Install db components

Hello all
Can You help me , where I can find (link) steps to install fb components like :
XDB, XML , OLAP .... It is some general link to find all this steps ?
thank You Brano

http://www.oracle.com/technology/documentation/index.html
You can search here.
Adith

Similar Messages

  • Service Deployment Fails on "Install VM components"

    I've been having an issue trying to deploy a basic service. It fails on the "Install VM components" step. I'm using VMM 2012R2 and this originally happened with a Hyper-V host of Server 2008R2 and then again with Server 2012R2. The error is 
    Error (22042)
    The service Base 2012 Test was not successfully deployed. Review the event log to determine the cause and corrective actions.
    Recommended Action
    The deployment can be restarted by retrying the job.
    Error (12710)
    VMM does not have appropriate permissions to access the Windows Remote Management resources on the server ( <HVserver>.<company>.com).
    Unknown error (0x80338105)
    Recommended Action
    1) Ensure that the Windows Remote Management (WS-Management) service is running on the server (<HVserver>.<company>.com).
    2) If the System Center Virtual Machine Manager service on your VMM management server is configured to run by using the machine account, ensure that there is not a group policy that does not allow adding machine accounts to a computer's Administrators group. If there is, you can use one of the following workarounds:
    - Disable the group policy in Active Directory Domain Services (AD DS)
    - Modify the group policy to allow the VMM machine account in the Administrators group
    - Move the machine account to its own organizational unit (OU) and block the group policy from being applied
    - Reinstall the VMM management server and choose the option to run the System Center Virtual Machine Manager service by using a domain account, and re-add all of your virtual machines.
    VMM is running as system but the machine account was added to the administrators group for the Hyper-V server. There's no group policy that would prevent this and I can launch Powershell from from VMM server as System and "Enter-PSSession" to the
    Hyper-V host as the machine account. I've also moved the Hyper-V host to an OU with no group policy just to rule anything out there and it still fails at the same spot. 
    Any suggestions on what I should try next?
    EDIT: Also, I can deploy from a VM template fine, but it doesn't look like a VM template uses the "Install VM Components" step. 

    I was just able to get it working on mine on a VMMR2 Cluster (hyper-v on 2012 and 2012 R2 hosts with the same success) and the Service Template using a VM template with Server 2008R2 Enterprise.  I don't know if you did the same steps but:
    created a fresh VM in VMM - install Virtual Guest Services.
    convert that VM to a VM Template - VMM then copies the VM files to a location on your VMM Library.
    create Service template using the new VM template - with no services.
    I've had problems in the past with trying to convert a VM to a template, and the VM would fail at the 'Fix up differencing disks' ..  It wasn't until I did a fresh install instead of trying to convert a VM copy of a copy of a copy of a V2V migration.. 
    Mine completes successfully but with an error couldn't install Virtual Guest Services when they are already installed.  hmmm..  The VM/Service is running fine however.
    ---------------------------- Error I got -------------------------------
    Error (13233)
    Unable to install Virtual Guest Services on virtual machine TEST_SERVICE. The Hyper-V Integration Services setup exited with error code 60001.
    Recommended Action
    For more information, refer to the Hyper-V documentation for virtual machine integration services at
    http://go.microsoft.com/fwlink/?LinkId=118036 and then try the operation again.

  • How to find the installed oracle components( oci , occi) versions?

    Hi,
    could you please help me to find out the version of installed oracle components?
    ex: which version of OCCI installed?
    one way is using OUI gui tool.
    I also got this info from oracle inventory file.
    under $ORACLE_HOME/inventory/ContentsXML/comps.xml
    But is there any best way or command to look for the same.
    Thanks,
    Krish

    The "best way" almost certainly depends on why you're looking for the information and what tool(s) you're using.
    If you're asking a human being to get the information, the OUI is generally going to be "better". If you're writing a program to get the information, parsing the inventory XML is likely to be "better".
    If you have multiple Oracle Homes on a single machine (particularly Oracle Homes with different major Oracle releases), though, or you have various failed/ incomplete/ obsolete installations on various machines, or if you're trying to figure out which version of the libraries would actually get used when a particular application starts up (assuming there are multiple applications on the machine), things start to get rather trickier.
    Justin

  • Installation of CS3 web premium failed to install shared components

    Hi all ,
    why is this installation so terrible even after two years of this product release!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! , I think adobe does'nt care to hear customers problems????
    here is my scenario :
    user rights : user with admin privileges .
    few weeks back i had some issue with the operating system due to some office suite installation hence i had to format my pc . After formatting i tried to install my software's back , when i tried to install CS3 web premium it showed the following error
    shared components failed to install
    adobe cs failed to install
    when i tried to open any of the successfully installed programs it said license stopped working
    i tried all possible steps mentioned in various blogs and forums , here is a list of steps i tried
    uninstalled the suite .
    Installed windows clean up utility.
    Downloaded the CS3 clean up script ran the same in all levels including the hidden levels 3 , 4..
    Downloaded and ran the flash uninstaller.
    disabled all services in the msconfig tab.
    disabled all start up programs in the msconfig tab.
    restarted the machine .
    installed the suite again .
    BINGGGGGGG same error shared components failed to install  *********** .
    *I also tried some postings regarding starting flexnet services in the services utility
    What is the issue i have been struggling with this for past one week and its driving me mad....any help would be greatly appreciated .
    ~ Sam

    In case anyone is still interested in this thread.  I called Adobe tech support and they were able to help me finally get CS3 installed.  The steps I took were kind of messed up because I'd try something and it still wouldn't work and then I'd try something else.  But I think the following was the magic combination that finally worked.  I don't know if this would help anyone else but it worked for me...
    I uninstalled all the previously installed CS3 components.  In fact, I uninstalled everything that started with the word "Adobe" on my computer, even Flash Player, just for good measure.
    Then I ran the Adobe cleanup script at level 2
    I downloaded the script from here...
    http://www.adobe.com/support/contact/cs3clean.html
    I went into the "computer" window and set it up to show hidden folders.  Click Organize->Folder and Search Options->View. Then click "Show Hidden Files and Folders"
    Then I went into C:\ProgramFiles\CommonFiles\Adobe and moved all the files in there to a folder on my desktop so there was nothing left in the Adobe folder (I don't think it wouldn't let me move some of the Acrobat files so the tech support guy said to just leave them)
    I did the same thing for C:\ProgramFiles\Adobe and moved all those files to a folder on my desktop
    Then I deleted all the files from C:\Users\MyUserName\AppData\Roadming\Adobe
    I think I ran the cleanup script one more time just for the heck of it.
    Next I went to the start menu and on the "Start Search" line I typed "msconfig."  When the system configuration window came up, I went to the "services" tab and checked "Hide All Microsoft Services"  Then I checked "Disable All"  So that disabled everything that wasn't a MicroSoft service.  Then I went to the "Startup" tab and checked "Disable All" and restarted the computer.
    Then I went ahead and installed everything fresh off the CS3 DVD and it worked the first time.  No more 1310 errors with the Config.Msi directory.
    Hope this helps someone else.
    Good luck!
    Jenn

  • New Deployment: SE: Installing Lync Components Error Installing OcsMcu.ms

    New SE Lab Deployment: 1 Windows 2008 DC, 1 x 2008 R2 Lync Server.
    I get the following error when going through the Installing Lync Components Process:
    Error returned while installing OcsMcu.msi(ASMCU), code 1603. Please consult log at C:\Users\Nav\AppData\Local\Temp\Add-OcsMcu.msi-ASMCU-[2012_11_20][20_13_58].log
    The events show the following:  
    Product: Microsoft Lync Server 2010, Conferencing Server -- Error 27761. Error 0x80070002 (The system cannot find the file specified) granting access to 'RTC Component Local Group' on MACHINE\SYSTEM\CurrentControlSet\Services\MediaPerf\Performance\Parameters
    performance counters.
    How do I get past this error?

    I have tried to run this package manually from the disk.
    It starts the installation then during the early stages of the install i get the error message asking me to insert the disk.
    When I try and install seperate components i get the following error message:
    Product: Microsoft Lync Server 2010, Conferencing Server -- Error 27761. Error 0x80070002 (The system cannot find the file specified) granting access to 'RTC Component Local Group' on MACHINE\SYSTEM\CurrentControlSet\Services\MediaPerf\Performance\Parameters
    performance counters.

  • Photo shop cc ( failed to install) optional components failed (6)

    Just purchased adobe creative and downloaded Photo shop CC. The program ran but the error( Photo shop cc ( failed to install) optional components failed (6) appeared at the end of install. I have Windows 8.1 and am running Norton 360. Can anyone help?

    Hi myimagefactory,
    Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate and interpret your installation log files.
    You may also try the following steps:
    > Enable the hidden Admin Account on Windows 7 ( Ref :  http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
    > Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
    > Disable norton 360 Antivirus software temporarily from the computer.
    Reboot and try installing in the new enabled Admin user account and check.
    Regards,
    Rave

  • Cannot install Selenium Components for Cross Browser Testing extension from Visual Studio 2013

    Hello,
    I am having some issues with installing Selenium Components for Cross Browser testing.  I keep getting this error everytime. Yes, Visual Studio 2013 has been registered with a product key. However, I cannot seem to bypass this error. I tried to install
    from http://visualstudiogallery.msdn.microsoft.com/11cfc881-f8c9-4f96-b303-a2780156628d and from Tools->Extensions and Updates from Visual Studio 2013. It just does not work. I have a copy of Visual Studio 2013.  Yes, I already have Visual Studio
    2012 Ultimate and Visual Studio 2013 Ultimate installed on my machine. What am I missing?

    Hi Antwan,
    Please uninstall the VS, then reinstall it.
    On the other hand, this issue is in the extension, I suggest that you should post it in
    Selenium components for Coded UI Cross Browser Testing site for efficient response. (Q AND A)
    Thanks
    Best Regards
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • ThinInstaller doesn't install all components

    Hi there
    I have a problem using ThinInstaller in combination with SCCM. I downloaded a few components using UpdateRetriever for the ThinkPad T450. During a SCCM Task Sequence a install those components using the following command:
    "%ProgramFiles(x86)%\ThinInstaller\ThinInstaller.exe" /CM -search A -action INSTALL -repository "\\UNC\PATH$" -noicon -includerebootpackages 1,3,4 -noreboot -log "C:\Temp\ThinInstaller.log"
    This works without any problems, but the WiFi and the Intel Management Engine Interface Drivers don't get install. Those two components have the same state than all other drivers in Update Retriever.
    If i manually install those two Installer from my UpdateRetriever Share it works without any problems. Does anyone know why this occurs?
    Thanks!

    Intel has changed the design of their Intel MEI driver package so that it apparently will not install in a scripted manner running under Local System.  I bet if you check the log file from ThinInstaller you will see that it got a 1603 return code when it ran the Intel MEI installer.  I've seen others run the SetupME.exe from that package with a -extract command line parameter and get the MSI files.  If you are not using the AMT features in your environment, you can get the two driver-only MSI files for SOL and MEI and add those in SCCM as an MSI package and that seems to install fine.
    For WiFi, I believe a new driver was recently made available.  You may want to search again in UR and make sure you have the right package.  Also, if it is the Intel 7265 you need to install, the Intel Wireless 7265/3160 has a co-requisite dependency on the Intel 7265 Bluetooth Driver (j5b206ww_764).  You need to also have this package in your repository. Other than that we would have to go through the TI log file to see why it did not install.

  • Just installed today Acrobat XI standard on PC w Windows 7, did use the Typical installation but now would like to install all components. What shall I do ? T y

    Just installed today Acrobat XI standard on PC w Windows 7, did use the Typical installation but now would like to install all components. What shall I do ? T y

    restart installation and pick whatever options you want to install.

  • ColdFusion 10 - install admin components

    Hi,
    I was just wondering if there were instructions around on how to install admin components for remote start & stop after installation of CF 10 has been completed?
    I'm looking to update some development servers for use with ColdFusion Builder, but I can't find any information on how to install the component on linux after the fact.
    I've searched through the installation guide, but haven't come up with anything.
    Cheers,
    Simon

    Hi,
    CF 10 is not supported on CentOS.
    Please refer the Support Matrix:
    http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/products/coldfusion/pdfs/cf1 0/coldfusion10-support-matrix.pdf
    Having said that, this can also be related to permissions that specific user is granted, with which CF 10 is being install. Make sure you have root privilidges and the install directory too has complete authority for the install to take place.
    But we will still advice you to be on a supported environment for CF 10.
    HTH.
    Rg,
    Spsb

  • Clients Agent no longer installing all components properly

    I attempted an upgrade to R2, but it failed, so I reverted back to a VM snapshot before the upgrade attempt and all is well except for installing the client during OSD.
    The imaging process works fine, but once complete the agent isn't listing all the Components as installed or enabled:
    1) CCM Notification Agent: Disabled
    2) Most of the components that should have a status of Enabled are listed as Installed.
    On top of that I'm running SP1 CU2 (5.00.7804.1300), but the newly imaged devices list all components as SP1 base (5.00.7804.1000).
    I checked the LocationServices.log file on a client and after a few failed attempts to reach my MP it eventually finds the MP and connects using HTTPS (we use a PKI cert).
    I reinstalled the MP by deleting the role, waiting, rebooting, adding it back.
    What else can I do?  I'm thinking I'll try installing CU5.
    So in short the client no longer completely installs, which prevents any WSUS updates or Software from being installed post OSD.

    I only see errors under 3 components:
    SMS_NETWORK_DISCOVERY:
    Network Discovery failed to connect to a DHCP server due to a connection error. (Network Discovery can communicate only with Microsoft DHCP servers; if you do not use these servers, you can ignore this error.)
    Solution: If you are using Microsoft DHCP servers, then refer to the specific error string for details. This error message means that fewer clients and networks will be found than otherwise. Note that this message will not be generated again during this Network Discovery session, regardless of how often the error occurs.
    SMS_MP_CONTROL_MANAGER:
    Management Point encountered an error when connecting to the database CM_SITECODE on SQL Server sccmDatabase.domain.local. The OLEDB error code was 0x80004005.
    Possible cause: The computer running SQL Server is turned off, not connected to the network, or not functioning properly.
    Solution: Verify that the SQL Server is turned on, connected to the network, and functioning properly.
    Possible cause: Management point does not have sufficient access rights to the database.
    Solution: Verify that management point computer account or the Management Point Database Connection Account is a member of Management Point Role (msdbrole_MP) in the SQL Server database.
    Possible cause: Network problems are preventing the management point from properly accessing the SQL Server.
    Solution: Investigate and correct any problems with your network.
    Possible cause: The management point having problems is at a secondary site, and SQL access account being used was recently reset by the parent site.
    Solution: This can automatically repair itself after one hour , as long as the account in use is not locked out. Check that the account in use is not locked out. Instead of waiting an hour, you can stop and start the SMS_SITE_COMPONENT_MANAGER service to immediately apply the new configuration.
    Possible cause: The SQL Server Service Principal Names (SPNs) are not registered correctly in Active Directory
    Solution: Ensure SQL Server SPNs are correctly registered. Review Q829868.
    Then when I attempt the SCCM upgrade I see a lot of USMT and Boot Images fail to upgrade:
    Error connecting to WMI while getting remote system drive. Configuration Manager Setup 1/7/2015 4:05:27 PM 5072 (0x13D0)
    WARN: Failed to create USMT package instance - ConnectServer failed. Will retry in 10 seconds Configuration Manager Setup 1/7/2015 4:05:27 PM 5072 (0x13D0)
    ERROR: Failed to create USMT package instance - ConnectServer failed. Configuration Manager Setup 1/7/2015 4:07:57 PM 5072 (0x13D0)
    Error connecting to WMI while getting remote system drive. Configuration Manager Setup 1/7/2015 4:08:58 PM 5072 (0x13D0)
    ERROR: Failed to create SMS_BootPackageImage instances - ConnectWmiNamespace failed. Will retry in 10 seconds Configuration Manager Setup 1/7/2015 4:08:58 PM 5072 (0x13D0)
    ERROR: Failed to create SMS_BootPackageImage instances - ConnectServer failed Configuration Manager Setup 1/7/2015 4:11:28 PM 5072 (0x13D0)

  • How to install BC Components in BI 7.0

    HI Experts,
    Here I am posting my query clearly. In RSA1-----> Business Content
    In the menu bar EDIT--->Set BC Components. Here I don't have any BC components available. The whole table is completely blank. How can I get those BC Components installed and how to get thm in active state.
    Points will be rewarded for helpfull answers
    Regards,
    Ravi

    HI Srinivas,
                        Can you pls guide me how to upload tht BI content to get all those BC components. Or give me your gmail id so that you can guide me further in solving issue.
    Points will be rewarded if my problem is solved.
    Regards,
    Ravi
    Message was edited by:
            Ravi Shankar

  • Errors Installing Portal Components using 9iAS Enterprise on 8.1.7 SE

    We are getting an error installing the Portal Components using
    9iAS Enterprise on a 8.1.7 SE database. The log indicates that
    the error is:
    ORA-00439: feature not enabled: Function-based indexes
    Errors encountered in the Install process. Installation Aborted.
    While I know that Function-based indexes are not supported in SE
    this should not prevent the installation of Portal.
    Does anyone have any suggestions?
    Thx, Paul

    Its also working in our case where we have used 8.1.7 Enterprise Edition. We installed 9iAS 1.0.2.0 on NT. So if you have any issues regarding this then let me know.

  • Crystal Report XI R2 merge modules install Enterprise components... Why?

    I am in charge of creating the runtime component insallation (we are using the RDC) and have used the merge modules for Crystal Reports XI R2 to create a msi package for installation. I used the Microsoft Visual Studio Installer for the creation of the msi. The installer seems to be adding some Business Objects Enterprise 11.5 components which is causing some of our users Enterprise 10 to stop working... It also seems that if they unregister the EnterpriseFramework.dll and register the same file associated with Enterprise 10, they are able to run with some minor issues (like colors not there, etc.).
    The question I have; Is there a particular reason these Business Objects Enterprise 11.5 components NEED to be installed? If not, is there a way to keep them from being included in my installation package?
    Any help is appreciated, I have been searching for similar issues on this for a couple days now and have found absolutely nothing of any help.

    Maybe we need to back up a little bit. When you say:
    Enterprise 10 to stop working...
    What does that mean? What actually happens? Errors, behavior, etc?
    Next:
    At this point what would my options be for this issue (remove files from merge module)?
    - I am not sure that removing the EnterpriseFramework.dll would be the way to go. Presumably the dll is htere because it is needed by the RDC(?). BTW., this is the only DLL with Enterprise in it that I see in the msm files.
    Would this be a bug related to the merge modules, or are these files supposed to be included?
    - Not sure, but the dll is installed into this directory: c:\program files\business objects\businessobjects enterprise 11.5\win32_x86. And it is a COM dll, so CE 10 should not even know that this dll is there. One good way to check is to use regsvr32 /u and unregister the EnterpriseFramework.dll. See if the CE 10 install starts to work now. You may want to re-register the EnterpriseFramework.dll of version 10.
    Ludek

  • Error when installing Lync components (Install CS-Database and Enable-CS Computer Fail)

    Receiving the following error when running the Lync components install wizard.  I believe the issue is related to having run the service and installed the database once before, but had an issue installing all of the Lync FE components due to a server
    FQDN renaming issue. Server was then named properly, removing the appended suffix, re-ran and redeployed the topology, all great. Now, when running the Lync component install wizard again, we receive the following errors related to installation of the databases
    and local stores. I noticed another article related to this problem and per the article, I uninstalled SQL Server, rebooted, re-installed SQL Server from scratch, rebooted, then went back to the Lync FE to run the Lync component wizard again, resulting in
    these errors:
    An error occurred while applying SQL script for the feature RtcDatabaseStore. For details, see the log file 'C:\Users\ADMINISTRATOR.ECSMARTSUITE\AppData\Local\Temp\2\Create-RtcDatabaseStore-ECSS-LYNCFE_rtclocal-[2014_07_25][16_56_00].log'An error occurred
    while applying SQL script for the feature LyssStore. For details, see the log file 'C:\Users\ADMINISTRATOR.ECSMARTSUITE\AppData\Local\Temp\2\Create-LyssStore-ECSS-LYNCFE_lynclocal-[2014_07_25][16_56_20].log'An error occurred while applying SQL script for the
    feature LyssStore. For details, see the log file 'C:\Users\ADMINISTRATOR.ECSMARTSUITE\AppData\Local\Temp\2\Create-LyssStore-ECSS-LYNCFE_lynclocal-[2014_07_25][16_56_20].log'
    Looking at each of the three logs, received the following errors (in order of each log file listed above):
    1.  Creating login ECSS-LYNCFE\RTC Component Local Group.  The server principal 'ECSS-LYNCFE\RTC Component Local Group' already exists.
    2.  Directory lookup for the file "\\ECSS-LYNCFE\D$\CsData\LyssStore\lynclocal\DbPath\lyss.mdf" failed with the operating system error 5(Access is denied.)

    It really looks like permissions - just for the heck of it, use a domain admin account to do this.  Make sure you're in the local admin group on the server.  
    Check out the following link:
    http://social.technet.microsoft.com/Forums/lync/en-US/9c4615cd-3fd8-46c3-a962-543e0528c26d/edge-server-installcsdatabase-fails-with-the-server-principal-servernamertc-component-local?forum=lyncdeploy
    Here is a quote:
    Install SQl management Studio and check if a SQL instance already exists. If so check the DBs and you'll see that the login already exist. Uninstall SQL and leave just Lync core components. Restart and reinstall afterwards. You have this problem probably because you cahnged the name of the machine after runing Lync setup. Hence thesql instance refuse the login.
    We just solved this problem this way
    if my post is helpful - please click on the green arrow. (please excuse, in advance, any perceived sarcasm/humor - as I often forget it does not translate through text) :)

Maybe you are looking for