Insert line numbers into a document, Insert line numbers into a document

Does anyone know how to insert line numbers into a pages document?

One of the crude, but easy, workarounds is to Insert a 1-column table (zero Header Rows), Floating, and Fill the column with ascending numbers. Position the column in your left margin and adjust the row height to match your line spacing. Things will line up better if your body text is styled with line height set to "Exactly". When you have the alignment satisfactorily close, click once on the border of the table to select the entire table and go to the Graphic Inspector and set Stroke to None. Then, while the table is still selected, Format > Advanced > Move Object to Section Master to get it to appear on following pages.
Jerry

Similar Messages

Fatal Internal Error: "image.cpp", line 13192 when trying to insert a cursor to graph

NOTE: This IS a duplicate post from the Breakpoint. Text slightly changed. The post in Breakpoint can be deleted. All comments should be placed in this thread.
I resolved the "Fatal Internal Error: "image.cpp", line 13192 when trying to insert a cursor to graph", but would like to share to find out if others have seen this and to determine whether this is a bug, or if it's time to redo my PC, or buy a new one..
I have an existing graphs (qt 6) which originally had 2 cursors. This occurred while trying to add the third cursor.
Up until attempting to add the last cursor, the program worked great, and I had been running tests for a while. However, I do recall seeing this problem when creating the original cursors, but not to this extent. Plus I don't remember the original error message from that time.
I needed to add one more cursor to the existing graphs. As soon as I add a new cursor and set it's properties, I get a nasty error message and without warning LV8.2 simply closes itself (well, the only warning was the error message. Tried it 3 times, same result.
Here are the steps:
Shut down the PC, went for a coffee, rebooted the PC. Opened the LV project, opened the VI. Immediately went to the graph properties to add the new cursor by doing the following steps:
Right click graph indicator icon on block diagram.
Select Properties.
Click on cursor tab.
Click on Add
Select Cursor 2 (3rd one, newly created)
Change color
Select cursor as a line
Remove checkmark for "show cursor"
Click OK
I need to do this to 3 other graphs, same steps. And as soon as I get to the step before clicking OK, I get the error message.
I managed to get an additional one done, by immediately saving after each step (yep going in & out of the properties). But I've had this problem before when creating the first two cursors.
Is it a bug? Anyone else seen this? Using LV8.2. And the message is right about LOOSING ALL unsaved work!!!!
Here are more observations:
Tried creating a new one on the second graph. As soon as I clicked on the color, it crashed!
See the error explanation below. It is really clear, now anyone can solve it LOL!!... According to the error log, there's a bad image out there
.\manager\image.cpp(13192) : DAbort: bad image in ValidateImage
$Id: //labview/branches/Europa/dev/source/manager/image.cpp#47 $
0x007A81E8 - LabVIEW <unknown> + 0
0x007A7BDB - LabVIEW <unknown> + 0
0x00829D74 - LabVIEW <unknown> + 0
0x008546CD - LabVIEW <unknown> + 0
0x00C054E6 - LabVIEW <unknown> + 0
0x0081B9C8 - LabVIEW <unknown> + 0
0x0081EB9A - LabVIEW <unknown> + 0
0x0084D9D4 - LabVIEW <unknown> + 0
0x00854663 - LabVIEW <unknown> + 0
0x00C054E6 - LabVIEW <unknown> + 0
0x0085F7A1 - LabVIEW <unknown> + 0
0x00BBACDD - LabVIEW <unknown> + 0
0x00C06A2F - LabVIEW <unknown> + 0
0x0085AA46 - LabVIEW <unknown> + 0
0x00C06A2F - LabVIEW <unknown> + 0
I observed the title bar after making changes to the properties. I noticed that 3 out of 4 times, while changing the properties of the graphs to include the cursor, and saving after each & every step, that there were no stars appearing on the title bar to indicate "unsaved changes". Saving was also much slower than usual. I suspect, the program never got to placing the star before saving occurred. However, I am noting everything.
After creating the cursors, saving was and is normal, and the program runs well.. I have run tests without problems.
Does anyone have a clue at what causes this? Has anyone seen this before?
Thanks,
RayR

Hi Donovan,
I can't remember seeing this elsewhere. When I get a chance, I'll create a new (blank) vi with new graphs and will repeat the steps.
I will let you know if I see this in the new vi.
Thanks!
RayR

I`d like to know how can i insert documents, xls/doc/pdf into iCloud and have them in my iPhone and my iPad. I just found one way, through ibooks, but i think it isn't a practical option.

I`d like to know how can i insert documents, xls/doc/pdf into iCloud and have them in my iPhone and my iPad. I just found one way, through ibooks, but i think it isn't a practical option.

Just use Drop Box instead.

Inserting a new extension field in the line item details page

Hi!
Is it possible to insert an extension field/collection in the line item details page of the master agreement? I have tried supplying several Field ID found on that page on the DISPLAY AFTER field of the extension, but nothing works - the new field still gets displayed at the header page.
Thanks in advance.

Hi,
Line Item is an independent class. You cant add an extension to Line Item through Master Agreement. This is the reason why the extension you add appears on the header tab of Master Agreement.
When I go to create an extension definition, I don't find Line Item in the drop down of Extended Class Name. So, my guess would be that we cannot create an extension definition for Line Items.
Let us know if you, or anybody, has a way to achieve it.
Thanks
Devesh

XML document convert into String and Insert into Database

Hello all,
In the FIle to File Scenario I want to send the data to the Reciever System in xml Document and convert into String and insert into Database.
Please can you tell me exact way how to send it.
Thanks & Regards,
Raj

HI,
As per my understanding your scenario is File to file where you will get output fiel in XML format.
Now that XMl payload need to be passed as single string in the database via XI.
You cauld do this but you need to imply some manipulations such as
With the help of standard API you need to concatenate the XML tags and create the structre along with the data.
For e.g. in your outpuf file the XML structre contain data as
<field1>ABCD</field1>
Then in mapping
The source field will be mappeda s concat(<field1>) + value of Source field "ABCD" + concat(</field1>) to the target field.
This is the way that you could achive the requirments else there is no direct way avaialble for it.
thanks
Swarup

Sorry, we are having some temporary server issues. You can work off line if you plan to insert pictures from your computer

We have about 200 users that connect to three terminal servers. On the servers we have Office 2013 installed. Several users are stating that when they attempt to search for templates or insert Online Pictures, they are getting error messages of "Sorry,
we are having some temporary server issues. You can work off line if you plan to insert pictures from your computer"
Remember, they are connecting to a terminal server, all have roaming profiles, and for some users this works fine.
We've Googled the error message and found no help. A lot of responses was to reset the IE settings, which we've tried to no avail.
Also as a test, we took one of the users that was having the issue and deleted their profile. When they logged back on the server, the same problem occurred again.
We're currently at a loss as to why it works for some users and not others?
Any ideas out there?

You can refer to this link and find the possible solution which is to delete the offending registry key:
HKCU\Software\Microsoft\Office\15.0\Common\Internet\WebServiceCache\AllUsers\office15client.microsoft.com
http://angrytechnician.wordpress.com/2013/05/15/office-2013-error-sorry-we-are-having-some-temporary-server-issues/
There we can also find information about deploying logon script to all roaming profile users to resolve this issue.

Extra spacing between words in a line when an icon is inserted

Why do i see extra spacing between words in a line when an icon is inserted. Can someone please help me fix this issue as this is affecting readability?

Third option is to reference the image and show it below the paragraph.
The size of the image is in your control and if it needs more space than the text, it is going to take it.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How to insert the XMLComments - Contents in same paragraph line -Reg.

Dear All, I have a big doubt. I can get the xmlComments value, through scripting. Is it possible to insert that values are in the Same Line or where we get the Position of line of the comment. (i.e) <para>sample sample sample samplesample samplesample samplesample samplesample samplesample samplesample <comment> sample sample samplesample samplesample samplesample samplesample sample</para> The above example shows as para Tag and Comment tag. The comment tag's having some text [Hide]. I can get the xmlComments value. But I can't insert the values [where we get the value] in the Same line, Is't possible in CS2?... Please let me know if I need to give you any further information, and give me the solutions [Possible or not Possible]? and clarifications. Thanks & Regards T.R.Harihara SudhaN

Hi ....This is visvanathan here..
please anyone send me the InDesign JavaScript code to apply the Table of Content to the InDesign Book....
please urgent......
If u can please send me to my personnel email id
Email: [email protected]
Thanks&Regards
Visvanathan M

Updating documents - adding batch numbers to lines

Using the DI Server, we want to be able to update a document (such as a Goods Receipt PO) and create batch numbers for lines where the item on the line is set to batch on release only (hence we were able to create the document with no batch numbers on in the first place).
Currently, when we do this, no error comes back from the DI Server, but the batch numbers are not added.

Hi Jim,
Adding lot numbers to pick tickets would not be possible (out of the box)
Suda

Sites w/ .pdf or .ashx documents as the full page or as an insert in the page don't load the .pdf or .ashx documents - I get an Problem Report window that says "Firefox Plugin Process quit unexpectedly"

Sites w/ .pdf or .ashx documents as the full page or as an insert in the page don't load the .pdf or .ashx documents - I get an Problem Report window that says "Firefox Plugin Process quit unexpectedly" and sends the error to Apple so I have had to revert to Firefox 3 getting rid of 4. Anybody have any thoughts?? (I'm runnng OSX 10.6.7)
pdf was at
<http://www.brigham.com/MSDS/Dust%20Mop-dust%20cloth%20treatment.pdf>
ashx was my utility bill on
<www.pse.com>

OK, I think I have this solved. After reading my post over, I decided to rethink the problem. First thing I did was download Chrome and I tried using that and IE again and surprise! I was having the same problem on those browsers as well. So now we know it wasn't Firefox. I then figured maybe a slow computer meant a virus, so I ran scans. I've had both Avast and IOBit for months now and I've never had a problem with either of them before. Then I downloaded Malwarebytes and ran a third scan. They all picked some stuff up, but nothing serious. Then I tried disabling all the antivirus stuff and that didn't solve anything. But then I decided to keep Malwarebytes and I uninstalled IOBit Security and whammo - problem solved.
I have no idea why out of the blue IOBit would be causing a problem like this so if someone knows, please let me in on the secret. Additionally, IE was working fairly well last night but not this morning. I also don't know why removing IOBit would take care of the nsAppShell issue, because supposedly, that's related to Firefox plug ins. And one more thing...when Comcast hooked my neighbor up to cable, they did it by putting a splitter on my line. They were messing about with the lines yesterday before I got on my computer last night trying to decide how to rerun them and today they did that, taking the splitter off my line and giving my neighbor his own line. That was finished about 30 minutes before I uninstalled IOBit. So....who knows?
But I ain't about to look a gift horse in the mouth. I have my Firefox back and I am so sorry for bad mouthing you last night - I love you, Firefox!

Acrobat 9 - Document Insert From Scanner

In Acrobat 9, there needs to be a
Document > Insert > From Scanner
Document > Scan to PDF
is good for creating new documents, but is not suited for quickly scanning and inserting a page into your current PDF. To insert a page, it creates a new document and then requires you to drag and drop the page to the original document. This seems like an unnecessary multi-step process just to insert a page.

Great post very useful so I have painful to do this with my scanner canon please can you help me

EXTREMELY SLOW XQUERY PERFORMANCE AND SLOW DOCUMENT INSERTS

EXTREMELY SLOW XQUERY PERFORMANCE AND SLOW DOCUMENT INSERTS.
Resolution History
12-JUN-07 15:01:17 GMT
### Complete Problem Description ###
A test file is being used to do inserts into a schemaless XML DB. The file is inserted and then links are made to 4
different collection folders under /public. The inserts are pretty slow (about
15 per second and the file is small)but the xquery doesn't even complete when
there are 500 documents to query against.
The same xquery has been tested on a competitors system and it has lightening fast performance there. I know it
should likewise be fast on Oracle, but I haven't been able to figure out what
is going on except that I suspect somehow a cartesian product is the result of
the query on Oracle.
### SQLXML, XQUERY, PL/SQL syntax used ###
Here is the key plsql code that calls the DBMS_XDB procedures:
CREATE OR REPLACE TYPE "XDB"."RESOURCEARRAY" AS VARRAY(500) OF VARCHAR2(256);
PROCEDURE AddOrReplaceResource(
resourceUri VARCHAR2,
resourceContents SYS.XMLTYPE,
public_collections in ResourceArray
) AS
b BOOLEAN;
privateResourceUri path_view.path%TYPE;
resource_exists EXCEPTION;
pragma exception_init(resource_exists,-31003);
BEGIN
/* Store the document in private folder */
privateResourceUri := GetPrivateResourceUri(resourceUri);
BEGIN
b := dbms_xdb.createResource(privateResourceUri, resourceContents);
EXCEPTION
WHEN resource_exists THEN
DELETE FROM resource_view WHERE equals_path(res, privateResourceUri)=1;
b := dbms_xdb.createResource(privateResourceUri, resourceContents);
END;
/* add a link in /public/<collection-name> for each collection passed in */
FOR i IN 1 .. public_collections.count LOOP
BEGIN
dbms_xdb.link(privateResourceUri,public_collections(i),resourceUri);
EXCEPTION
WHEN resource_exists THEN
dbms_xdb.deleteResource(concat(concat(public_collections(i),'/'),resourceUri));
dbms_xdb.link(privateResourceUri,public_collections(i),resourceUri);
END;
END LOOP;
COMMIT;
END;
FUNCTION GetPrivateResourceUri(
resourceUri VARCHAR2
) RETURN VARCHAR2 AS
BEGIN
return concat('/ems/docs/',REGEXP_SUBSTR(resourceUri,'[a-zA-z0-9.-]*$'));
END;
### Info for XML Querying ###
Here is the XQuery and a sample of the output follows:
declare namespace c2ns="urn:xmlns:NCC-C2IEDM";
for $cotEvent in collection("/public")/event
return
<cotEntity>
{$cotEvent}
{for $d in collection("/public")/c2ns:OpContextMembership[c2ns:Entity/c2ns:EntityIdentifier
/c2ns:EntityId=xs:string($cotEvent/@uid)]
return
$d
</cotEntity>
Sample output:
<cotEntity><event how="m-r" opex="o-" version="2" uid="XXX541113454" type="a-h-G-" stale="2007-03-05T15:36:26.000Z"
start="2007-03-
05T15:36:26.000Z" time="2007-03-05T15:36:26.000Z"><point ce="" le="" lat="5.19098483230079" lon="-5.333597827082126"
hae="0.0"/><de
tail><track course="26.0" speed="9.26"/></detail></event></cotEntity>

19-JUN-07 04:34:27 GMT
UPDATE
=======
Hi Arnold,
you wrote -
Please use Sun JDK 1.5 java to perform the test case.Right now I have -
$ which java
/usr/bin/java
$ java -version
java version "1.4.2"
gcj (GCC) 3.4.6 20060404 (Red Hat 3.4.6-3)
sorry as I told you before I am not very knowledgeable in Java. Can you tell me what setting
s I need to change to make use of Sun JDK 1.5. Please note I am testing on Linux
. Do I need to test this on a SUN box? Can it not be modify to run on Linux?
Thanks,
Rakesh
STATUS
=======
@CUS -- Waiting for requested information

How to insert the data which is present in the variable into the table

Hi,
Let's consider that I have one table and I have stored the table column names in one variable and their values in another variable.
I want to insert the data that is present in the variables into the table.
I tried the following way :
Declare
V_columns    Varchar2(50) := 'Empno';
V_values       Number(10) := 101;
Begin
Insert Into Emp (V_columns) Values (V_values);
End;
The above procedure gives an error : PL?SQL : ORA-00904 : "V_COLUMNS": invalid identifier
Using the Execute Immediate, we can insert the data which is present in the variables into the table.
Is there any other way to insert the data which is present in the variable into the table..?
Can anyone please give me the solution..?
Thanks..

plz use this...
DECLARE
   v_columns   VARCHAR2 (50) := 'Empno';
   v_values    NUMBER (10)   := 101;
BEGIN
   EXECUTE IMMEDIATE    'Insert Into Emp ('
                     || v_columns
                     || ') Values ('
                     || v_values
                     || ')';
   COMMIT;
END;

Multiple asset numbers in Single PR/ PO line item

Hello,
If we enter multiple Asset Numbers in single PR/ PO line item then we get following error message while doing GR -
' Entry 7100000256 00001 not in table XACCOUNTING (system error) '
Message no. M7000
For this PO, in account assignment we have selected 'Distribution' as 'Distribution on quantity basis' and 'Partial Inv' as 'Distribute to following row'
In case of procurement of materials like chair, we are procuring few hundred materials and for each chair we are creating one asset number.
Please help to resolve.
Regards,
Milind Dumbre
Edited by: Milind Dumbre on Feb 2, 2011 3:24 PM

Hello,
Check these SAP notes 1386249, 1550451 is relevant for you. These notes are applicable for your system. these notes are non industry specific.
You can try these note , i think your problem may get resolve.
Regards
Mahesh Naik

How to reverse a FI document with line item that is cleared and archived.

Hi all,
Appreciate your help on this.
I have a FI document, say 1000001 with 3 line items.
line 1 and 3 is open. line 2 is cleared by document 1000002.
1000002 is subsequently being archived.
Now, is there any way to reverse document 1000001?
I can no longer do a FBRA (reverse and reset) since 1000002 is already archived.
Please help!
Thank you,
Lai San

Hi Lai San,
Dont know whether this helps.. but just a thought....
i came across a note regarding reversal of an SD document when the corresponding FI document was already archived.. reversal was not working due to a program error (SAP note 410590). does the FI doc reversal also work on lines with SD doc reversal? (iam a layman here ) maybe u can consult SAP?
Regards,
Naveen

I created a Pages document inserting 2 columns using 1) Inspector 2) Layout 3) columns. How do I decrease the height of the column. Have tried to use cursor and drag down the top border, but that does not reset the top border.

I created a Pages document inserting 2 columns using 1) Inspector 2) Layout 3) columns. How do I decrease the height of the column. Have tried to use the cursor and drag down the top border, but that does not reset/decrease the top border.

Set your columns back to one for the moment. In layout mode, insert a Text box. Place it in the upper left corner of your document, and drag down and right to the size of the container for your two columns. Click inside the Text Box, and now bump up your columns to 2. Your two columns are now contained in this resizable Text Box.

Insert line numbers into a document, Insert line numbers into a document

Similar Messages

Maybe you are looking for