Input Area in BPS Layout is too small

Dear experts,
I'm really desperated due to BPS. We definded a BPS layout of type "Key Figs in Data columns" and like to add data via manual planning. The layout is displayed in Excel format.
When opening the layout only 20 lines in the layout are ready for input. When all 20 lines are used, we have to hit the "check" button, to insert new lines that are available for input. My problem is, that we run Excel macros to generate the data. The records are much more than 20. Only some of them are recognized as BPS data the rest is ignored and also not stored in the cube. Does anybody know where this limitation can be switched off or where the number of lines that are available for data entry can be increased.
I guess this is not a new problem for some of you.
Any input highly appreciated.
Thanks!
Bernd

Thomas,
   Here are some useful links that will provide some food for thought:
Re: Changing the number of rows allowed for editing in planning layout
Re: Edit Saved characteristics in Excel Planning Layouts?
Re: Maximum number of combinations in a SEM BPS layout
Re: planning layout limitation
The short answer is it will have significant negative performance impact.I would look at alternative solutions for the true business requirement.Please read the content in these links and let me know if your business requirement would still enforce you to do over 999 records manually at a time.
Hope this helps.
Cheers
Srini

Similar Messages

  • Data area for accessing table is too small., error key: RFC_ERROR_SYSTEM_FA

    Hi all,
    I build a java applicatio to call a sap function.
    This FM have only an import parameter as structure, the last field of this structure is 16000 characters long.
    When I start the application if the long field is empty all works fine, but if I fill it the java compiler send me this runtime error:
    [code]
    Exception in thread "main" com.sap.aii.proxy.framework.core.BaseProxyException:
    Data area for accessing table is too small.,
    error key: RFC_ERROR_SYSTEM_FAILURE
         at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
         at bi9032.BI_9032_PortType.zhr_Bi_9032(BI_9032_PortType.java:16)
         at bi9032.Startapp.main(Startapp.java:50)
    [/code]
    Any one can me explain the problem?
    It's possible that I can't pass a large data quantity?
    thanks and regards,
    enzo
    Message was edited by: Enzo Porcasi

    I understood that it's a sap problem,
    so I will write in the abap forum,
    bye
    enzo

  • Storage Area for GUI status is too small

    Hi Experts,
    I have developed a custom program in which i ahev my own GUI status for the modal dialog box.
    At certain point I am getting error "Storage Area for GUI status is too small"
    What is the solution for this?
    Thanks.

    Hi Klas,
    I am getting the error as Storage Area of GUI Stattus "PROGRAM MAME" "GUI STATUS NAME" too small.
    I did not mention the program name and gui status name .
    Mean;
    I do not have any push buttons. While I am creating teh order for each item it will popup teh custom screen to select something.
    When the number of items becomes more I am getting that issue.
    As it calls the BUI status each time, the memory gets full and hence gives that message.
    If you know the exact solution plz reply back.
    Thanks
    Kumar

  • Check user manual input in excel BPS layouts

    I have some problems for manual input characteristics checks on an excel bps layout.
    I need to assign the value of an header characteristic to a detaild characteristic. How can I do ? I have already tried with characteristic rels. (exit, attributes, etc.) but without results.
    Thanks in advance.

    Hi Mario,
    I am quite sure, that if a char is in an P.Level, and there is a char relationship for it, the char relationship will not be called (somebody correct me if am wrong).
    So, in your case, you want to derive SALES ORG from Company code using char rel. The sales org is in the p.level, since it is in your layout. Threfore the char rel will be not called.
    If you want to have it works, do not select sales org in your level. I assume that you filter your comp code in level with a bps variable. Get this variable value (using API_SEMBPS_VARIABLE_GETDETAIL function) and assign it to char SAles org in your char rel exit. Everytimes when you save your plan data, the char rel exit will be call and sales org will be derived.
    If you want to show and derive the sales org in your layout based on selected company code, create a bps variable type exit for it, and read and derive the value from comp code variable.
    Best Regards,
    Suan Liono

  • Muse: phone layout rendering too small in droid razr max?

    is there a way to apply styling to specific phone types within muse?

    I think Verizon does have a responsibility to set a standard whereby the cellphone manufactures, that Verizon contracts to partner with, are obligated to maintain the quality of the OS. Customers are charged close to $1,000 each year for Verizon service and in return Verizon does not hold cellphone companies, whom we have to deal with, accountable for terrible service.  How come you do not realize that this is a rip off?  What is Verizon going to do to address this know problem?

  • Layout too small on 4k monitor

    the software layout is too small to read on my new 4k laptop monitor, how can i fix that?

    You too.
    Its nice to know the Adobe appreciates user that help their users and also does not censor forums but for inappropriate content.  I am a big fan of Photoshop and have also been very critical of Adobe support sill Adobe recognized me..  While Photoshop is the best game in town I would still like to see bugs fixed.   Adobe's programming staff is outstanding they can fix them.  Adobe does fix major bug.
    This experimental 2x UI is a case where Adobe realizes when something does not work I have confidences Adobe and Microsoft will come up with a solution.  While the current patch may be OK for laptop and tablets with high resolution 4K displays it does not actually work well for Laptop and Tablets that have high resolution displays that are not 4K tablets.  Displays with less the 2056x1536 pixels do not meet Photoshop requirement when run at half resolution.  If you look at the above append you would see the a machine like Microsoft Surface Pro 2 which has a high resolution 1920x180 pixels. When you use Photoshop on it and use the 2x preference its equivalent of running Photoshop on a machine with ad display with 960x540 pixels.  The display does not meet Photoshop Requirements so Photoshop UI does not fit on screen, A Surface Pro 3 screen 2160x1440 becomes a 1080x720 close to the required 1024x768 just 48 pixel short in height.

  • HOW to Restrict the input Help for 0MATERIAL in the BPS Layout

    Hi,
    I have requirement to Restrict the input Help for 0MATERIAL  in the BPS Layout.
    For Example if the Planning Package is Restricted to SALES ORGANISATION ( 3000 )  then the system shuold  check the 0MAT_SALES  where SALES ORGANISATION IS "3000" )AND PASS THE Material Numbers to the 0material list.
    I have Copied the standard Funtcion group  "UPF_VARIABLE_USER_EXIT"  to Z fucttion and have attached to Z Variabe as User Exit .
    this Variable is  Attached to 0material in the Planning Pakage. So tha now the 0MATERIAL is restricted to the variable which is having the User Exit.
    But how to acces the Values of Planning Package for which the Layout is bein Executed from this Z User Exit ???
    I Know how to restrict the input help, but my only problem is that how to get the values of Planning package through this User Exit.
    Please suggest if it is possible.
    Regards,
    Nilesh Labde

    Hi Nilesh,
    As I understand from your question,you know how to restrict but the issue is to know the value in the package with which you need to restrict.
    There are two tables which can help you finding the value used in package for sales organisation:
    1. UPC_PACKAGE
    2. UPC_OPTIOS
    How to use ?
    From UPC Package you will get one GUID, Hit the second table UPC_OPTIOS with this GUID.
    In field "FIELDNAME" enter the name of the characteristic whose value is req (sales organisation in your case)
    Hope this helps you
    Mann

  • Viewable area appearing too small in Portal

    Hi Experts,
    We are facing a very strange problem. We are using EP 7.0 . The viewable area is appearing too small when we click on refresh. On repeated press of F5,it is showing very erratic behaviour .The area is expanding or shortening every time we press F5.
    Any inputs on this would be highly appreciated.
    Thanks in anticipation.
    Regards
    Harshmeet Singh

    Hi Harshmeet,
    Please let us know the internet explorer version and check service market place - [product availability matrix |http://www.service.sap.com/pam] for more details for allowed browser versions.
    Check the internet explorer setting and do the security setting as medium.
    Regards
    Arun Jaiswal

  • Timestep too small and Input Power Factor cannot be got

    Hi All
    I've just started using multisim 2001 to simulate Electronic Ballast circuits and am having trouble.
    About Double-Stage Electronic Ballast circuit,it works well before using EMI circuit,but I get a "timestep too small" error message after using EMI circuit.
    About Single-Stage Electronic Ballast circuit,it also works well before using Wattmeter,so I cannot get input Power Factor.Besides, I try to add EMI circuit, but noting works.
    I attached my circuit to this email, could someone please give me some assistant? I would be really appreciated
    Thanks
    Attachments:
    Double-Stage.msm ‏33 KB
    Single-Stage.msm ‏20 KB

    I have tried something, but I am still not sure I am getting accurate readings. What I did was to remove the bridge rectifiers and the AC Voltage source and replace them by a DC power source at the same voltage value. It seems to stablize the reading, but I am not sure how reliable it is or if that is what it should be. What I will do is post the two circuit for you and let you look at them. It takes a little bit for the reading to stabalize so just be patient.
    Here they are:
    Kittmaster's Component Database
    http://ni.kittmaster.com
    Have a Nice Day
    Attachments:
    Double-Stage_2.msm ‏30 KB
    Single-Stage_Modified.msm ‏32 KB

  • Bookmarks - Hate the firefox version. Double click on the site to bookmark and the book it too small. And when in the bookmark window on the right side of the screen there is no way to know which folder you are actually in. Help.

    Bookmarks - Hate the firefox version. Double click on star in the address window to bookmark the site and the pop-up window is too small and user unfriendly. And when in the bookmark window and have bookmarks on the right side of the screen there is no way to know which folder on the left you are actually in. Is there any way to upgrade the bookmarks feature. So frustrating I might actually go back to IE because of this. Thanks.

    I have sort of the exact same problem. Extremely far away from user friendly
    I have an second issue as well: When I hook off all-day it comes up with an 8 hour event!
    And then if I put in a late start hour it pushes end time to next day due to the 8 hour event suggestion.
    All in all this gives a lot of changes just to enter an event.
    Command N
    I learnt from your input to use this fuction. At least that comes up with a one hour event as default.

  • Error "roll area too small"! Can't find a way to resolve!Please hep.

    Hello everyone:
           i am getting the error "roll area too small" when I am looping through an internal table and calling the code below on change of some value.
    ===
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
          EXPORTING
            authority              = space
            immediately            = space
            new_list_id            = c_x
            no_dialog              = c_x
           user                   = sy-uname
          IMPORTING
            out_parameters         = params
          EXCEPTIONS
            archive_info_not_found = 1
            invalid_print_params   = 2
            invalid_archive_params = 3
            OTHERS                 = 4.
        IF sy-subrc NE 0.
          CLEAR : params.
        ENDIF.
    The printer destination has to be set up
        params-pdest = v_dest.
        params-prtxt = v_spool_text.
        params-paart = lc_paart.
        params-prtxt = v_spool_text.
        params-primm = 'X'.
        params-prrel = space.
        NEW-PAGE PRINT ON PARAMETERS params NO DIALOG.
        NEW-PAGE PRINT OFF.
    ======
    I posted this before and got some feedback and tried everything but it is not fixing the problem! I rewarded points to all the answers. I had basis increase roll area size, optimized code and did everything I can but I am still getting the same error "roll area too small". Same program works in 4.6C but in ECC6.0 I get this error! I have other programs that generates more than 10,000 pages in the spool but the program I am working on creates only 7700 pages! I  am not sure what else is changed in ECC6.0! Could someone please give me any ideas? rewards assured.
    thanks.
    Mithun

    Hello Mithun,
    Even i think increasing the roll area should have helped
    Are both the systems WIndows based  or is one unix based ?
    see this
    http://listserv.sap.com/pipermail/linux.general/2001-July/thread.html#670
    and search for "roll area too small" in the list of links
    it may help
    Also,
    in this solution, it says to use 'field groups'
    http://www.sapfans.com/sapfans/forum/r2all/messages/42.html
    Try these links as well - others with the same problem
    http://marc.info/?l=mysap-linux-general&w=4&r=1&s=%22rollareatoo+small%22&q=b
    Message was edited by:
            Kris Donald

  • Photoshop CC icons and text are too small: how to adjust so they're readable? [was: Joanne]

    I have just downloaded Creative Cloud on a new computer.  The new photoshop icons and text are too small for me to see or work with.  I cannot seem to adjust this so its "useable"

    Hey Bob,
    Ive put feature requests for this in before and I know many others have as well. Is there any way to see if Adobe is actually working on this? I dont really consider this a feature request, it should be standard with the software. A feature request would be something like creative cloud libraries, not the ability to make font sizes and icons bigger.

  • How do I make icons bigger? All icons are way too small for speedy use. no matter what I do they remain too small. Is there a way of getting them the same size as previous versions?

    All icons, such as refresh page, back, forward, stop and home etc; are just too small for comfortable use. For now I am uninstalling Firefox 4 and going back to 3.x. even the zoom page icons are too small.

    "I had read that GarageBand or the Musical Typing there can sometimes not display properly when the resolution is changed."
    Well, did you checked GB after you changed your resolution?
    Which setting did you change to?
    You & I have the same size iMac screen. My resolution setting is 1280x800. Everything fits perfectly in the windows & on desktop including the menu bar.
    All info in my windows are showing. I did not need to adjust my browser font size settings. I am sure you are aware of the browser font size settings. I use FF & the settings are in Preferences>Content.
    In the Finder window you can enlarge the icons & fonts also.
    Finder>View>Show View Options.

  • I can't delete partition in disk utility, it keeps telling me that "the changes are too small"

    I previously split my disk into two different disks, however I want to combine them together again, yet i was unable to delete the second partition. I can't delete partition in disk utility, it keeps telling me that "the changes are too small"
    Plz help!!!!!!

    Make at least two complete backups of all your data. Boot from another drive and partition this one as desired. Restore the data.

  • How can I sort my photos by size?  I need to get rid of those which are too small to print.

    Is there a way to sort individual photos in iphoto by size.  (I know you can sort photos in finder- picture by size, but mine are in iphoto). I am organizing my thousands of photos into files within iphoto in order to print hundreds.  I am finding that many are too small to ever print (20-30kb) , and would like to delete those en masse rather than waste time sorting them, but cannot find a way to do that.  Does anyone know if there is a way?  It would be a terribly useful function.  Also, sorting by size would enable you to resize photos that take massage amounts of room unneccesarily.  Thanks for any info.

    No there is no way to do this.
    Also, sorting by size would enable you to resize photos that take massage amounts of room unneccesarily.
    No it wouldn't. There's no way to change the filesize in iPhoto, it always preserves the original file.

Maybe you are looking for