Initiation of workflow from Primavera P6 R8.2 of Web Access is not working

ERROR com.primavera.infr.srvcs.bpm.BPMNServiceImpl ?:? BPM service could not connect to BPM Identity service provider for database 1
ORABPEL-10585
Service error.
Internal Error; Service error occurs in BPMIdentityService in method authenticateUser.
Refer to the log file that is configured for oracle.soa.services.identity for more details on this error and contact Oracle Support Services
at oracle.bpel.services.identity.client.AbstractIdentityServiceClient.authenticateUser(AbstractIdentityServiceClient.java:1111)
at oracle.bpel.services.identity.client.AbstractIdentityServiceClient.authenticateUser(AbstractIdentityServiceClient.java:1122)
at com.primavera.bpm.BPMServiceManager.getIdentityService(BPMServiceManager.java:226)
at com.primavera.bpm.BPMConnectorImpl.getInitiatableProcesses(BPMConnectorImpl.java:330)
at com.primavera.bpm.BPMConnectorImpl.getCompositesForDefaultPartition(BPMConnectorImpl.java:417)
at com.primavera.bpm.BPMConnectorImpl.getBPMProcessNodes(BPMConnectorImpl.java:387)
at com.primavera.infr.srvcs.bpm.BPMNServiceImpl$1.command(Unknown Source)
at com.primavera.infr.srvcs.bpm.BPMNServiceImpl$1.command(Unknown Source)
at com.primavera.bpm.common.BPMCommandRunner$a.run(Unknown Source)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.bpel.services.workflow.client.WorkflowServiceClientException: javax.xml.ws.WebServiceException: Could not determine wsdl ports.
at oracle.bpel.services.identity.client.IdentityServiceSOAPClient.invoke(IdentityServiceSOAPClient.java:287)
at oracle.bpel.services.identity.client.IdentityServiceSOAPClient.authenticateUser(IdentityServiceSOAPClient.java:622)
at oracle.bpel.services.identity.client.AbstractIdentityServiceClient.authenticateUser(AbstractIdentityServiceClient.java:1093)
at oracle.bpel.services.identity.client.AbstractIdentityServiceClient.authenticateUser(AbstractIdentityServiceClient.java:1123)
at com.primavera.bpm.BPMServiceManager.getIdentityService(BPMServiceManager.java:226)
at com.primavera.bpm.BPMConnectorImpl.getInitiatableProcesses(BPMConnectorImpl.java:332)
at com.primavera.bpm.BPMConnectorImpl.getCompositesForDefaultPartition(BPMConnectorImpl.java:419)
... 5 more
Caused by: javax.xml.ws.WebServiceException: Could not determine wsdl ports.
at oracle.j2ee.ws.common.jaxws.WSDLMetadata.initPorts(WSDLMetadata.java:166)
at oracle.j2ee.ws.common.jaxws.WSDLMetadata.getPort(WSDLMetadata.java:429)
at oracle.j2ee.ws.common.jaxws.ServiceDelegateImpl.createDispatch(ServiceDelegateImpl.java:275)
at oracle.bpel.services.identity.client.IdentityServiceSOAPClient.createDispatch(IdentityServiceSOAPClient.java:231)
at oracle.bpel.services.identity.client.IdentityServiceSOAPClient.invoke(IdentityServiceSOAPClient.java:271)
... 11 more
Caused by: javax.wsdl.WSDLException: WSDLException: faultCode=CONFIGURATION_ERROR: Problem instantiating factory implementation.: java.lang.ClassNotFoundException: oracle.webservices.wsdl.WSDLFactoryImpl
at javax.wsdl.factory.WSDLFactory.newInstance(Unknown Source)
at oracle.j2ee.ws.common.wsdl.WSDLHelper.getWsdlReader(WSDLHelper.java:88)
at oracle.j2ee.ws.common.wsdl.WSDLHelper.getWsdlReader(WSDLHelper.java:85)
at oracle.j2ee.ws.common.jaxws.WSDLMetadata.readWsdlDefinition(WSDLMetadata.java:354)
at oracle.j2ee.ws.common.jaxws.WSDLMetadata.initPortsFromWsdl(WSDLMetadata.java:197)
at oracle.j2ee.ws.common.jaxws.WSDLMetadata.initPorts(WSDLMetadata.java:164)
at oracle.j2ee.ws.common.jaxws.WSDLMetadata.getPort(WSDLMetadata.java:429)
at oracle.j2ee.ws.common.jaxws.ServiceDelegateImpl.createDispatch(ServiceDelegateImpl.java:275)
at oracle.bpel.services.identity.client.IdentityServiceSOAPClient.createDispatch(IdentityServiceSOAPClient.java:233)
... 12 more
Caused by: java.lang.ClassNotFoundException: oracle.webservices.wsdl.WSDLFactoryImpl
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
... 21 more
Edited by: user4883812 on Feb 1, 2012 6:03 AM
Edited by: user4883812 on Feb 1, 2012 6:11 AM
Edited by: user4883812 on Feb 1, 2012 6:15 AM

did you find the cause of this problem? I have the same symptoms.

Similar Messages

  • How to delete video from iTunes library? del and shift+del are not working - no any reaction

    how to delete video from iTunes library? del and shift+del are not working - no any reaction.

    seb963 wrote:
    Hi
    Currently, iMatch is turned off on my computer, as I do not want to upload any more songs. If I turn it on, will it upload all songs that are currently in my library? Is there another way that deleting them one by one?
    You must enable iTunes Match on the new computer. The best way to accomplish what you want to do is to create a new, empty library by launching iTunes while holding down the Option key (Shift on Windows) and choosing "new library." Do not let iTunes scan for new content, but do enable iTunes Match on the empty library. Once the scan is finished you may delete tracks from the cloud. When you are done switch back to the main iTunes library.

  • Is it possible to  downgrade ios 6 to 5.1.1(i upgrade my iphone 4s from 5.1.1 to 6 but map is not working )

    is it possible to  downgrade ios 6 to 5.1.1(i upgrade my iphone 4s from 5.1.1 to 6 but map is not working )

    best answer to your question I've ever seen is;
    Kappy Tampa, FL and Vancouver, BC
    Re: Downgrading     Oct 16, 2012 2:57 PM    (in response to nbabbit2013) 
    I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums, but you can use Google to find information on how to install an older version of iOS on any iDevice.

  • HI JUST COPYED CALL OF DUTY FROM ONE OF MY MACS TO OTHER IT WILL NOT WORK ON THE OTHER ONE?

    HI JUST COPYED CALL OF DUTY FROM ONE OF MY MACS TO OTHER IT WILL NOT WORK ON THE OTHER ONE?

    Are you saying that you bought the game from the App store and made another copy onto a dvd so you can play it on another computer too?  If so, you can not do that, you have to buy it again for the other computer.

  • I cannot seem to load raw images into LR 2.5.  I've been using this for years.  I always load from memory card, but it gives me an unknown error message.  I tried to load from camera, hard drive, & external drive and still will not work.  I checked import

    I cannot seem to load raw images into LR 2.5.  I've been using this for years.  I always load from memory card, but it gives me an unknown error message.  I tried to load from camera, hard drive, & external drive and still will not work.  I checked import menu and nothing has changed.  I loaded the photos onto my tablet and images are fine, so do not feel it is the memory card.  Any thoughts?

    The error message probably said "unsupported or damaged"
    The T3 requires Lightroom 3.4.1 or later. You can either upgrade to a more current version of Lightroom (version 5.6 is the most recent) or you can use the free Adobe DNG Converter to convert the RAWs to DNG, which should import into Lightroom properly.

  • I tried to update my photo albums in my Iphone 4S. I could not, and the old photos were removed. I tried again to copy the albums in the Iphone from a PC Windows XP folder and it does not work.

    I tried to update my photo albums in my Iphone 4S. I could not, and the old photos were removed. I tried again to copy the albums in the Iphone from a PC Windows XP folder and it does not work.

    You can't activate any GSM iPhone without a valid sim card installed in the phone.
    So, yes, you need to get a sim card.

  • I bought iphone 5c 4-5 days back from india and today back button of this phone not working, i am totally dissatisfy with the apple service support. i want replacement

    (i bought iphone 5c 4-5 days back from india and today back button of this phone not working, i am totally dissatisfy with the apple service support. i want replacement.)
    Hello i am nitin from india, i purchased a iphone5c because i heard that iphone comes with a great coustmer service, but this statment becomes totally wrong today, when i faced coustmer executive at service center of iphone then he said that i have to check it out and it may be a physical damage, ( how it is possible even i carried this phone with anti shock cover guard and its never fall down from my hand.) the simple thing i know that i want my phone replaced, otherwise it would be a great mistake of my life to purchase an iphone.
                                                                                          Thanks to all apple team for your wonderful service,

    Welcome to the user to User Technical Support Forum provided by Apple.
    For your issue... See here...
    Contacting Apple World Wide for Support and Service
    http://support.apple.com/kb/HE57
    Apple Warranty  >  http://www.apple.com/legal/warranty/
    iPhone Warranty  >  The warranty is only valid in the country of original purchase... Except for EU Countries...

  • I upgraded from leopard to lion and my epson printer will not work. I get a communication error

    I upgraded from leopard to lion and my Epson printer will not work. I get a error message comunication error. What can Ido to fix this I bought a new USB cord and it did no good.

    I suddenly had the same thing happen. I've had my new iMac for 3 months and at first my Epson Artisan 50 worked okay then yesterday I started getting the same error message other people on this support site have gotten. I tried ALL the advice given (deleating the Epson files from the library folder, etc. reinstalling older software) and nothing worked. With the newest iMac (and operating system) you cannot pick and choose which version of Epson software you want. You must use the 10.8 version or it simply will not open when you've downloaded it. Finally I found the comment above by den.thed and tried the OS X Mountain Lion: Reset the printing system suggested. As much as I hated to lose all my printing presets that took a lot of expiermentation to set up, I was desperate. I tried it and it worked. Now I just have to consult my old computer and try to recreate all my printing set ups.  So to others with Epson / Apple 10.8 issues this may help when everything else fails. Thanks den.thed for your advice.

  • I have an iPod and an Ipad and want to use FaceTime calling from the iPod to the Ipad but it does not work. I use the same iCloud acount.

    I have an iPod and an Ipad and want to use FaceTime calling from the iPod to the Ipad but it does not work. I use the same iCloud accountedge

    Did you set up different email addresses for each device?
    iOS: Using FaceTime
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems

  • OEM web console is not working from client side

    Hi All,
    I have 2 node RAC environment on windows 2003 server with 11g r1. My problem is on node a "oracle enterprise manager" "https://server-a:1158/em" is not working (node A). Is there any thing that I can do to solve this problem ?
    On node B the url "https://server-b:1158/em" is working.
    Any help would be appreciate.
    Regards,
    Edited by: 53637 on Feb 22, 2011 7:43 PM

    It works as expected, dbconsole runs on only ONE node in the cluster, all agents from this and the other nodes report to this console, statement from documentation:
    In 10.1.x.x, when a DB Control was deployed on a RAC cluster with n nodes, a dbconsole was started on each node of the cluster. Each agent on each node reported to each dbconsole management service on the same node.
    Beginning 10.2.x.x, to improve performance and reduce the workload on the RAC database/instances,when a DB Control is first deployed on a RAC cluster with n nodes, a dbconsole is started only on the node from which the DB Control is deployed. Each agent on each node reports to that same unique dbconsole management service.
    It is however possible to later reconfigure the DB Control to have more than one dbconsole started and to have agents reporting to several dbconsole.
    */

  • NW 7.3 + iView from remote source wizard + R3 Web Dynpro ABAP, not working

    Hi,
    I think this forum is my last resort.
    I'm running NetWeaver 7.3 Enterprise Portal and also have an existing ECC6 on backend.
    Our ABAP Programmer has built some WD4A application on ECC, I'd like to made them available
    on EP as ABAP WebDynpro iView.
    From the document, I know the way to create ABAP WD iView is different since 7.3. I have to use "iView from remote source" to do it.
    On EP side, I have made an system alias (test ok) for ECC, assigned permission, provide mapping id/pwd, and test. 
    On ABAP side, all webdynpro app are activated (T-code sicf, /sap/bc/webdynpro, /sap/public/bc/webdynpro...). I can even test WAS by bringing up browser and access some sample ABAP webdynpro .
    However, I cannot success on "iView from remote source" wizard and it always show me "Nothing found. Check your search Criteria.".   Eventhough I use "*" as search criteria.
    Anyone has the similar situation ? I even doubt that it is a placeholder of a feature , not working for now. Anyone made it work on NW 7.3 ?
    More detail:
    My System Alias for ECC:   
          Application Host: myr3.mydomain.com
          SAP Client: 600
          SAP System ID:   DEV
          SAP System Number: 00
          Server Port:  <leave it blank>
          System Type: SAP_R3
          Logon Method:  UIDPW
          User Mapping Type: admin,user
          ICM Host: myr3.mydomain.com:8000
          ICM Protocol: http
          ICM URL prefix: <leave it blank>
          SAP Netweaver AS Description: <leave it blank>
    All other fileds are leave it as default value
    I also assign a group to have "read" and "user" permission to this system
    Also assign Alias to the system.
    I also create a user belong to the group, assign his system mapping an ECC user ID & PWD to it.
    I tested the System alias, it is working (both WEB AS  test, and R3 test)
    Then I try to create an iView on EP, under a PCD folder , new->iview->iview from remote source. A wizard show up. Then I can select the ECC alias just created, and provide * as application search criteria, and then select "WEB DYNPRO ABAP" as the application type. Then "GO"
    as I mentioned, it always show "Nothing Found. Check your search crieteria"
    But I'm sure the web dynpro applications are activated on R3.
    OK, that's it, please help this one. Thanks
    IF YOU DID MAKE IT WORK ON YOUR NW 7.3, PLEASE DROP A LINE HERE SO I KNOW IT IS MY OWN PROBLEM !!!
    Edited by: Wilson KU on Nov 14, 2011 10:42 AM
    Edited by: Wilson KU on Nov 14, 2011 10:46 AM

    Thanks for the reply,
    [About Backend]
    I feel confident about the backend R3 system because I can use the WAS URL to access the sample WD4A application, for example, I can bring up the wd4a application ui in my browser. It is purely browser and R3 stuff, no EP involved.
    http://soeprdev.mydomain.com:8000/sap/bc/webdynpro/bobf/demo_sales_order?sap-client=600&sap-language=ZF
    I also already activate all nodes and sub-nodes (in SICF Services) under /sap/bc/webdynpro as well as /sap/public/bc/webdynpro. (and some other nodes to make icon and include work)
    [About the system object in EP]
    I have done all kind of test on the system object (alias):
    1. In EP System Administration -> Landscape Configuration, I select the system object, click "Test Connection", It shows me a Check mark, and the detail message is SOE_DEV_600 connection
    2. Edit the System object, then click on "Connection Tests" page, I see two lines there, check both and click test, here is the result:
    SAP Web AS Connection:
    : Test Details:
    The test consists of the following steps:
    1. Check the validity of the system ID in the system object
    2. Check if the system can be retrieved
    3. Check if the system object has a valid system alias
    4. Check if an SAP system is defined in the system object
    5. Validate the following parameters: Web AS protocol; Web AS hostname
    6. Checks if the host name of the server can be resolved.
    7. Pings the Web AS Ping service (works only if the service is activated on the Web AS, and only on ABAP Web AS)
    8. Check HTTP/S connectivity to the defined back-end application
    Results
    1. The system ID is valid
    2. System retrieved successfully
    3. Retrieval of the default alias was successful
    4. The system object represents an SAP system
    5. The following parameters are valid: ICM Protocol (http) ICM Host Name (soeprdev.mydomain.com:8000)
    6. The host name (soeprdev.mydomain.com) was resolved successfully
    7. The Web AS ping service http://soeprdev.mydomain.com:8000/sap/bc/ping was pinged successfully
    8. An HTTP/S connection to http://soeprdev.mydomain.com:8000 was obtained successfully.
    Connection Test for Connectors:
    : Test Details:
    The test consists of the following steps:
    1. Retrieve the default alias of the system
    2. Check the connection to the back-end application using the connector defined in this system object
    Results
    Default alias retrieved successfully
    Connection successful

  • Upgraded from 10.5 to 10.6. IP Printing not working?

    Hello,
    I recently upgraded from 10.5 to 10.6 Snow Leopard and as I knew, our Appletalk Printers no longer showed up. I knew this would be the case and tried adding the printers via IP. I've printed out the spec sheets from the printers to obtain the IP addresses. I entered them and from what I can tell, everything went fine. It said it was a valid IP and each of the printers showed up under the list of printers. When I went to print none of them work. It says it can't find it on the network. As a side note (or possibly the problem) when I found the printers via IP address, it did not put the name of the printer in the name field but the IP Address itself. Is this normal and can I change the name to the actual printer name OR should the printer name show up automatically?
    Here are the printers:
    HP Laserjet 5000
    Kyocera 5035
    Kyocera 1650
    Here is what I've tried:
    1. Software Update… until I could update no more.
    2. Updated all print drivers. Each of them show up in the "Select Printer Software" dropdown menu.
    3. Reset Printing System in the Print & Fax menu.
    4. Replaced the "CUPS" directory/older via this links instructions. http://www.gcsdblogs.org/roodhouse/?p=2349
    I am currently repairing permissions. Right now the estimated time is 2 HOURS. Incredibly long but maybe due to the upgrade??
    Any and all help would be appreciated. Thank you in advance.
    Randy

    Addition:
    The repair permissions/cup folder move I mentioned above did not work. I have now also tried changing the ownership of one of my kyorera files to "root" as mentioned in another post on here yet that did not work either.
    Thanks again for any help you can provide. I keep scouring these forums but have yet to find anything.
    Randy

  • My pc has a virus I just downloaded song from pc to kids ipods now both ipods are not working correctly could the virus be in the ipods,  if not why are both not working doing the same thing right after unplugging from pc.

    Can an ipod get a virus from a pc that has a virus.  After connecting two different ipods to my pc to download music they both are not working correctly, could the virus have transferred to the ipod,  if not why would both ipods not work and be doing the same thing?  When trying to click on a game it just stays on the main screen.

    - I have not heard of a virus that can cause problem with an iDvice that has not been jailbroken.
    - Try resetting the iPods. nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Do you hve problems with one game? The same game on both iPods?
    Other apps?

  • I can't click below the toolbar .half inch to 3inch from right to left. all words or letters are not working. please help to resolve this problem. thanks!

    Everytime I open firefox, all words or letters below the toolbar half inch to 3 inch from right to left are not clickable(not working). but they are working or clickable on google crhome or internet explorer. please help to resolve this problem. thanks!

    The '''''Yahoo! Toolbar''''' and the '''''Babylon''''' extension have been reported to cause that problem. They seem to invisibly extend downward over the top of the web page display area. Disable or uninstall those add-ons.
    *See --> http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
    *See --> http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
    *See --> http://kb.mozillazine.org/Uninstalling_toolbars
    *See --> https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • How do i download a pdf file from an e-mail? save to computer did not work.

    How do i download a pdf file from an email? Save to computer did not work.

    What is your operating system?  What is your email client?  What exactly means "did not work"?
    Most email clients I know have a 'Save Attachments' functionality; did you try that?

Maybe you are looking for