Install Question on Pro 8 Regarding Samples

I'm in the middle as I type this of installing Logic 8. I notice it is "installing EXS Sample" where it is installing everything else...on my startup drive. When this is all finished, I'd like to take all the samples and move them over to another drive...will that be OK and how do I tell Logic where I moved them?
Thanks
Tom

Jon - why would you do that? The audio (samples) are the ones that need to be moved.
Ocean - keep the sampler instruments (anything ending in .exs) where it was (application support), then put the actual samples (wav, aif etc files) on the second drive.
That should work. Also in EXS preferences make sure it is checking 'all drives' for samples.

Similar Messages

We have 'CS6' version of Adobe. We are facing a problem with 'Acrobat Pro'. Every month that is stop working and everytime need to install. Kindly help us regarding solving this problem...

We have 'CS6' version of Adobe. We are facing a problem with 'Acrobat Pro'. Every month that is stop working and everytime need to install. Kindly help us regarding solving this problem...

Your Acrobat is running in Trial Mode. Try this KB: Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
If it doesn't work you need to contact Adobe Support for assistance.

Installing Quick Time Pro on Windows 7

I have purchased QT Pro and received instructions by email to download. When I click on the link ' http://www.apple.com/quicktime/pro/keyinstall.html ' I find myself on 'Apple Support QuickTime' with no means of starting the registration or download. Help!!

Lovelee wrote:
I installed Quick Time Pro and then had to de-install and then re-install Quick Time, now I am getting a message the registration code is an invalid code. Is there a way the get the recent install to recognize my code?
Make sure you're entering in both the user name and key code exactly as in the email Apple sent you. Any error in either, including leaving off a salutation (for instance, if the email says "Mr. John Smith") will cause the registration to error.
If you continue to have problems, or for future questions, I'd suggest you start a new topic with your issue (use the "Post a new topic" link at the top of each main topic page). It's generally better to ask a question as a new topic rather than as a reply in someone else's thread. It's more courteous to the original poster, and is more likely to get your question the attention it deserves.
Regards.

HT3820 Installing Quick Time Pro on two iMac computers

I just purchased Quick Time Pro. May I install it on both of my iMac computers?

Lovelee wrote:
I installed Quick Time Pro and then had to de-install and then re-install Quick Time, now I am getting a message the registration code is an invalid code. Is there a way the get the recent install to recognize my code?
Make sure you're entering in both the user name and key code exactly as in the email Apple sent you. Any error in either, including leaving off a salutation (for instance, if the email says "Mr. John Smith") will cause the registration to error.
If you continue to have problems, or for future questions, I'd suggest you start a new topic with your issue (use the "Post a new topic" link at the top of each main topic page). It's generally better to ask a question as a new topic rather than as a reply in someone else's thread. It's more courteous to the original poster, and is more likely to get your question the attention it deserves.
Regards.

Installing Adobe Acrobat Pro 9 on a new laptop, but it doesn't accept my serial number

Hello,
On my old laptop I had installed and licensed Adobe Acrobat Pro 9. I retired my old laptop and bought a new one. I want to install Adobe Acrobat Pro 9 now on the new one. But seemingly my serial number is not accepted any more. That's what I did so far
1. Downloaded Adobe Acrobat Pro 9 from http://helpx.adobe.com/acrobat/kb/acrobat-8-9-product-downloads.html
2. Retrieved my serial number from Adobe ID (it matched what I have found out locally on my old computer)
2. Started the installation
3. Entered my serial number when asked for. Then I get a message "Invalid Serial Number"
Who can help please?
Best regards,
Dr. Rolf Schlagenhaft (Freescale Semiconductor)

Moving this discussion to the Acrobat installation & Update Issues forum.
RolfSchlagenhaft there are no registered Adobe software titles under the account you are posting to the Adobe forums with. You will want to attempt to locate the account which has your registered serial number. You can find more details at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html. If you need assistance locating the account which contains your serial number then please contact our support team at Contact Customer Care.
Finally if you have a volume license for Acrobat 9 Professional then the installation files are only available at https://licensing.adobe.com/. The installation files you downloaded are for the retail version of Acrobat 9 Professional. This may be another cause of you receiving the message that your serial number is invalid.

Some issues after clean installing windows 7 pro 64bit

Hi,
I have a couple of issues, I clean installed windows 7 pro, 64bit, (vanilla) restored my license with ABR and used system update to download all the drivers. (no issues until here) But after restarting the system, I found this issues:
1. I have to put the bios in legacy mode for system to boot. Otherwise it gives me a "no operating system found" message. Is there any way to make a proper installation for the system to boot in UEFI and LEGACY?
2. System update didn't install thinkvantage center. (the program that stays in the taskbar). Should this be installed manually? Or system update should have installed it?
3*. I can not use lenovo driver page of my x120e. In IE it shows me repeatedly the wizard to choose my model, although I enter the correct info there. It starts all over again and again. Tried opera, I can see the drivers page, but I can't browse, or expand none of the sections. (all I can think of this, do I need java for the page to work?)
3*. UPDATE: After installing IE 9, java and flash player, still not working. Opera too. Google Chrome works fine. What's the matter with IE and OPERA? What component do I need to make IE work with lenovo drivers download page?
Can anyone help me? Never had to deal with these issues.
Thanks in advance
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.

Hello,
Have you tried wiping the hard disk drive and reinstalling Windows 7 Professional x64 from the factory recovery discs while the BIOS is set to UEFI? If so, did that work?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Installing Acrobat 9 Pro on a virtual machine on my Mac using Parallels. Not an upgrade but being asked what I upgraded from.

I'm installing Acrobat 9 Pro for Windows on a virtual machine on my Mac (running Parallels). I successfully installed the same program using the same discs on the same Mac previously, but that virtual machine became corrupt and can no longer be launched. For this re-installation, the installation sequence is asking what version I upgraded from - but as this is not an upgrade, I get stuck at that step and am unable to complete the installation. What should my next step be?

Hi Akselowner,
This error usually comes up if the serial number you are using is an Upgrade serial number.
In such a case the installer will prompt to enter the previous qualifying version serial number.
Please send me a private message with the serial number and I will validate and confirm that for you.
If you do not have the previous qualifying version serial number then the current serial number needs to be unlocked.
Please contact our customer service so that they can do the needful for you. You can even reach our chat support at http://adobe.ly/yxj0t6
Regards,
Rave

Problem installing Win XP Pro SP2 on 2008 Mac Pro running 10.6.8

Okay, I have never setup or ran a bootcamp partition so I apologize in advance for my ignorance on the subject. I have been attempting to install win xp pro (SP2). I am using the Boot Camp Assistant v3.0.4. I have created a 32GB FAT32 partition and at the point I click Continue Installation (with the XP Pro disc in the drive) the computer reboots to supposedly install.
What happens instead is I get a revolving censorship/ban circle icon, folder with question mark and apple logo. It just continuously will flash between those 3 icons until I restart.
Here's what I've tried...
-removing all other drives. I'm attempting to install on the boot drive which is in bay 1.
-removed all external devices only things plugged in are my usb keyboard and DVI monitor
-deleting and recreating the partition
-I have the xp pro cd in the top drive and the snow leopard cd in the bottom drive (both internal cd/dvd drives)
Computer:
Model Name:          Mac Pro
Model Identifier:          MacPro2,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          3 GHz
Number Of Processors:          2
Total Number Of Cores:          8
L2 Cache (per processor):          8 MB
Memory:          10 GB
Bus Speed:          1.33 GHz
Boot ROM Version:          MP21.007F.B06
SMC Version (system):          1.15f3
No matter what I try I am met with the same results. I have held down the option key and manually selected the windows xp cd. It seems to be booting but immediately turns off my DVI monitor which, well, makes it impossible for me to actually know what is happening. I do have a nvidia GeForce 8800 which only has two DVI ports off the back. I do have the adapter and an old VGA monitor I could pull out of the attic but would rather not unless that is my only option. Can someone in the community please point me in the right direction?
Many, many, many thanks!
Curtis
OKC, OK

Update: my problem was solved by getting my VGA monitor out of the attic. Once windows was done and I ran the setup.exe off the Snow Leopard CD, all of the drivers were updated to allow me to switch back over to my apple cinema display.
Also, I did need to hold down the option key to select the windows CD to install...and again to select the windows partition to boot but so far everything is going well with Bootcamp 3.0.4 and XP SP2...other than it is windows.
-Curtis

Unable to install Acrobat XI Pro via CC

Whenever I try to install Acrobat 11 Pro it ends after 51% saying "the older version of Acrobat 11 Pro can not be removed". Well, there is no older version, I didn't install this software before, although I had Acrobat X previously on the machine which I deinstalled before. Are there any leftovers of the former installation? If so, how can I get my PC clean so XI will install? And: yes, I already tried the installation via "as administrator" with the same negativ result.
Besides that, dear developers at Adobe, the error message "7" is anything but helpful ("42" would have been more acceptable )
Error-Codes
Exit Code: 7
Install MSI payload failed with error: 1603
Third party payload installer AcroPro.msi failed with exit code: 1603
System: Win 7 Ultimate, 64 bit
Regards
Heiko
P. S.: I found the installation program itself (acropro.msi) and started it. This is the error it produces:

Hi Ja-Was-Weiss-Ich,
Please use the Acrobat Cleaner tool ( http://labs.adobe.com/downloads/acrobatcleaner.html ) to remove any / all remnants of Acrobat from your machine.
For Exit Code 7, you might want to refer the following KB Docs :
http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.
Please see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5 -cs5.html for information on how to review your installation logs

I want to install WIN XP PRO on Satellite U300-111

Dear all
anyone have any idea how i get Serial ATA RAID controller driver for toshiba Satellite U300-111 to install windows xp pro becouse it show me messege when i press enter for installation it said:
Windows XP Professional Setup
Setup did not find any hard disk drive installed in your computer.
Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic ro setup program.
setup cannot continue. To quit Setup press F3
PLS HELP ME ON THIS

Hi
Please ensure that the Intel Matrix Storage Manger was included into the Win XP setup.
During the installation of XP, setup will ask you to include the 3rd partly sata drivers.
Then you should press the F6 button und could include the Intel Matrix Storage Manager from the external USB FDD drive.
I have found many postings regarding this issue.
Please check these threads:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=26040
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=25749
bye

When completing install win 8 pro on my macbook pro using boot camp, the win 8 can't be started to complete win configure like user account and others, please help

please, when I installed win 8 pro using boot camp vers. 5.0.2 it was completed but when win start the first time to be signed my user name and password the mid of screen appeare blue and the other black, then the whole things stoped.
knowing that the win instalation going smoothley without problem during progress
regards

Did you download and install the Bootcamp Windows Support software according to the Bootcamp Installation Guides? http://www.apple.com/support/bootcamp/
There is a Bootcamp Forum here. https://discussions.apple.com/community/windows_software/boot_camp
You should ask Bootcamp questions there. The moderators may move this thread to the Bootcamp Forum.

Unable to install windows 8 Pro (64bit) on R61, 7755jm1

I have an old thinkpad, the R61 series, model 7755JM1.
And I tried to install windows 8 pro (64bit) on it, hoping to have a taste of the new OS's touch features through remote control on my tablet.
However, the installation has never been successful.
I was able to finish the installation process. Yet whenever it starts to "setup my device", it was never able to finish, and it usually stopped at 65% or 84%.
then my thinkpad would restart on its own, and threw an error message telling me my computer is restarted unexpectedly and the installation is not succeful, also suggesting me try to install again.
This is very frustrating. I have checked on intel's website and other online sites that my CPU (core 2 dual process T8100) supports intel64, and execute disable bit (in my BIOS I think it is by name of "execution prevention"), and sse2, sse3.
In my BIOS, I enabled execution prevention, set SATA mode to "AHCI", and enabled "extended memory test". I format the partition every time I tried to install.
I have installed windows 7 pro on my thinkpad before, and it was just fine.
Do anybody have any idea what is going and how should I solve this?
Many thanks.
Lee.

Hello,
According to the Lenovo, the specs for your R61 (MT: 7755-JM1) as it shipped are as follows:
T8100(2.1GHz), 1GB RAM, 160GB 5400rpm HD, 14.1in 1400x900 , 128MB nVIDIA Quadro NVS 140M, CDRW/DVDRW, Intel 802.11agn wireless, Bluetooth, Modem, 1Gb Ether, UltraNav, Sec Chip, FPR, Camera, 4c Li-Ion, WinVista Home Basic 32.
As you pointed out, the T8100 is a 64-bit CPU, so there should be no problems with that. I did notice that the unit originally shipped with 1GB of RAM, though.
From looking at Microsoft's Windows 8 System Requirements page, I see that 2GB of RAM are required for the 64-bit edition of Microsoft Windows 8, so if your R61 only has the original 1GB of RAM in it, it will need to be upgraded..
The R61 officially supports 4GB of RAM in the form of two 1GB PC2-6400 800MHz DDR SO-DIMM modules, and apparently can unofficially be upgraded to 8GB using two 4GB modules with the same characteristics.
If you already have 2GB (or more) of RAM installed, the other suggestion off the top of my head is to make sure you have the latest version of the BIOS firmware installed:
Name: BIOS Update Bootable CD for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit), XP, 2000 - ThinkPad R61, R61i 14.1 inch widescreen with IEEE 1394, ThinkPad T61, T61p
URL: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS013943
Version: 2.30-1.08
Released: 02 Apr 2012
If the issue still occurs, please let us know and we can try and help you troubleshoot it further.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Is it possible to Install Windows 8 Pro 64-bit on a secondary hard dive in Mac Mini (Late 2012) using Boot Camp 5?

Hello,
I have a Mac Mini (Late 2012) running on OS X 10.8.3 and would like to install Windows 8 Pro on a secondary hard drive using Boot Camp 5. Is that really possible?
A little background about the topic under discussion.
1. Mac Mini (Late 2012) has a place holder to accomodate an additional hard drive (2.5") under the hood
2. If just plugged with one, it would show as an additional volume in the finder
3. Boot Camp 5 supoprts Windows 8 Pro 64-bit installation
The idea is to run two operating systems (1. OS X and 2. Windows 8) on two hard drives in a Mac Mini, with maintainability a constraint.
Have any one tried this out? If so, kindly share if there are any specific procedures apart form the one given in Boot Camp 5 manual.
Thanks in advance.
~ Narey

Gotcha!!
I am done with mounting a secondary HDD (thanks to ifixit) and installing Windows 8 Pro 64 bit on it without a worry. Charm, charm!!
Boot Camp 5 guide prescribes all needed steps and when read and used correctly, installation must be an easy task. And all the existing apple hardwares work so good in the Windows environment too.
I am going to help out a friend of mine in doing a similar thing on his mac too. If you got specific questions, please do shoot up here and i should be able to get a reply to it (if at all).
Thanks everyone.
~ Narey

Install Windows 8 Pro on Mac Air

I installed Windows 8 Pro, upgrading from Windows 7. Once this upgrade, just notice that the sound not working, Function (Fn) keyboard to adjust the screen, volume (F1-F12) not working, along with others Drivers Error at device Manager.
Herewith the Step for those who have the same problem at least to get the sound works, and some annoying drivers devices error.
Requirements
1. Run Your Mac OS, go to Bootcamp and download the Bootcamp.
2. Stored your files at External Harddrive, or USB Stick
3. Boot into your Windows 8
to Fix for the Sound
- Install Cirrus
- Drive: \WindowsSupport\Boot Camp\Drivers\Cirrus\
SM Bus Driver
- Open Your Device Manager
- Locate the drive to Drive:\WindowsSupport\Boot Camp\Drivers\NVidia\
- it fill find "it will update NVIDIA nForce PCI System Management"
Coprocessor Driver
- Open Your Device Manager
- Locate the drive to Drive:\WindowsSupport\Boot Camp\Drivers\NVidia\
- it will find "NVIDIA nForce System Management Contorller"
iSight
- Open D:\WindowsSupport\Boot Camp\Drivers\Apple
- Install AppleiSightInstaller
This should fixed all the driver issues and Sound and get the Windows 8 working nicely, except for
- one annoying error message "Bluetooth USB Host Controller" in the device manager. Not sure what the impact.
- Keyboard Fn Function.
thats all i can share. Hope this helps.
regards
INX

Apple has not announced support for Windows 8 yet.
Allan

Cannot install Windows 7 Pro; gets stuck on "Starting Windows" screen

I have read dozens of posts on this topic but none has helped yet.
My system has Windows 8 with UEFI. I want to install Windows 7 Pro on another partition. I have turned off Secure Boot in the UEFI/BIOS. When I try to install Windows 7 Pro from a DVD it shows "windows is loading files" and then gets stuck on "Starting Windows"
for ever. This happens even when no USB peripherals are attached.
I have already wasted many days on this. I hope someone can help.
Thanks!

Hi friends of the internet
I have been reading several forums regarding the issue of installing windows 7 (64 bit) to a computer that have had windows 8 installed previously or just a GPT formatted disk.
My Case:
Windows version installed: Windows 7 Professional N with Service Pack 1 (x64) or Windows 7 Professional (x64)
Computer used: Samsung laptop
Model Code: NP53U4C-A02SE
See the specks here:
http://www.samsung.com/dk/consumer/computer-peripherals/notebook/notebook/NP535U4C-A02SE-spec
Create a USB install disk that not freezes at ”starting windows” screen:
First I followed this great guide (Thanks Daniel):
http://
hodgin.ca/2012/10/02/creating-a-uefibios-windows-7-usb-and-installing-to-gpt-partitions/
STOP AFTER STEP 13!
1. Open a command line in administrator mode
2. run DISKPART
3. type LIST DISK
4. Look for the disk number that represents your USB drive
5. type SELECT DISK # where # represents the number of your USB drive. Get this right or you will wipe a different drive out.
6. type CLEAN
7. type CREATE PARTITION PRIMARY
8. type SELECT PARTITION 1
9. type ACTIVE
10. type FORMAT fs=fat32 quick
11. type assign
12. The drive should now be formatted and marked as active and fat32. Do not format the drive as NTFS or you will only be able to boot into the installer in BIOS mode.
13. Now you will need to copy the contents of the windows 7 install dvd to the USB with a regular copy paste from windows explorer.
Here comes a very weird hack... I do not know why it works, but I think it is all about flash drive data structure. I did these steps on a win 7 prof. computer.
(Let’s assume it’s drive E:)
Make a copy of your e:\efi\microsoft folder to e.g. your desktop.
Delete the e:\efi folder
Copy the \efi folder from a windows 8 installation disk (I used Windows 8 (x64) Professional) to the e:\efi folder. Sorry I cannot provide this for you.
Here comes the weird part. Then delete e:\efi\microsoft you just copied from the win 8 installation disk.
Copy the \microsoft folder form the desktop to e:\efi\microsoft
Resume the guide from step 18.:
http://
hodgin.ca/2012/10/02/creating-a-uefibios-windows-7-usb-and-installing-to-gpt-partitions/
18. Insert the USB in the machine and turn it on and boot into the UEFI/BIOS loader and check for boot options. On the ASUS Zenbook it detected two boot options on the USB drive. One was UEFI and one was regular BIOS. I made the
UEFI option the first choice and restarted the machine.
My bios setup was:
Secure Boot = Disable
OS Mode Selection = CSM and UEFI OS
Boot Device Priority = I made the UEFI option the first choice and restarted the machine.
The installation should start normal.
E.g. See this guide:
www.sevenforums.com/tutorials/186875-uefi-unified-extensible-firmware-interface-install-windows-7-a.html
What I did was:
Select custom installation (Advanced).
Click Drive options (Advanced).
Delete all partitions (this might not be needed). When I did not delete all partitions I was asked every time after the install, during start up by the windows boot manager to select ether win 8 or win 7.
Click new (DO NOT make Changes in the size of the disk), apply, see NOTE!
Edit the Primary partition as you want it e.g. divide it to more partitions.
Select the one you will install windows on and do a normal install.
I do not make changes in the Bios after install. The Boot priority is automatic set to “Windows boot manager”. If I change the boot mode back to OS Mode Selection = UEFI OS, the computer will freeze at the “starting windows” screen again.
All this worked for me, good luck. There might be more to it, but this is a start.
By the way, the start up time for a MBT install was 37 s. And for the GPT it was 49 s.
Remember if we stand on each other’s shoulders we will reach higher
J.
NOTE: Here the installation program should create three partitions automatically!
Partition 1 - System - The EFI System partition that contains the NTLDR, HAL, Boot.txt, and other files that are needed to boot the system, such as drivers.
Partition 2 - MSR - The Microsoft Reserved (MSR) partition that reserves space on each disk drive for subsequent use by operating system software.
Partition 3 - Primary - Where Windows is to be installed to.
If this isn’t the cast you are not installing in UEIF mode. To check for this (thanks again Daniel):
If you need to find out if you have booted into BIOS mode or UEFI mode when the installer starts you can press SHIFT+F10 when the welcome installer shows up to open a cmd prompt. from here you will likely be at X:\Sources. Type cd .. to
go back a dir and move into \Windows\Panther\
Then type notepad setupact.log
Within this file do a ctrl+f and search for
Callback_BootEnvironmentDetect: Detected boot environment:
It should either say BIOS or UEFI.
To check if your disk is in the GPT format.
Open the command prompt.
Type: DISKPART
Type: List Disk
See for the star (*) in the GPT column

Install Question on Pro 8 Regarding Samples

Similar Messages

Maybe you are looking for