Inspection lot numbers are missing ... ?

Dear friends
in quality inpection lots for 01 type inspection , the lot numbers are missing alternatively.... for eg. lot numbers as 1,3,5.......etc.
Only now and then I am getting serial numbers...........Please analyse the root cause.

Hi,
Regarding the pattern, I would say it is always unpredictable.
Although the buffer is provided as 50 & system is supposed to pick the same, my exprience is that it is not fixed specially in case of inspection lot.
We do have same buffer but the lot number creation is uneven. This will be for initial few lots & it will be stabilised eventually.
This is not the thing to worry but still it concerns you a lot then you can raise the ticket to SAP with priority as high. The buffer making zero at this time won't be of much help as the numbers are already created.
Hope this helps you.
SmanS

Similar Messages

  • Why Inspection lot numbers are not in sequance?

    Hi All,
    In my business scenario I am creating inspection lot for inspection type 01. System does not create the inspection lot number in sequence for example if I do the GR system creates the inspection lot number say 1000000016, and after some time if I do the GR for the same PO and material I am getting the inspection lot number 1000000019, 25,35,175,225 like this? can some one let me know on this why this is happening? I checked in QALS table for the list. All created inspection lot numbers are not in sequence?  Pls let me know
    Thanks & Regards
    Kundan

    This has been asked and answered many times in the past.  Please search the forum.  Google before posting!
    Please review this topic:
    Inspection lot number ranges skipping
    It has way more info in that topic than you probably ever want to know. 
    I have it on good authority that Craig is a very good consultant.     And Isabelle is an SAP employee and also responded about the issue.
    FF

  • Inspection lot stock window missing in qa11

    Dear Gurus
    I want to inspect the lots that are generated while goods posting in mb31 mvt type101 after process order.For that in material master quality view I have taken inspection type 04 ,did an inspection plan (qp02).Now after doing the process order and after recieving the goods a lot is getting generated.While I am doing the usage decision I couldnot do the goods
    posting from quality stock to unrestricted as Inspection lot stock window missing in qa11. What else should I do ?
    Regards
    Sandip Sarkar

    Hi,
    This specific lot does seem to me like it is manually created, there is no system status to say SPRQ or SPCO, therefore is doesnt appear to be stock relevant. You also mentioned that you can move the stock via MB1B, the system will not allow you to do this if the stock in question is being managed by an inspection lot, it will give you an error that the stock can be released via QM only.
    Check the material documents linked to the inspection lot 40000000006, does it display any material documents of type 1 (material document for lot creation)? if not then your lot is definitely manually created.
    Regards,
    Roderick

  • In AE02, Asset numbers are missing in production environment.

    Dear All,
    Some asset numbers are missing in production environment. Yours suggestions are more helpful.
    Regards,
    Anishwa.

    Hi,
    created Asset number ranges-AS08

  • SAP QM - Inspection Lot Stock tab missing in QA11

    Hi,
    My scenario is raw material inspection and I executed the scenario as follows
    Step 1 : Assigned 01 inspect type to the material in QM view .
    Step 2 : Created three MIC's
    Step 3 : Created Sampling procedure
    Step 4 : Created inspection plan for material by assigning MIC's & Sampling procedure to operation.
    Step 5 : Goods receipt of 100 Qty for the material through purchase order.
    Step 6 : Created Inspection lot for material.
    Step 7 : Inspection lot selection for material and recorded the results.Then valuated the results and i reject 2 out of 3.
    Now I have to post the some qty to unrestricted use & some qty to vendor i.e return delivery. To do the same, inspection lot stock tab is missing in QA11.
    Pls suggest if I missed any thing in this process.
    Thanks in advance.
    With Regards
    Srinivas

    Hello NiTiN J,
    I will clear the confusion.
    As I described the scenario in my first post, I have created inspection lot manually (QA01), then selected the same using QA32, here I had recorded the results & UD also. When I check in MMBE for unrestricted use stock, it is still showing under QI only. Then I  identified that Inspection lot stock was missing. So, I started posting in SCN (After searching).
    Mean while in the discussions I thought that, I completed RR & UD for the material. Now if any suggestions from expects won't applicable for my query. So, after Craig's recent discussion, for the same material once again I have done the GR through purchase order and created inspection lot manually.
    Now I found inspection lot (1st) through Material Document(i.e. MB51 as suggested by Mr.Craig)
    In QA32 (2nd) inspection lot, which is created manually.
    Now I have two inspection lots for the same material and I have not recorded the results nor UD for these lots. Just created and waiting for suggestions.
    And for 1st inspection lot , I tried to do results recording using QA11 also. But system through's error as shown in screenshot.
    I think I cleared the confusion.
    Pls correct me if I am wrong or missed anything.
    With Regards
    Srinivas

  • TS1292 The itune car I have has a bar code and numbers underneath, however some of the numbers are missing is there anyway I can use this card

    The itune card I have has a bar code and numbers underneath, however some of the numbers are missing is there anyway I can use this card?

    Hi,
    Here is a Support Article that will help:
    http://support.apple.com/kb/HT6021
    Cheers,
    GB

  • HT201209 Three of my numbers are missing how do I get it redeem

    Three of my numbers are missing how do I get it redeem

    If this page doesn't help then you will need to try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

  • System & Installation Numbers are missing from Service Manager

    Hi All,
    We have just upgraded a system from 2007A to 8.8 and when you start the Service Manager the System and Installation Numbers are missing. Any idea as to why?
    Best regards
    Earl

    Hi,
    Please note that this is on account of Number Range Buffering in SAP. You can check for itsu2019 settings in T.Code: SNRO for Object: RP_REINR.
    This is an SAP standard functionality and, there is no need to touch these settings. You can refer the below link:
    http://help.sap.com/saphelp_nw04/helpdata/en/95/3d5540b8cdcd01e10000000a155106/content.htm
    Regards,
    Kiron Kumar T.

  • Trip numbers are missing from Ranges

    Hi,
    We have define trip number ranges Personnel Area wise starting form 000000 to 999999, During trip creation, some trip numbers are missing in production system..
    for example : trip number 25 to 30 is not available , 21,22,23 24 and then 31,32,33...
    Any idea?
    Regards,
    Muhammad Umer

    Hi,
    Please note that this is on account of Number Range Buffering in SAP. You can check for itsu2019 settings in T.Code: SNRO for Object: RP_REINR.
    This is an SAP standard functionality and, there is no need to touch these settings. You can refer the below link:
    http://help.sap.com/saphelp_nw04/helpdata/en/95/3d5540b8cdcd01e10000000a155106/content.htm
    Regards,
    Kiron Kumar T.

  • Invoice numbers are missing

    Hello friends while creating invoice the numbers are missing, for example we assign number range between 1 to 100 for a perticular invoice, once the invoice is created the system should take invoice number between 1 to 100 in a sequential manner ,  if the previous invoice number is suppose 55 the next invoice numbers should be 56,57,58... but my problem is after 55 it is taking as like 63, what could be the reason for this, can any one of you help me
    Thanks in advance,
    vk

    HI
    Start Transaction SNRO and enter the affected object.
    - Choose the pushbutton 'Change'.
    - Deactivate buffering: Choose 'Edit' -> 'Set Up Buffering' -> 'No Buffering'.
    - If you only want to change the buffer size, enter the corresponding value in the field 'No. of numbers in buffer'.
    - Save the changes.
    Please note that this change is a modification. The modification is overwritten as soon as the affected number range object is redelivered - in other words, you must check the change manually each time you import a release.
    Object for Customer Number Ranges is xxx
    To Summurize:
    Check T.Code: SNRO
    Object: xxx
    No. of numbers in buffer: maintain it as '0'
    Sail

  • My Adobe - all my previously registered product serial numbers are missing!

    I logged in to my adobe today using the same account I have used for years.
    I found that all my registered product serial numbers are missing.
    On previous log ins this list correctly showed all my adobe purchases.
    There must be about a decade's worth of purchased serial number now
    missing from this list.
    I had logged in to check my cs5.5 serial number in order to purchase a
    creative cloud subscription.
    However, finding all my details missing has put me off buying more products.
    Is the wiping of the data a temporary database problem at your end?
    or will this permanently affect my ability to upgrade products and services?

    Palaab wrote:
    …I contacted customer support and he asked for my serial number and then told me he can't help with this issue and I need to look in these forums for a solution…
    Most irresponsible, ignorant and unprofessional of that nincompoop who sent you to the forums for a customer service issue.
    Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.  There's no one here who can help you.
    Click on the link below, and after that click on "Still need Help? Contact us."
    Then on the next page, click Chat
    There is also a phone option.
    http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation

  • When I convert a Word doc to PDF, some of the page numbers are missing.

    I'm using Word 2003 and Acrobat Pro 7.0. When I print out the Word doc all the page numbers are there, but when I concert to PDF most of them are missing. Any suggestions?

    How are you converting? What are the job settings for the PDF conversion? What if you print to the Adobe PDF printer?

  • Editing text in PDFs - only the numbers are missing the font

    When editing text in a PDF (created in InDesign), I can edit all the text EXCEPT for any numbers. When I try to input a number, I get the message "The original font XXXX is not available or can't be used in editing. Acrobat is using the font Arial in its place". It then places other characters in its place - not sure what they are but they're not numbers. Anyone have any idea what is causing this?

    Sorry, I found my answer here:
    https://forums.adobe.com/thread/1582291?q=arabic%20numbers
    Apparently, the HINDI DIGITS checkbox under Preferences\Languages is by default checked. This ridiculous default resulted in Arabic numbers when editing the PDF in Acrobat. Editing text was fine, but whenever I would type in a number, it would appear as Arabic characters.

  • I updated 4s to 6,1,1 and all the phone numbers are missing in my contacts,

    How do I recover all my phone numbers?

    On iPhone, open Settings -> iCloud
    Turn OFF for “Contacts” option
    Select “Keep on My iPhone” option
    Close and Open Phone App, all your contacts should be back!
    Now go back to Settings -> iCloud -> turn ON for “Contacts” and select “Merge All” option.
    You are DONE.
    This was fix for updating to IOS5, but it sounds like you are having a similar issue to this.
    Full post here http://blog.initlabs.com/post/11390316577/how-to-restore-phone-contacts-lost-aft er-ios5-update

  • Document numbers are missing

    Hi All,
    The user has posted a document and the system has given the document number.
    But when we are tyring to display this document in FB03 the system is showing the error message as the document is not in the database.
    We have checked in the BKPF and BSEG tables. There also we did not find this document number.
    Could you please explain me what will be the reason for this?
    Regards
    RS

    Hi,
    Sometime back we got this similar kind of issue: I don't know the details of your entry.
    When i posted an FI invoice in Japanees currency with 9 digits, we got a message that document has been posted with xxxxx no, in company code xyz.
    But when i tried to display the document through FB03, we got a message that, this documnet has been archived or not posted.
    This problem was rectified by applying a an OSS Note.
    all the best
    Prasad

Maybe you are looking for

  • Branch office setup with L3 switch and router with IOS security

    Hello, I am in the process of putting together a small branch office network and I am in need of some design advise. The network will support about 10-15 workstations/phones, 3-4 printers, and 4-5 servers. In addition we will eventually have up to 25

  • SD report :correlation between SD line item and its FI line item

    Hi, We are developing a SD report where we are not able to correlate between FI line item with SD line item.As SD line item have differernt division so how to identify which line item of FI belongs to which SD line item?

  • In iCloud How to change wrong Apple ID?

    Hi, Have an Iphone 5C with uptodate  7.1.1 When I go into Settings , then iCloud, the Apple ID is wrong and Greyed out so I cant put the correct Apple ID into the iphone.  How do I change the Apple ID in the icloud settings??? Thanks in Advance   MJ

  • ITunes mixed some of my albums together

    I'm quite new to the iTunes-thing and I wanted to make sure every album had it's cover visible. So I selected all the songs in my iTunes library and some of the different boxes in the info menu (Artisit, Album, Genre, ...). This caused iTunes to put

  • Regarding display resolution options on the latest model

    I just purchased the the latest model. I've been using Mac for a few years and in each version there has been a "streched" option available for some of the resolutions. I've got too used to that. Right now it's set on 1024 * 640. Is there any way to