Initialize the PXI 6602 Countercard for DIO Output in CVI

Hey,
can somebody send me a sample program (CVI) for the initialization of the 6602 Countercard??
I want to set a simply pulsetrain.

Hello lai,
if you have installed DAQmx API or Traditional-DAQ API a variety of examples ship with the driver installation. They can be accessed the easiest way through the example browser of CVI. Go to Help >> Find examples and Navigate to: Hardware Input and Output >> DAQmx >> Generating Digital Pulses. Here you will find DigPulseTrain-Cont.prj, which demonstrates, how the device can be configured for continuous pulse train generation (defining frequency, duty cycle, etc.) and could serve as a good point to start from.
If you have any queueries, do not hesitate to contact us again.
Regards,
C.L. - National Instruments Germany GmbH

Similar Messages

Failed to initialize the application 'soa-infra' for SOA suite 11g

Hello experts!
Having followed the steps in http://www.packtpub.com/article/installation-configuration-oracle-soa-suite-11g-1,
upon starting the cmd scripts, I received among others the following error message:
<BEA-149205> <Failed to initialize the application 'soa-infra' due to error java.lang.NoSuchMethodError: weblogic.application.ApplicationLifecycleEvent.getDeploymentOperation()Lweblogic/application/DeploymentOperationType;.
java.lang.NoSuchMethodError: weblogic.application.ApplicationLifecycleEvent.getDeploymentOperation()Lweblogic/application/DeploymentOperationType;
 at oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener.preStart(JpsApplicationLifecycleListener.java:76)
 at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:277)
 at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
 at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
 at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:194)
 at weblogic.application.internal.flow.BaseLifecycleFlow.preStart(BaseLifecycleFlow.java:57)
 at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:279)
 at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:609)
 at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
 at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:185)
 at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:53)
 at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
 at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
 at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
 at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
 at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
 at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
 at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
 at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
 at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
 at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
 at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
 at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
java.lang.NoSuchMethodError:
I have searched but only to find a change permissions hint which did not work for me. SOA 11g - SOA-INFRA is not starting
Any helping hand available?
Thank you very much in advance!
The fuller log follows:
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <WebLogicServer> <Hera> <> <main> <> <> <> <1270482051581> <BEA-000214> <WebLogic Server "soa_server1" version:
WebLogic Server 10.3.1.0 Thu Jun 11 00:26:56 EDT 2009 1227385 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Notice> <Log Management> <Hera> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1270482051644> <BEA-170019> <The server log file C:\Oracle\Middleware\home_11gR1\user_projects\domains\domain1\servers\soa_server1\logs\soa_server1.log is opened. All server side log events will be written to this file.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Log Management> <Hera> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1270482051644> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Diagnostics> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051691> <BEA-320001> <The ServerDebug service initialized successfully.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Store> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051753> <BEA-280050> <Persistent store "WLS_DIAGNOSTICS" opened: directory="C:\Oracle\Middleware\home_11gR1\user_projects\domains\domain1\servers\soa_server1\data\store\diagnostics" writePolicy="Disabled" blockSize=512 directIO=false driver="wlfileio2">
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "t3" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "t3s" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "http" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "https" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "iiop" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "iiops" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "ldap" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "ldaps" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "cluster" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "clusters" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051847> <BEA-002622> <The protocol "snmp" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051847> <BEA-002622> <The protocol "admin" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051847> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <RJVM> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051862> <BEA-000570> <Network Configuration for Channel "soa_server1"
Listen Address :8001
Public Address N/A
Http Enabled true
Tunneling Enabled false
Outbound Enabled false
Admin Traffic Enabled true>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051878> <BEA-002609> <Channel Service initialized.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Socket> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051878> <BEA-000406> <NTSocketMuxer was built on Jan 13 2005 17:47:03
>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Socket> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051941> <BEA-000436> <Allocating 5 reader threads.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Socket> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051942> <BEA-000446> <Native IO Enabled.>
####<5 Απρ 2010 6:40:52 μμ EEST> <Info> <IIOP> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482052098> <BEA-002014> <IIOP subsystem enabled.>
####<5 Απρ 2010 6:40:53 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482053408> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
####<5 Απρ 2010 6:40:53 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482053704> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
####<5 Απρ 2010 6:40:53 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482053751> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_VFJSY8asFO+H8NVntiPFSkiIk0o=>
####<5 Απρ 2010 6:40:53 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482053923> <BEA-090516> <The Authorizer provider has preexisting LDAP data.>
####<5 Απρ 2010 6:40:53 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482053985> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Top".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.DomainRealmScope".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.RegistryScope".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PKITypeScope".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLTypeScope".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLPartner".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Credential".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.CredentialMap".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLEntry".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLAssertingParty".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLRelyingParty".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PasswordCredential".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.UserPasswordCredential".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PasswordCredentialMap".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.ResourceMap".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PKIResourceMap".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSCertRegEntry".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSCredMapCollectionInfo".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSPolicyCollectionInfo".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSRoleCollectionInfo".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLAuthorizationPolicy".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLRoleAssignmentPolicy".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Endpoint".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Partner".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SPPartner".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054048> <BEA-000000> <Parsing class "com.bea.common.security.store.data.IdPPartner".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054048> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SAML2CacheEntry".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054048> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SchemaVersion".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054453> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054469> <BEA-090516> <The RoleMapper provider has preexisting LDAP data.>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054578> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server soa_server1 for security realm myrealm.>
####<5 Απρ 2010 6:40:54 μμ EEST> <Notice> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054578> <BEA-090082> <Security initializing using security realm myrealm.>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054750> <BEA-002622> <The protocol "[snmp, https, t3, cluster-broadcast-secure, ldaps, cluster-broadcast, ldap, http, iiop, admin, t3s, iiops]" is now configured.>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <XML> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054750> <BEA-130036> <Initializing XMLRegistry.>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <messaging.interception> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054765> <BEA-400000> <Initializing message interception service>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <Store> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055015> <BEA-280050> <Persistent store "_WLS_soa_server1" opened: directory="C:\Oracle\Middleware\home_11gR1\user_projects\domains\domain1\servers\soa_server1\data\store\default" writePolicy="Direct-Write" blockSize=512 directIO=true driver="wlfileio2">
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JDBC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055249> <BEA-001135> <Initializing the JDBC service.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JDBC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055249> <BEA-001137> <Initialization complete.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JDBC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055249> <BEA-001138> <Resuming the JDBC service.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JDBC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055249> <BEA-001140> <Resume complete.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <Connector> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055264> <BEA-190000> <Initializing J2EE Connector Service>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <Connector> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055280> <BEA-190001> <J2EE Connector Service initialized successfully>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055327> <BEA-040305> <JMS service is initialized and in standby mode.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055342> <BEA-040090> <Deployed 8 default connection factories.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory2" with its JNDI name "weblogic.jms.XAConnectionFactory2" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "MessageDrivenBeanConnectionFactory" with its JNDI name "weblogic.jms.MessageDrivenBeanConnectionFactory" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "DefaultConnectionFactory" with its JNDI name "weblogic.jms.ConnectionFactory" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "TopicConnectionFactory" with its JNDI name "javax.jms.TopicConnectionFactory" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory" with its JNDI name "weblogic.jms.XAConnectionFactory" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory0" with its JNDI name "weblogic.jms.XAConnectionFactory0" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "QueueConnectionFactory" with its JNDI name "javax.jms.QueueConnectionFactory" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory1" with its JNDI name "weblogic.jms.XAConnectionFactory1" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040306> <JMS service is active now.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <HTTP> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055389> <BEA-101128> <Initializing HTTP services.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <HTTP> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055405> <BEA-101135> <soa_server1 is the default Web server.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <HTTP> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055405> <BEA-101052> <[HttpServer (defaultWebserver) name: soa_server1] Initialized>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <HTTP> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055405> <BEA-101129> <Initializing the Web application container.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: Logging service enabled.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: TC Configuration Helper instantiated!>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: TC Task Manager instantiated!>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: TC security service instantiated!>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: TC Outbound routing service instantiated!>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: TC Transaction service instantiated!>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WebService> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055436> <BEA-220031> <The server does not support reliable SOAP messaging.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WebService> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055436> <BEA-220027> <Web Service reliable agents are started on the server.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMX> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055467> <BEA-149512> <JMX Connector Server started at service:jmx:iiop://192.168.1.2:8001/jndi/weblogic.management.mbeanservers.runtime .>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WebLogicServer> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055483> <BEA-000256> <Invoking oracle.jrf.wls.JRFStartup.main(null)>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WebLogicServer> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055514> <BEA-000256> <Invoking oracle.security.jps.wls.JpsWlsStartupClass.main(null)>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WebLogicServer> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055530> <BEA-000256> <Invoking oracle.core.ojdl.weblogic.ODLConfiguration.main(null)>
####<5 Απρ 2010 6:40:56 μμ EEST> <Info> <WebLogicServer> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482056684> <BEA-000256> <Invoking oracle.jrf.AppContextStartup.main(null)>
####<5 Απρ 2010 6:40:56 μμ EEST> <Info> <WebLogicServer> <Hera> <soa_server1> <[ACTIVE] E

Thank you for your reply!
The tutorial emphasizes that I need jdk 1.6 update 11 in order to setup.
The newer release of wl server comes with jsk 1.6 update 14.
When I tried to run:
setup -jreLoc C:\Oracle\Middleware\home_11gR1\jdk160_14
no setup screen appeared.
Next, I setup stand alone jdk 1.6 update 11 and add it to path,
but setup -jreLoc C:\Program Files\Java\jdk1.6.0_11 failed too, since no setup screen appeared
So I uninstalled version 10.3.2, installed 10.3.1 to follow exactly the tutorial specs.
Does one has to pay oracle consulting, in order to have an installation of soa suite up and running for development?
Edited by: Nick Aiva on Apr 6, 2010 11:27 AM

Is the PXIe-PCIe8361 adequate for this system? And external clock questions...

Hi all,
I have spent some time piecing together a system and I'd like a sanity check before pulling the trigger on this purchase. The system will contain the following hardware:
1. Chassis: PXIe-1078
2. Controller: PXIe-PCIe8361
3. 3 x PXIe-6363 (16 analog inputs each card, 32 digital inputs each card, all internally clocked @ 10kHz)
4. 2 x PXI-6224 (32 digital inputs on one, 8 digital inputs on the other, externally clocked in "bursts" of 62.5khz)
5. Labview software
The three PXI-6363 cards will be responsible for a mix of analog and digital measurements made @ 10 kHz, timed continuously by the onboard clock.
One PXI-6224 will be clocked externally @ 62.5 kHz and will be used to collect digital data on a 32-bit port. These clock pulses will not be continuous, but will occur in bursts lasting for 2ms every 20ms.
The other PXI-6224 will be clocked externally @ 62.5kHz as well and will be used to collect digital data on an 8-bit port. These clock pulses will not be continuous, but will occur in bursts lasting for 2 ms at random intervals.
My questions are:
1. Am I planning anything that looks unreasonable for this hardware?
2. Should I expect issues with data transfer rates with the PXIe-PCIe8361? I will be operating well within the advertised 110MB/s throughput of the device. I plan to stream this method... NI Fast TDMS data streaming
3. I have only ever used NI cards for continuous measurements made by an onboard clock. When I set up a task to collect data that is externally-timed, will the DAQ be expecting a "continuous" clock pulse, or will the system wait patiently for clock pulses to arrive at any rate (any rate within the spec of the card, of course)?
Thanks, any input is appreciated.

Hello LucasH0011
1-As long as you put the PXI-6224 and the PXIe-6363 cards in the corresponding slots, meaning the express(PXIe-6363) in the express and the hybrid(PXI-6224) in the hybrid.
2-I think you would not have issues with the transfer rate.
3-Your timing specifications sound reasonable to me, I think you will be fine.
Here is a document that has useful concepts for the use of cards:
http://www.ni.com/white-paper/3615/en/
It is for the M-Series, but the concepts apply to the X-Series as well.
Regards
Ernesto

Regarding NI PXI-6602 - How to route PFI_33 to a grounded DIO Line.

The PXI-6602 card with the TIO chip seems to be very robust on counter and DIO pin assignments and routing, but I have found that counter 1 has a pin (PFI_33 -AUX IN (UP/DOWN) ) that has been troublesome. I need to either route this pin to another pin such as a DIO pin set as an output and pulled LOW or be able to manipulate the pin to a low state when I setup counter 1. This is to ensure that noise is kept to a minimum due to the PXI-6602 being cabled to a board with a PLD on it. Any solutions on how to tie PFI_33 low?
-Tim

B Spears,
Looks like I'm heading down that path... We were looking to do it in software, but nothing has come to light. Interesting enough, DAQmx has a good sub-vi (DAQmx Connect Terminals.vi) but I am dealing with code back from LABView 5 days utilizing Traditional DAQ. Try writing a snipet utilizing both "Write to DIO.vi" and "DAQmx Connect Terminals.vi" and watch the error codes fly.
One option NI has offered was to re-write the DIO tasking in DAQmx instead of traditional... this maybe an option... but, wow! That's a lot of code.
Thanks for the reply B Spears,
-Tim

PXI 6602 shared DIO Counter lines

Hi,
I have a question regarding the PXI-6602. From the manual I see that some of its PFI channels are shared. If I wanted to use a counter to generate a timed pulse. Can I use the associated gate and source PFI as digital output lines without affecting the counter?
Here's a concrete example: Let's say I'm using the counter 7 to generate a timed pulse on PFI 8 which is the CTR OUT. Can I simultaneously use PFI 10, which is listed in the manual as having possible signals CTR 7 Gate and P0.10, as a digital output? Can I simultaneously use PFI 11, which is listed in the manual as having possible signals CTR 7 Source and P0.11, as a digital output?
Thank you!

Hi,
Take a look at this example related to routing counter signals through the RTSI lines.
http://www.ni.com/example/27109/en/
Reference Table:
http://zone.ni.com/reference/en-XX/help/370466W-01/mxdevconsid/tiosigconcounters/
Luis S
Application Engineer
National Instruments

How can i find out the resolution and accuracy of PXI-6602 module?

I have a 32 bit 8 channel PXI-6602 counter module. PXI card is interfaced to PC with MXI-4 link. How can i find out the resolution and accuracy of this system.What is the maximum accuracy and resolution i will get from this system. Because optical signal to cmos conversion signal is given as a input to the counter.

Hi chandhu,
Were you referring to the accuracy of the count register or the timing clock?
PXI-6602 specifications can be found in the NI 660x Specifications. The resolution of the count register is, as you’ve noted, 32 bits. This corresponds to a maximum count value of 4,294,967,295. As long as all of the edges are in accordance with TTL specifications, the accuracy of the count register is 100%.
On the other hand, the PXI-6602 baseclock accuracy takes on the baseclock accuracy of the PXI CLK 10 signal. Again, this is all found in the specifications.
You may also want to check out the NI 660x User Manual – it contains a lot of details on the operation of these counter/timer devices.
I hope this helps. Please post back if you have further questions.
Ed W.
Applications Engineer
National Instruments

Error when trying to use DO as "open collector" on PXI-6602

When I try to configure a DO of my PXI-6602 as "open collector" I receive the error -200452 ("Measurements: Specified property is not supported by the device or is not applicable to the task."). This is completely mysterious to me since the PXI-6602 should have this feature and my code (see attachment) is practically identical to any of the numerous examples for this topic. Am I overlooking anything really stupid? (LV 8.5, PXI-8145RT) Cheers, uli
Solved!
Go to Solution.
Attachments:
openCollectorTest.vi ‏14 KB

Hi uli,
Did you try setting DO.Tristate while the task is running? There are a few DAQmx devices that do not support setting DO.Tristate while the task is running, but I don't think that the PXI-6602 is among them. I don't have an actual 6602 installed but with a simulated PXI-6602 and DAQmx 8.9, setting DO.Tristate while the task is running does not error.
Using external hardware is perfectly fine, and should also work for timing I/O (whereas using DO.Tristate would only work for single-point digital I/O).
I don't see the text that you quoted in the NI 660x Specifications, so I don't know what context it was in, and apparently it has been reworded since then. Note that devices that support open collector output say "open collector (open-drain)" in their specifications; for an example, see the NI USB-6008/6009 User Guide and Specifications.
Brad
Brad Keryan
NI R&D

PXI 6602 interrupts

I cannot configure a PXI-6602 counter to use Interrupts"
"I am trying to collect data on 4 channels. Each channel uses a counter of the NI-DAQ PXI-6602.
For the first three channels I use DMA by default.
I have added this line of code for the fourth channel which uses counter 3, before I PREPARE & ARM this counter:
Set_DAQ_Device_Info (device,
ND_DATA_XFER_MODE_GPCTR3,
ND_INTERRUPTS);
but I always become a SetupError (-10600)
I've tried several different things, also:
GPCTR_Change_Parameter(device, ND_TRANSFER_MODE, ND_INTERRUPTS);
but it does not work.
I am obviously not setting the last channel to use interrupts correctly. Am I supposed to do something else besides Set_Device_Info? Is ND_PROGRAM initializing
the counter back to use DMA?
Any help?

There is a KnowledgeBase Entry that discusses the problem:
http://digital.ni.com/public.nsf/websearch/540B236C81310B6F862569B5007D5DDC?OpenDocument
So I would recommend to download and install the latest NI-DAQ driver. After that it should work.

PXI 6602 pulsewidth timing?

Using the PXI-6602 with LabView 8.5, is there anyway to get the time of when a pulse occurs? Continuous pulsewidth reading is good, but just need time info also. Essentially we need the function of cont. digital read, which we do on the PXI 6123, but we might run out of channels on that.
Thanks.

Hi Beck,
I would still recommend a period measurement if you are looking for times between rising edges. See the screenshot below from the NI-DAQmx Help which shoes the differences between these counter measurements.
You can then add the period between rising edges from each subsequent an initial timestamp to get the timestamp of when that pulse occurred. This can then be complied into an array which can be written to a file.
Regards,
Kent
Applications Engineer NIC
Message Edited by tnek on 12-11-2008 04:56 PM
Digital Multimeter Home
Attachments:
periodmeasure.png ‏6 KB

Query on NI PXI 6602 Timing I/O Module

How to configure the PXI 6602 Timing I/O module to generate frequency on 8 lines and measure the frequency using the same card?

To me, the pinout is pretty clear so yes, the PFI lines and P1,P2 are related.
I can't advise you whether you should get the board repaired or make do. My concern would be whatever caused the failure of P0 would also cause the failure of whatever port you moved to.
Attachments:
pxi-6220.PNG ‏36 KB

Invoice Split for same customer but for different output types

Hi Gurus,
I have a requirement from the customers. A new output type has to be created with reference to the old type and for this output type a new driver program and SAP script was created with reference to the old one.They wants invoice split to be happened based on item level PO number. That was done successfully.
This invoice split logic was written in the billing routine RV60C901(Customized).
But now they came back with a issue that the invoice split should be done only if they use the new output type but not for the old one. That means for the same customer for one output type invoice split should be done based on item level po number and for one output type it should not. How can this be controlled for a particular
output type?
This output types will not be used in the billing routine as the split happens at the sales order level. Is there any configuration that allows split for a particular output type.
Please suggest me how to proceed???

Hi,
In the invoice split routine check if it is possible to find the output type making use of field symbols.
Just check in debug if the variable for output type is available as follows:-
(Program Name)variable name.
Regads,
Ankur Parab

How do I calculate the max latency of a PXI 8135 (controller) to PXI 6528 (DIO) output?

We are using a PXIe- 8135 Controller and a PXI-6528 DIO module in a PXIe-1082 chassis. We are sending DIO input and output commands using Powershell in Windows 7 on the controller. Due to tight requirements I need to know what is the max latency from when the Powershell command is issued to when the read input or write output command will take place in the DIO I/Os.
If this should be in a different Community Board Location please let me know.
Thanks for the help in advance,
Dan_F

Hello dan_f,
As the latency of Powershell and Windows are not tested, it is hard to determine the latency of your setup. The latency from the PXIe-8135 to the PXI-6528 should be in the realm of nanoseconds. The PXI-6528 does have a couple of latency numbers that can be found within the user manual on Page 24, and they are as follows:
Minimum pulse-width for change detection - 150 µs
Propagation delay - 65 µs, typical
You may be able to do some testing to ballpark the latency of the controller OS/software side of the input/output commands, but depending on how critical this latency is to your measurements, you may want to look into using a real-time OS instead.
Chris H
Applications Engineer
National Instruments

How to structure the DMA buffer for PXie 6341 DAQ card for analog output with different frequencies on each channel

I'm using the MHDDK for analog out/in with the PXIe 6341 DAQ card.
The examples, e.g. aoex5, show a single Timer (outTimerHelper::loadUI method), but the example shows DMA data loaded with the same vector size.
There is a comment in the outTimerHelper:rogramUpdateCount call which implies that different buffer sizes per channel can be used.
(the comment is: Switching between different buffer sizes will not be used)
Does anyone know what the format of the DMA buffer should be for data for multiple channels with different frequencies ?
For example, say we want a0 with a 1Khz Sine wave and a1 with a 1.5Khz sine wave. What does the DMA buffer look like ?
With the same frequency for each channel, the data is interleaved, e.g. (ao0#0, ao1#0; ao0#1, ao1#1, ...), but when the frequencies for each channel is different, what does the buffer look like ?

Hello Kenstern,
The data is always interleaved because each card only has a single timing engine for each subsystem.
For AO you must specify the number of samples that AO will output. You also specify the number of channels. Because there is only one timing engine for AO, each AO will channel will get updated at the same time tick of the update clock. The data will be arranged interleaved exactly as the example shows because each AO channel needs data to output at each tick of the update clock. The data itself can change based on the frequency you want to output.
kenstern wrote:
For example, say we want a0 with a 1Khz Sine wave and a1 with a 1.5Khz sine wave. What does the DMA buffer look like ?
With the same frequency for each channel, the data is interleaved, e.g. (ao0#0, ao1#0; ao0#1, ao1#1, ...), but when the frequencies for each channel is different, what does the buffer look like ?
In your example, you need to come up with an update rate that works for both waveforms (1 KHz and 1.5 KHz sine waves). To get a good representation of a sine wave, you need to update more than 10x as fast as your fastest frequency...I would recommend 100x if possible.
Update Frequency: 150 KHz
Channels: 2
Then you create buffers that include full cycles of each waveform you want to output based on the update frequency. These buffers must also be the same size.
Buffer 1: Contains data for the 1 KHz sine wave, 300 points, 2 sine wave cycles
Buffer 2: Contains data for the 1.5 KHz sine wave, 300 points, 3 sine wave cycles
You then interleave them as before. When the data is run through the ADC, they are outputting different sine waves even though the AO channels are updating at the same rate.

Output the requested delivery date for each different line item

Hello Experts
I have program called ZFSFSF(following), in the output Its showing multiple requested delvery dates per line item.
But We need to show the requested delivery date for each different line item.
Any code is highly appreciated. I wud appreacite if you cud bold the added code.
Thanks
SP
TYPE-POOLS: slis.
TABLES: vbap, vbrk, vbfa, vbak, vbrp, konv, kna1, bkpf, bsad, bkpf_bsad,
knvv, pa0002, t005u, mvke, lips, likp, vbpa, vbep.
DATA: BEGIN OF i_list OCCURS 0,
vbeln LIKE vbak-vbeln,
posnr LIKE vbap-posnr,
matnr LIKE vbap-matnr,
erdat LIKE vbap-erdat,
mvgr1 LIKE mvke-mvgr1,
wadat_ist LIKE likp-wadat_ist,
days TYPE i,
werks LIKE vbap-werks,
lgort LIKE vbap-lgort,
kwmeng LIKE vbap-kwmeng," CH01+
lfimg LIKE lips-lfimg," CH01+
pstyv LIKE vbap-pstyv," CH01+
obd LIKE lips-vbeln," CH01+
obd_pos LIKE lips-posnr," CH01+
soldto LIKE vbaK-kunnr," JR+
shipto LIKE vbpa-kunnr," JR+
edatu like vbep-edatu," PR+
END OF i_list.
DATA: i_list2 LIKE i_list OCCURS 0 WITH HEADER LINE,
i_list3 LIKE i_list OCCURS 0 WITH HEADER LINE.
DATA: i_list4 LIKE vbap OCCURS 0 WITH HEADER LINE.
*ALV Output Header
DATA: gt_list_top_of_page TYPE slis_t_listheader,
prognm LIKE sy-repid,
gc_formname_top_of_page TYPE slis_formname VALUE 'TOP_OF_PAGE',
gt_events TYPE slis_t_event,
is_layout TYPE slis_layout_alv,
is_variant LIKE disvariant,
it_sort TYPE slis_t_sortinfo_alv WITH HEADER LINE.
DATA:gt_fieldcat TYPE slis_t_fieldcat_alv.
DATA:gt_outtab LIKE i_list OCCURS 0 WITH HEADER LINE.
DATA: g_repid LIKE sy-repid,
g_count LIKE sy-tabix.
SELECTION-SCREEN BEGIN OF BLOCK block0 WITH FRAME TITLE text-t01.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(79) text-t10.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(79) text-t11.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(79) text-t12.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN END OF BLOCK block0.
*/ Selection and Input Parameters
SELECTION-SCREEN BEGIN OF BLOCK blocko WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_vbeln FOR vbap-vbeln, "SO
s_auart FOR vbak-auart DEFAULT 'KB' OBLIGATORY,
s_matnr FOR vbap-matnr," obligatory,
s_mvgr1 FOR mvke-mvgr1,
s_erdat FOR vbap-erdat OBLIGATORY,
s_werks FOR vbap-werks,
s_lgort FOR vbap-lgort,
s_edatu FOR vbep-edatu.
PARAMETERS: p_vkorg LIKE vbak-vkorg DEFAULT '5010'.
SELECTION-SCREEN SKIP 2.
+EC1
Addition +EC1
+EC1
PARAMETERS: p_vari LIKE disvariant-variant.
+EC1
End Addition +EC1
+EC1
SELECTION-SCREEN END OF BLOCK blocko.
+EC1
Addition +EC1
+EC1
DATA: g_save(1) TYPE c,
g_default(1) TYPE c,
g_exit(1) TYPE c,
gx_variant LIKE disvariant,
g_variant LIKE disvariant.
+EC1
End Addition +EC1
+EC1
Initialization fieldcatalog
INITIALIZATION.
PERFORM clear_tables.
g_repid = sy-repid.
PERFORM fieldcat_init USING gt_fieldcat[].
+EC1
Addition +EC1
+EC1
g_save = 'A'.
PERFORM variant_init.
Get default variant
gx_variant = g_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = g_save
CHANGING
cs_variant = gx_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 0.
p_vari = gx_variant-variant.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
AT SELECTION-SCREEN.
PERFORM auth_check. "+ESC
PERFORM pai_of_selection_screen.
+EC1
End Addition +EC1
+EC1
START-OF-SELECTION.
PERFORM get_data.
PERFORM alv.
END-OF-SELECTION.
FORM get_data *
FORM get_data.
*CH01 - Added kwmeng(order qty) to selection, excluded rejects
*JR -added soldto and shipto code
SELECT avbeln aposnr amatnr aerdat awerks algort
akwmeng apstyv bkunnr cedatu
CH01+
INTO
(i_list-vbeln, i_list-posnr, i_list-matnr, i_list-erdat, i_list-werks,
i_list-lgort,
i_list-kwmeng , i_list-pstyv, i_list-soldto,i_list-edatu)
CH01+
FROM vbap AS a INNER JOIN vbak AS b ON avbeln = bvbeln
INNER JOIN vbep AS c ON avbeln = cvbeln
WHERE b~vkorg = p_vkorg
AND a~werks IN s_werks
AND a~lgort IN s_lgort
AND b~auart IN s_auart
AND a~vbeln IN s_vbeln
AND a~erdat IN s_erdat
AND a~abgru = ''" CH01+
AND a~matnr IN s_matnr
AND c~edatu IN s_edatu.
APPEND i_list.
ENDSELECT.
COMMIT WORK AND WAIT.
LOOP AT i_list.
SELECT SINGLE mvgr1 INTO i_list-mvgr1 FROM mvke
WHERE matnr = i_list-matnr.
MODIFY i_list.
CLEAR: i_list.
ENDLOOP.
COMMIT WORK AND WAIT.
LOOP AT i_list.
IF i_list-mvgr1 IN s_mvgr1.
CONTINUE.
ELSE.
DELETE i_list.
COMMIT WORK AND WAIT.
ENDIF.
ENDLOOP.
CH01 - commented these lines out and redid logic below
LOOP AT i_list.
select single vbeln into lips-vbeln from lips
where vgbel = i_list-vbeln
and vgpos = i_list-posnr.
select single wadat_ist into i_list-wadat_ist from likp
where vbeln = lips-vbeln.
SELECT b~wadat_ist INTO i_list-wadat_ist
FROM lips AS a INNER JOIN
likp AS b ON avbeln = bvbeln WHERE a~vgbel = i_list-vbeln
AND a~vgpos = i_list-posnr.
MODIFY i_list.
CLEAR: i_list, lips-vbeln.
ENDSELECT.
ENDLOOP.
CH01 - Changed to select multiple delivery lines & del qty
summing the total deliveries per OBD# and date
LOOP AT i_list.
SELECT avbeln sum( alfimg ) b~wadat_ist
INTO (i_list-obd , i_list-lfimg , i_list-wadat_ist)
FROM lips AS a INNER JOIN
likp AS b ON avbeln = bvbeln WHERE a~vgbel = i_list-vbeln
AND a~vgpos = i_list-posnr
AND a~pstyv = i_list-pstyv
group by avbeln bwadat_ist.
i_list2 = i_list.
APPEND i_list2.
ENDSELECT.
IF sy-subrc <> 0.
i_list2 = i_list.
APPEND i_list2.
ENDIF.
ENDLOOP.
i_list[] = i_list2[].
*End CH01
COMMIT WORK AND WAIT.
LOOP AT i_list.
IF i_list-wadat_ist IS INITIAL.
CONTINUE.
ELSE.
i_list-days = i_list-wadat_ist - i_list-erdat.
ENDIF.
MODIFY i_list.
CLEAR: i_list.
COMMIT WORK AND WAIT.
ENDLOOP.
COMMIT WORK AND WAIT.
LOOP AT i_list.
IF i_list-vbeln IS INITIAL.
DELETE i_list.
ENDIF.
ENDLOOP.
COMMIT WORK AND WAIT.
*JR
LOOP AT i_list.
SELECT SINGLE KUNNR INTO i_list-shipto FROM vbpa
WHERE vbeln = i_list-vbeln
AND parvw = 'WE'.
MODIFY i_list.
ENDLOOP.
*END JR
gt_outtab[] = i_list[].
COMMIT WORK AND WAIT.
ENDFORM.
FORM alv *
FORM alv.
PERFORM e03_eventtab_build USING gt_events[]. "+EC1
PERFORM e04_comment_build USING gt_list_top_of_page[]. "+EC1
prognm = sy-repid. "+EC1
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_user_command = 'USER_COMMAND'
i_callback_program = g_repid
it_fieldcat = gt_fieldcat[]
it_events = gt_events[] "+ESC
it_sort = it_sort[]
+EC1
Addition +EC1
+EC1
is_variant = g_variant
i_save = g_save
+EC1
End Addition +EC1
+EC1
TABLES
t_outtab = gt_outtab.
COMMIT WORK AND WAIT.
ENDFORM.
FORM fieldcat_init *
--> I_FIELDCAT *
FORM fieldcat_init
USING i_fieldcat TYPE slis_t_fieldcat_alv.
DATA: ls_fieldcat TYPE slis_fieldcat_alv.
DATA: pos TYPE i VALUE 1.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'VBELN'.
ls_fieldcat-ref_tabname = 'VBAK'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'POSNR'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'MATNR'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'MVGR1'.
ls_fieldcat-ref_tabname = 'MVKE'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'WERKS'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'LGORT'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'ERDAT'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'WADAT_IST'.
ls_fieldcat-ref_tabname = 'LIKP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'DAYS'.
ls_fieldcat-ref_fieldname = 'DAYS'.
ls_fieldcat-seltext_s = '# Of Days'.
ls_fieldcat-seltext_m = '# Of Days'.
ls_fieldcat-seltext_l = '# Of Days'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
*Begin CH01
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'KWMENG'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-outputlen = 7.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'LFIMG'.
ls_fieldcat-ref_tabname = 'LIPS'.
ls_fieldcat-outputlen = 7.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'OBD'.
ls_fieldcat-seltext_s = 'OBD'.
ls_fieldcat-seltext_m = 'Outbound Del'.
ls_fieldcat-seltext_l = 'Outbound Delivery'.
ls_fieldcat-outputlen = 10.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'OBD_POS'.
ls_fieldcat-seltext_s = 'OBD Ln'.
ls_fieldcat-seltext_m = 'Outbound Del Ln'.
ls_fieldcat-seltext_l = 'Outbound Del Line'.
ls_fieldcat-outputlen = 10.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
*End CH01
*JR
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'SOLDTO'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-seltext_m = 'Sold To'.
ls_fieldcat-seltext_l = 'Sold To'.
ls_fieldcat-outputlen = 10.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'SHIPTO'.
ls_fieldcat-ref_tabname = 'VBPA'.
ls_fieldcat-seltext_m = 'Ship To'.
ls_fieldcat-seltext_l = 'Ship To'.
ls_fieldcat-outputlen = 10.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
*END JR
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'EDATU'.
ls_fieldcat-ref_tabname = 'VBEP'.
ls_fieldcat-seltext_m = 'Requested Delivery date'.
ls_fieldcat-seltext_l = 'Requested Delivery date'.
ls_fieldcat-outputlen = 20.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
*FOR ALV SORT & SUBTOTAL
CLEAR it_sort.
it_sort-spos = '0'.
it_sort-fieldname = 'VBELN'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '1'.
it_sort-fieldname = 'POSNR'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '2'.
it_sort-fieldname = 'MATNR'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '3'.
it_sort-fieldname = 'MVGR1'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '4'.
it_sort-fieldname = 'ERDAT'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '5'.
it_sort-fieldname = 'WADAT_IST'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-down = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '6'.
it_sort-fieldname = 'PERNR'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '7'.
it_sort-fieldname = 'VORNA'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '8'.
it_sort-fieldname = 'NACHN'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '9'.
it_sort-fieldname = 'VKGRP'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '10'.
it_sort-fieldname = 'VBELN'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '11'.
it_sort-fieldname = 'ERDAT'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '12'.
it_sort-fieldname = 'BEZEI'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
clear it_sort.
it_sort-spos = '1'.
it_sort-fieldname = 'BELNR'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
append it_sort.
ENDFORM.
+EC1
Addition +EC1
+EC1
*& Form VARIANT_INIT
text
--> p1 text
<-- p2 text
FORM variant_init.
CLEAR g_variant.
g_variant-report = g_repid.
ENDFORM. " VARIANT_INIT
FORM f4_for_variant *
FORM f4_for_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = g_variant
i_save = g_save
it_default_fieldcat =
IMPORTING
e_exit = g_exit
es_variant = gx_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 2.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
IF g_exit = space.
p_vari = gx_variant-variant.
ENDIF.
ENDIF.
ENDFORM.
*& Form PAI_OF_SELECTION_SCREEN
text
FORM pai_of_selection_screen.
IF NOT p_vari IS INITIAL.
MOVE g_variant TO gx_variant.
MOVE p_vari TO gx_variant-variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
EXPORTING
i_save = g_save
CHANGING
cs_variant = gx_variant.
g_variant = gx_variant.
ELSE.
PERFORM variant_init.
ENDIF.
ENDFORM. " PAI_OF_SELECTION_SCREEN
+EC1
End Addition +EC1
+EC1
FORM e03_eventtab_build *
--> E03_LT_EVENTS *
FORM e03_eventtab_build USING e03_lt_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = e03_lt_events.
READ TABLE e03_lt_events WITH KEY name = slis_ev_top_of_page
INTO ls_event.
IF sy-subrc = 0.
MOVE gc_formname_top_of_page TO ls_event-form.
APPEND ls_event TO e03_lt_events.
ENDIF.
ENDFORM.
FORM e04_comment_build *
--> E04_LT_TOP_OF_PAGE *
FORM e04_comment_build USING e04_lt_top_of_page TYPE slis_t_listheader.
DATA: ls_line TYPE slis_listheader.
*Report Title
CLEAR ls_line.
ls_line-typ = 'H'.
ls_line-info = text-007.
APPEND ls_line TO e04_lt_top_of_page.
**Doc Type Desc.
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = text-008.
ls_line-info = p_matnr.
append ls_line to e04_lt_top_of_page.
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = text-009.
ls_line-info = p_werks.
append ls_line to e04_lt_top_of_page.
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = text-010.
ls_line-info = p_stlan.
append ls_line to e04_lt_top_of_page.
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = text-011.
ls_line-info = p_stlal.
append ls_line to e04_lt_top_of_page.
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = text-012.
ls_line-info = p_stlal.
append ls_line to e04_lt_top_of_page.
ENDFORM.
FORM top_of_page *
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = gt_list_top_of_page.
ENDFORM.
FORM auth_check *
FORM auth_check.
AUTHORITY-CHECK OBJECT 'V_VBAK_VKO'
ID 'VKORG' FIELD p_vkorg.
IF sy-subrc NE 0.
MESSAGE e054 WITH p_vkorg.
ENDIF.
ENDFORM. " auth_check
*& Form USER_COMMAND
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE r_ucomm.
WHEN '&IC1'.
PERFORM display_so_order USING r_ucomm
rs_selfield.
ENDCASE.
ENDFORM.
*& Form display_sales_order
text
-->P_R_UCOMM text
-->P_RS_SELFIELD text
FORM display_so_order USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE rs_selfield-sel_tab_field.
WHEN '1-VBELN'.
SET PARAMETER ID 'AUN' FIELD rs_selfield-value.
CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
WHEN '1-MATNR'.
SET PARAMETER ID 'MAT' FIELD rs_selfield-value.
CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
WHEN '1-OBD'.
SET PARAMETER ID 'VL' FIELD rs_selfield-value.
CALL TRANSACTION 'VL03N' AND SKIP FIRST SCREEN.
WHEN OTHERS.
MESSAGE i000(z1) WITH 'Please Click on the Valid Selection'.
EXIT.
ENDCASE.
ENDFORM. " display_sales_order
FORM EDit_table *

> TYPE-POOLS: slis.
>
> TABLES: vbap, vbrk, vbfa, vbak, vbrp, konv, kna1,
> bkpf, bsad, bkpf_bsad,
> knvv, pa0002, t005u, mvke, lips, likp, vbpa, vbep.
>
> DATA: BEGIN OF i_list OCCURS 0,
> vbeln LIKE vbak-vbeln,
> posnr LIKE vbap-posnr,
 etenr like vbep-etenr,
> matnr LIKE vbap-matnr,
> erdat LIKE vbap-erdat,
> mvgr1 LIKE mvke-mvgr1,
> wadat_ist LIKE likp-wadat_ist,
> days TYPE i,
> werks LIKE vbap-werks,
> lgort LIKE vbap-lgort,
> kwmeng LIKE vbap-kwmeng," CH01+
> lfimg LIKE lips-lfimg," CH01+
> pstyv LIKE vbap-pstyv," CH01+
> obd LIKE lips-vbeln," CH01+
> obd_pos LIKE lips-posnr," CH01+
> soldto LIKE vbaK-kunnr," JR+
> shipto LIKE vbpa-kunnr," JR+
> edatu like vbep-edatu," PR+
> END OF i_list.
>
> DATA: i_list2 LIKE i_list OCCURS 0 WITH HEADER LINE,
> i_list3 LIKE i_list OCCURS 0 WITH HEADER LINE.
>
> DATA: i_list4 LIKE vbap OCCURS 0 WITH HEADER LINE.
>
>
> *ALV Output Header
> DATA: gt_list_top_of_page TYPE slis_t_listheader,
> prognm LIKE sy-repid,
> gc_formname_top_of_page TYPE slis_formname VALUE
> 'TOP_OF_PAGE',
> gt_events TYPE slis_t_event,
> is_layout TYPE slis_layout_alv,
> is_variant LIKE disvariant,
> it_sort TYPE slis_t_sortinfo_alv WITH HEADER LINE.
>
> DATA:gt_fieldcat TYPE slis_t_fieldcat_alv.
> DATA:gt_outtab LIKE i_list OCCURS 0 WITH HEADER
> LINE.
>
> DATA: g_repid LIKE sy-repid,
> g_count LIKE sy-tabix.
>
> SELECTION-SCREEN BEGIN OF BLOCK block0 WITH FRAME
> TITLE text-t01.
>
> SELECTION-SCREEN: BEGIN OF LINE.
> SELECTION-SCREEN COMMENT 1(79) text-t10.
>
> SELECTION-SCREEN: END OF LINE.
>
> SELECTION-SCREEN: BEGIN OF LINE.
> SELECTION-SCREEN COMMENT 1(79) text-t11.
> SELECTION-SCREEN: END OF LINE.
>
> SELECTION-SCREEN: BEGIN OF LINE.
> SELECTION-SCREEN COMMENT 1(79) text-t12.
> SELECTION-SCREEN: END OF LINE.
>
> SELECTION-SCREEN END OF BLOCK block0.
>
> */ Selection and Input Parameters
> SELECTION-SCREEN BEGIN OF BLOCK blocko WITH FRAME
> TITLE text-001.
>
>
>
> SELECT-OPTIONS: s_vbeln FOR vbap-vbeln, "SO
> s_auart FOR vbak-auart DEFAULT 'KB' OBLIGATORY,
> s_matnr FOR vbap-matnr," obligatory,
> s_mvgr1 FOR mvke-mvgr1,
> s_erdat FOR vbap-erdat OBLIGATORY,
> s_werks FOR vbap-werks,
> s_lgort FOR vbap-lgort,
> s_edatu FOR vbep-edatu.
>
> PARAMETERS: p_vkorg LIKE vbak-vkorg DEFAULT '5010'.
>
>
>
> SELECTION-SCREEN SKIP 2.
> *----
> -
+EC1
> * Addition +EC1
> *----
> -
+EC1
> PARAMETERS: p_vari LIKE disvariant-variant.
> *----
> -
+EC1
> * End Addition +EC1
> *----
> -
+EC1
> SELECTION-SCREEN END OF BLOCK blocko.
>
> *----
> -
+EC1
> * Addition +EC1
> *----
> -
+EC1
> DATA: g_save(1) TYPE c,
> * g_default(1) TYPE c,
> g_exit(1) TYPE c,
> gx_variant LIKE disvariant,
> g_variant LIKE disvariant.
> *----
> -
+EC1
> * End Addition +EC1
> *----
> -
+EC1
>
> * Initialization fieldcatalog
> INITIALIZATION.
>
> * PERFORM clear_tables.
>
> g_repid = sy-repid.
> PERFORM fieldcat_init USING gt_fieldcat[].
> *----
> -
+EC1
> * Addition +EC1
> *----
> -
+EC1
> g_save = 'A'.
> PERFORM variant_init.
> * Get default variant
> gx_variant = g_variant.
> CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
> EXPORTING
> i_save = g_save
> CHANGING
> cs_variant = gx_variant
> EXCEPTIONS
> not_found = 2.
> IF sy-subrc = 0.
> p_vari = gx_variant-variant.
> ENDIF.
>
> AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
> PERFORM f4_for_variant.
>
> AT SELECTION-SCREEN.
> PERFORM auth_check. "+ESC
> PERFORM pai_of_selection_screen.
>
>
>
> *----
> -
+EC1
> * End Addition +EC1
> *----
> -
+EC1
>
>
> START-OF-SELECTION.
>
> PERFORM get_data.
>
> PERFORM alv.
>
> END-OF-SELECTION.
>
> *----
> -
> * FORM get_data *
> *----
> -
> * ........ *
> *----
> -
> FORM get_data.
> *CH01 - Added kwmeng(order qty) to selection,
> excluded rejects
> *JR -added soldto and shipto code
SELECT a~vbeln a~posnr a~matnr a~erdat a~werks a~lgort
a~kwmeng a~pstyv b~kunnr c~edatu
CH01+
INTO corresponding fields of table i_list
FROM vbap AS a INNER JOIN vbak AS b ON a~vbeln = b~vbeln
INNER JOIN vbep AS c ON a~vbeln = c~vbeln
and a~posnr = c~posnr
WHERE b~vkorg = p_vkorg
AND a~werks IN s_werks
AND a~lgort IN s_lgort
AND b~auart IN s_auart
AND a~vbeln IN s_vbeln
AND a~erdat IN s_erdat
AND a~abgru = ''" CH01+
AND a~matnr IN s_matnr
AND c~edatu IN s_edatu.
> COMMIT WORK AND WAIT.
>
> LOOP AT i_list.
> SELECT SINGLE mvgr1 INTO i_list-mvgr1 FROM mvke
> WHERE matnr = i_list-matnr.
> MODIFY i_list.
> CLEAR: i_list.
> ENDLOOP.
> COMMIT WORK AND WAIT.
>
> LOOP AT i_list.
> IF i_list-mvgr1 IN s_mvgr1.
> CONTINUE.
> ELSE.
> DELETE i_list.
> COMMIT WORK AND WAIT.
> ENDIF.
> ENDLOOP.
> * CH01 - commented these lines out and redid logic
> below
> * LOOP AT i_list.
> ** select single vbeln into lips-vbeln from lips
> ** where vgbel = i_list-vbeln
> ** and vgpos = i_list-posnr.
> **
> ** select single wadat_ist into i_list-wadat_ist from
> likp
> ** where vbeln = lips-vbeln.
> *
> * SELECT b~wadat_ist INTO i_list-wadat_ist
> * FROM lips AS a INNER JOIN
> * likp AS b ON a~vbeln = b~vbeln WHERE a~vgbel =
> i_list-vbeln
> * AND a~vgpos = i_list-posnr.
> * MODIFY i_list.
> * CLEAR: i_list, lips-vbeln.
> * ENDSELECT.
> * ENDLOOP.
>
> * CH01 - Changed to select multiple delivery lines &
> del qty
> * summing the total deliveries per OBD# and date
> LOOP AT i_list.
> SELECT avbeln sum( alfimg ) b~wadat_ist
> INTO (i_list-obd , i_list-lfimg , i_list-wadat_ist)
> FROM lips AS a INNER JOIN
> likp AS b ON avbeln = bvbeln WHERE a~vgbel =
> i_list-vbeln
> AND a~vgpos = i_list-posnr
> AND a~pstyv = i_list-pstyv
> group by avbeln bwadat_ist.
> i_list2 = i_list.
> APPEND i_list2.
> ENDSELECT.
> IF sy-subrc <> 0.
> i_list2 = i_list.
> APPEND i_list2.
> ENDIF.
> ENDLOOP.
> i_list[] = i_list2[].
> *End CH01
>
> COMMIT WORK AND WAIT.
>
> LOOP AT i_list.
> IF i_list-wadat_ist IS INITIAL.
> CONTINUE.
> ELSE.
> i_list-days = i_list-wadat_ist - i_list-erdat.
> ENDIF.
> MODIFY i_list.
> CLEAR: i_list.
> COMMIT WORK AND WAIT.
> ENDLOOP.
>
> COMMIT WORK AND WAIT.
>
> LOOP AT i_list.
> IF i_list-vbeln IS INITIAL.
> DELETE i_list.
> ENDIF.
> ENDLOOP.
> COMMIT WORK AND WAIT.
>
> *JR
> LOOP AT i_list.
> SELECT SINGLE KUNNR INTO i_list-shipto FROM vbpa
> WHERE vbeln = i_list-vbeln
> AND parvw = 'WE'.
> MODIFY i_list.
> ENDLOOP.
> *END JR
>
> gt_outtab[] = i_list[].
> COMMIT WORK AND WAIT.
>
>
> ENDFORM.
>
> *----
> -
> * FORM alv *
> *----
> -
> * ........ *
> *----
> -
> FORM alv.
>
> PERFORM e03_eventtab_build USING gt_events[]. "+EC1
> PERFORM e04_comment_build USING
> gt_list_top_of_page[]. "+EC1
> prognm = sy-repid. "+EC1
>
>
> CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
> EXPORTING
> i_callback_user_command = 'USER_COMMAND'
> i_callback_program = g_repid
> it_fieldcat = gt_fieldcat[]
> it_events = gt_events[] "+ESC
> it_sort = it_sort[]
> *----
> -
+EC1
> * Addition +EC1
> *----
> -
+EC1
> is_variant = g_variant
> i_save = g_save
> *----
> -
+EC1
> * End Addition +EC1
> *----
> -
+EC1
> TABLES
> t_outtab = gt_outtab.
>
> COMMIT WORK AND WAIT.
>
>
> ENDFORM.
>
>
> *----
> -
> * FORM fieldcat_init *
> *----
> -
> * ........ *
> *----
> -
> * --> I_FIELDCAT *
> *----
> -
> FORM fieldcat_init
> USING i_fieldcat TYPE slis_t_fieldcat_alv.
> DATA: ls_fieldcat TYPE slis_fieldcat_alv.
> DATA: pos TYPE i VALUE 1.
> CLEAR ls_fieldcat.
Please note to keep on incrementing pos variable for column position.
 pos = pos + 1.
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'VBELN'.
> ls_fieldcat-ref_tabname = 'VBAK'.
> ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
 pos = pos + 1. ===> after every append to field catalog.
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'POSNR'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'ETERN'.
> ls_fieldcat-ref_tabname = 'VBEP'.
> ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'MATNR'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'MVGR1'.
> ls_fieldcat-ref_tabname = 'MVKE'.
> ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'WERKS'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> * ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'LGORT'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> * ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'ERDAT'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> * ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'WADAT_IST'.
> ls_fieldcat-ref_tabname = 'LIKP'.
> * ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'DAYS'.
> ls_fieldcat-ref_fieldname = 'DAYS'.
> ls_fieldcat-seltext_s = '# Of Days'.
> ls_fieldcat-seltext_m = '# Of Days'.
> ls_fieldcat-seltext_l = '# Of Days'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> *Begin CH01
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'KWMENG'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> ls_fieldcat-outputlen = 7.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'LFIMG'.
> ls_fieldcat-ref_tabname = 'LIPS'.
> ls_fieldcat-outputlen = 7.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'OBD'.
> ls_fieldcat-seltext_s = 'OBD'.
> ls_fieldcat-seltext_m = 'Outbound Del'.
> ls_fieldcat-seltext_l = 'Outbound Delivery'.
> ls_fieldcat-outputlen = 10.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> * ls_fieldcat-col_pos = pos.
> * ls_fieldcat-fieldname = 'OBD_POS'.
> * ls_fieldcat-seltext_s = 'OBD Ln'.
> * ls_fieldcat-seltext_m = 'Outbound Del Ln'.
> * ls_fieldcat-seltext_l = 'Outbound Del Line'.
> * ls_fieldcat-outputlen = 10.
> * APPEND ls_fieldcat TO i_fieldcat.
> * CLEAR ls_fieldcat.
> *
> *End CH01
>
> *JR
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'SOLDTO'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> ls_fieldcat-seltext_m = 'Sold To'.
> ls_fieldcat-seltext_l = 'Sold To'.
> ls_fieldcat-outputlen = 10.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'SHIPTO'.
> ls_fieldcat-ref_tabname = 'VBPA'.
> ls_fieldcat-seltext_m = 'Ship To'.
> ls_fieldcat-seltext_l = 'Ship To'.
> ls_fieldcat-outputlen = 10.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
> *END JR
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'EDATU'.
> ls_fieldcat-ref_tabname = 'VBEP'.
> ls_fieldcat-seltext_m = 'Requested Delivery date'.
> ls_fieldcat-seltext_l = 'Requested Delivery date'.
> ls_fieldcat-outputlen = 20.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
>
> *FOR ALV SORT & SUBTOTAL
> CLEAR it_sort.
> it_sort-spos = '0'.
> it_sort-fieldname = 'VBELN'.
> it_sort-tabname = 'GT_OUTTAB'.
> it_sort-up = 'X'.
> * it_sort-subtot = 'X'.
> APPEND it_sort.
>
> CLEAR it_sort.
> it_sort-spos = '1'.
> it_sort-fieldname = 'POSNR'.
> it_sort-tabname = 'GT_OUTTAB'.
> it_sort-up = 'X'.
> it_sort-subtot = 'X'.
> * it_sort-subtot = 'X'.
> APPEND it_sort.
> *
> CLEAR it_sort.
> it_sort-spos = '2'.
> it_sort-fieldname = 'MATNR'.
> it_sort-tabname = 'GT_OUTTAB'.
> it_sort-up = 'X'.
> * it_sort-subtot = 'X'.
> APPEND it_sort.
>
> CLEAR it_sort.
> it_sort-spos = '3'.
> it_sort-fieldname = 'MVGR1'.
> it_sort-tabname = 'GT_OUTTAB'.
> it_sort-up = 'X'.
> * it_sort-subtot = 'X'.
> APPEND it_sort.
> *
> CLEAR it_sort.
> it_sort-spos = '4'.
> it_sort-fieldname = 'ERDAT'.
> it_sort-tabname = 'GT_OUTTAB'.
> it_sort-up = 'X'.
> * it_sort-subtot = 'X'.
> APPEND it_sort.
>
>
> CLEAR it_sort.
> it_sort-spos = '5'.
> it_sort-fieldname = 'WADAT_IST'.
> it_sort-tabname = 'GT_OUTTAB'.
> it_sort-down = 'X'.
> * it_sort-subtot = 'X'.
> APPEND it_sort.
>
> *
> * CLEAR it_sort.
> * it_sort-spos = '6'.
> * it_sort-fieldname = 'PERNR'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
> *
> * CLEAR it_sort.
> * it_sort-spos = '7'.
> * it_sort-fieldname = 'VORNA'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
> * CLEAR it_sort.
> * it_sort-spos = '8'.
> * it_sort-fieldname = 'NACHN'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
> * CLEAR it_sort.
> * it_sort-spos = '9'.
> * it_sort-fieldname = 'VKGRP'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
> * CLEAR it_sort.
> * it_sort-spos = '10'.
> * it_sort-fieldname = 'VBELN'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
> * CLEAR it_sort.
> * it_sort-spos = '11'.
> * it_sort-fieldname = 'ERDAT'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
> * CLEAR it_sort.
> * it_sort-spos = '12'.
> * it_sort-fieldname = 'BEZEI'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
>
> * clear it_sort.
> * it_sort-spos = '1'.
> * it_sort-fieldname = 'BELNR'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> * append it_sort.
>
>
> ENDFORM.
>
> *----
> -
+EC1
> * Addition +EC1
> *----
> -
+EC1
> *&----
> -
> *& Form VARIANT_INIT
> *&----
> -
> * text
> *----
> -
> * --> p1 text
> * <-- p2 text
> *----
> -
> FORM variant_init.
> *
> CLEAR g_variant.
> g_variant-report = g_repid.
> ENDFORM. " VARIANT_INIT
>
>
>
> *----
> -
> * FORM f4_for_variant *
> *----
> -
> * ........ *
> *----
> -
> FORM f4_for_variant.
> *
> CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
> EXPORTING
> is_variant = g_variant
> i_save = g_save
> * it_default_fieldcat =
> IMPORTING
> e_exit = g_exit
> es_variant = gx_variant
> EXCEPTIONS
> not_found = 2.
> IF sy-subrc = 2.
> MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
> WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
> ELSE.
> IF g_exit = space.
> p_vari = gx_variant-variant.
> ENDIF.
> ENDIF.
> ENDFORM.
> *&----
> -
> *& Form PAI_OF_SELECTION_SCREEN
> *&----
> -
> * text
> *----
> -
> FORM pai_of_selection_screen.
> *
> IF NOT p_vari IS INITIAL.
> MOVE g_variant TO gx_variant.
> MOVE p_vari TO gx_variant-variant.
> CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
> EXPORTING
> i_save = g_save
> CHANGING
> cs_variant = gx_variant.
> g_variant = gx_variant.
> ELSE.
> PERFORM variant_init.
> ENDIF.
> ENDFORM. " PAI_OF_SELECTION_SCREEN
> *----
> -
+EC1
> * End Addition +EC1
> *----
> -
+EC1
>
>
> *----
> -
> * FORM e03_eventtab_build *
> *----
> -
> * ........ *
> *----
> -
> * --> E03_LT_EVENTS *
> *----
> -
> FORM e03_eventtab_build USING e03_lt_events TYPE
> slis_t_event.
> DATA: ls_event TYPE slis_alv_event.
>
> CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
> EXPORTING
> i_list_type = 0
> IMPORTING
> et_events = e03_lt_events.
> READ TABLE e03_lt_events WITH KEY name =
> slis_ev_top_of_page
> INTO ls_event.
> IF sy-subrc = 0.
> MOVE gc_formname_top_of_page TO ls_event-form.
> APPEND ls_event TO e03_lt_events.
> ENDIF.
> ENDFORM.
>
> *----
> -
> * FORM e04_comment_build *
> *----
> -
> * ........ *
> *----
> -
> * --> E04_LT_TOP_OF_PAGE *
> *----
> -
> FORM e04_comment_build USING e04_lt_top_of_page TYPE
> slis_t_listheader.
> DATA: ls_line TYPE slis_listheader.
>
> *Report Title
> CLEAR ls_line.
> ls_line-typ = 'H'.
> ls_line-info = text-007.
> APPEND ls_line TO e04_lt_top_of_page.
> *
> *
> **Doc Type Desc.
> * clear ls_line.
> * ls_line-typ = 'S'.
> * ls_line-key = text-008.
> ** ls_line-info = p_matnr.
> * append ls_line to e04_lt_top_of_page.
> *
> * clear ls_line.
> * ls_line-typ = 'S'.
> * ls_line-key = text-009.
> ** ls_line-info = p_werks.
> * append ls_line to e04_lt_top_of_page.
> *
> *
> * clear ls_line.
> * ls_line-typ = 'S'.
> * ls_line-key = text-010.
> ** ls_line-info = p_stlan.
> * append ls_line to e04_lt_top_of_page.
> *
> * clear ls_line.
> * ls_line-typ = 'S'.
> * ls_line-key = text-011.
> ** ls_line-info = p_stlal.
> * append ls_line to e04_lt_top_of_page.
> *
> * clear ls_line.
> * ls_line-typ = 'S'.
> * ls_line-key = text-012.
> ** ls_line-info = p_stlal.
> * append ls_line to e04_lt_top_of_page.
>
>
>
> ENDFORM.
>
> *----
> -
> * FORM top_of_page *
> *----
> -
> * ........ *
> *----
> -
> FORM top_of_page.
>
> CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
> EXPORTING
> it_list_commentary = gt_list_top_of_page.
>
>
> ENDFORM.
>
> *----
> -
> * FORM auth_check *
> *----
> -
> * ........ *
> *----
> -
> FORM auth_check.
>
> AUTHORITY-CHECK OBJECT 'V_VBAK_VKO'
> ID 'VKORG' FIELD p_vkorg.
> IF sy-subrc NE 0.
> MESSAGE e054 WITH p_vkorg.
> ENDIF.
>
>
> ENDFORM. " auth_check
>
>
> *&----
> -
> *& Form USER_COMMAND
> *&----
> -
> FORM user_command USING r_ucomm LIKE sy-ucomm
> rs_selfield TYPE slis_selfield.
>
> CASE r_ucomm.
> WHEN '&IC1'.
> PERFORM display_so_order USING r_ucomm
> rs_selfield.
>
> ENDCASE.
>
> ENDFORM.
>
> *&----
> -
> *& Form display_sales_order
> *&----
> -
> * text
> *----
> -
> * -->P_R_UCOMM text
> * -->P_RS_SELFIELD text
> *----
> -
> FORM display_so_order USING r_ucomm LIKE sy-ucomm
> rs_selfield TYPE slis_selfield.
>
> CASE rs_selfield-sel_tab_field.
> WHEN '1-VBELN'.
> SET PARAMETER ID 'AUN' FIELD rs_selfield-value.
> CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
> WHEN '1-MATNR'.
> SET PARAMETER ID 'MAT' FIELD rs_selfield-value.
> CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
> WHEN '1-OBD'.
> SET PARAMETER ID 'VL' FIELD rs_selfield-value.
> CALL TRANSACTION 'VL03N' AND SKIP FIRST SCREEN.
> WHEN OTHERS.
> MESSAGE i000(z1) WITH 'Please Click on the Valid
> Selection'.
> EXIT.
> ENDCASE.
>
>
> ENDFORM. " display_sales_order
>
> *----
> -
> * FORM EDit_table *
> *----
> -
> * ........ *
> *----
> -
Message was edited by: Anurag Bankley

How do I program a NI 6602 card to send trigger pulses, one at each output port, triggered by an input trigger signal, using only one counter for each output port?

Hello,
I have managed to program a NI 6602 card in LabView to send pulses on three different output ports, one pulse on each output port (with individually chosen delays) for each input trigger pulse coming on a separate input port. It is the DAQmx Create Channel (CO-Pulse Generation-Time)-VI that I have used for this, see attached code. However, this VI controls both pulse delay and pulse width, and therefore uses two counters for each output port (although you only specify one counter in the VI input signals), as I understand.
In my application though, I only need to have the delay chosen, the pulse width can be arbitrarily short, and thus I should only need one counter for each output port. How do I accomplish to program this in LabView?
Best regards,
Claes
Attachments:
Configure Side Camera Flash 1 Triggering.vi ‏47 KB

Well you're welcome to do that--it will work just fine as long as you are configuring a start trigger.
<rant>
However, personally I really don't like putting multiple counter outputs in the same task. I have seen so many people assume that the counter outputs would be synchronized due to having them in the same task when this is not the case (you need to configure a start trigger in order to synchronize the counter outputs even if they are in the same task). This is the only case I can think of where multiple channels in a DAQmx task are not automatically synchronized.
As an example:
Running this on my PCIe X Series gives a measured 2 edge separation of 1 ms + {7.78 us - 10.11 us}. This would likely be much worse on a bus with more latency (e.g. USB).
The resulting output is close enough to what you might expect that it might go unnoticed, but really these counter outputs are not synchronized and it would be easy to glance at the code and not even think twice about it. For the small amount of extra work on my end to create a separate task for each counter, it really clears up some ambiguity about what the counters are actually doing. For me it's worth it.
So again, for your case there really isn't a problem with having the counters in the same task since you are using an external start trigger anyway. I have just gotten in the habit of avoiding doing this.
</rant>
Best Regards,
John Passiak

Initialize the PXI 6602 Countercard for DIO Output in CVI

Similar Messages

Maybe you are looking for