Information regarding BI Cube

Hi Experts,
I need some information about:
We already configured SEM BCS 6.0, in this we use source data basis from bw 3.5 cube (XFIGL_C10).
Now BI upgrading source cube from 3.5 version to 7.0, for this any effect occur in BCS.
Thanks & Regards
Madhu

Hi Dan Sullivan,
Thank you very much for your speedy response.
In my project COI not configured. So I think no need to change in BCS Configuration
Thanks & Regards
Madhu

Similar Messages

Regarding BW cubes for CS (Customer Service) module

Hi Experts,
I need information regarding
BW CUBES, REPORTS AND DATASOURCE
for Customer Service(CS) module.
Thanks in Advance
HR

Cubes :
http://help.sap.com/saphelp_nw70/helpdata/en/b8/d50c3c99d56448e10000000a114084/content.htm
Reports :
http://help.sap.com/saphelp_nw70/helpdata/en/b5/81073c61563259e10000000a114084/content.htm
Datasource :
http://help.sap.com/saphelp_nw70/helpdata/en/08/d60c3c99d56448e10000000a114084/content.htm

Sales Order - Line Level Information in Info cube

Hi BW Guru's,
We are using the following scenario: -
Info cube = Sales Order Line level information (yes, we want to capture the product level sales order information in info cube for our internal reporting purpose)
ODS = NO. we are not using the same
Info Source Same as data source (standard one)
Data Source 2LIS_11_VAITM (standard business content data source for sales order information)
Delta in above data source = contract related information (5 extra fields) working fine added as append structure in the data source
Extractor = Standard using SBIW - Perform setup - SD Sales Order (SD 11)
Number of Sales order line records / month = 80,000
Historical Sales order data to be uploaded = 1 year = 80,000 * 12 = Nearly 1 Million records
Hardware Configuration = 4 * 750 MHZ, 8 GB RAM
Please advice on the following things: -
1) How long it will take to upload 1 million records in BW?
2) Does our server capacity sufficient enough to take 1 million load?
3) Which delta procedure should we follow for day to day Sales Order line level data updation? Please advice on data selection procedure.
4) In case, last month Sales Order is changed, how to reflect the same in our info cube? Please suggest the suitable method.
Waiting for your reply.
Thanks
Rajiv

Hi Rajiv,
1) How long it will take to upload 1 million records in BW?
This depends on your network, on the width of your data record, the performance of your machine, on the settings for communication between BW and R/3 ....
It can be done in 2 hours, in 3 hours, it can take a whole day. There is no exact answer possible.
2) Does our server capacity sufficient enough to take 1 million load?
If your disc space is enough, no problem. If you already loaded your master data, there is not too much space necessary to load the transactional data.
3) Which delta procedure should we follow for day to day Sales Order line level data updation? Please advice on data selection procedure.
Just run your initial setup and initialize your delta. Run a daily delta package (this is what most companies do).
4) In case, last month Sales Order is changed, how to reflect the same in our info cube? Please suggest the suitable method.
The extractor takes care about this, just post the delta to your cube, that's it.
Hope this helps,
regards
Siggi

HT1677 In safari browser cookies is working fine. But when I add the browser url to the screen then the cookies concept is not working. In safari setting cookies is always open only. Can you please provide any information regarding to this?

In safari browser cookies is working fine. But when I add the browser url to the screen then the cookies concept is not working. In safari setting cookies is always open only. Can you please provide any information regarding to this?

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

Where to find the information regarding relationships between the tables?

I am developing a Windows based app which among other things lets users view SAP table schema and relationships.
If I use SAP GUI and dig up a bit on say the MARA table I can see that
Material Master (MARA) is related with
1) MaterialDescription (MAKT) on columns MANDT and MATNR
2) MaterialPlantData (MARC) on columns MANDT and MATNR
and so on
My question is - in which table the information regarding relationships between the tables is stored? There must be a data dictionary table which would be storing the relationships data. Which is it? Note: I will programatically access the table, NOT from the UI.

Thanks a lot...
I am still working on it, but here are the current findings. DD05S, DD08L and DD08T: The schemas for these tables were very promising for the thing I was looking for. Unfortunately the data within dose not seem to serve my exact purpose.
I found another one DD26S, which has almost 90% of the relationships I wish to explore. Do you know what is it supposed to contain?
Thanks a lot for your help.
Message was edited by: Salil Khedkar

I Need Information Regarding File Upload?

Where can I get information regarding the File uploading packages in Portal. Is there a specification I can get a hold of. I know such a package exists, as it is used by portal itself. I just need to know where I can get hold of information as to what it is called and how to invoke it.

Suraj,
The APIs to do file upload are not public as of yet. We are looking into the feature right now. Currently, the only supported method of file upload is using the Web Interface.
You may find more information about this in the 9iAs Portal forum
Sue

I need information regarding the creation of Workbook and WAD.

Hi,
I need information regarding the How to create the Workbook and WAD.
Can any one help me to get the information..
Regards,
Suman
Edited by: Suman Reddy Vuyyuru on May 19, 2009 8:22 AM

Hi,
for workbook:
[Queries in Workbook|http://help.sap.com/saphelp_sem40bw/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm]
for WAD:
[WAD for Beginners|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22]
thnks.

Hi any body have information regarding up gradation of BW-BPS to BI-IP

Hi any body have information regarding up gradation of BW-BPS to BI-IP, i need the procedure how to upgrade if any body explain thank full.......
Vinay
Edited by: vinay kumar on Aug 13, 2008 8:26 AM

Hi,
You can use BPS and Implement IP parallely so you can use both the tools simultaniously.
Even all the BPS variables can be used in IP.
Need to build all the data flow from the scratch.
Need to understand what stands for what comparing BPS and IP.
Instead of Function Module based on ABAP in BPS we have Function Types based on ABAP OO concept.
Regards,
Raj

Can I get information regarding the client browser using JSP

can I get information regarding the client browser using JSP. like.. name, screen resolutions, font type, screen width and height of the browser etc.,
if possible then please give me the samples..
thanks,

can I get information regarding the client browser using JSP. like.. name, screen resolutions, font type, screen width and height of the browser etc.,
if possible then please give me the samples..
thanks,

Need Information Regarding Rollout Project In Netweaver Portal

Hi,
Can anybody give me some information regarding how to rollout a project in Netweaver Portal or what exactly a rollout project is ?
If we are using Webdynpro for developing UIs , then what needs to be done on the Webdynpro side for doing the rollout .
I have been searching sdn regarding this but could not get any useful information .
Thanks a lot .

Hello Vijay,
<a href="http://www.sap.com/services/education/consultant/solutionacademy/index.epx">Here</a> you can find an overview of the different consultant training.
You have a track for Portal (<a href="https://websmp204.sap-ag.de/sapidp/011000358700003602072006E">link</a>) and also one for KM (<a href="https://websmp207.sap-ag.de/sapidp/011000358700003602162006E">link</a>).
Both can be done in a "technical" and a "development" flavor.
Regards,
Christophe

Need information regarding Solaris kernel Delayed write operation

Hello Friends,
I need information regarding the delayed write operation in Solaris.
Would be thankful if anyone can give me some details.
Thanks in advance

1) When you post code, please use[code] and [/code] tags as described in Formatting tips on the message entry page. It makes it much easier to read.
2) Don't just post a huge pile of code and ask, "How do I make this work?" Ask a specific question, and post just enough code to demonstrate the problem you're having.
3) Don't just write a huge pile of code and then test it. Write a tiny piece, test it. Then write the piece that will work with or use the first piece. Test that by itself--without the first piece. Then put the two together and test that. Only move on to the next step after the current step produces the correct results. Continue this process until you have a complete, working program.

Black out on information regarding artwork

I have seen a number of threads on the issue of artwork suddenly not sticking to iTunes files, unless it is artwork that can automatically be found online through the get artwork function. In all the threads there are many people complaining that they can no longer attach artwork to files and none of the threads ends in resolve or answers, or even with information that confirms that this is simply the way it is going to be on 7.7.1 iTunes. Is this a blackout of information intentionally because iTunes has no intention of fixing this "problem". I've found that iTunes forums on Apple Discussions are always the forums that lack the successful answers, dialogue and information that the other forums so regularly provide. Honesty and some answers would be appreciated.

Good Morning James.
I also see people posting on this topic. But a Black Out? No. I don't think there is some big plot to 'hide' information regarding this issue. Considering that there could always be any number of reasons that someone is having problems with their iTunes artwork. 7.7.1 glitches (yes, I said that first), user error, copyright issues, whatever. There are so many variables that I don't think there is one answer that 'fixes it' and it's just being kept a big secret.
As far as the forums here in the Discussion Boards go, and your mention of the "lack the successful answers, dialogue and information that the other forums so regularly provide"....
I just don't see it. Really. Being that this is a user to user board (regardless of who may or may not peek in here), why you would expect that 'they' (that would be users, just like yourself) would have the answers to everything, when you don't, is kind of... well, I'll assume is coming from a place of total frustration. And to imply that "honesty and answers" aren't forthcoming on this particular topic (or any other for that matter) is unjustified and at best, misdirected. The truth is, if we had to pay for the help we get here from alot of these responders, we couldn't afford it.
And lastly, if users come to the boards and there is no help/answers to be had, iTunes has a great big Support Page that allows you to address your specific issues directly to the people that should have the answers/help you require. With the added benefit of getting your complaint on record. Here is the link:
http://www.apple.com/support/itunes/store/browser/
Sincerely (And if in the US, Have a great holiday!)
mwn
Message was edited by: much wiser now

Information regarding Adobe forms

Dear Gurus,
I need some basic information regarding adobe forms to be used in ESS MSS portal for doing some basic actions by managers like hiring/maintenance of data for his subordinates.
Are there any specific system requirements so that adobe forms display in browser without any problems? Is there any specific internet browser which works without any problems?
What time is considered to be best time in which an empty form can be displayed?
In one line what is the acceptable time for a form to load which is not considered as slow and is it linked with network connections or individual systems of end users?
Need your kind inputs on this topic........
Regards,
kitchlu

Form works in IE 6, 7, 8 and Firefox
Make sure you have adobe products above 8.1 (includes all adobe products)
In Reader -> Edit -> Preference -> Internet - you have setting to display pdf in browser.
For a small form with limited fields, 5-10 seconds launching time can be achieved.
Performance depends on number of fields, User events, no of backend calls, number of dropdown boxes, Servce size, Network etc etc. Optimized code is another aspect to look into

HT1212 where do i go to get started with the disabled phone process. I selected the information regarding not syncing into itunes ever. but where do I go on the site to get started

where do i go to get started with the disabled phone process. I selected the information regarding not syncing into itunes ever. but where do I go on the site to get started

You use iTunes and restore the phone from Recovery Mode. You will lose all content. http://support.apple.com/kb/HT1808

Regarding Info cube and DSO

Hi,
Generally reporting will be done on Info Cube rather than DSO.
Suppose If we assign the same data source to Info Cube and DSO then both contains the same data.
Info cube have additive and aggregated functionality where DSO have the overwrite functionality .
Are we using cube for this functionality only ?
What about the Dimensions in Cube how they differ from data fields and key fields in DSO when we are developing same Bex Report on both ?
Please advice me .
Thanks in advance.
Thanks & Regards,
Ramnaresh.p

It is hard to compare Cube and DSO.
Both thier own usage.
1. InfoCube is always additive, while DSO supports overwrite functionality.
2. In InfoCube, combination of all the characteristic value is a Key in the Fact Table, while in ODS, you can specify your own Key Fields based on which you want to generate unique record in the DSO.
3. DSO supports many delta modes like D, R, N, X, after image, before image, while cube does not support all the modes. You can not delete the record based on the key from the cube by just loading the data. While DSO automaitcally deletes the record from active table and generates the reverse entry for Cube.
4. DSO is a flat structure and therefore, it is used to store information at detail level, while cube is used to store information at aggregated level.
So both the structures are very much different from each other. One can replace other at some places, but both the objects have thier own functionality.
- Danny

Information regarding BI Cube

Similar Messages

Maybe you are looking for