Install Arch with PXE?

Hello,
I'm trying to install Arch with PXE, and for this I'm using two VM in VirtualBox. I've followed all steps in the Wiki, also I tried to use a script ( https://wiki.archlinux.org/index.php/Ar … pxe_server ).
Following the main PXE wiki article, when I mount the archlinux-boot image, I can't find isolinux subfolder in order to copy contents into /var/tftpd/ folder. Article seems to be out of date.
¿Any idea? I've dhcpd server running and I executed mkpxelinux -c=/etc/mkpxelinux.conf command, but I don't know what I need to do right now.
Thanks for all.

Hi
nbd in 2010.05 images is old
nbd in your system is new
archiso-pxe-server script try to keep compatible with old (untested) and new nbd.
Try this on ramfs prompt:
nbd-client the-server-ip -N archiso /dev/nbd0 -presist
mount -r -t udf /dev/nbd0 /bootmnt
logout
Download a recent update archiso-pxe-server-20101012 (just now)
If does not work, try to build your archiso up-to-date using my branch that have the fix[#1]. See here how http://wiki.archlinux.org/index.php/Use … lean_build
[#1] http://github.com/djgera/archiso/commit … 9bc219ee30
Good Luck.
Last edited by djgera (2010-10-12 04:50:33)

Similar Messages

Install Arch with dual graphics laptop

Hey everybody,
So a few months ago I bought a new laptop, and ASUS X750JN. After I have my new laptop on my hands the first thing was install Arch Linux, but I came across an problem with graphics, probably a bad configuration and because I needed the computer for the university, I keep Windows for a while. Now that I have some time, I want to return to my beloved Arch but I have a serious question, the computer has 2 graphics cards, on-board Intel and an Nvidia and my question is, how can I install Arch and use Nvidia for some games like ETS, CS:GO and Guns of Icarus? When I tried installing before, the VGA was the Intel and not the Nvidia.
I know that Hybrid Graphics aren't full supported in Linux, but is there a way to use Arch with the Nvidia, even if only uses Nvidia.
Thanks in advance,
Have a nice Christmas and a Happy 2015,
Hugo Rodrigues.
Last edited by Hugao (2014-12-24 13:47:26)

Hey,
Sorry for the time but I'm was busy and only today I have the change to install Arch.
mrunion wrote:
Have you looked in our Wiki? We have these for starters:
https://wiki.archlinux.org/index.php/Bumblebee
https://wiki.archlinux.org/index.php/Optimus
When I was research I look it up on the second link but not on the first one.
So, like I said above, today I have installed Arch with Bumblebee and so far so good, but I just have a question, how I run games using optirun throw Steam?
Issa wrote:
Hey Huago, I'm not sure if will help you as I don't know too much about your configuration, but I'm also experiencing some issues while configuring arch on my lenovo T420s. I have so far succeeded in starting a simple x session after installing the drivers for intel and nvidia (xf86-video-intel xf86-video-nouveau) (see my thread here but my current problem is, that I can't start gdm
I'll work on this and opened a new thread here - maybe we can assist each other until everything is up and running.
update: I got it - maybe it works for you too? (very short description of what i did):
install drivers for integrated and discrete graphics card
launch gdm as root
I have an Asus X750JN and I just install the integrated and discrete graphics and enabled gdm service.

Installing Arch with intel wireless (iwlwifi-3945)

i have tried various times in the past few weeks to install arch with minimal success. The only time i was able to actually set up a system that would allow me to get to a gui and use the internet was when i had an install of Archie Linux (Live CD) that i had to chroot with kubuntu to add wireless support. Needless to say i preferred a cleaner install (especially after having to manually rename the folders, etc. for the repository changes).
Anyways when arch is loading it makes mention of needing to append the boot image to include intel-wireless. i was wondering what exactly was involved in doing that. Because after trying to just install the package ifconfig does not show my wlan device. Any help is appreciated. let me know if more info is needed.

pl2lnce wrote:
i have tried various times in the past few weeks to install arch with minimal success. The only time i was able to actually set up a system that would allow me to get to a gui and use the internet was when i had an install of Archie Linux (Live CD) that i had to chroot with kubuntu to add wireless support. Needless to say i preferred a cleaner install (especially after having to manually rename the folders, etc. for the repository changes).
Anyways when arch is loading it makes mention of needing to append the boot image to include intel-wireless. i was wondering what exactly was involved in doing that. Because after trying to just install the package ifconfig does not show my wlan device. Any help is appreciated. let me know if more info is needed.
I have Arch with iwl3945 drivers running here just fine. No tweaks to the cpio image needed.
I have never heard of this either... You need both the drivers and the firmware. Check dmesg if everything is okay. Ifconfig -a should show a wlan0 device, if not, something went wrong.
broch wrote:I have HP dv5000t (dualcore) with the same card. Never had any problems with intel 3945. However I am using ipw3945 instead of iwl3945 as the later is still early beta and far from stability, performance of ipw.
Since 1.1.0 stability is just fine. Throughput is still a problem though. I get like 2.8 MBps with earlier versions, and the 1.1.21 one can hit it too, but mostly it's around 1 MBps . I prefer that to yet another proprietary package though. It's not every day I transfer a few GB to my wired server .
Last edited by B (2007-11-15 18:12:18)

Installing Arch with UNetbootin, error

I'm trying to install Arch on my HP dv1040 laptop with UNetBootin and haven't been able to do much. When I boot up and select UNetbootin, linux starts running and decompressing and stuff but then it says "Waiting 30 seconds for device /dev/archiso" and fails to find it. I'm kinda lost for what to do. I've tried reinstalling UNetbootin like 5 times with different options such as using my iso image, or letting UNet download it for me. Can anyone help me?
I have WinXP as my current OS.

Solved for me.
sudo dd bs=8M if=archlinux-2009.08-netinstall-i686.img of=/dev/sdc
Works only for the netinstall images though. I'll get an error during install with core, but this might also be because my usb stick is fubar.
@celtic426
You should try to use the netinstall images with UNetBootin. I had no luck with the core ones and unetbootin though.
Another solution should be to boot from an ubuntu livecd/usb-stick (works with unetbootin, I already tried it) and then dd the image on the usb stick as the wiki says: http://wiki.archlinux.org/index.php/Off … tion_Media
Last edited by tealson (2009-08-16 23:21:41)

Trying to install Arch with Ubuntu hardy already installed

I have Ubuntu already installed on my system and I want to install Arch on a separate 10gig partition ( which is already made) but when I boot from the Arch cd and go to install Arch only sees the main drive it doesn't see anything else what am I doing wrong. I only want to install arch on the 10 gig partition for now until I am more familiar with Linux
Last edited by Shadowmeph (2008-05-20 17:35:28)

I have just read that it is informative but I am not sure of what that will do inorder for me to be able to install Arch on My tem gig partition, when I am in ubuntu I stat gparted to see what the names of my partitions are and this is what it shows /dev/sda3 swap 1gig /dev/ sda2 reiserfs 10 gigs ( where I want to install Arch) sda1 / Ubuntu how do I install arch onto dev/sda 2 ) the ten gig partition) if arch doesn't see it? do I have to delete the partition or formaste the 10 gig partition differently? I am pretty new to Linux so I am not sure of how to do this.
this is what my grub looks like
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
# examples
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=18573b0e-4906-4c7f-8e32-b544fd854ab5 ro
## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 8.04, kernel 2.6.24-16-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.24-16-generic root=UUID=18573b0e-4906-4c7f-8e32-b544fd854ab5 ro quiet splash
initrd /boot/initrd.img-2.6.24-16-generic
quiet
title Ubuntu 8.04, kernel 2.6.24-16-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.24-16-generic root=UUID=18573b0e-4906-4c7f-8e32-b544fd854ab5 ro single
initrd /boot/initrd.img-2.6.24-16-generic
title Ubuntu 8.04, memtest86+
root (hd0,0)
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
ok edit two I think that I have Arch install but I am not sure of which way to use
Dual booting with other linux distros
This is done exactly the same way that Arch linux is loaded. Here we assume that the other distro is on partition [s/h]da3.
title Other Linux
root (hd0,2)
kernel /boot/vmlinuz (add other options here as required)
initrd /boot/initrd.img (if the other kernel uses/needs one)
[edit] Dual booting with other linux distro (Chainloading)
To avoid maintenance nightmare, you might want to chainload the GRUB in the MBR to another bootloader you might have installed in the bootrecord of a partition [(hd0,2) in our example] instead of the MBR. This way the auto-magic stuff of some distro will manage the menu.lst on (hd0,2) (if it is grub) for its own distro and you will boot with all the option needed (like the correct last kernel) without the need to copy/paste some part of that menu.lst into yours.
In our example [1], GRUB is in the MBR and some other bootloader (BL) (be it grub or lilo) is in the Boot Record of (hd0,2).
| | | | % (hd0,2) |
| M | | | B % |
| B | (hd0,0) | (hd0,1) | L % Other |
| R | | | % Distro |
| | | | % |
| ^
| chainloading |
Then, you simply use in your menu.lst:
title Other Linux distro
root (hd0,2)
chainloader +1
Last edited by Shadowmeph (2008-05-20 17:56:20)

Installing Arch with USB

My laptop currently does not have a disk drive and I want to install Arch Linux as a dual-boot with Ubuntu 12.04. Do I just copy the Arch iso to a thumbdrive and get my computer to boot from the thumbdrive? When I do this a get a "Boot error."

Please read through the Beginner's Guide: it includes detailed instructions on how to do this: https://wiki.archlinux.org/index.php/Be … _USB_stick

How install Arch with Gentoo Live CD?

The Arch install Cd don't work at my new Laptop with external CDrom.
But I can boot from a Gentoo Live CD, how can I install Arch from the gentoo Live CD?
I have found these How To, but it is from another disri not a Live CD...
http://wiki.archlinux.org/index.php/Ins … her_distro

iphitus wrote:
fk wrote:
The Arch install Cd don't work at my new Laptop with external CDrom.
But I can boot from a Gentoo Live CD, how can I install Arch from the gentoo Live CD?
I have found these How To, but it is from another disri not a Live CD...
http://wiki.archlinux.org/index.php/Ins … her_distro
That will work for a liveCD too. I've done it a few times.
Really? Must I modify the How To?
Wich Live CD do you use?

Is it possible to install Arch with only WIFI available?

Hi, I want to install Archlinux on my thinkpad T60, but there is only WIFI at my room(with WPA), so is it possible to install Arch and set up to get a full GUI desktop environment? The problem is how to connect to internet via WIFI in command line only mode, is it too complicated? Is there a tutorial on this?
Thanks!

Olnex wrote:
Hi, I want to install Archlinux on my thinkpad T60, but there is only WIFI at my room(with WPA), so is it possible to install Arch and set up to get a full GUI desktop environment? The problem is how to connect to internet via WIFI in command line only mode, is it too complicated? Is there a tutorial on this?
Thanks!
'The beginners guide and the install guide in the wiki cover this, i believe it also has a section for connecting to an encrypted access point. So to answer your question: yes its possible and no its not too complicated and yes there is a tutorial on this
EDIT: Heres a link to where its at in the wiki https://wiki.archlinux.org/index.php/Beginners'_Guide#Wireless_Quickstart_For_the_Live_Environment just scroll down a little bit
Last edited by markbabc (2010-12-06 15:36:02)

Installing arch with less than 64mb RAM...

Hi!
Maybe I will need to install linux to old machines, pentium 2, with 64mb ram maximum...
I love archlinux... but, there is any way to install it with that ram amount?
(as I read that the new livecd install needs at least 192mb ram?)

Sorry, I didn't read your post correctly
This way, I guess you'll find this thread disappointing
http://bbs.archlinux.org/viewtopic.php?id=36615
Last edited by jlcordeiro (2009-06-03 05:00:02)

Newly installed Arch with gnome3 - Sound issue

Hello fellow archs!
I'm having such a huge issue at the moment with the sound.
Got alsa installed, and alsaconfig cant find a thing on my motherboard.
I will try to post the essential information so maybe someone will notice that I have done something wrong
lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
Now one wierd part:
Doing aplay -l in gnome terminal
aplay -l
aplay: device_list:240: no soundcards found...
Straight from terminal before starting gnome up
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC889A Analog [ALC889A Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC889A Digital [ALC889A Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
I checked in modprobe and tried to follow the guide http://ubuntuforums.org/showpost.php?p= … ostcount=2 but couldnt find my ACL889 inside the list for model, I just tried something.
# /etc/modprobe.d/modprobe.conf (for v2.6 kernels)
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
options snd-hda-intel model=6stack-dig
blacklist snd_intel8x0m
Please help! This new gnome3 looks really nice and nothing else except the sound issue seems to be wrong.
Thanks.

blargh wrote:
Hey guys, thanks for the help...
I was clicking around and noticed why i didnt get aplay -l correct. Wasnt it the group audio with my user..
But! I noticed something. I can't add my soundcard as my default one, but I can sure see it in alsamixer if I pick it.
I have been trying what the wiki been saying, either do it by kernel or use of the ~/.asoundrc which doesnt work as I get the message that the file is either to old or corrupted.
lsmod|grep '^snd' | column -t
snd_hda_codec_realtek 297871 1
snd_hda_intel 22186 0
snd_hda_codec 77703 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 6342 1 snd_hda_codec
snd_pcm 73736 2 snd_hda_intel,snd_hda_codec
snd_timer 19488 1 snd_pcm
snd 57384 6 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
snd_page_alloc 7161 2 snd_hda_intel,snd_pcm
ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 60 Jun 16 18:23 by-path
crw-rw----+ 1 root audio 116, 8 Jun 16 18:23 controlC0
crw-rw----+ 1 root audio 116, 7 Jun 16 18:23 hwC0D2
crw-rw----+ 1 root audio 116, 6 Jun 16 18:24 pcmC0D0c
crw-rw----+ 1 root audio 116, 5 Jun 16 18:24 pcmC0D0p
crw-rw----+ 1 root audio 116, 4 Jun 16 18:24 pcmC0D1c
crw-rw----+ 1 root audio 116, 3 Jun 16 18:24 pcmC0D1p
crw-rw----+ 1 root audio 116, 2 Jun 16 18:23 pcmC0D2c
crw-rw---- 1 root audio 116, 1 Jun 16 18:23 seq
crw-rw----+ 1 root audio 116, 33 Jun 16 18:23 timer
Tried to remove pulseaudio by sudo pacman -Rd pulseaudio.. but it has so many depencies so it doesnt let me.
Any Ideas?
wrong approach - if using gnome-shell it does need to be there.
I not only have an idea ~ but i do know how to fix your problem (i just need to read up, because off-hand i can't tell you how to do it).
i ALWAYS disable PA - because it is crap! i also think it is stupid that gnome -developers decided to make it a static dependency, when there are so many issues with it.
i'll get back to you in a little while, okay? (sometime later tonight, i just got home from work and need to relax / eat / etc..
cheerz

Is it possible to install Arch with encrypt $HOME?

Hello,
I'm going to buy a new laptop and i'd like to install Archlinux into it.
Ubuntu 9.10 gives you the choice to encrypt your home directory during installation.
Is it possible to do the same with Arch?
I read the WIKI about encryptions and it looks pretty "hard" to do it...?
Thanks in advance for your answers!

Dieter@be wrote:that information is outdated. Since 2009.08 you can do encryption and lvm with the arch installer.
I did not see that while installing - the encrypted $HOME with ecryptfs I mean.
Did I overlook it?
(I used the netinstall.iso)
anyway - with the help of the two guides mentioned by anrxc (and another post on the subject here in the forums) I got it working.
After setting up a group "ecryptfs", adding the user to it, then having the PAM-Rules ready and the ecryptfs module loaded it was then as simple as typing:
ecryptfs-migrate-home -u $USER
The PAM-Rules as they are now:
/etc/pam.d/login
#%PAM-1.0
auth required pam_securetty.so
auth requisite pam_nologin.so
auth required pam_unix.so nullok
auth optional pam_ecryptfs.so unwrap
auth required pam_tally.so onerr=succeed file=/var/log/faillog
# use this to lockout accounts for 10 minutes after 3 failed attempts
#auth required pam_tally.so deny=2 unlock_time=600 onerr=succeed file=/var/log/faillog
account required pam_access.so
account required pam_time.so
account required pam_unix.so
#password required pam_cracklib.so difok=2 minlen=8 dcredit=2 ocredit=2 retry=3
password optional pam_ecryptfs.so
#password required pam_unix.so md5 shadow use_authtok
session required pam_unix.so
session optional pam_ecryptfs.so unwrap
session required pam_env.so
session required pam_motd.so
session required pam_limits.so
session optional pam_mail.so dir=/var/spool/mail standard
session optional pam_lastlog.so
/etc/pam.d/gdm
#%PAM-1.0
auth requisite pam_nologin.so
auth required pam_env.so
auth required pam_unix.so
auth optional pam_ecryptfs.so unwrap
auth optional pam_gnome_keyring.so
account required pam_unix.so
session required pam_limits.so
session required pam_unix.so
session optional pam_ecryptfs.so unwrap
session optional pam_gnome_keyring.so auto_start
password required pam_unix.so
password optional pam_ecryptfs.so
Seems to work well so far - only compiling software from AUR has failed sometimes - maybe some mount-options not suitable for "fakeroot"?
I just put the build-directory outside of the encrypted $HOME and symlinked to it - then it worked.
...my first 4 days with ARCH - coming from Gentoo, which I used solely for at least the last 4 years - and I like it and intend to stay with it
I did try Mint (Ubuntu) - thats how I came to want to have my $HOME encrypted with ecryptfs.
But I was not quite happy with it and now I'm here with ARCH.
Cheers
Last edited by jomen (2010-03-18 03:11:06)

Install Arch with nfs shared pacman cache

Hello,
I would like to make a post of some information that worked for me. I think it could find its way into the wiki, but I prefer not to be the one to do that. Two reasons for that:
1. Just becuase it worked for me doesn't mean it is proper. If someone can confirm it is an acceptable method...
2. I am a wiki reader, not a writer
My situation is that I have a 3G internet conection. I like to only download the packages once... I run nfs4 exports from my desktop computer to share user data, pacman cache and sync folders See the Pacman tips I just did fresh installs of my systems. After the main system was running, I wanted to use the existing pacman cache to install the second system. I followed the Beginners guide and also used the Install from ssh article. I created my partitions with gparted on a live stick. Boot into the Arch install media, and follow the instructions for mounting the partitions. And here is where I make a brief detour to utilize my existing pacman cache.
For reference, my nfs exports are on the desktop computer (hostname is nas) and the pkg cache is exported as:
nas:/pkg
Databases are exported as:
nas:/sync
mkdir -p /mnt/var/cache/pacman/pkg
mkdir -p /mnt/var/lib/pacman/sync
mount the nfs exports:
mount -t nfs4 nas:/pkg /mnt/var/cache/pacman/pkg
mount -t nfs4 nas:/sync /mnt/var/lib/pacman/sync
Now I am back on track with the Beginners guide...
pacstrap -i /mnt base base-devel
While in the chroot, be sure to install nfs-utils (and openssh if you want to continue ssh after boot)
When running the genfstab, it will create tons of options for the nfs4 mounts. I edited those in nano to look like other references on the site:
nas:/pkg /var/cache/pacman/pkg nfs4 defaults,x-systemd.automount 0 0
nas:/sync /var/lib/pacman/sync nfs4 defaults,x-systemd.automount 0 0
And of course unmounting at the end of the Beginners guide requires unmounting these two directories too.

Yep, well capable of doing that which is why I'm asking - I can't do that without having to have difficult conversations with the security team here. And, no, I don't need to be told about the lack of security implications in doing this
As far as keys, I've just set the SigLevel to "Never" as I trust the packages on my workstation, but this all feels a little hinky.

Installing Arch with a rt2500 wireless card [resolved]

Well, is it possible or am I boned? Seems like the rt2500 drivers are beta and I can't seem to find realtek 8180 wireless drivers. I was going to just do an FTP install; is there anyway to stick the module in /addons or something? Should I just install the system from cd and load the module on a cd then install the module and load it from there?
I'm not really familiar with the way /addons works. It seems to just be a *.tar.bz2 that has a directory structure containing modules that extracts to /lib. Am I correct in assuming this? If so can I just tar up the rt2x00beta or rtl8010 driver from pacman and insert it into /addons on the iso and reburn?
Thanks in advance!
Edit: I've exausted all my ideas, as these are the only ethernet adapters I have access to on this machine. I tryed installing the system and moving the drivers from pacman over, but they were compiled for a different kernel. I'm going to try moving sources over next.

I finally resolved my issue; albeit a messy resolution. Basically what I did was a basic install from CD. After the installation I downloaded a CVS snapshot of the rt2500 sources from http://rt2x00.serialmonkey.com/wiki/index.php/Main_Page. I proceeded to make a 7zip archive of the sources and put them on a floppy. Moved the floppy over and did a "make" "make install" followed by a "modprobe rt2500".
After that I did the basic wireless setup "ifconfig ra0 up" "iwlist ra0 scan" and at long last I behold my access point.

Installing Arch on Asus Eee, Already Read the Wiki [Solved]

I'm attempting to install Arch on my Asus Eee 701 (4GB SSD model) and I made a mistake that I'm having trouble correcting. First, I accidentally wrote the image to my Eee's SSD, instead of my USB drive. I tried to install Arch with the installer on my SSD, set up the partitions (one for /, one for /boot, and one for /home), but when I issued the command, it told me that the disk was in use. It was then that I realized what I did. I used an Ubuntu LiveCD on another computer to burn the image file again, this time to my USB drive. I booted my Eee from the USB drive and tried to partition my SSD again, but this time, it tells me:
Device or resource busy
This disk is currently in use - repartitioning is probably a bad idea.
Unmount all file systems, and swapoff all swap partitions on this disk.
Use the --no-reread flag to suppress this check.
Use the --force flag to overrule all checks.
When I boot from my SSD, I get the same message, so I'm not even 100% certain that I booted from my USB drive before. My USB drive's activity light was on though.
Is there any way to fix this? Also, given that I have an SSD, what partitions should I set up and how big should they be? I can't find any concrete numbers in the wiki.
Thanks in advance for the help.
Last edited by Tyrian (2008-11-17 04:14:23)

I'll try that, thanks. What would happen if I dismounted the SSD with -f if it was in use?
EDIT: I just realized that when I go into the installer, it lets me set up partitions manually (I run the installer, pick "Prepare Hard Drive", "Partition Hard Drives", "/dev/sda"). But how should I set them up? When I test it by just making one 4GB partition, it tells me, "Wrote partition table, but re-read table failed. Reboot to update table." So I rebooted, and it appears to work. So I deleted that partition, made a 512MB one, rebooted, and repeated until I had 3 partitions in ext2, a 512MB (sda1, bootable), 512MB (sda2), and one roughly 2.5GB (sda3). I then went to "Set Filesystem Mountpoints", said "NONE" for the swap (due to the avoiding pitfalls section of the wiki), picked "/dev/sda1" as "/" in ext2, made "/dev/sda2" as ext2 called "/var", and made "/dev/sda3" in ext2 called "/home", then said "DONE". When I say "Yes" as the confirmation prompt, I get this message:
Error creating filesystem: mke2fs /dev/sda1
I hit enter and get dropped back to the "Prepare Hard Drive" menu. I followed this section of the Beginner's Guide too.
Is there any way to fix this?
Last edited by Tyrian (2008-11-15 18:37:10)

Formatting the encrypted hard drive or intalling OS again with PXE boot can change TPM owner password file?

Hello,
1) I realized that when MBAM bitlocker encryption start both Recovery key and TPM owner password file are send to MBAM server. If we change the computername of the notebook, we can find out Recovery key from MBAM server with the KeyID as we can read it from
computer screen, but we can not find out TPM owner password file with the existing new computername information from MBAM server, so we have to know old names of all computers but it is impossible. So we have to do decryption and clearing TPM than we
can again encrypted it with its new name. is it right?
2) We will going to deploy mbam encryption to our notebooks. But sometimes when a person quit the job his notebook can given to another person or new employee and based to our procedure when a notebook will given to another user it should installed
OS again with PXE boot. I would to know will it be enough to installing with this method again with a diffrent computer name or should I firstly clear its TPM than install OS with PXE to keep TPM owner password file missing as item 1?
I hope i can explain what i mean :)
Regards,
SibelM

I would suggest you to first decrypt the laptop and then follow the process:-
- Clear the TPM
- Encrypt the type.
- Check for the encryption behavior.
Cause I have found on some model that if the OS drive is encrypted, PXE boot fail on that machine even though I also did a direct PXE on an encrypted machine with clearing the TPM.
TPM ownership password is a hash file that gets generated with a set of algorithm. SO each time when you PXE boot, by clearing the TPM, the TPM hash password for the TPM will change. This has been done for security measures.
Gaurav Ranjan

Install Arch with PXE?

Similar Messages

Maybe you are looking for