Insert Database Name onto Report

I would like to Insert Database Name into Header of Report. Presently Using Crystal Reports 2008 and SQL Express, but will be migrating to Postgres.
Thanks in advance.

If you're using SQLExpress (or any version of MS SQL) and tables/views as your datasource, you could use a "SQL Expression Field" in Crystal. Just create one (it's over there by your formulas!) and it's real simple:
db_name()
and drop it onto your page.
If you're using commandtext as your datasource, just add the above into your select statement...
select
db_name() as ThisIsMyDatabaseName,
someval,
anotherval
from MyTable
No idea about Postgres, but I'd be stunned if it didn't have a similar function to return the current database name.

Similar Messages

How to get database name

How do i get the database name in reports. we can get this in form by get_application_property, do we have anything like that in reports
thanks

Check the database dictionary tables.
sys.v_$parameter certainly contains a parameter with the name 'db_name'and the value of the database name.
see what you get when you run:
select * from sys.v_$parameter where name='db_name'
If the user running the report won't have the select priviledge on sys.v_$parameter, then you will have to create a function that returns the value for the db_name parameter (that is in the schema of a user that has that priviledge) and grant execute on it to the user that runs the report and create a synonym for that function.

Insertion of an error report was throttled to prevent flooding of the Call Detail Recording (CDR) database

Hello,
One of my Lync 2013 standard front-end servers is frequently logging this error:
Log Name:      Lync Server
Source:        LS Data Collection
Date:          28/12/2012 10:04:05
Event ID:      56208
Task Category: (2271)
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      LYNC-FE2.mydomain.local
Description:
Insertion of an error report was throttled to prevent flooding of the Call Detail Recording (CDR) database.
Component: CDR Adaptor
Cause: This is an expected condition if too many error reports of the same type were reported at the same time.
Resolution:
No action is needed. A large enough number of error reports of this type have already been inserted into the database and can be used for troubleshooting and reporting. Additional errors are not inserted to avoid flooding of the database with redundant information.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="LS Data Collection" />
    <EventID Qualifiers="35039">56208</EventID>
    <Level>3</Level>
    <Task>2271</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2012-12-28T10:04:05.000000000Z" />
    <EventRecordID>10745</EventRecordID>
    <Channel>Lync Server</Channel>
    <Computer>LYNC-FE2.mydomain.local</Computer>
    <Security />
</System>
<EventData>
    <Data>CDR Adaptor</Data>
</EventData>
</Event>
I don't appear to have any problems or issues with Lync at all. Full Enterprise Voice is in use at this site.
Anyone know why this may be occuring?
Thanks,
Ben

Did you check any additional errors? I'm seeing the same issue and linked it to this actual error message that seems to point towards a broken data model or bugged type casting/checking in the interface:
Failed to execute a stored procedure on the back-end.
Component: CDR Adaptor
Stored Procedure: RtcReportError
Error: System.Data.SqlClient.SqlException (0x80131904): Error converting data type varchar to float.
   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.Rtc.Common.Data.DBCore.Execute(SprocContext sprocContext, SqlConnection sqlConnection, SqlTransaction sqlTransaction)
ClientConnectionId:xxxxxxxxxxxxx
Cause: Configuration issues, an unreachable back-end or an unexpected condition has resulted in the error.
Resolution:
Verify the back-end is up and this Lync Server has connectivity to it. If the problem persists, notify your organization's support team with the relevant details.

How to develop a report in Crystal with flexible database name?

Hello
I am a Project Manager of a project of developing reports in Crystal 11.
The idea is to develop reports on top of the content in MS SQL tables.
The initial testing and demonstration to the customer is done within the Crystal development environment.
In a later stage, we need to integrate the reports with C# WPF application, using Crystal control.
We currently use ODBC connections.
We want the flexibility to set the actual database dynamically, by using the "default database" of the ODBC connection (or any other way). In other words, we want not just the flexibility to change the database server, but work with different database names, like "ProductDB_TEST", "ProductDB_PROD" etc. - without changing the report.
Unfortunately, we got the answer from the developer that the database name should be pre-defined for a given report. Although the connection can be set to another server, the DB name cannot be set dynamically.
Looking into the "Database" -> "Show SQL Query" menu, we see the following piece inside the query:
INNER JOIN "DATABASE_NAME"."dbo"."IncidentTypeSnapshotData"
So it looks like the query itself contains the DB name.
Is it really a limitation of Crystal, or rather the developer working on the project doesn't know the trick?
Thanks for any hint
Max

CR CR 2011 / "Crystal reports For Visual Studio 2010", you are correct.
Re. the database thinggy. You can connect to a database via ODBC, OLE DB or in some instances natively. Once a report is created you an change the datasource. A good sample app on how to do this is csharp_win_dbengine / vb_win_dbengine. A link to the samples is here:
Crystal Reports for .NET SDK Samples - Business Intelligence (BusinessObjects) - SCN Wiki
More info on connecting to dbs and changing them is in the developer help files:
SAP Crystal Reports .NET SDK Developer Guide
SAP Crystal Reports .NET API Guide
More info on CR APIs for .NET (applies to all versions of CR and VS):
Crystal Reports for Visual Studio 2005 Walkthro... | SCN
You can also use ADO .NET Datasets and in this way you handle the database connections in your app. A good sample is csharp_win_adodotnet (also available in VB) - same link as above.
More info on datasets:
Crystal Reports Guide To ADO.NET
Crystal Reports for Visual Studio .NET - Walkthrough - Reporting Off ADO.NET Datasets
For more complicated operations (e.g.; changing a report from ODBC to OLE DB, changing one table, etc., you will want to use the InProc RAS SDK that is also available in CRVS. Developer help files are here:
Report Application Server .NET SDK Developer Guide
Report Application Server .NET API Guide
Sample apps are here:
NET RAS SDK Samples - Business Intelligence (BusinessObjects) - SCN Wiki
and here:
Crystal Reports .NET In Process RAS (Unmanaged) SDK Sample Applications
More info on RAS SDK:
How to Use The RAS SDK .NET With In-Process RAS Server
Lastly, do use the search box in the top right corner. I find simple search strings such as 'crystal net parameter' return best results (KBAs, Blogs, docs, wikis, discussions and more).
- Ludek

How to change Crystal Reports XI database name at run time from ASP code using ADO

Dear All,
I need advises regarding to my problem below
I have two database in same SQL 2005 SERVER for TEST01 and LIVE01 Environtment, and I've created more than 100 reports with Crystal Reports 11 and call it from ASP classic page.
The problem is how can I change a database from TEST01 to LIVE01 at the run time from ASP code as I already using TEST01 database on Crystal Reports and I do not want to set a new database location inside crystal for each reports
Thanks and wait for your reply soon.
Below is my code, which has no effect to crystal reports although I've change the database from TEST01 to LIVE01:
<%
Dim oADOConnection, oRptTable, oADORecordset, sql
Dim struser, strpwd, strdriver, dblocation, dbname, strConnect
struser = "sa"
strpwd = ""
strdriver = "{SQL SERVER}"
dblocation = "SQL200501"
dbname = "LIVE01"    ' Changed from TEST01 to LIVE01
strConnect = "User Id=" & strUser & ";"
strConnect = strConnect & "PWD=" & strPwd & ";"
strConnect = strConnect & "DRIVER=" & StrDriver & ";"
strConnect = strConnect & "SERVER=" & DBLocation & ";"
strConnect = strConnect & "DATABASE=" & dbName
sql="Select * from Employee"
Set session("oApp") = Server.CreateObject("CrystalRuntime.Application.11")
Set session("oRpt") = session("oApp").OpenReport("C:\REPORTS\RPT01.RPT", 1) 'USING TEST01 DATABASE
session("oRpt").MorePrintEngineErrorMessages = False
session("oRpt").EnableParameterPrompting = False
session("oRpt").DiscardSavedData
Set oADOConnection = Server.CreateObject("ADODB.Connection")
oADOConnection.Open (strConnect)
Set oADORecordset = Server.CreateObject("ADODB.Recordset")
Set oRptTable = session("oRpt").Database.Tables.Item(1)
oRptTable.SetDataSource oADORecordset, 3
session("oRpt").SQLQueryString = CStr(sql)
session("oRpt").ReadRecords
%>

Did you ever find a solution to this problem? I have the same problem when moving reports from development to Test to Production environments. If the DBName is not the same the report ignores the name provided at runtime.

Can we enable Database Name box while scheduling report

Hi, I am boxi administrator and I am working on a unique client requirement. I don't know if it needs to be in administration forum or crystal reports. we are using crystal reports and We are on boxi R2 SP3 on IIS.
We have 8 DB servers for load balancing ( look www.intersystems.com for details of how). We want to publish report in BOXI and user will then schedule report. We don't want multiple copies as it will be difficult to maintain at several places. So please rule out the possibility of 8 copies of same Crystal report connected to each 8 DB servers.
When user schedules report then we want to load balance the DB servers i.e. we have defined 8 ODBC connections on each application servers and want to use all ODBC ( DB) for each report. When we schedule reports then I see server name and Database name is disabled in Database logon properties.
Please let me know if this is possible. We will be using standard infoview to schedule reports.
Thanks,

This is not feasible. I figured out one option that is using Virtual IP with Load balancer. We can load balance ODBC using this. This is tested in another project of state govt.
Thanks,

How can I get a report to use a DSN instead of a database name?

DSNs are great things. By using a DSN in a database connection string, you don't have to worry about what happens if you have to look at a different database, or if a database name changes. All you have to do is change the database the DSN points to, and everything that was built using that DSN still works.
Everything, that is, except Crystal Reports.
I am using CR XI. Our customer's database is named "Anneal", and it uses PostgreSQL. I have several copies of that database, taken at different times and for different purposes, on my machine: "Anneal", "AnnealTest", "Anneal_2_8_10", and on and on. I also have a DSN named "WinCaps". The reorts I have developed for this customer were set up to use an ODBC connection based on the WinCaps DSN. But if WinCaps pointed to the "AnnealTest" database when it the report was created, and then I delete the AnnealTest database and change the WinCaps DSN to point to a database named "Anneal", and then try to open the report, I get a complaint that the AnnealTest database does not exist! Yes, I know it doesn't exist. I am expecting CR to use the DSN I told it to use, which should get me to the Anneal database.
The fact that CR complains about the AnnealTest database tells me that internally, CR is retrieving the actual name of the database and storing that instead of storing the DSN name, completely defeating the purpose of the DSN.
Is there any way I can set up my report to use whatever database the DSN happens to be pointing to, instead of the database the DSN pointed to at design time?
Thanks very much!
Rob Richardson

Hi Rob,
Crystal assumes you are setting location to the database and it stays that way when run. Yes we do keep the connection info in the RPT file.
There's a few options that may help. First, can you upgrade to CR XI R2? It' still supported...
Go to this link: http://www.sdn.sap.com/irj/boc and download the trial version of CR XI R2 and use your XI keycode, then apply the patches which you can get to by clicking on the BusinessObjects tab above, then Downloads.
Direct link to the Trial version: http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
Second, in the report itself check on the Verify on first refresh, save the report and then test it on another PC connecting another database.
Next option to to try these registry key changes, usual warnign about altering the registry:
HKEY_CURRENT_USERSoftwareBusiness ObjectsSuite 11.0Crystal ReportsDatabaseOptions - VerifyWhenDBDriverUpgraded = Yes
And try changing this one also - DontAutoConvertODBC = Yes
Close the Designer first or your changes won't stay.
THey may have to simply verify the data manually and then save the report so the updated location info is saved in the Report.
Crystal is very database dependant obviously so asumming changes made to the DSN are automatically updated can cause a lot of issues for the end user also but it depends on your point of view. We consider this working as expected.
Thank you
Don

How to display database name in page footer in webi report

Hi Every one,
I have migrated deski report from BO 6.5 to BI 4.1. and converted Deski to WEBI in 4.1.
In Bo 6.5 page footer displaying database name but BI 4.1 it showing database type (like Oracle 10g,9i ..etc..).
I want database name in page footer.
Please any one help me to solve this issue.
Thanks

Hi Thanks for your reply.
We have tried this option but its not helpful.
Below syntax is in both BO 6.5 and BI 4.1.but in 6.5 it showing database name where as in BI 4.1 it showing database type
="Track GPQ Database - " + Upper(Substr(Connection((DataProvider(([product])))) ;Pos(Connection((DataProvider(([Product])))) ;"DATABASE")+9 ;7)).

Report incompatibility beacause of database name change

Hi !
I am using Crystal Reports 2008 with a MSQL 2005 database.
I want to use the same report on two databases with same structure but different names. I keep getting error message: "Failed to retrieve data from database" ,"invalid object name... [Database vendor code:208]".
Set Datasource Location command does not help...
Need some help !
Calin

Morning,
If I get this right you are trying to use the same structured report for another database of different name but similar tables?
If yes, then I think you need to change the database as a source on your new (second) report.
Mind you, that will take all the fields out which are linked but you can certainly put them back into the place once you established the right link.
I don't think there is a way of refreshing the same report to use different database, however, there could be another way to this.
Add the new database into the report, replace all the fields of the old database with the new one, and then get rid of the old database completely.
This way you would remember where each field was placed in the report.
Hope this helps.
DO let us know how you get along with it.
Kind Regards
Jehanzeb

What's the default mysql database name in Crystal Report Server XIR2

Hi Experts,
I am upgrading Crystal Report Server from XIR2 to XI3.1.
I need to know the default mysql database name when upgrading.
Anyone knows?

Hi,
In XI3.1, when BOE installed with default mySQL DB then the installer creates a DataSource with name "Business Objects CMS".
And the DB name will be "BOE120".
I guess in XIR2 DB name will be ''BOE115".
Also, if you launch the CMC admin page then in the settings link the DB info will be displayed.
-Noor.
Edited by: Nooreazam Sayyad Abdullas Peerzade on Dec 15, 2010 1:54 PM

Report Builder 3.0 odbc database name using parameters

I am using an ODBC connection for my Datasource in a report (MYSQL).
I have a valid connection for the report using a database name in the connection string i.e. 'BOE-201402'.
However I need to be able to allow the user to run the report using different databases.
I can get a list of the databases as a parameter by setting a dataset using the following
SELECT `SCHEMA_NAME` FROM `information_schema`.`SCHEMATA` WHERE `SCHEMA_NAME` LIKE 'BOE-%' ORDER BY `SCHEMA_NAME` DESC;
i.e.
BOE-201402
BOE-201401
I have set a parameter called @BOE_DATABASE from the drop down list provided above.
What I need to do is before rendering the report is to be able to point the datasource to the database stored in @BOE_DATABASE so that the results that are in the report come from the chosen database.
I am sure that there is a way to do this as I have done this using ACTUATE BIRT reporting tool which we want to replace urgently with Microsoft SQL
I would sincerely like to thank any quick response on this matter

Hi Leslie,
Thank you for your post.
Please refer to the thread your post above.
http://social.technet.microsoft.com/Forums/en-US/f02b7caf-5f01-41d9-810f-fbce659e5aec/report-designer-odbc-connection-string-for-data-source-using-a-parameter?forum=sqlreportingservices
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

SQL Query to get Project Plan Name and Resource Name from Reporting database of Project Server 2007

Can you please help me to write an SQL Query to get Project Plan Name and Resource Name from Reporting database of Project Server 2007. Thanks!!

Refer
http://gallery.technet.microsoft.com/projectserver/Server-20072010-SQL-Get-a99d4bc6
SELECT
dbo.MSP_EpmAssignment_UserView.ProjectUID,
dbo.MSP_EpmAssignment_UserView.TaskUID,
dbo.MSP_EpmProject_UserView.ProjectName,
dbo.MSP_EpmTask_UserView.TaskName,
dbo.MSP_EpmAssignment_UserView.ResourceUID,
dbo.MSP_EpmResource_UserView.ResourceName,
dbo.MSP_EpmResource_UserView.ResourceInitials
INTO #TempTable
FROM dbo.MSP_EpmAssignment_UserView INNER JOIN
dbo.MSP_EpmProject_UserView ON dbo.MSP_EpmAssignment_UserView.ProjectUID = dbo.MSP_EpmProject_UserView.ProjectUID INNER JOIN
dbo.MSP_EpmTask_UserView ON dbo.MSP_EpmAssignment_UserView.TaskUID = dbo.MSP_EpmTask_UserView.TaskUID INNER JOIN
dbo.MSP_EpmResource_UserView ON dbo.MSP_EpmAssignment_UserView.ResourceUID = dbo.MSP_EpmResource_UserView.ResourceUID
SELECT
ProjectUID,
TaskUID,
ProjectName,
TaskName,
STUFF((
SELECT ', ' + ResourceInitials
FROM #TempTable
WHERE (TaskUID = Results.TaskUID)
FOR XML PATH (''))
,1,2,'') AS ResourceInitialsCombined,
STUFF((
SELECT ', ' + ResourceName
FROM #TempTable
WHERE (TaskUID = Results.TaskUID)
FOR XML PATH (''))
,1,2,'') AS ResourceNameCombined
FROM #TempTable Results
GROUP BY TaskUID,ProjectUID,ProjectName,TaskName
DROP TABLE #TempTable
-Prashanth

Connect to database failed,rc=-10709 Connection failed (RTE:Database name)

Hi gurues, I'm facing this issue with an IDES on MaxDB with Windows.
System was up and running until someone tries to make an upgrade of the kernel. Since then we can not start our system. we tried to rollback kernel release to the previous one but it didn't work.
When we start our system from MMC console we can see all process in green but work processes are in RUN state and after a few minutes they goes down with the following error
trc file: "dev_w0", trc level: 1, release: "701"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Mon May 16 23:57:31 2011
B create_con (con_name=R/3)
B Loading DB library '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' ...
B Library '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' loaded
B Version of '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' is "700.08", patchlevel (0.24)
B New connection 0 created
M sysno      00
M sid        SED
M systemid   562 (PC with Windows NT)
M relno      7010
M patchlevel 0
M patchno    32
M intno      20020600
M make:      multithreaded, Unicode, 64 bit, optimized
M pid        212
M
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 212) [dpxxdisp.c   1348]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm)          22784     (1752)
M DpShMCreate: sizeof(tm_adm)          5912704     (29416)
M DpShMCreate: sizeof(wp_ca_adm)          24064     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm)          552080     (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm)          0     (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1864)
M DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000B2C0050, size: 6607136)
M DpShMCreate: allocated sys_adm at 000000000B2C0050
M DpShMCreate: allocated wp_adm at 000000000B2C2270
M DpShMCreate: allocated tm_adm_list at 000000000B2C7B70
M DpShMCreate: allocated tm_adm at 000000000B2C7BD0
M DpShMCreate: allocated wp_ca_adm at 000000000B86B450
M DpShMCreate: allocated appc_ca_adm at 000000000B871250
M DpShMCreate: allocated comm_adm at 000000000B873190
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000B8F9E20
M DpShMCreate: allocated gw_adm at 000000000B8F9EA0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000B8F9ED0
M DpShMCreate: allocated wall_adm at 000000000B8F9EE0
M
M Mon May 16 23:57:32 2011
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host sirillium1
M
M Mon May 16 23:57:33 2011
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.024 (Make PL 0.32)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C    (0.024) Default value for max. input variables is 2000 (note 655018)
C    (0.024) Profile parameter to define max. input variables (note 655018)
C    (0.024) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)
C    (0.024) Input parameters for SQL statements increased (note 655018)
C    (0.018) Create index serial for MaxDB 7.6 (note 1267841)
C    (0.018) More trace in case of packed to string conversion error (note 1262799)
C    (0.016) R3trans export aborts with signal 6 (note 1262245)
C    (0.009) IA64 alignment errors (note 1245982)
C    (0.007) Support DB-Type 'SAP DB' by UPDSTAT (note 1225668)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0    BUILD 007-123-091-175
C SQLDBC Library Version : libSQLDBC 7.6.5    BUILD 015-123-202-938
C SQLDBC client runtime is MaxDB 7.6.5.015 CL 202938
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data   : 1
C SQLDBC supports keepAlive indicator   : 0
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
[dbsdbsql.cpp 137]
B ***LOG BV3=> severe db error -10709    ; work process is stopped [dbsh#2 @ 1203] [dbsh    1203 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1449]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10563]
M
M Info for wp 0
M
M    pid = 212
M    severity = 0
M    status = 0
M    stat = WP_RUN
M    waiting_for = NO_WAITING
M    reqtype = DP_RQ_DIAWP
M    act_reqtype = NO_REQTYPE
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source =
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M    mode_cleaned_counter = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server sirillium1_SED_00 on host sirillium1 (wp 0)
M * ERROR       ThInit: db_connect
M *
M * TIME        Mon May 16 23:57:33 2011
M * RELEASE     701
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        10783
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 212) [dpnttool.c   334]
We check several entries on this SDN site, and look for a lot of notes on the marketplace, and they always are related to default user in xuser files, but our xuser list output is ok. We have a DEFAULT connection to SAPSID user, a DBM connection to CONTROL user and a USERDBA connection.
XUSER Entry 1
Key         :DEFAULT
Username    :SAPSID
UsernameUCS2:S.A.P.S.E.D. . . . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :SID
Nodename    :server1
Sqlmode     :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset     :<unspecified>
XUSER Entry 2
Key         :c
Username    :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :SID
Nodename    :server1
Sqlmode     :INTERNAL
Cachelimit :-1
Timeout     :-1
Isolation   :-1
Charset     :<unspecified>
XUSER Entry 3
Key         :c_J2EE
Username    :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :SID
Nodename    :server1
Sqlmode     :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset     :<unspecified>
XUSER Entry 4
Key         :w
Username    :SUPERDBA
UsernameUCS2:S.U.P.E.R.D.B.A. . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :SID
Nodename    :server1
Sqlmode     :INTERNAL
Cachelimit :-1
Timeout     :-1
Isolation   :-1
Charset     :<unspecified>
Any idea? we are out of ideas at this moment.
Regards
Edited by: Gustavo Goicochea on May 17, 2011 6:37 PM

Natalia, this system was not resored nor copied, it was up and running before kernel update. We did some of the tests you said and someothers, here are some outputs.
We update kernel to release 142
R3trans -d and -x exit with (all with user SIDADM)
SVERS table does exist and belongs to SAPSID
dbmcli on SID>sql_execute select * from domain.tables where tablename='SVERS'
OK
END
'SAPSID';'SAPSID';'SVERS';'';'TABLE';'TABLE';'20100406';'00054637';'20100406';'00054637';'20100406';'00054638';'NO';(null);20000;(null);x'0000000000004842';'NO';'NO';'YES';'NO';(null)
Why it still says that SVERS table does not exist and SQL error 942?
C Now I'm connected to SAP DB
C 00: server1-SID, since=20110518015619, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
C *** ERROR =>   prepare() of C_0000, rc=1, rcSQL=-942 (POS(28) Unknown table name:SVERS) [
dbsdbsql.cpp 1604]
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(28) Unknown table name:SVERS) [dbslsdb.cpp 7253]
C sc_p=000000000CFAECC0,no=0,idc_p=0000000000000000,con=0,act=0,slen=34,smax=256,#vars=0,stmt=0000000002EA0AF0,table=SVERS
C SELECT VERSION INTO ? FROM SVERS ;
B ***LOG BZA=> table SVERS      does not exist on database            [dblink#4 @ 1301] [dblink 1301 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c   1515]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10824]
M
Users seem to be ok
dbmcli on SID>sql_execute SELECT username, usermode FROM users
OK
END
'CONTROL';'ADMIN'
'SUPERDBA';'SYSDBA'
'SAPSID';'DBA'
'SAPR3';'DBA'
User SAPR3 does not have anything on database
dbmcli on SID>sql_execute select * from domain.tables where owner='SAPR3'
ERR
-24988,ERR_SQL: SQL error
100,Row not found
Any idea?
regards

Logical database names

hi experts,
pls give me the main logical databases names used for taking reports using SAP query in sq02.
ex hr- pnp,material ckm etc

Hi
Check the tables related to LDB's
LDBS
LDBT
T0220
see the doc on LDB
A logical database is a special ABAP/4 program which combines the contents of certain database tables. You can link a logical database to an ABAP/4 report program as an attribute. The logical database then supplies the report program with a set of hierarchically structured table lines which can be taken from different database tables.
LDB offers an easy-to-use selection screens. You can modify the pre-generated selection screen to your needs. It offers check functions to check whether user input is complete, correct, and plausible. It offers reasonable data selections. It contains central authorization checks for data base accesses. Enhancements such as improved performance immediately apply to all report programs that use the logical database.
Less coding s required to retrieve data compared to normal internel tables.
Tables used LDB are in hierarchial structure.
Mainly we used LDBs in HR Abap Programming.
Where all tables are highly inter related so LDBs can optimize the performance there.
Check this Document. All abt LDB's
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2flibrary%2fabap%2fabap-code-samples%2fldb+browser.doc
GO THROUGH LINKS -
http://www.sap-basis-abap.com/saptab.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9bfa35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c6/8a15381b80436ce10000009b38f8cf/frameset.htm
/people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
Re: **LDB**
www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_Logical_Database_FAQ.html
www.sap-img.com/abap/abap-interview-question.htm
www.sap-img.com/abap/quick-note-on-design-of-secondary-database-indexes-and-logical-databases.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db9bb935c111d1829f0000e829fbfe/content.htm
Gothru the blog which provides info on LDB's:
/people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
Reward points for useful Answers
Regards
Anji

Inserting paragraphs into a report based on a certain condition

Hi, I need some advice on the best method to insert paragraphs of text into a report.
I have +/- 100 paragraphs which are in text format, I need to insert these into the report based on certain conditions.
I have tried entering them into the trailer section one after the other and using conditional formatting to display them if the the condition is met. This works well but I ran out of space in the trailer section.
I then thought of saving the paragraphs somewhere on the server as seperate txt files and inserting them into the report using file links,
or I could put these paragraphs into a table and then insert them from there, some of these paragraphs are longer than 4000 characters,
Please advise on the best method
Thank you
Michael

Hi,
If the button and the textfield are on in the same subform then this code should work in the click event of the button
(This is JavaScript code so make sure the code is set to JavaScript and Client on the drop downs in the script window)
(assuming the name of the textfield is TextField1)
TextField1.rawValue = "some value";
If they are in different subforms then you have 2 options
Please note in both these options it is easier if the subforms have names ( I am assuming this to keep samples simple)
option 1 -
use the parent object to move up the tree till you are at the same level as that of the subform that contains the textfield
e.g.
(Click Event of the button)
this.parent.subformname.TextField1.rawValue = "some value";
option 2 -
Use the resolve node to make your way down from the top level of the form
xfa.resolveNode ("form1.subformname.TextField1").rawValue = "some value";
Hope this helps
Malcolm
p.s. I am making assumptions as the image/file you attached did not appear for me.

Insert Database Name onto Report

Similar Messages

Maybe you are looking for