Initial execution of a workbook/query runs without ending

Hi, Experts,
I encountered a very strange behavior of Bex tool. Sometimes, Initial execution of a workbook/query runs without ending at u2018Waiting for reply from BW Serveru2019 state, then I cancel the report and run it again and it would return results within minutes. Itu2019s like it forgot to return results.
The basis team looked at the queries in the database, and said that there were actually a number of different queries being executed by my Bex query, but each individual query runs fairly quickly. The basis person pulled the statements out and ran them directly against the database and they returned result in sub seconds.
Any thoughts? Possible solution?
Thanks
Chimei

Hi,
Could u let us know what is the GUI frontend patch version you are on. Also, are there any AddOn's Installed.
What version of Excel are you using. Also just for a check, run sapbexc.xla on your local machine and check the output.
Regards,
Sree.

Similar Messages

My query still running und running without end

Hi Everybody,
Mr. Randolf allready advice to provide an explain plan but But i cannot beause my query still running und running.
What to do please.
select D1.c1 as c1,
 D1.c2 as c2,
 D1.c3 as c3,
 D1.c4 as c4,
 D1.c5 as c5,
 D1.c6 as c6,
 D1.c7 as c7,
 D1.c8 as c8,
 D1.c9 as c9,
 D1.c10 as c10,
 D1.c11 as c11,
 D1.c12 as c12,
 D1.c13 as c13,
 D1.c14 as c14,
 D1.c15 as c15,
 D1.c16 as c16,
 D1.c17 as c17,
 D1.c18 as c18,
 D1.c19 as c19,
 D1.c20 as c20,
 D1.c21 as c21,
 D1.c22 as c22,
 D1.c23 as c23,
 D1.c24 as c24,
 D1.c25 as c25,
 D1.c26 as c26
from
 (select D1.c1 as c1,
 D1.c2 as c2,
 D1.c3 as c3,
 D1.c4 as c4,
 D1.c5 as c5,
 D1.c6 as c6,
 D1.c7 as c7,
 D1.c8 as c8,
 D1.c9 as c9,
 D1.c10 as c10,
 D1.c11 as c11,
 D1.c12 as c12,
 D1.c13 as c13,
 D1.c14 as c14,
 D1.c15 as c15,
 D1.c16 as c16,
 D1.c17 as c17,
 D1.c18 as c18,
 D1.c19 as c19,
 D1.c20 as c20,
 D1.c21 as c21,
 D1.c22 as c22,
 D1.c23 as c23,
 D1.c24 as c24,
 D1.c25 as c25,
 D1.c26 as c26
 from
 (select D1.c2 as c1,
 D1.c3 as c2,
 D1.c4 as c3,
 D1.c5 as c4,
 D1.c6 as c5,
 D1.c7 as c6,
 D1.c8 as c7,
 D1.c9 as c8,
 D1.c10 as c9,
 D1.c11 as c10,
 D1.c12 as c11,
 D1.c13 as c12,
 D1.c14 as c13,
 D1.c15 as c14,
 D1.c16 as c15,
 D1.c17 as c16,
 D1.c18 as c17,
 D1.c19 as c18,
 D1.c20 as c19,
 D1.c1 as c20,
 D1.c25 as c21,
 D1.c24 as c22,
 D1.c1 + D1.c25 + D1.c24 as c23,
 D1.c21 as c24,
 D1.c22 as c25,
 D1.c23 as c26,
 ROW_NUMBER() OVER (PARTITION BY D1.c2, D1.c3, D1.c4, D1.c5, D1.c6, D1.c7, D1.c8, D1.c9, D1.c10, D1.c11, D1.c12, D1.c13, D1.c14, D1.c15, D1.c16, D1.c17, D1.c18, D1.c19, D1.c20, D1.c21, D1.c22, D1.c23 ORDER BY D1.c2 ASC, D1.c3 ASC, D1.c4 ASC, D1.c5 ASC, D1.c6 ASC, D1.c7 ASC, D1.c8 ASC, D1.c9 ASC, D1.c10 ASC, D1.c11 ASC, D1.c12 ASC, D1.c13 ASC, D1.c14 ASC, D1.c15 ASC, D1.c16 ASC, D1.c17 ASC, D1.c18 ASC, D1.c19 ASC, D1.c20 ASC, D1.c21 ASC, D1.c22 ASC, D1.c23 ASC) as c27
 from
 (select count(case when T507690.SR_SUBTYPE_CD = 'Anfrage' then T507669.INTEGRATION_ID end ) as c1,
 T33809.ORG_NAME as c2,
 T498657.ORG_NAME as c3,
 T36044.X_CUST_STATUS as c4,
 T495757.X_DB_ADDRESSEE as c5,
 T495692.SR_NUM as c6,
 T488901.CALENDAR_DATE as c7,
 case when T495757.STATUS in ('Abgeschlossen', 'Abschluss ohne Antwort') then T489959.CALENDAR_DATE else T489831.CALENDAR_DATE end as c8,
 T507690.X_DB_LEAD_ORG as c9,
 T507690.X_DB_TRAVEL_CHAIN as c10,
 T507690.SR_TYPE_CD as c11,
 T507690.X_DB_CAT_1 as c12,
 T507690.X_DB_CAT_2 as c13,
 T507690.X_DB_CAUSE_RGN as c14,
 T507690.X_DB_ORDERED_BY as c15,
 case when T507669.PROBLEM_DT = '01.01.1901' then cast(NULL as DATE) else T507669.PROBLEM_DT end as c16,
 T507669.X_DB_TRAIN_NO as c17,
 T489446.BHF_DESC as c18,
 T507656.X_DB_LINE as c19,
 T507656.SR_NUM as c20,
 T488901.ROW_WID as c21,
 T33809.ROW_WID as c22,
 T507656.ROW_WID as c23,
 count(case when T507690.SR_SUBTYPE_CD = 'Lob' then T507669.INTEGRATION_ID end ) as c24,
 count(case when T507690.SR_SUBTYPE_CD = 'Beschwerde' then T507669.INTEGRATION_ID end ) as c25
 from
 WC_BHF_D T489446 /* Dim_WC_BHF_D_Bahnhof_Kategorisierung */ ,
 W_INT_ORG_D T498657 /* Dim_W_INT_ORG_D_Team */ ,
 W_INT_ORG_D T33809 /* Dim_W_INT_ORG_D_Primary_Owner_Org */ ,
 W_DAY_D T496016 /* Dim_W_DAY_D_Bezugsdatum_Vorgang */ ,
 W_DAY_D T488901 /* Dim_W_DAY_D_Eingangsdatum */ ,
 W_DAY_D T489831 /* Dim_W_DAY_D_Abtretungsdatum */ ,
 W_DAY_D T489959 /* Dim_W_DAY_D_Abschlussdatum */ ,
 W_PERSON_D T36044,
 WC_VORGANG_F T495717 /* Fact_WC_VORGANG_F */ ,
 WC_VORGANG_H T495744 /* Helper_WC_VORGANG_H */ ,
 WC_VORGANG_MD T495757 /* Dim_WC_VORGANG_MD */ ,
 WC_CATEGORIZATION_D T507656 /* Dim_WC_CATEGORIZATION_D */ ,
 WC_CATEGORIZATION_F T507669 /* Fact_WC_CATEGORIZATION_F */ ,
 WC_CATEGORIZATION_MD T507690 /* Dim_WC_CATEGORIZATION_MD */ ,
 WC_VORGANG_D T495692 /* Dim_WC_VORGANG_D */
 where ( T33809.ROW_WID = T495744.OWNER_MANDANT_WID and T488901.ROW_WID = T495744.OPEN_DT_WID and T489446.ROW_WID = T507669.BAHNHOF_WID and T489831.ROW_WID = T495717.TRANSFER_DT_WID and T36044.ROW_WID = T495717.CONTACT_WID and T489959.ROW_WID = T495717.CLOSE_DT_WID and T495717.VORGANG_MD_WID = T495757.ROW_WID and T495717.VORGANG_WID = T495744.VORGANG_WID and T495744.OWNER_TEAM_WID = T498657.ROW_WID and T495744.VORGANG_WID = T507669.VORGANG_WID and T495692.ROW_WID = T495744.VORGANG_WID and T496016.CALENDAR_DATE = TIMESTAMP '2009-08-18 00:00:00' and T507656.ROW_WID = T507669.CATEGORIZATION_WID and T507669.CATEGORIZATION_MD_WID = T507690.ROW_WID and T33809.ORG_NAME <> 'Default Organization' and T33809.ORG_NAME <> 'Deutsche Bahn' and T33809.ORG_NAME <> 'Nicht spezifiziert' and T33809.ORG_NAME <> 'Siebel Administration' and T498657.ORG_NAME <> 'DB AG' and T496016.ROW_WID < T495717.EFFECTIVE_TO_DT_WID and T496016.ROW_WID < T495744.EFFECTIVE_TO_DT_WID and T496016.ROW_WID >= T495717.EFFECTIVE_FROM_DT_WID and T496016.ROW_WID < T507669.EFFECTIVE_TO_DT_WID and T496016.ROW_WID >= T495744.EFFECTIVE_FROM_DT_WID and T496016.ROW_WID >= T507669.EFFECTIVE_FROM_DT_WID and (T495757.STATUS in ('Abgeschlossen', 'Abschluss ohne Antwort', 'Abtretung')) and case case T495757.STATUS_I when 'In Progress' then 'Offen' when 'Draft' then 'Offen' when 'Preliminary work for someone' then 'Offen' when 'Assigned' then 'Offen' when 'Abgeschlossen' then 'Geschlossen' when 'Closed' then 'Geschlossen' when 'Closing without response' then 'Geschlossen' when 'Transfer' then 'Abtretung' else 'Nicht Spezifiziert' end when 'Geschlossen' then T489959.CALENDAR_DATE when 'Abtretung' then T489831.CALENDAR_DATE end between TO_DATE('2009-07-01' , 'YYYY-MM-DD') and TO_DATE('2009-07-31' , 'YYYY-MM-DD') )
 ) D1
 ) D1
 where ( D1.c27 = 1 )
 ) D1;
Thank a lot in advance

Hi Guys,
Please how to optimize it,
Thanks
Ora_Genie

Query runs automatically on workbook open

Hi,
Generally when we open the workbook, query runs automatically with the last accessed selections or it pops up the variable screen and runs the query. Is there any way like query can be shown as a button, and runs when the user clicks on the button? It is just like planning folder wherein we have multiple layouts shown as buttons. If two queries are inserted in the workbook, on workbook open, it runs both the queries, means it is locking both the queries data even though user will plan on one query at first and the second query next. Please let me know if any one has done that.
Thanks,
Bindu

Hi Bindu,
an easy solution could be run query in non-planning mode (you have a tick in query definition) and then add a button to change query to planning mode in the workbbok (there are standard function available in workbooks) This button can be for only one query or multiple queries in workbook.
Regards,
Enrique

Need a Query to Get Execution time of each query in Proc if its running

I am looking for query which give total execution time of individual query running currently ?
we have queries but it will give cumulative time from the start date,
for example - if stored proc has 10 queries , if each query taking 10 seconds it should show me 10 secoond if its running, not from when stored proc execution started , if you have any query please let me know
only for running queries ,

Is this the logic you're after?
DECLARE @timeStamp DATETIME2 = CURRENT_TIMESTAMP, @lapTimeStamp DATETIME2, @x INT = 0
SET @lapTimeStamp = CURRENT_TIMESTAMP
WHILE @x < 10000
BEGIN
SET @x = @x + 1
END
PRINT CAST(DATEDIFF(MS,@TIMESTAMP,CURRENT_TIMESTAMP) AS VARCHAR) + ' milliseconds have elapsed since the begining of the proc. ' + CAST(DATEDIFF(MS,@lapTimeStamp,CURRENT_TIMESTAMP) AS VARCHAR) + ' have elapsed since the last batch'
SET @lapTimeStamp = CURRENT_TIMESTAMP
SET @x = 0
WHILE @x < 10000
BEGIN
SET @x = @x + 1
END
PRINT CAST(DATEDIFF(MS,@TIMESTAMP,CURRENT_TIMESTAMP) AS VARCHAR) + ' milliseconds have elapsed since the begining of the proc. ' + CAST(DATEDIFF(MS,@lapTimeStamp,CURRENT_TIMESTAMP) AS VARCHAR) + ' have elapsed since the last batch'
SET @lapTimeStamp = CURRENT_TIMESTAMP
SET @x = 0
WHILE @x < 10000
BEGIN
SET @x = @x + 1
END
PRINT CAST(DATEDIFF(MS,@TIMESTAMP,CURRENT_TIMESTAMP) AS VARCHAR) + ' milliseconds have elapsed since the begining of the proc. ' + CAST(DATEDIFF(MS,@lapTimeStamp,CURRENT_TIMESTAMP) AS VARCHAR) + ' have elapsed since the last batch'

Query Explain without running it.

I use trans code rsrt to display the execution plan of my slow running query. Can anyone tell me how to do this WITHOUT running the query. Each time I try and exit it runs.
Thanks

Hi Richard,
I am not so sure but I think any optimizer program needs to run the QUERY somehow to detect the execution plan. Even if you go straight to the RDBMS (e.g. MSSQL, ORACLE etc.) bundled optimizer/analyzer utilities with them somehow executes the SQL Query to detect bottlenecks and problematic sections of the SQL Query (w/c is of no difference to BEX Query as in your Case).
Regards,
--Jkyle

Checking text query validity without actually running the query: ideas?

Hi,
I would like to implement a sort of function that does a preliminary check on the validity of the search string and ideally this function should work with both CTXCAT and CONTEXT indexes (and grammars).
Initially I thought that CTXQUERY.EXPLAIN function could do this for me, but, unless I am missing something, it only works with CONTEXT indexes and it doesn't accept a string containing a text query rewrite using CTXCAT grammar (it throws DRG-11119: operation is not supported by this index type).
Plan B would be to create an empty table with a CONTEXT index and then run the query either with the CONTEXT grammar or the CTXCAT grammar via query rewrite and if the query runs, returning no rows, presumably fast enough for this purpose, then the query string is assumed to be valid.
What I don't like much about plan B is the need for an additional table plus the "dummy" context indexes just to perform the parsing of the text query, but so far I didn't come up with more brilliant ideas.
Any thoughts?
Am I missing something that does the magic without hassle?
Thanks
Flavio

Under normal circumstances I wouldn't do this, as you say I'd just run the query and catch the error, but I need to do this inside a report refresh performed via AJAX (using Oracle Apex) and the catch is that when such refresh fails owing to a syntax error, the partial refresh mechanism of APEX becomes broken, so even if you amend the query and submit a new valid string, it won't show up any more.
That's why I need to be sure that the string is valid before running the query, hence the syntax checking function.
The google-style parser sounds interesting, may be I can try to implement it in a future release of my app!
Thanks
Flavio

Does SQL Query run faster with/without Conditions....

Hi All, forgive my novice question.
Was just wondering" In general if we run a SQL query on a single table; does my query run faster if there are multiple where conditions? or without. What happens if the conditions increase? My table is a big one with 5 million rows and some bitmap indexes defined on it.
Thanks,
Kon

I think it's difficult to give general rule because there are too much dependencies on the fact that the columns are indexed or not, on the way tables and indexes statistics are computed or not, on the possible session or instance parameters that the optimizer may use, on the Oracle version, etc.
Message was edited by:
Pierre Forstmann

Query Execution Time for a Query causing ORA-1555

dear Gurus
I have ORA-01555 error , earlier I used the Query Duration mentioned in Alert Log and increased the Undo Retention as I did not find th UnDOBLKS column of v$undostat high for the time of occurence of ORA-01555..
But new ORA-01555 is coming whose query duration exceeds Undo Retention time..
My question -
1. Is it possible to accurately find the query duration time besides the Alert Log file ?

abhishek, as you are using an undo tablespace and have already increased the time that undo data is retained via undo_retention then you might want to consider the following ideas which were useful with 1555 error under manual rbs segment management.
1- Tune the query. The faster a query runs the less likely a 1555 will occur.
2- Look at the processing. If a process was reading and updating the same table while committing frequenctly then the process under manual rbs management would basically create its own 1555 error rather than just being the victum of another process changing data and the rbs data being overlaid while the long running query was still running. With undo management the process could be generating more data than can be held for the undo_retention period but because it is committed Oracle has been told it doesn't really have to keep the data for use rolling back a current transaction so it gets discarded to make room for new changes.
If you find item 2 is true then separating the select from the update will likely eliminate the 1555. You do this by building a driving table that has the keys of the rows to be updated or deleted. Then you use the driver to control accessing the target table.
3- If the cause of the 1555 is or may be delayed block cleanout then select * from the target prior to running the long running query.
Realistically you might need to increase the size of the undo tablespace to hold all the change data and the value of the undo_retention parameter to be longer than the job run time. Which brings up back to option 1. Tune every query in the process so that the job run time is reduced to optimal.
HTH -- Mark D Powell --
dear mark
Thanks for the excellent advise..I found that the error is coming because of frequent commits..which is item 2 as u righly mentioned ..
I think I need to keep a watch on the queries running , I was just trying to find the execution time for the queries..If there is any way to find the query duration without running a trace ..
regards
abhishek

Error when run without admin rights

I created a program that need to be run on a companies computers, the people who will run it can't have admin rights, however, if the program is run without admin rights all it does is create an error txt file, with the following:
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x03109c30, pid=3852, tid=3896
# Java VM: Java HotSpot(TM) Client VM (1.5.0_08-b03 mixed mode, sharing)
# Problematic frame:
# C [GrFinger.dll+0x79c30]
--------------- T H R E A D ---------------
Current thread (0x00a6fdc0): JavaThread "AWT-EventQueue-0" [_thread_in_native, id=3896]
siginfo: ExceptionCode=0xc0000005, writing address 0x00000004
Registers:
EAX=0x03114a90, EBX=0x00000003, ECX=0x00000000, EDX=0x00000000
ESP=0x02faf7c8, EBP=0x02faf82c, ESI=0x058c9ac0, EDI=0x058b0bb0
EIP=0x03109c30, EFLAGS=0x00010206
Top of Stack: (sp=0x02faf7c8)
0x02faf7c8: 0309515b 058b0bdc 030941fb 058b0bb0
0x02faf7d8: 00a6fdc0 26acc138 058b0bb0 02fafb64
0x02faf7e8: 0310b658 00000000 030939e8 26acc138
0x02faf7f8: 03093e61 00000001 10001236 00a7832f
0x02faf808: 00a6fe80 02faf83c 02faf810 26acc138
0x02faf818: 02faf83c 26acd468 00000000 26acc138
0x02faf828: 02faf83c 02faf85c 00a72a8f 00000000
0x02faf838: 00a76509 22a76ed8 02faf840 26aca43b
Instructions: (pc=0x03109c30)
0x03109c20: 8b 41 08 50 ff 15 90 d0 10 03 c3 cc cc cc cc cc
0x03109c30: c6 41 04 01 c3 cc cc cc cc cc cc cc cc cc cc cc
Stack: [0x02f70000,0x02fb0000), sp=0x02faf7c8, free space=253k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [GrFinger.dll+0x79c30]
j com.griaule.grFinger.GrFinger.finalizeCapture()V+3
j salvationarmy.TemplateList.setup()V+198
j salvationarmy.TemplateList.<init>(Lcom/griaule/grFinger/GrFinger;Lcom/griaule/grFinger/Context;)V+59
j salvationarmy.LoginProgram.<init>()V+87
j salvationarmy.LoginProgram$20.run()V+4
j java.awt.event.InvocationEvent.dispatch()V+47
j java.awt.EventQueue.dispatchEvent(Ljava/awt/AWTEvent;)V+26
j java.awt.EventDispatchThread.pumpOneEventForHierarchy(ILjava/awt/Component;)Z+233
j java.awt.EventDispatchThread.pumpEventsForHierarchy(ILjava/awt/Conditional;Ljava/awt/Component;)V+26
j java.awt.EventDispatchThread.pumpEvents(ILjava/awt/Conditional;)V+4
j java.awt.EventDispatchThread.pumpEvents(Ljava/awt/Conditional;)V+3
j java.awt.EventDispatchThread.run()V+9
v ~StubRoutines::call_stub
V [jvm.dll+0x86e84]
V [jvm.dll+0xddead]
V [jvm.dll+0x86d55]
V [jvm.dll+0x86ab2]
V [jvm.dll+0xa16b2]
V [jvm.dll+0x10f4ac]
V [jvm.dll+0x10f47a]
C [MSVCRT.dll+0x2a3b0]
C [kernel32.dll+0xb683]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j com.griaule.grFinger.GrFingerNative.GrCapFinalize_native()I+0
j com.griaule.grFinger.GrFinger.finalizeCapture()V+3
j salvationarmy.TemplateList.setup()V+198
j salvationarmy.TemplateList.<init>(Lcom/griaule/grFinger/GrFinger;Lcom/griaule/grFinger/Context;)V+59
j salvationarmy.LoginProgram.<init>()V+87
j salvationarmy.LoginProgram$20.run()V+4
j java.awt.event.InvocationEvent.dispatch()V+47
j java.awt.EventQueue.dispatchEvent(Ljava/awt/AWTEvent;)V+26
j java.awt.EventDispatchThread.pumpOneEventForHierarchy(ILjava/awt/Component;)Z+233
j java.awt.EventDispatchThread.pumpEventsForHierarchy(ILjava/awt/Conditional;Ljava/awt/Component;)V+26
j java.awt.EventDispatchThread.pumpEvents(ILjava/awt/Conditional;)V+4
j java.awt.EventDispatchThread.pumpEvents(Ljava/awt/Conditional;)V+3
j java.awt.EventDispatchThread.run()V+9
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x02cb9850 JavaThread "Thread-3" [_thread_in_native, id=3916]
0x02c48748 JavaThread "Timer-0" [_thread_blocked, id=3908]
0x02c41d98 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=3912]
0x00355ed0 JavaThread "DestroyJavaVM" [_thread_blocked, id=3836]
=>0x00a6fdc0 JavaThread "AWT-EventQueue-0" [_thread_in_native, id=3896]
0x00a6e9b8 JavaThread "AWT-Windows" daemon [_thread_in_native, id=3892]
0x00a6e4c8 JavaThread "AWT-Shutdown" [_thread_blocked, id=3888]
0x00a0b048 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=3884]
0x00a09cc0 JavaThread "CompilerThread0" daemon [_thread_blocked, id=3876]
0x00a08f78 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=3872]
0x00a03ff8 JavaThread "Finalizer" daemon [_thread_blocked, id=3864]
0x0035fb30 JavaThread "Reference Handler" daemon [_thread_blocked, id=3868]
Other Threads:
0x009d8a08 VMThread [id=3856]
0x00a0c390 WatcherThread [id=3880]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation total 576K, used 323K [0x22a70000, 0x22b10000, 0x22f50000)
eden space 512K, 50% used [0x22a70000, 0x22ab0f08, 0x22af0000)
from space 64K, 99% used [0x22b00000, 0x22b0fff8, 0x22b10000)
to space 64K, 0% used [0x22af0000, 0x22af0000, 0x22b00000)
tenured generation total 1408K, used 836K [0x22f50000, 0x230b0000, 0x26a70000)
the space 1408K, 59% used [0x22f50000, 0x23021100, 0x23021200, 0x230b0000)
compacting perm gen total 8192K, used 821K [0x26a70000, 0x27270000, 0x2aa70000)
the space 8192K, 10% used [0x26a70000, 0x26b3d748, 0x26b3d800, 0x27270000)
ro space 8192K, 63% used [0x2aa70000, 0x2af7d608, 0x2af7d800, 0x2b270000)
rw space 12288K, 46% used [0x2b270000, 0x2b810608, 0x2b810800, 0x2be70000)
Dynamic libraries:
0x00400000 - 0x0040d000 C:\Program Files\Java\jre1.5.0_08\bin\javaw.exe
0x7c900000 - 0x7c9b0000 C:\WINDOWS\system32\ntdll.dll
0x7c800000 - 0x7c8f4000 C:\WINDOWS\system32\kernel32.dll
0x77dd0000 - 0x77e6b000 C:\WINDOWS\system32\ADVAPI32.dll
0x77e70000 - 0x77f01000 C:\WINDOWS\system32\RPCRT4.dll
0x77d40000 - 0x77dd0000 C:\WINDOWS\system32\USER32.dll
0x77f10000 - 0x77f57000 C:\WINDOWS\system32\GDI32.dll
0x77c10000 - 0x77c68000 C:\WINDOWS\system32\MSVCRT.dll
0x6d6c0000 - 0x6d85b000 C:\Program Files\Java\jre1.5.0_08\bin\client\jvm.dll
0x76b40000 - 0x76b6d000 C:\WINDOWS\system32\WINMM.dll
0x6d280000 - 0x6d288000 C:\Program Files\Java\jre1.5.0_08\bin\hpi.dll
0x76bf0000 - 0x76bfb000 C:\WINDOWS\system32\PSAPI.DLL
0x6d690000 - 0x6d69c000 C:\Program Files\Java\jre1.5.0_08\bin\verify.dll
0x6d300000 - 0x6d31d000 C:\Program Files\Java\jre1.5.0_08\bin\java.dll
0x6d6b0000 - 0x6d6bf000 C:\Program Files\Java\jre1.5.0_08\bin\zip.dll
0x6d000000 - 0x6d169000 C:\Program Files\Java\jre1.5.0_08\bin\awt.dll
0x73000000 - 0x73026000 C:\WINDOWS\system32\WINSPOOL.DRV
0x76390000 - 0x763ad000 C:\WINDOWS\system32\IMM32.dll
0x774e0000 - 0x7761d000 C:\WINDOWS\system32\ole32.dll
0x5ad70000 - 0x5ada8000 C:\WINDOWS\system32\uxtheme.dll
0x73760000 - 0x737a9000 C:\WINDOWS\system32\ddraw.dll
0x73bc0000 - 0x73bc6000 C:\WINDOWS\system32\DCIMAN32.dll
0x74720000 - 0x7476b000 C:\WINDOWS\system32\MSCTF.dll
0x6d240000 - 0x6d27f000 C:\Program Files\Java\jre1.5.0_08\bin\fontmanager.dll
0x7c9c0000 - 0x7d1d5000 C:\WINDOWS\system32\shell32.dll
0x77f60000 - 0x77fd6000 C:\WINDOWS\system32\SHLWAPI.dll
0x773d0000 - 0x774d2000 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2180_x-ww_a84f1ff9\comctl32.dll
0x5d090000 - 0x5d127000 C:\WINDOWS\system32\comctl32.dll
0x6d4c0000 - 0x6d4d3000 C:\Program Files\Java\jre1.5.0_08\bin\net.dll
0x71ab0000 - 0x71ac7000 C:\WINDOWS\system32\WS2_32.dll
0x71aa0000 - 0x71aa8000 C:\WINDOWS\system32\WS2HELP.dll
0x6d4e0000 - 0x6d4e9000 C:\Program Files\Java\jre1.5.0_08\bin\nio.dll
0x10000000 - 0x1000e000 C:\Program Files\Griaule\GrFinger 4.1 FREE\bin\GrFingerJava.dll
0x03090000 - 0x03697000 C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\GrFinger.dll
0x76780000 - 0x76789000 C:\WINDOWS\system32\SHFOLDER.dll
0x036a0000 - 0x036bd000 C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\dpFpFns.dll
0x036c0000 - 0x036ca000 C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\dpDevDat.dll
0x036d0000 - 0x036f6000 C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\dpDevClt.dll
0x77120000 - 0x771ac000 C:\WINDOWS\system32\OLEAUT32.dll
0x03700000 - 0x03775000 C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\dpFtrEx.dll
0x03780000 - 0x037de000 C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\dpMatch.dll
0x03810000 - 0x03917000 C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\BioNetAcsDLL.dll
0x03920000 - 0x0396d000 C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\USB4XX.DLL
0x76d60000 - 0x76d79000 C:\WINDOWS\system32\iphlpapi.dll
0x77920000 - 0x77a13000 C:\WINDOWS\system32\SETUPAPI.dll
0x037e0000 - 0x037f5000 C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\pthreadVC2.dll
0x71ad0000 - 0x71ad9000 C:\WINDOWS\system32\WSOCK32.dll
0x6d370000 - 0x6d37d000 C:\Program Files\Java\jre1.5.0_08\bin\JdbcOdbc.dll
0x74320000 - 0x7435d000 C:\WINDOWS\system32\ODBC32.dll
0x763b0000 - 0x763f9000 C:\WINDOWS\system32\comdlg32.dll
0x20000000 - 0x20017000 C:\WINDOWS\system32\odbcint.dll
0x4dd40000 - 0x4dd84000 C:\WINDOWS\system32\odbcjt32.dll
0x1b000000 - 0x1b170000 C:\WINDOWS\system32\msjet40.dll
0x1b5d0000 - 0x1b665000 C:\WINDOWS\system32\mswstr10.dll
0x5d130000 - 0x5d13e000 C:\WINDOWS\system32\odbcji32.dll
0x1b2c0000 - 0x1b2cd000 C:\WINDOWS\system32\msjter40.dll
0x1b2d0000 - 0x1b2f6000 C:\WINDOWS\system32\MSJINT40.DLL
0x5fe80000 - 0x5fe9b000 C:\WINDOWS\system32\odbccp32.dll
0x77c00000 - 0x77c08000 C:\WINDOWS\system32\VERSION.dll
0x77fe0000 - 0x77ff1000 C:\WINDOWS\system32\Secur32.dll
0x76fd0000 - 0x7704f000 C:\WINDOWS\system32\CLBCATQ.DLL
0x77050000 - 0x77115000 C:\WINDOWS\system32\COMRes.dll
0x1b810000 - 0x1b84a000 C:\WINDOWS\system32\msjtes40.dll
0x0f9a0000 - 0x0f9ab000 C:\WINDOWS\system32\VBAJET32.DLL
0x0f9c0000 - 0x0fa22000 C:\WINDOWS\system32\expsrv.dll
0x0cd90000 - 0x0cda1000 C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\fplib.dll
0x76c30000 - 0x76c5e000 C:\WINDOWS\system32\WINTRUST.dll
0x77a80000 - 0x77b14000 C:\WINDOWS\system32\CRYPT32.dll
0x77b20000 - 0x77b32000 C:\WINDOWS\system32\MSASN1.dll
0x76c90000 - 0x76cb8000 C:\WINDOWS\system32\IMAGEHLP.dll
0x0cec0000 - 0x0ceed000 C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\extdllR.dll
0x0d000000 - 0x0d03a000 C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\vrfdllR.dll
VM Arguments:
java_command: C:\Community Center\SalvationArmy.jar
Launcher Type: SUN_STANDARD
Environment Variables:
PATH=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Symantec\pcAnywhere\;C:\PROGRA~1\Griaule\GRFING~1.1FR\bin
USERNAME=mackd
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 15 Model 4 Stepping 1, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows XP Build 2600 Service Pack 2
CPU:total 2 (cores per cpu 1, threads per core 2) family 15 model 4 stepping 1, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ht
Memory: 4k page, physical 514792k(227580k free), swap 1255496k(937260k free)
vm_info: Java HotSpot(TM) Client VM (1.5.0_08-b03) for windows-x86, built on Jul 26 2006 01:10:50 by "java_re" with MS VC++ 6.0
Help!
GrFinger is an SDK put out by Grauile (or something like that) just seach grfinger in google, you'll find it.
Thanks

Don't you think you should really contact Grauile ?
They wrote the software, including the native DLL libraries, and probably encountered this problem before on dual processor machines.

TS1717 data executiion prevention keeps closing my itunes,but itunes wont run without it.help !

data execution protection keeps closing my itunes on my sony vaio.also get the messge c:\windows\system32softpub.dll.tried turning of the DEP but itunes wont run without it.no problems with any other programs.any thoughts

Taken at face value, you're having trouble with a Windows operating system file there.
Perhaps try an sfc /scannow. For instructions, see the following Microsoft document:
How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7

Query running too long on a partitioned table

Hello,
I'm trying to run the following query on a 73 million row table, but the query keeps running and running without returning any result within a reasonable amount of time.
select *
from svcdepot.service_log l
where dbms_lob.instr(l.service_log, 'SALESFORCE_ROLE_CREATED') > 0 and rownum < 2
and create_date > sysdate - .1
this table has a normal index on the create_date table and is also partitioned on create_date. The partition names are like PARTITION20120316 and PARTITION20120311. It says values less than TIMESTAMP' 2012-03-16 00:00:00' and TIMESTAMP' 2012-03-11 00:00:00', respectively. Could someone please tell me how I can modify the query so that it doesn't run forever? It seems to struggle against the create_date column (while I was troubleshooting). I just need one record with that SALESFORCE_ROLE_CREATED text in that clob column.
Thanks!

arizona9952 wrote:
Hello,
I'm trying to run the following query on a 73 million row table, but the query keeps running and running without returning any result within a reasonable amount of time.
select *
from svcdepot.service_log l
where dbms_lob.instr(l.service_log, 'SALESFORCE_ROLE_CREATED') > 0 and rownum < 2
and create_date > sysdate - .1
this table has a normal index on the create_date table and is also partitioned on create_date. The partition names are like PARTITION20120316 and PARTITION20120311. It says values less than TIMESTAMP' 2012-03-16 00:00:00' and TIMESTAMP' 2012-03-11 00:00:00', respectively. Could someone please tell me how I can modify the query so that it doesn't run forever? It seems to struggle against the create_date column (while I was troubleshooting). I just need one record with that SALESFORCE_ROLE_CREATED text in that clob column.
Thanks!Thread: HOW TO: Post a SQL statement tuning request - template posting
HOW TO: Post a SQL statement tuning request - template posting

Execution time of a query

Hi,
I am trying to find the execution time of a SQL query.
How to do it?
Regards.
Ashish

>I am trying to find the execution time of a SQL query.
How to do it?
Psuedo code:
time = SystemTime() -- get the current system time
RunSQL() -- run the SQL statement
print( SystemTime()-time ) -- displays the difference in time
Needless to say that this is utterly useless most of the time. The first time a query is run it may be subjected to a hard parse. The second time not. So the exact same SQL will show different execution times. This execution time measurement is useless as it does not tell you anything - except that there was a difference in time.
The first time a query runs it make do a lot of physical I/O to read the data from disk. The second time around, with the data in the db buffer cache, it makes use of logical I/O. There is a significant difference in the execution of the exact same SQL. Again, the measurement of execution is meaningless. It does not tell you anything. One number versus another number. Nothing meaningful to compare.
Fact. The very same SQL will have different execution times.
So what do you hope to gain from measuring it?

Execution time of sql query differing a lot between two computer

hi
execution time of a query in my computer and more than 30 different computer is less than one second but on one of our
customers' computers, execution time is more than ten minute. databases and data and queries are same. i re-install sql but problem remains. my sql is ms sql 2008 r2.
any one has idea for this problem?

Hi mahdi,
Obviously, we can't get enough information to help you troubleshoot this issue. So, please elaborate your issue with more detail so that the community members can help you in more effecient manner.
In addition, here is a good article regarding checklist for analyzing Slow-Running queries. Please see:
http://technet.microsoft.com/en-us/library/ms177500(v=sql.105).aspx
And SQL Server Profiler and Performance Monitor are good tools to troubleshoot performance issue, please see:
Correlating SQL Server Profiler with Performance Monitor:
https://www.simple-talk.com/sql/database-administration/correlating-sql-server-profiler-with-performance-monitor/
Regards,
Elvis Long
TechNet Community Support

Inserting into Table-in-Table after re-execution the Outer Table query

Hi Gurus,
I have a problem with inserting into Table-in-Table after re-execution the Outer Table query:
The problem:
I have two tables; both tables are based on VO; tables have a VL between them;
The Inner Table is hidden when page lode.
I'm executing the Outer Table, open the details to see the Inner Table, I can add rows to the Inner Table. Everything is OK.
But-
After I'm executing the Outer Table again –
Adding new rows to the Inner Table is not work anymore, despite I'm executing the Inner Table RowSet query.
Scenario is:
In processRequest():
In the processRequest() I'm calling executeQuery() of the Outer Table Only.
(So the Details executeQuery() will be done by VL and Its works fine.)
In processFormRequest():
User opens the details to see the Inner Table.
On some event, I'm executing the Outer Table query.
On some other event, programmatically I am inserting a new row to the Inner Table, and a new row is displayed in the Inner Table as I wanted.
In this way, one row after another, I can add as many rows as I wish, without any problem.
(This scenario should behave as same clicking on button of type "Add-Another-Row", just adding the row automatically)
The code for the inserting (as specified in the chapter "Classic Tables" --> "table-in-table"):
OARow newRow = (OARow) innerRowSet.createRow();
innerRowSet.insertRow(newRow);
innerRowSet.setRangeSize(innerRowSet.getRangeSize()+ 1);
innerRowSet.executeQuery();
If the user won't cause to re-execution of the outer table – no problem occurs.
* Should I add something after the Outer Table VO execution?
* Maybe to the inserting to the Inner Table code?
Please help…

Hi, Thanks.
I don't know which one of the Outer Table rows is the current row,
But-
Only the Details (the Inner Tables) who where opened before the executeQuery() of the Outer table are not acts as they should.
All the Details who where closed before the executeQuery() of the Outer table are still works fine.
Please advise.

Named Query (JOIN query) runs in Toplink JPA but not in EclipseLink

I have a namedquery in JPA entities like (Entities do not include JOIN colums specifically.. no many-to-many or one-to-many relation in entities)
select a from table1 a, table2 b where a.id=b.id
This named query runs on Toplink Essentials without any problem.
When I run this query using EclipseLink
EclipseLink generates the query below and gives an error.
select table1.id, table1.name, table1.surname from table1 t0, table2 t1 where t0.id=t1.id
There are error _"*table1.surname*"_ is invalid identifier. Because; table1 is not define as an alias, must be "t0.surname".
How can I solce this problem.
The code runs on Toplink Essential but not in EclipseLink

I have a namedquery in JPA entities like (Entities do not include JOIN colums specifically.. no many-to-many or one-to-many relation in entities)
select a from table1 a, table2 b where a.id=b.id
This named query runs on Toplink Essentials without any problem.
When I run this query using EclipseLink
EclipseLink generates the query below and gives an error.
select table1.id, table1.name, table1.surname from table1 t0, table2 t1 where t0.id=t1.id
There are error _"*table1.surname*"_ is invalid identifier. Because; table1 is not define as an alias, must be "t0.surname".
How can I solce this problem.
The code runs on Toplink Essential but not in EclipseLink

Initial execution of a workbook/query runs without ending

Similar Messages

Maybe you are looking for