RCLAIM002 you must first add these additional columns to the structure RCLAIM002.
    It would be better if you could get in touch with your ABAP guys to know about how to implement these BADI's
    Regards,
    Gokul

  • Release Management & Reporting

    In looking at the reports provided in TFS, I’m having trouble finding anything Release Management specific. It would be helpful for our auditors if I could provide reports based on the data shown in the Release Manager client. For example, the Releases tab
    shows the list of releases based on the filter applied, with information on the release template used, which build is being deployed, the stage, who created it and on what date it was released. Does anyone know of the reports available in TFS for Release Management,
    or will I need to build my own.
    Thanks!

    Hi Mike,
    Thanks for your post.
    As far as I know current TFS Server Report not support such Release Management reports. 
    For this scenario, please submit it to User Voice site at:
    http://visualstudio.uservoice.com/forums/121579-visual-studio. Microsoft engineers will evaluate them seriously.  
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Dispute management reporting

    Hi all,
    i'm doing some research into the disputes management module for my company who wish to use it to manage around 7500 claims per month.
    I'm trying to identify what the reporting is like from SAP, but i cant see any standard reports for disputes management, only comments to say that the data is extracted to BI as standard.
    Is there no dispute management reporting directly out of SAP (ECC6)?  Alternatively does anyone have experience writing reports in SAP for disputes management cases?
    Thanks
    Phil

    The main area for dsipute management reporting is within the BI module.
    That is not to say there are not standard ERP reports - however they are very basic.
    The main report can be run by user, customer, reason code and status with drill down functionality into the dispute.
    The volume of disputes would mean you would ideally be suited to BI, as you would want summary reports.
    There is standard BI Business Content - but normally a client would enhance this to bring in billing and accounting information.

  • Management Reporting using HFM

    Hi,
    I'm having a bit challenge here with my client who wants to apply management reporting with HFM. The MR according to them is an information that can help you determine their production, such: how much is the quantity of raw material used every month, per kg or per ton.
    As in my opinion, HFM doesn't build to accommodate such information, because in HFM everything should be defined with value of money (currency) and not with kg or ton or piece. I know well that Essbase would be the appropriate application for this.
    Is there anyone who experience the same situation and got this resolved ? Need your opinion.
    Thanks,
    anna

    Hi Anna,
    Whatever the type of the account, you have to write the rule, or it will translate using the default rates, which are defined in the application settings. Specifically accounts of type BALANCE (ASSET, LIABILITY) will be translated by the system using the rate defined in DefaultRateForBalanceAccounts. Accounts of type FLOW (REVENUE, EXPENSE) will translate using the rate defined in DefaultRateForFlowAccounts. So, if you do not want to translate at all you have to use the code I posted to override default translation, for every account you don't want to translate. Of course the same account will also consolidate provided that you have set the metadata attribute IsConsolidated correctly. And at the group level you will get the total Weight or total number of items or total headcount, whatever you have specified for the account.
    Regards,
    - Kostas

  • Remote Management Report

    How long does it take for entries to be made in database for Remote
    Control sessions.
    My boss is real interested in the Remote Management Report but it doesn't
    appear to update very quickly. I have run the report today after remote
    controling several pc's and nothing shows up on the report.
    Also if you use a tool like Zen workstation Browser 4.0 should those
    entries show up in the report. Doesn't appear to be ?

    the information is gathered when you do an inventory scan
    Shaun Pond

Maybe you are looking for