Install the Bluetooth cause blue screen

hey, I purchase a Lugulake Bluetooth Speaker but cannot use it, When I installed Bluetooth driver cause my PC(win 7 system) blue screen.

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Can't really see how this is related the phone. Could you please elaborate a bit?
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

Skype video crashes my GPU driver and causes blue screen.

Hello,
Installed a new copy of windows and got the latest version of skype for my PC (on wich skype worked just fine, video calls, voice calls, but it was an older version. No hardware changes)
With the new skype, I , for the least, get driver crashes, and for the most, a blue screen, when I just go to options to set up my webcam.As soon as I see the square "loading" my webcam in the options, everything freezes and I get a driver crash or a blue screen.
Current specs:
i5 4440, stock clocks
2x8gb 1333 ddr3 1.5v ram, stock
R7 260x, stock
500w PSU, not the best quality, But I also tried a 1000w platinum PSU, and same resaults.
last error code I remeber from the blue screen was: 0x00000116
I know it is related to the GPU, but it doesn't have power deficiency, since I manage to run heavy games just fine.By the way, my webcam works just fine on different web sites, so it's not the webcam.
What I tried:
-Degrading to the oldest supported version by skype
-Degrading video drivers
-Using different webcams
-Installed all windows 7 64 bit updates
edit:
skype 6.14 works, but newer versions crash my GPU drivers and cause blue screen

I would suggest uninstalling Droidcam as it could be the source of some delays assisting in causing the problem. TDR problems occur when your videocard is unable to respond in 2 seconds for a variety of reasons (heat, tweaks), forcefully resetting the card. Some people increase this delay in their registry from 2 to up to 10 seconds to give the card time to catch up so that a reset doesn't occur. You can try this MS fix it which increases this delay. https://support.microsoft.com/en-us/kb/2665946

IPod touch causes "blue screen" crash on connection

So, following a defrag on my XP based pc, when I connect my iPod touch to the pc via USB, the PC immediately blue screens. (STOP 0x0000007E 0xc00000005 0x00000000 0xf78ed7c4 0xf78ed4c0).
I suspect it may be the iPod touch USB driver? Is that likely? If so, how do I remove the corrupt driver and reinstall?
Thanks

Thankfully, after a few changes and reviewing some of the other posts in this excellent forum, I have resolved the problem. It had nothing to do with the defrag at all. What I had omitted was that prior to the blue screen, I had installed the free Photoshop Mobile App from Adobe. By editing and saving a photo, a new directory was created in the photo albums. Then when I connected the iPod to my PC, for reasons best known to Aple (but see various other threads in this forum) the pc thought the iPod was a camera, and tried to load a USB camera driver. I assume this must have conflicted with an existing USB driver on my pc, causing it to "blue screen". By totally removing the app and the new album on my iPod, I was able to make my pc recognise the iPod as an iPod again. Shame, I thought the photoshop app was good, but I shall avoid it (and any other app that creates albums / photos) in future.
Is there any obvious way to alert Apple to these sort of problems with third party apps - or possibly with their OS on the iPod which should be able to stop errors like this?

BB Desktop Software causes Blue Screen at Windows XP

Hi,
I'm using BB Desktop Software 6.1.0.35 at Windows XP over Lenovo X201 laptop. When I try to sync the adressbook or calendar between my BB(Storm II 9520) and my laptop, it often causes blue screen at my laptop.
I tried to uninstall and reinstall the desktop software but the blue screen occures again. But, the same version of Desktop Software at Windows VISTA over HP pavillion Desktop doesn't cause similar problem.
Please kindly let me know how can I fix it or please check if there are any defects at your Desktop Software.
If you need, I can send the screenshot to you via email.
Best Regards,

Just unisntall this version and install the desktop version 5.1. That will not give you blue screen infact it is fully compatible with xp
Need any help please let me know

After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely

After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely." What do I do now? This is an iMac and I'm running 10.6.8.

Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it. See below for how to clone a drive.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
You may be able to backup your data if you have an erased external drive you can use. Before you do the above but after you have opened Disk Utility you can try to clone your drive:
Clone using Restore Option of Disk Utility
1. Open Disk Utility.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
       it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
      the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Now this will only work if the drive is accessible and can be cloned by Disk Utility. Otherwise, you would need to access your drive from another Mac that you can connect via Firewire - Target Disk Mode.

Firefox Causes "BLUE SCREEN CRASH"

Hello There.
To my utter dismay I am forced to use Chrome to access this forum. The reason is the moment I use Firefox (3) my computer crashes and I get the dreaded windows blue screen. I have been using ff for a long time now without problems. Yesterday I updated adobe flash player, but have now uninstalled flash player in the hope that the problem is resolved. No luck. I can use my computer in normal manner without problems, but the moment I use ff it crashes

I have this problem too, just installed Windows 7 Home Premium x64 two days ago. Yesterday I did a massive windows update and I believe the BSODs started after that. I've isolated it down to Firefox, partly because I had a similar problem with Vista x64 prior to the Win 7 upgrade and had removed Firefox from the machine completely w/o giving it too much thought.
Last night I found a way that 100% crashes windows within 5 mins, 5 times in a row, open firefox, open certain tabs and just wait. BSOD.
Note I also use Thunderbird but that doesn't seam to crash windows.
I found two separate threads on other forums suggesting this might have something to do with fonts. Not sure why Firefox is the only application suffering from it though. So from another thread following steps were suggested that are shown below, I haven't tried these. Another user on a different forum suggested running windows repair and through that somehow fixing the fonts. I'll report later if this issue helps solve the problem.
1. this may seem random, but might be worth a shot... i think this problem
often occurs because of registry errors with the fonts... this solution fixes
that. if you browse to windows/fonts and immediately get a blue screen, then
the fonts are your problem
2. first try going to control panel > fonts >font settings (on left) > restore
default fonts
3. if you can't access fonts in the control panel then try this... in explorer go
here: \\%COMPUTERNAME%\C$\Windows\Fonts (replacing %computername% with your computername).
4. then hit ctrl+a to select all the fonts.
5. once they're all selected right click and select "install".
6. when the dialogue box pops up saying that "[such and such] font is
already installed, would you like to reinstall it?" click the box for "do this for
all current items", and hit "yes"
7. reboot (just for grins), and you should be good to go

Adding queue into a DAQ loop might cause blue screen

Hi
I am trying to use VISA to fetch data from a USB port. The data is put into a queue which is decoded in another thread. The pic below shows how my vi looks like.
The problem is that after around 15mins of execution the windows got blue screen. The error message has to do with usbser.sys.
I was at first suspicious of the USB virtual COM port's driver. However after I eliminate the queue part of this vi the blue screen problem is gone. The modified vi is like this:
It seems that this queue is actually causing the pc blue screen problem.
I have tried it with several different pcs and got the same result. I am using windows OS. 64bit and 32 bit have the same problem.
The blue screen message is here:
Has anyone encountered the same problem or had some clue of this issue?
Thanks in advance!

I agree with Bjorn, the problem is still likely to be with your USB read implementation.
Consider the possibility that your system is not reading from the USB buffer sufficiently quickly. What value is in Bytes at Port? Is this value increasing rapidly (faster than you are reading?)
Removing the Enqueue function perhaps also indicates that the queue write is taking time and preventing the while loop from spinning fast enough which could occur if the queue has a maximum element count (maybe you define the named queue elsewhere with a count limit and are failing to remove the queued elements quickly enough to prevent it from filling up?). You have no timeout wired to the enqueue function which means it will wait as long as it takes, stopping the loop. You might be better with a short (10ms) timeout, followed by a check to make sure it doesn't timeout.
Also consider using shift registers on your while loop borders to ensure the VISA ref is maintained, the queue ref is maintained and the errors are maintained (although these aren't likely to be the source of your problem, it's always good practice to maintain your error data for handling).
Thoric (CLA, CLED, CTD and LabVIEW Champion)

Schannel errors - appears to be causing blue screens

Hi guys
Every once in a while (a few times a month) our RDS server (server 200r82 hyper-v VM) decides to blue screen and restart.
Each and every time it crashes, we notice hundreds and hundreds of schannel errors appearing just before the crash (event ID 36888)
Well, it did it again this afternoon, and over the last 12 hours we noticed 1008 instances of this error, with 60 odd messages appearing within 0.2 seconds of each other, and 2 minutes before the crash.
I also noticed that just before the crash, there were a handful of services which hung seconds before the logged unexpected shutdown event. These services are as follows.
- UmRDPService
- WPDBusEnum
- UxSMS
- Audio Endpoint Builder
After the crash, it doesnt log any Schannel errors. although, saying this now and just checking again, it looks like its logged 127 instances of the same schannel error, starting from after around 2 hours of bringing the server back online.
Do these Schannel errors cause blue screens/crashes? Or is it something else I should be looking at... I'm at a loss, as there's not a lot more in the way of logs that seem to be telling me what's going on..

Hi EsDood,
Would you please let me know complete message of Event ID
36888? For Event ID 36888, it generally occur if a user tries to access a web site using HTTP but specifies an SSL port in the URL. Please check the Schannel tracing log if find relevant clues.
How to enable Schannel event logging in IIS
Please also refer to following thread and check if can help you.
Schannel
error, Event ID 36888? - IS there a way to Identify what causes Schannel to log error?
In addition, I noticed that a BSOD issue occurred on the Windows Server 2008 R2. Troubleshoot this kind of
kernel crash issue, we need to analyze the crash dump file to narrow down the root cause of the issue. Did you get any dump files? If get, please refer to
KB315263 and check if can help you.
If this issues is a state of emergency for you. Please contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.

I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.

What specific KB?
Do you know it works?
I set my 2103 nMP with an older (black) Apple USB KB and it worked fine

Ralink Bluetooth Controller Drivers Causes Blue Screen Of Death

Good morning, I have a HP Envy 17-J010el notebook, born with Windows 8 and now I have updated it to Windows 8.1 Professional.
After the update, I noticed that the bluetooth controller drivers couldn't be installed:
Bluetooth Controller: PCI\VEN_1814&DEV_3298&SUBSYS_18EC103C&REV_00\4&2051f34d&0&01E0
HP Support Assistant and Windows Update are unable to find them. I downloaded them from HP Envy-17J010el drivers page (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-125314-1&cc=it&dlc=it&lc=it... and tried to install them but I got the blue screen of death and I had to format my pc. These drivers are only for Windows 8 and evidently don't work on 8.1.
I searched the web for a solution but I discovered the everybody are in my same position, and anybody can't find a way to solve the problem.
At the moment I don't know what to do, I need the bluetooth but I can't use it or simply activate it.
Are updated drivers going to be released for Windows 8.1 soon?
I apologize for my english.

Do you read English?!
No one tell you to format your pc!!
Just go to program and features - Uninstall Update.
Find KB2887595 Uninstall it, restart your pc.
after this install agein the Ralink Bluetooth drvier via hp recovery manager.

Cisco VPN Client causes blue screen crash on WindowsXP Pro (Satellite M30)

Hi there,
I've got a Satellite Pro M30 running Windows XP Professional.
After starting a vpn Tunnel via a Cisco VPN Client (Version 4.6 and 4.7) the system crashes with a blue screen.
I can see that the key exchange is successful, but immediatly after the vpn connection gets established Windows XP crashes with a blue screen.
Has anyone an idea, how to solve this problem?
Maybe by device driver update? And if so, which driver should be updated?
Kind regards,
Thorsten

Hi R2D2 (and anyone else)!
1st of all (concerning your link) - I'm not using the wireless adapter.
I am connectet via 100Mbit via network-cable to my hub (all RJ45 TP Cat.5)
I found several other Notebook users by google'ing who have the same problem different vpn-clients but most of them with a centrino processor inside the notebook.
Almost all of them solved the problem by installing new drivers. But I can't use driver-patches from other Notebook to fix my Toshiba Drivers.
What could help is information about which driver is responsible for the crash by vpn clients on centrino notebooks. Maybe there is an Intel driver for it, but when I do not know which one causes the problem it's like seeking a needle in a haystack... :(
Disabling ALL other network devices (wireless, 1394-network adapter, modem, etc.) did not solve the problem.
I used the Cisco VPN clients several times on my old Compaq Notebook without any problems, but here it just doesn't work.
An idea which driver should be updated is kindly welcome!
Thank you, Thorsten

Skype causing Blue Screen on Windows 7

I just recently acquired a new computer and after installing Skype the second I log in it causes a blue screen of my computer. I tried a few times and the same happened everytime. Anyone else sharing this problem?

Blue screen on Windows 7? Wow. I've never managed to get BSOD on any of my Win7 PCs.
But what may cause this - no idea, really.
Добавляйте баллы, если моё сообщение вам помогло. Спасибо!
Возврат денег | Система обновления подписок | Заблокировали/взломали аккаунт? | Пропали контакты? | Не зайти в Skype/не добавляются контакты? | Не удалось загрузить базу данных?
Подписки | Цены

Adobe Bridge CS4 causes Blue Screen of Death! Help?

Can anyone help?
I keep getting a Blue Screen of Death every so often when I am using Adobe Bridge CS4 and another program, either Photoshop or Bryce or Cinema4D.
When I have been working in the other program for a while and attempt to return to Bridge, the instant I click on the bridge icon in the low taskbar, the PC blue screens and everything dies instantly with no time to read the blue screen or to take a photo of it, never mind do anything useful like save the file I was working on.
I have winXP Pro and an NVidia Ge Force 8800 GTS graphics card. (both are up to date)
I recently got the Adobe updates but there wasn't one for Bridge.
Buckets full of memory: 289GB free on the C drive and I store most (work) things on my F drive which is a terrabyte with 315 gigs free.
Um.... dunno what else to say.
Except: HELP!!!

Well, I don't find that the magnifying glass ability is all that much help to me as often what you see in that magnified area is too blurry to be of any use - my eyes aren't wonderful with small things (including small text - I therefore have the text on all the machines I use set to quite large, browser included) so I like large thumbnails too, and usually I find that the big thumbnails are sufficient for me to find what I want.
So that's not been the cause of my BSOD.
By the way what's "ralentize"? Is it like "pixilate"?
On the BSOD - it sounds to me that there can be more than one cause in Bridge of the BSOD, so it sounds as if Bridge CS4 - is just not stable, period.
The fact that Bridge in CS3 and CS2 worked just fine is a good indicator of this, (to me anyway) as most people seem to be saying so.
I wouldn't like to rely on NVidia's next update fixing this, as I've already updated NVidia once since this began and it didn't help, I now hear that there's now another update out for the NVidia Ge Force 8800 GTS (which is what I have in my PC), so I will be updating that when I get back, but as the last update didn't fix it, I doubt if this one will either, I think it's something that Adobe will have to sort out, but I doubt if they will.
So it looks like those of us with that graphics card are just left without being able to use Bridge properly - if at all.
I've given up on it on my PC and so I'm refusing to use it on my Laptop either, since it would be silly to get so used to it that I can't work without it.
I have tried using Irfanview, but it's functionalitly is comparably limited. So I'm looking out for something else.
I don't at the moment have PhotoshopCS4 on the laptop and as I left the box with the program in it in my room at Uni I can't install it on the laptop with its different Graphics card (although still an NVidia it's a Ge Force Go 6800, not the 8800 Gts), until I get back next week... not that I really want to, if it's just going to crash the laptop like it does the PC.
I do have Corel's Paintshop Pro Photo X2 on here, but I don't use it anything like as much as I do Photoshop, but at least the Bridge or Browser (they call it "Organiser") on that doesn't kill the entire computer, although it does take up room on the screen instead of opening as a whole new window.
Also PaintShopPro does not save an inferior version of the image when saving as BMP, which I've noticed does now happen with Photoshop CS4 (when comparing .psd or pspimage with bmp).
emirkill,
I will also try the "enable software rendering" when I get back, that you've used, in case that helps.

Itunes 8 - Connecting Ipod cause Blue Screen on Vista

I just installed itunes 8 over my itunes 7 on Vista.
Now whenever I plug in my ipod nano, I get a blue screen death. 3 times so far. even if it is plugged in on boot, I get a blue screen.
Before itunes 8 I never seen a blue screen with vista since it came out.

I think it's safe to say then that either Apple's USB driver shipped with iTunes 8 is broken on Vista, or it's causing a problem with some other common Vista driver.
Are you guys both using the 64-bit edition of Windows Vista?
Also remember to check with your manufacturers to see if there are updated drivers for other devices on your computers. This may help rectify the problem. For Dell (since one of you has an XPS), go to http://support.dell.com and enter the service tag of your laptop and update any hardware driver that's available for you.

Installing AIR application gives blue screen of death

I tried installing an Adobe AIR application called HelloWorld.air from a book entitled "Adobe Flex 3 Training from the Source", and I would get the Windows' blue screen of death. I've seen others post about this, so I know I am not alone. My operating system is Windows XP Professional SP 2 and above.
This issue is preventing me from even getting into Adobe AIR application development, and I was wondering when a fix for this will be made. I tried downloading the Adobe AIR runtime again, but it is still the same byte size as the previous one I downloaded, so I'm assuming it's still the same one (since it doesn't state any version number).
Is there anyone who has had this problem and was eventually able to work with Adobe AIR? Any response would be immensely appreciated.
Thanks.

I remember when I was getting BSODs the first time I tried installing an
.AIR application on my laptop, I got that "Send Error Report" window from
Microsoft, and I had clicked to send it. It came back with a report stating
that this was being caused by anti-virus software. This time around, I
turned off my anti-virus software (from CA, or Computer Associates) I
downloaded your application and tried to install it, and once again, I only
got as far as where I could select to save an icon to my desktop and/or to
launch the application after install, and when I clicked the "Install"
button, I got the BSOD right away.
I went the extra mile this time though. I installed Adobe AIR and your
application on another desktop that is totally clean with absolutely no
antivirus software whatsoever, not even a software firewall. I got the same
BSOD at the exact same spot.
I know Adobe knows about this because of a past thread I had not only read,
but responded to as well. It's just unfortunate it hasn't been fixed yet
because I'm really raring to start writing Adobe AIR apps.
By the way, Damon, your app looks nice, I just wish I had been able to
install it to see what it's all about. Lastly, thank you for responding to
my issue. I will report this as a bug on that link you gave me.
David

Install the Bluetooth cause blue screen

Similar Messages

Maybe you are looking for