Infoset query: Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Hi
I have searched the forum and could not find suitable solution for my problem.
We have an infoset query whose data source is an ABAP program and this is within our BW system only. Earlier it used to run perfectly fine. Recently, due to the increasing data, the load for the same is failing because of memory issue with runtime Error TSV_TNEW_PAGE_ALLOC_FAILED . The dump occurs within 5-7 minutes of the data load. Once, we give some more filter selections in the infopackage, it runs fine.
Our problem is neither we can increase the memory any further nor we want to give filter selections in the infopackage. Also, once we execute the ABAP program alone, it runs fine.
Any help to solve this problem is appreciated.
Cheers
Chanda
Hi,
There are 3 ways to avoid this kind of problem:
1) Reduce the data set - if it is possible to process this in smaller
chunks then please do. This is an infoset query - please be more restrictive in your selections
- please refer to note 354657.
When you work with infosets that use tables or joins then it is
possible to read packages (from Rel. 6.10 on). When you work with
infosets that use logical databases or data retrieval programs than
it is not possible to read packaged - by technical restrictions.
That means that the query is executed completely taking all restrictions
into account and the result is stored internally.
2) Re-allocate some of the unused shared memories to program memory.
A prime candidate for this is Roll and Page "In Memory" values.
Alternative memory management via PHYSMEMSIZE generally overallocates
roll and page memory. Please reduce the amounts allocated to the "in
memory" part (see ST02) using the parameters below, for instance:
rdisp/ROLL_MAXFS....Total amt of ROLL (Filesystem+SHM); in 8KB blocks
rdisp/ROLL_SHM......Shared memory element of Roll; in 8KB blocks
rdisp/PG_MAXFS......Total amt of Page (Filesystem+SHM); in 8KB blocks
rdisp/PG_SHM........Shared memory element of Roll; in 8KB blocks
=>Filsystem amt = MAXFS - SHM
60MB or so each in memory should be sufficient.
This should allow an extra 260Mb or so for process memory.
Bear in mind however that Roll_SHM MUST be greater than 10% of
Roll_MAXFS.
This will not affect alternative memory management operation in any way.
3) Reduce the em/global_area_MB from 128 to 64MB.
These measures should give you ~320MB additionally per work process.
To get even more - if there is a 64 bit machine in the landscape then
redirect the load there.
I would like for you to review the SAP Note 712664. Although
the Notes 20527, 369726 and 166551 specifically refers to this
and has helped resolve multiple performance problems.
I hope it can help you.
Fran.
Similar Messages
-
Runtime errors: TSV_TNEW_PAGE_ALLOC_FAILED
Hi,
When I am trying to check the consistency of background jobs in SM65, It is throwig a runtime error TSV_TNEW_PAGE_ALLOC_FAILED. Kindly look into the below text message from ST22.
ShrtText
No storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Try to find out (e.g. by targetted data selection) whether the
transaction will run with less main memory.
If there is a temporary bottleneck, execute the transaction again.
If the error persists, ask your system administrator to check the
following profile parameters:
o ztta/roll_area (1.000.000 - 15.000.000)
Classic roll area per user and internal mode
usual amount of roll area per user and internal mode
o ztta/roll_extension (10.000.000 - 500.000.000)
o abap/heap_area_total (100.000.000 - 1.500.000.000)
Amount of memory (malloc) for all users of an application
server. If several background processes are running on
one server, temporary bottlenecks may occur.
Of course, the amount of memory (in bytes) must also be
available on the machine (main memory or file system swap).
Caution:
The operating system must be set up so that there is also
enough memory for each process. Usually, the maximum address
space is too small.
Ask your hardware manufacturer or your competence center
about this.
In this case, consult your hardware vendor
abap/heap_area_dia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each dialog process.
Parameters for background processes:
abap/heap_area_nondia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each background process.
Other memory-relevant parameters are:
em/initial_size_MB: (35-1200)
Extended memory area from which all users of an
application server can satisfy their memory requirement.
Error analysis
The internal table "IT_18" could not be enlarged further. To allow
error handling, the table had to be deleted before this log was
created. So, if you branch to the ABAP debugger from the display
of this log, the table will there be displayed with 0 rows.
At the moment of the termination, the following data was
determined for the respective internal table:
Storage location: "Session memory"
Row width: 1296
Number of rows: 1166120
Allocated rows: 1166120
Newly requested rows: 8 (in 1 blocks)
Last error logged in SAP kernel
Component............ "EM"
Place................ "SAP-Server ord-sapprd_PRD_00 on host ord-sapprd (wp 0)"
Version.............. 37
Error code........... 7
Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV "
Description.......... " "
System call.......... " "
Module............... "emxx.c"
Line................. 1878
How to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 1709536
Extended memory (EM)........... 408685712
Assigned memory (HEAP)......... 1190561024
Short area..................... " "
Paging area.................... 57344
Maximum address space.......... " "
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"TSV_TNEW_PAGE_ALLOC_FAILED" C
"SAPLSBPT" or "LSBPTFXX"
"DO_TBTCO_CONSISTENCY_CHECK"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "ord-sapprd"
Network address.......... "10.31.18.27"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "16x Intel 80158"
Character length......... 16 Bits
Pointer length........... 32 Bits
Work process number...... 0
Kindly suggest me the options ASAP as this is happened in the production system.
Thanks in advance,
Suneetha ReddyHi Sunnetha,
SM65 is a resource hungry tcode, and always suggested to run during a off-business hours. Try to run when there is not much acvitity going on in the system.
I'm not very much sure, but please check how many entries there in TBTCO table. as the dump gives indication of
DO_TBTCO_CONSISTENCY_CHECK.
Check RSBTCDEL(2) program is running daily or not. This runs as a background job to delete the old job information from the tables TBTC*. If this has not run, then you can run and delete older job logs and then retry.
Which system you're using? ECC or BW??
Note - parameter settings of BW largely varies from that of a ECC system.
Thanks,
Debasis. -
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED during extraction
Hi,
Anyone knows what the solution is to this problem:
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
|Short text |
| No more storage space available for extending an internal table. |
|What happened? |
| You attempted to extend an internal table, but the required space was |
| not available
|Error analysis |
| The internal table "\FUNCTION=CRM_UPLOAD_BTMBDOC_FILL\DATA=ET_BILLPLAN_D" could |
| not be further extended. To enable |
| error handling, the table had to be delete before this log was written. |
| As a result, the table is displayed further down or, if you branch to |
| the ABAP Debugger, with 0 rows. |
| |
| At the time of the termination, the following data was determined for |
| the relevant internal table: |
| |
| Memory location: "Session memory" |
| Row width: 1908 |
| Number of rows: 35912 |
| Allocated rows: 35912 |
| Newly requested rows: 8 (in 1 blocks) |
| Last error logged in SAP kernel |
| |
| Component............ "EM" |
| Place................ "xxx" |
| Version.............. 37 |
| Error code........... 7 |
| Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV " |
| Description.......... " " |
| System call.......... " " |
| Module............... "emxx.c" |
| Line................. 1897 |
| |
| The error reported by the operating system is: |
| Error number..... " " |
| Error text....... " " |
|How to correct the error |
| The amount of storage space (in bytes) filled at termination time was: |
| |
| Roll area...................... 6221152 |
| Extended memory (EM)........... 1826778184 |
| Assigned memory (HEAP)......... 2000035456 |
| Short area..................... " " |
| Paging area.................... 73728 |
| Maximum address space.......... 4294967295 |
| |
| If the error occures in a non-modified SAP program, you may be able to |
| find an interim solution in an SAP Note. |
| If you have access to SAP Notes, carry out a search with the following |
| keywords: |
| |
| "TSV_TNEW_PAGE_ALLOC_FAILED" " " |
| "SAPLCRM_UPLOAD_BTMBDOC" or "LCRM_UPLOAD_BTMBDOCF36" |
| "FILL_BILLPLAN" |
| |
| If you cannot solve the problem yourself and want to send an error |
| notification to SAP, include the following information: |
| |
| 1. The description of the current problem (short dump) |
| |
| To save the description, choose "System->List->Save->Local File |
| (Unconverted)". |
| |
| 2. Corresponding system log |
| |
| Display the system log by calling transaction SM21. |
| Restrict the time interval to 10 minutes before and five minutes |
| after the short dump. Then choose "System->List->Save->Local File |
| (Unconverted)". |
| |
| 3. If the problem occurs in a problem of your own or a modified SAP |
| program: The source code of the program |
| In the editor, choose "Utilities->More |
| Utilities->Upload/Download->Download". |
| |
| 4. Details about the conditions under which the error occurred or which |
| actions and input led to the error. |
| |Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Short text
No more storage space available for extending an internal table
|What happened?
| You attempted to extend an internal table, but the required space was
| not available.
|Error analysis |
| The internal table "\FUNCTION=CRM_UPLOAD_BTMBDOC_FILL\DATA=ET_BILLPLAN_D" could
| not be further extended. To enable
| error handling, the table had to be delete before this log was written. |
| As a result, the table is displayed further down or, if you branch to |
| the ABAP Debugger, with 0 rows. |
| |
| At the time of the termination, the following data was determined for |
| the relevant internal table: |
| |
| Memory location: "Session memory" |
| Row width: 1908 |
| Number of rows: 35912 |
| Allocated rows: 35912 |
| Newly requested rows: 8 (in 1 blocks) |
| Last error logged in SAP kernel |
| |
| Component............ "EM" |
| Place................ "SAP-Server XXXX" |
| Version.............. 37 |
| Error code........... 7 |
| Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV " |
| Description.......... " " |
| System call.......... " " |
| Module............... "emxx.c" |
| Line................. 1897 |
| |
| The error reported by the operating system is: |
| Error number..... " " |
| Error text....... " " |
| |
| |
| |
| |
|How to correct the error |
| The amount of storage space (in bytes) filled at termination time was: |
| |
| Roll area...................... 6221152 |
| Extended memory (EM)........... 1826778184 |
| Assigned memory (HEAP)......... 2000035456 |
| Short area..................... " " |
| Paging area.................... 73728 |
| Maximum address space.......... 4294967295 |
| |
| If the error occures in a non-modified SAP program, you may be able to |
| find an interim solution in an SAP Note. |
| If you have access to SAP Notes, carry out a search with the following |
| keywords: |
| |
| "TSV_TNEW_PAGE_ALLOC_FAILED" " " |
| "SAPLCRM_UPLOAD_BTMBDOC" or "LCRM_UPLOAD_BTMBDOCF36" |
| "FILL_BILLPLAN" |
| |
| If you cannot solve the problem yourself and want to send an error |
| notification to SAP, include the following information: |
| |
| 1. The description of the current problem (short dump) |
| |
| To save the description, choose "System->List->Save->Local File |
| (Unconverted)". |
| |
| 2. Corresponding system log |
| |
| Display the system log by calling transaction SM21. |
| Restrict the time interval to 10 minutes before and five minutes |
| after the short dump. Then choose "System->List->Save->Local File |
| (Unconverted)". |
| |
| 3. If the problem occurs in a problem of your own or a modified SAP |
| program: The source code of the program |
| In the editor, choose "Utilities->More |
| Utilities->Upload/Download->Download". |
| |
| 4. Details about the conditions under which the error occurred or which |
| actions and input led to the error. |
| | -
Report MB5L giving runtime error TSV_TNEW_PAGE_ALLOC_FAILED
Hi,
While running the Report MB5L we are getting the runtime
error "TSV_TNEW_PAGE_ALLOC_FAILED"
We tried to schedule this report at non-peak hours but it again got
terminated with same error.
We are using 12GB of RAM.
ztta/roll_area 6500000
ztta/roll_extension 4000317440
abap/heap_area_total 3001024512
abap/heap_area_dia: 5000683008
abap/heap_area_nondia: 2000000000
em/initial_size_MB: 8192
Please find the attached screenshot of ST22 dump analysis.
Regards,
Prashant
Edited by: Prashant Shukla on Feb 25, 2009 11:10 AMHi Juan,
Pls find the details below-:
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time 24.02.2009 23:31:32
Short text
No more storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
If the error persists, ask your system administrator to check the
following profile parameters:
Error analysis
The internal table "\FUNCTION=MBEW_EXTEND\DATA=SEARCH_MBEWH_TAB[]" could not be
further extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 372
Number of rows: 354608
Allocated rows: 354608
Newly requested rows: 32 (in 1 blocks)
How to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 6203136
Extended memory (EM)........... 4001304840
Assigned memory (HEAP)......... 2000059568
Short area..................... " "
Paging area.................... 32768
Maximum address space.......... 18446697160833538863
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TSV_TNEW_PAGE_ALLOC_FAILED" " "
"SAPLMG27" or "LMG27F02"
"SEARCH_EXIT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "ecprdciclu"
Network address...... "172.25.1.34"
Operating system..... "Linux"
Release.............. "2.6.18-53.el5"
Hardware type........ "x86_64"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 19
Shortdump setting.... "full"
Database server... "isrecprdb2"
Database type..... "ORACLE"
Database name..... "RPD"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Nov 18 2008 20:45:39"
create on........ "Linux GNU SLES-9 x86_64 cc3.3.3"
Database version. "OCI_102 (10.2.0.2.0) "
Patch level. 185
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Linux 2.6"
Memory consumption
Roll.... 6203136
EM...... 4001304840
Heap.... 2000059568
Page.... 32768
MM Used. 5803144952
MM Free. 199241240
User and Transaction
Client.............. 610
User................ "SANCHIT"
Language key........ "E"
Transaction......... " "
Transactions ID..... "49A289F286FA2313E1000000AC190122"
Program............. "SAPLMG27"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
Termination occurred in the ABAP program "SAPLMG27" - in "SEARCH_EXIT".
The main program was "RM07MBST ".
In the source code you have the termination point in line 558
of the (Include) program "LMG27F02".
The program "SAPLMG27" was started as a background job.
Job Name....... "RM07MBST"
Regards,
Prashant -
Handle Runtime error: TSV_TNEW_PAGE_ALLOC_FAILED
Hi,
In my programme, some times I end up with handling of lots of data in internal table. And this results in a dump.
Category ABAP Server Resource Shortage
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Short text
No more memory available to extend an internal table.
I read few threads where they suggested to increase the internal memory of ths system. This is beyond my scope!
Is there anyway I can catch this exception and stop the programme from executing further?
Thanks in advance!
Cheers
KiranHello Kiran,
TSV_TNEW_PAGE_ALLOC_FAILED is a not catchable error. It happens if a program exceeds the system boundaries, typically ~2 GB. Requesting so much memory is a strong indication for a flaw in the archtecture.
Anyway these kind of errors require a change in the program or in the arguments given to them. In newer releases you may try S_MEMORY_INSPECTOR to analyse the endless need of memory. In older releases watch out for hughe internal tables in the ST22 dump.
Regards
Klaus -
Runtime error TSV_TNEW_PAGE_ALLOC_FAILED on executing FAGLL03.
Hi expert,
I am getting Runtime error TSV_TNEW_PAGE_ALLOC_FAILED error while executing FAGLL03.
Please do the neeful.
extented memeory--4,186,112
and Heap Memory---1,960,171
is configured.
Os--HP-UX
ECC 6.0 with oracle 10g
server has 12 GB of RAM for the application instance and db instance is other server.
Please
Regards,
vivekHow to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 5720752
Extended memory (EM)........... 502780800
Assigned memory (HEAP)......... 0
Short area..................... " "
Paging area.................... 122880
Maximum address space.......... 4294967295
and the paramters are.
em/initial_size_MB---4092
abap/heap_area_total---2000000000
Please do the neeful. -
Runtime Error TSV_TNEW_PAGE_ALLOC_FAILED
Hello friends,
One of our Z-transactions (run in background) terminates with the runtime error TSV_TNEW_PAGE_ALLOC_FAILED. It runs successfully in another system. Of course memory settings are different in these systems so are the resources. I see in the affected system that parameter abap/heap_area_total is 2GB and parameters abap/heap_area_dia and abap/heap_area_nondia are only allocated 10MB each. Will there be any issue if we increase the above 2 parameters to 2GB each? If we do so, is the value allocated entirely at startup? Will it affect system performance? Please help.
Thanks,
Atul Lotlikar.Hi Atul,
You can extend abap/heap_area_dia and abap/heap_area_nondia to 2GB without any problem. 10MB was limitation for 32-bit AIX system. It only gets activated at the start up.
However, you might want to have a look at em/initial_size_MB and ztta/roll_extension and try to increase them in the system where the problem is occurring.
Also, two systems can have different amount of data volume which can explain why it runs in one system but not in other. Then you probably have to have a look at the Z-program itself.
Hope it helps.
Cheers !!
Satya.
PS: pls reward points if the answer was helpful...Thx. -
InfoSet Query: Syntax Error while generating the program.
Dear All,
I have a Query in CRM system which contains an Infoset based on LDB.
The InfoSet Query throws up a Syntax error while generating the program.
So, we are not able to change the Infoset using the Infoset Query through SQ01.
The error is as follows:-
Syntax error in program "AQZZ==/SAPQUERY/CRM_ACTMON1 ".
Error in the ABAP Application Program
The current ABAP program "CL_QUERY_OUTPUT_DEFINITION====CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "AQZZ==/SAPQUERY/CRM_ACTMON1 "
in include "AQZZ==/SAPQUERY/CRM_ACTMON1 " in
line 28:
""CRMT_REPORT_LOCATORLIST" must be a flat structure. You cannot use int"
"ernal tables, strings, references, or structures as components. -"
Please help me arrive at an solution, so that we are able to change the Infoset through the InfoSet Query.
Awaiting your reply as soon as possible.
Thanks and Regards,
Pankaj.There is an error in your query, specifically in the definition of CRMT_REPORT_LOCATORLIST. In the short dump (transaction ST22) you will see more details and the exact location of an error if you just scroll down.
I can't tell more because this problem is specific to your system, to which I have no access. Read the whole dump and look at all the objects mentioned there. -
Hi,
whenver iam trying to restrict a Fisical year/period time characterstic in query designer iam getting a runtime error with the message "Query run time error'457' This key is already asssociated with an element of this collection".
Does any one know what might be the reason and how to resolve this issue.
Thanks,
Vaka.Hi,
Check SAP Note - 517232
hope it helps
regards
Vikash -
InfoSet Query modification error
Hi,
I am trying to modify a InfoSet Query in SQ01 developed by a SD consultant last time. I already assigned my user ID in the User Group (in SQ03) which is referred by this Query. At the same time, I also assigned the Change Authorization to my ID.
After that, I modified this InfoSet in the SQ02 to add on 1 table and the Save is successful. Then I try to modify the display layout of the Query in SQ01. When I save it, it give me a message "The query is locked for changes by SDUSER". The ID SDUSER is used by the SD consultant last time. Then the modification is not saved.
I already checked in AL08 and also SM04, and found that this user is not log in at that time.
I already done whatever I know to try to solve this problem but I still can't settle it. Can anyone please help me on this? Why can this happen? How can I unlock it?
Thank you.Hi,
the lock was made by SDUSER when he created the querie. It's an option in the first screen "Title, Format" (specials attributes). When this option is select, only the specific user can change the query (sometimes some modifications are allowed by other user's in specific conditions).
The only way of resolving the problem, is the SDUSER to disable that option from there. After that you will be able to change it.
If that user doesn't exists, you must call the Basis team to create the user again, log on, and change the option.
Regards, -
I am getting the following error, when running my query
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION*
*ABEND: An exception with the type CX_RS_SQL_ERROR_SILENT occurred, but was neither handled locally, nor declared in a RAISING clause*
*ABEND: ORA-00904: "P0000"."NFCAT_TYPE": invalid identifier
We started having this error afte we recently upgraded to patch 15 from patch 10.
Any ideas why we would get this kind of error??Malik,
You mean the SQL generated by the query right??
Here is the SQL
SELECT
/*+ STAR_TRANSFORMATION FACT(F) */
"D1"."SID_0CATCODE_FE" AS "S____2251"
, SUM ( "F"."PROBL_FREQ" ) AS "Z____2805"
, COUNT( * ) AS "Z____070"
FROM
"/BI0/F0QM_C09" "F"
JOIN
"/BI0/D0QM_C091" "D1"
ON
"F" . "KEY_0QM_C091"
= "D1" . "DIMID"
JOIN
"/BI0/D0QM_C09P" "DP"
ON
"F" . "KEY_0QM_C09P"
= "DP" . "DIMID"
JOIN
"/BI0/D0QM_C09T" "DT"
ON
"F" . "KEY_0QM_C09T"
= "DT" . "DIMID"
JOIN
"/BI0/XNOTIFICATN" "X1"
ON
"F" . "KEY_0QM_C09A"
= "X1" . "SID"
JOIN
"/BI0/SCAT_CODE" "S1"
ON
"X1" . "S__0NFCAT_CODE"
= "S1" . "SID"
WHERE
"DP"."SID_0CHNGID"
= 0
) ) AND ( (
"DT"."SID_0FISCVARNT"
= 3
) ) AND ( (
"S1"."CAT_CODE"
= 'FPA'
) ) AND ( (
"X1"."S__0NFCAT_TYPE"
= 28
) ) AND ( (
"X1"."S__0NOT_TYPE"
= 112
) ) AND ( (
"DP"."SID_0RECORDTP"
= 0
) ) AND ( (
"DP"."SID_0REQUID"
<= 312193
AND
"X1"."OBJVERS"
= 'A'
GROUP BY
"D1"."SID_0CATCODE_FE" -
Infoset query giving error post upgrade
Hi All,
We have upgraded our system from BW 3.5 to BI 7. Post upgrade we are getting error while opening/executing queries on infoset.
In ST22 the error is UNCAUGHT_EXCEPTION -CX_RSD_NAME_ERROR.
The infoset is active.
Thanks for the help.
Regards,
NirajDear Both,
I resolved the problem by applying the solution suggested by Wond.
The SP details are as below,
SAP_BW 700 0015 SAPKW70015 SAP NetWeaver BI 7.0
We were facing this issue in development system. We didn't faced this issue in sandbox which was a copy of production. We are in process of upgrading now quality.
Points assigned to Wond.
Thanks to both for help.
Regards,
Niraj -
Runtime Error: TSV_TNEW_PAGE_ALLOC_FAILED during ODS Activation
Hi,
I have nearly 120Million records in new data of an ODS, When I am trying to activate I am getting this error message.
What could be the solution to activate this.
Regards,
TonyHi Tony,
you need to check the dump together with a basis person to increase some parameter in order to have more memory available for the process. Another solution might be to do a partial activation of the data. But this one does only work if you have more than one request to activate.
regards
Siggi -
A problem about ABAP Runtime Error
Now i am responsible for writing a program, including an internal table, which will store 3 million Datensätze.
But when ich ran this program, an error happened:
Runtime Error: TSV_TNEW_PAGE_ALLOC_FAILED
Short Text:
No more storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was not available.
CALL FUNCTION 'RRX_GRID_CMD_PROCESS' "Query ausführen
EXPORTING i_handle = g_handle
i_cmdid = 'STRT'
i_iobjnm = g_iobjnm
IMPORTING e_max_x = g_x
e_max_y = g_y
TABLES i_t_ranges = g_t_ranges
e_t_dim = g_t_dim
e_t_mem = g_t_mem
e_t_cel = g_t_cel
c_t_prptys = g_t_prptys
e_t_atr = g_t_atr
e_t_grid = g_t_grid
e_t_ranges = g_t_ranges
e_t_con = g_t_con
e_t_fac = g_t_fac
EXCEPTIONS inherited_error = 1
no_record_found = 2
terminated_by_user = 3
no_processing = 4
no_change = 5
dbcl_nosupport = 6
no_authorization = 7
x_message = 8
screen_canceled = 9
launch_url = 10
OTHERS = 11.
IF sy-subrc ne 0.
CALL FUNCTION 'DEQUEUE_E_BIW_IOBJ' EXPORTING IOBJNM = 'U_SSTMON'.
raise QUERY_RUN_ERROR.
endif.
if not p_sstmon is initial.
delete from /bic/pu_sstmon.
endif.
CALL FUNCTION 'DEQUEUE_E_BIW_IOBJ' EXPORTING IOBJNM = 'U_SSTMON'.
Output der Query in schlanke Tabelle mit erstem Feld 'y' umladen...
loop at g_t_grid into wa_g_t_grid.
i_grid-y = wa_g_t_grid-y.
i_grid-x = wa_g_t_grid-x.
i_grid-data = wa_g_t_grid-data.
if i_grid-data(1) = m1. "Hochkomma entfernen
shift i_grid-data.
endif.
append i_grid . Error happened hier
endloop.
refresh g_t_grid.
sort i_grid by y x.
Who could give me some suggestion to solve this problem?
Thank you in advance.thank you for your info.
I think that using package size is only choice to avoid the huge internal tabel.
But now i have a question. I must sort this internal table. When i use package size, then i can only sort a part of internal table. This will cause data uncorrect.
SELECT * FROM zubpgrid INTO TABLE i_grid PACKAGE SIZE 10000.
Legende des Grids auswerten (1. Zeile)...
SORT i_grid BY y x.
LOOP AT i_grid.
if i_grid-y ne 1. "1. Zeile Ende
exit. "loop at i_grid
endif.
leere Titel in der RSRT-Ausgabe fehlen in der int. Tabelle.
Sie sind Texte zum Vorgängerfeld und werden hier für die Steuerung
eingefügt, mit Name der Schlüsselfeldes + '_TXT'
l_v_delta_x = i_grid-x - i_gridlegende-x.
if l_v_delta_x > 1. "da fehlte was
concatenate i_gridlegende-data '_TXT' into i_gridlegende-data.
add 1 to i_gridlegende-x. "das fehlende x
append i_gridlegende.
endif.
jetzt das aktuelle Feld aus i_grid...
i_gridlegende-data = i_grid-data.
i_gridlegende-x = i_grid-x.
append i_gridlegende.
DELETE i_grid.
ENDLOOP.
ENDSELECT
Who could help me to solve this problem?
Thanks in advance! -
Runtime error while loading data in BI 7.0
Hi All,
While loading data in BI 7.0,
I am getting Runtime Errors "TSV_TNEW_PAGE_ALLOC_FAILED" . No more space available for extending internal table.
As per SAP BASIS SUPPORT comments:
"This is NOT a space problem but rather a huge memory resource consumption one, as you're trying to hold excessive amount of data in Memory, and that's when you get the short dump; I know that SAP sometimes is not clear in explaining the issue (ie "No more storage space available...."), but this refers to memory requirement, not disk storage space per se.
So, please try to break down your data load in smaller sets and this will work OK"
How to proceed with the above comments? How to break down data load in to smaller sets?
Please helpme....there could be various ways -
using selections / filters in Infopackage / DTPs based on may be some period or some other char you could identify based on your data.
Hope it helps
Vikash
Maybe you are looking for
-
Sql server replication from SQL SERVER VERSION(7.0) to SQL SERVER 2005
Hi All, We are trying to create a replication between Sql server 7.0 data to SQL server 2005 data . We tried to create a local subscription in Sql server ,when tried to connect to publisher running in Sql server 7.0 it is showing an error message li
-
HT1335 How to transfer iPod to laptop
I am trying to transfer music from iPod to my laptop but I don't know how to do it Cheers
-
Change role name after copying
I copied a role (Business Explorer) and want to rename the role. Changing the name does not help, because only changes to other languages than the original language are taking effect. Changing the ID is possible, but there I am not allowed to change
-
Monitor Is Flickering - ATI Display Driver Problem Error Message
Hello, for the last few weeks, I have been having a monitor issue. Everytime I turn my computer and monitor on, it is flickering like crazy on my HP 2509B Desktop Monitor, and on the right bottom corner a flag shows up with ATI Display driver, and I
-
Using the iPhone 5 charger worldwide
Hello, I just bought the iPhone 5 in the uk. Will I be able to use the charger worldwide? Can I use the USB cable with the old iPhones charger? Thank you