Installation and Run Guide?

I don't understand how Sun can build software that is at the forefront like Java is and then not support it very well. Initially a few years ago I got servlets running with Apache and Jserv. Well, now I'm trying to get everything running with the latest and find this web site appalling. There is no instructions on how to get the servlet software running anywhere that I can find on the site. Plus there are links that go nowhere! There is not even documentation to tell you where to put the compiled java code or the html code. Instead I have to experiment with the example programs. WTF! Get some people to document this stuff and make it accurate. You're only hurting Sun's chances of success which as far as I can tell from the company stock, heading south.
I've download the JSDK1.4 and J2SDKEE edition which says that it has the servlet spec 2.4 code in it. Now what? Do I do something with classpath. Is there no longer a servlet.jar file because I don't see one in the directory?
GET SOME PEOPLE THAT KNOW HOW TO DOCUMENT THE SOFTWARE BEFORE YOU GO UNDER! It's tiring working with software as it is and then to fight installation problems.

You are upgrading from apache/jserv to what? Latest apache/tomcat setup?
If so you would have better luck at thier sites to get documentation:
http://jakarta.apache.org/tomcat (tomcat)
http://httpd.apache.org (apache)
seeing that sun does not support thier product. If you have code specific questions, Sun has got you covered.
http://java.sun.com/apis.html

Similar Messages

  • What is BDI or BDS spelled out? Jabber for Mac 9.2(1) Installation and Configuration Guide

    I’m spending the day catching up on Jabber/IM&P release notes across the server/clients.
    So I’m used to EDI and UDS, but we have a new acronym in the Jabber for Mac 9.2(1) Installation and Configuration Guide called BDI and BDS. However they don’t define what BDI stands for other than BDI is LDAP for non-windows
    Clients and suggests it should be used for Jabber for Mac.
    What is BDI or BDS spelled out? Something directory integration, but what is the B ?
    Then to add to the mix they reference BDS which sounds like the old UDS (is UDS changing to BDS?)
    How can Jabber get any more confusing…
    I also noted in the  Jabber Video for iPad 9.3.4 release notes that Apple is removing the Always Connect option in the near future. Manually launching Cisco AnyConnect Secure Mobility Client before making a call. This is going to upset some customers who like how Lync uses https and just works from anywhere with enhanced directory integration…

    Basic Directory Integration. It's not new, we had it in the Windows clients as far back as CUPC. The distinction got introduced when EDI was introduced, relying on Windows ADSI APIs instead of the client making a native LDAP bind.
    To my knowledge BDI/BDS are the same thing; I'm guessing S is 'service'. UDS remains unchanged.
    I also noted in the  Jabber Video for iPad 9.3.4 release notes that Apple is removing the Always Connect option in the near future.
    Well, they lost a patent infringement lawsuit and chose to change the functionality instead of pay the troll. That's not Jabber's fault. Collaboration Edge will be the way to avoid this in the near future.
    Please remember to rate helpful responses and identify helpful or correct answers.

  • SEEBURGER EDI &AS/2 adapter installation and configuration guides

    hi ,
    can any one provide me SEEBURGER EDI &AS/2 adapter installation and configuration guides or links please?
    thank you,
    babu

    Hi,
    You can get the original manuals from Seeburger if you are installing the Seeburger on server.
    Please see the below links
    /people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
    /people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
    /people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
    http://www.stylusstudio.com/edi/XML_to_X12.html
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
    Details on XI EDI adapter from seeburger
    Check this for Conversions-
    /people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
    SAP Adapters
    EDI with XI
    http://www.seeburger.com
    http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
    http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
    http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
    http://www.seeburger.com
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
    http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
    http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
    Regards
    Chilla

  • InDesign Server Installation and Configuration Guide

    Hi everybody
    I try to ask one silly Q.
    Where can I get this document.
    I found many references but no link :(

    There is no document titled "InDesign Server Installation and Configuration Guide". This was an error in the CS2 version of Introduction to InDesign Server.
    You'll find the CS2 version of Introduction to InDesign Server in the InDesign Server CS2 ESD (the server download bundle). Even better you'll find the CS3 version in the InDesign CS3 Server SDK. Available at the following URL:
    http://www.adobe.com/devnet/indesign/
    The information about Java/CORBA is specific to CS3, but the information about scripting and SOAP applies to CS2.
    Let me know if that helps, or you still need something else.
    Regards,
    Heath Lynn
    Developer Technologies
    Adobe Systems

  • Unable to install flash player. After downloading the Adobe FLash Player Installer and running it, a grey pop up window opens up but nothing is displayed in it. There is no progress bar or anything.

    Unable to install flash player. After downloading the Adobe FLash Player Installer and running it, a grey pop up window opens up but nothing is displayed in it. There is no progress bar or anything and even after keeping it running for a long time there is no progress. Please help with this issue.

    Hi Prat,
    We are aware of this issue and are working on a fix.  In the mean time, please use the offline installer, posted at the bottom of the help page corresponding with your OS and browser:
    Installation problems | Flash Player | Windows 
    Installation problems | Flash Player | Mac
    The installers are at the bottom of the page, in the 'Still having problems' section.
    Maria

  • Acrobat x pro crash after installation and running it, exit code 16,

    Acrobat x pro crash after installation exit code 16
    I installed Adobe acrobat X pro 10.0 trial and every time after installation and running the software it give me the following error message
    Please uninstall and re install the product, if the problem still occurs contact Adobe etc….
    Error code shutdown 16
    I’m using window 7 ultimate 32-bit service Pack 1.
    I uninstalled also the adobe reader but with no hope,
    If anyone can support me with this issue I will be grateful.

    Please check the solution provided under the below articles and check if that helps. Few users have resolved their issues by following it.
    http://forums.adobe.com/message/4648705
    Also, try running the below Microsoft fixit and check if that works.
    http://go.microsoft.com/?linkid=9708107
    If still same issue, follow "http://helpx.adobe.com/creative-suite/kb/error-1603-install-cs5-products.html"
    [Moved the discussion to Acrobat Installation & Update Issues Forum]

  • Want a XI installation and configuration guide

    Hi,
    Can anybody send me the XI installation and configuration guide which has all the installation steps and post configuration steps explained in detail.
    Please send it to me on [email protected]
    Thanks n Regards
    Chirag Gohil

    Check these links,
    Installation Guide
    http://help.sap.com/bp_bpmv130/Documentation/Installation/XI30InstallGuide.pdf
    Configuration Guide
    http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
    Regards
    Bhavesh

  • Create installer and running: MsiError 87: Unable to format error record.

    Ever since I have installed the Labview 2011 beta I am in trouble when creating installers that include the NI runtime.
    Whether it is Labview 2010 or 2011, when I have created the installer and run it, I -and everybody else- gets the warning:
    MsiError 87: <Unable to format error record.>
    And the installer qwill quit.
    When I exclude the runtime from the installer it works nicely. What can I do to fix it?

    Did any of you actually read the beta agreement?
    Issues with the beta are not be be discussed in public so don't keep posting here.
    The terms and conditions of the beta program are posted on the beta site and you agreed to them, so make sure to fully understand them. The only public information is that a beta exists. Everything else is confidential.
    Let me put it in a few simple words:
    "Welcome to Fight Club beta. The first rule of Fight Club beta is: you do not talk about Fight Club beta. The second rule of Fight Club beta is: you DO NOT talk about Fight Club beta!) 
    LabVIEW Champion . Do more with less code and in less time .

  • Netweaver Developer Studio Installation and Configuration Guide

    Dear Experts,
    I have downloaded the Developer Studio and Netweaver Composition Environment 7.1 trial version from SDN and have successfully installed the Server.  May I ask is there any Installation and Configuration Guide for the Developer Studio
    Your kind assistenance is appreciated.
    Thanks.

    Hi,
    This is the link for the installation and config guide :
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0e9cc7b-0469-2a10-d3a8-f4f04b30fb0b
    and here is the link to the master guide
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0c7613c-0d69-2a10-ed8b-bfef43f2a8c6
    hope it helps!!!!!!!
    Pls reward points if found useful
    Edited by: Mohd Tauseef Ibrahim on Apr 23, 2008 12:52 PM

  • Want XI installation and configuration guide

    Hi All,
    I am looking for step by step Installation and configuration guide.
    I want step by step procedure for the below things.
    1) Pre requisits before installation.
    2) Oracle installation
    3) Install central instance
    4) Install Database instance
    5) Database installation(Oracle)
    6) WEB AS JAVA 6.40 INSTALLATION
    7) PATCHING SAP WEB AS 6.40 TO SP16
    8) Testing Java install
    9) SAP EXCHANGE INFRASTRUCTURE 3.0 SR1 PREPARATION
    10) XI 3.0 SR1 – POST INSTALLATION
    Can anybody send a pdf or documents to [email protected]
    Thanks and regards,
    Chirag Gohil
    2)

    Hi
    Installation Guide
    http://help.sap.com/bp_bpmv130/Documentation/Installation/XI30InstallGuide.pdf
    Configuration Guide
    http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
    https://websmp101.sap-ag.de/~sapidb/011000358700009389172004E.PDF
    For Post Installation checkout the below thread
    Installation of PI 7.0
    PI(XI 7.0) configuration guides
    I guess these materials are enough to answer all ur querries.Any speacific issues ,feel free to revert back.
    Also reward with suiatble points

  • Acarbat Freezed after installation and run it for Mac Pro!

    Dear all,
    I tried to install Acrobat 9 Pro to one station this morning (or install
    Adobe Reader 9 couple days ago), but the system hanged after installation
    and ran it. Clicking "force quit", it showed that "Acrobat (no response)".
    Following are the general description about the workstation and it is
    connected to Mac server.
    Workstation which tried to install Acrobat 9 Pro:
    - Mac Pro Processor: 2* 3GHz Dual-core Intel Xeon
    - Memory: 4GHz
    - Mac OS X 10.5.6
    Server
    - Mac Pro Processor: Dual 2 GHz Power PC G5
    - Memory: 3GHz
    - Mac OS X Server 10.5.6
    - Service: AFP, FTP, Open Directory (control the use login for all
    workstations)
    Installation procedures:
    - Login the workstation as an Administrator (local)
    - Install Acrobat 9 PRO
    - Registration
    - Shut down the workstation after installation
    - Restart the workstation
    - Use my unique name to login (all my files are stored in Server)
    Problem:
    - Double-click "Acrobat 9 Pro" to run the software, it hangs
    or
    - Click one PDF file and use "Open with" to select "Acrobat 9 Pro", it
    hangs again.
    Does anyone have the same situation or have any idea to solve this
    problem?
    I really appreciate your kind help.
    Best,
    Ei-Wen

    Home>Library>Preferences>com.apple.SoftwareUpdate.plist.  Trash this file, repair permissions and restart your computer.  Empty the trash when done.
    P.S.  If you shut down your computer, the window should have disappeared.  Why didn't you use Force Quit?

  • Installation and run problem

    The previous user of my computer used jdk1.3. However, I got error message when I run the program(there is no compile error). The message is:
    Error occured during initialization of VM
    java/lang/NoClassDefFoundError: java/lang/Object
    Hence, I tried to install jdk1.3.1 and set the new path and classpath. Unfortunately, I cannot install it. I downloaded and installed jdk1.3.1 three times as well as jdk1.4 once. I always got error message:
    This self extracting executable file appears to have been corrupted and cannot be executed. You should obtain a new copy of this file to insure that it will execute correctly.
    I use Windows NT 4.0. I don't know this is the problem of my machine system or the problem of installation
    Please give me some suggestion!
    Any help is greatly appreciated!

    Well, I'd say a Windoze error, but you may try:
    1. Try to uninstall Java, if it's available with the add/remove programs, and then install the new copy.
    2. If it cannot work, try to locate the files of the previous install (c:\jdk1.3 is most likely, but depends on your collegue.) If you find them, remove all. Update your start menu so it won't contain anything java-related, and delete the JavaSoft subdir in your "Program files" directory. Use regedit to edit your registry. Use it with caution - you may destroy your windoze. Open HKEY_LOCAL_MACHINE, then SOFTWARE, and delete the JavaSoft key (right-click, delete). Go to the WinNT directory, and the System32 subdir. There, delete the files java*.* Now you can try again to install it. If you still unable to do so, well, try to unzip the file (winzip will open it) to a temp directory, and run setup there.
    If it still cannot work, try to find another WinNT wkstation, and install the package there. It probably will succeed, so you have the only option - reinstall WinNT and all the programs.
    Bad news is that I've seen this happen once, and only Windows reinstall helped. However, "inheriting" a PC from someone, well, I'd prefer to reinstall everything for sure. Ain't need no sticky files of my collegues... :-)

  • Installation and run

    I downloaded camera raw 6.2. Please tell me how to install and run?

    Hi Shinnan kiang,
    Can you follow the instructions on this page and let us know if you still need help?
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4807
    Thanks,
    Preran    

  • SiteMinder installation and setup guide

    I want to know the procedure and order to be followed for setting up and configure SiteMinder 6.0.

    Hi,
    I might have misunderstood your question but IF you are actually wondering:
    "Is there anything special I need to do after installing the Sun Directory Server to use it as my ldap DS?"
    Then my answer is:
    Nope! You just need to specify the port on which your Sun DS happens to be running on your machine during the SiteMinder installation...and voila it will store its config data on it!
    In case you want appropriate instructions on how to install Siteminder itself...shouldn't there be a docs folder with plenty of installation pdf's included in the Siteminder 6.0 cd that you bought?
    Cheers,
    - Pulkit

  • OCW installation and running root102.sh

    Hi,
    I'm trying to upgrade from ORACLE ClusterWare 10.2.0.1.0 to 10.2.0.4.0. We have two nodes and I've completed firsts steps and now i running root102.sh in each node. Can anyone help me, to solve this issue?
    In first node I have this message:
    [root@machine install]# ./root102.sh
    The clusterware daemons are running from /dev/raw/raw1: bound to major 8, minor 1
    /dev/raw/raw2: bound to major 8, minor 2
    /datos/ocw/product/10.2.0. But you are patching /datos/ocw/product/10.2.0
    [root@machine install]#
    [root@machine install]#
    [root@machine install]# /datos/ocw/product/10.2.0/bin/crsctl stop crs
    Stopping resources.
    Error while stopping resources. Possible cause: CRSD is down.
    Stopping CSSD.
    Unable to communicate with the CSS daemon.
    In second node I Have this message:
    [root@machine2 install]# ./root102.sh
    Creating pre-patch directory for saving pre-patch clusterware files
    Completed patching clusterware files to /datos/ocw/product/10.2.0
    Relinking some shared libraries.
    Relinking of patched files is complete.
    WARNING: directory '/datos/ocw/product' is not owned by root
    WARNING: directory '/datos/ocw' is not owned by root
    Preparing to recopy patched init and RC scripts.
    Recopying init and RC scripts.
    Startup will be queued to init within 30 seconds.
    Starting up the CRS daemons.
    Waiting for the patched CRS daemons to start.
    This may take a while on some systems.
    10204 patch successfully applied.
    clscfg: EXISTING configuration version 3 detected.
    clscfg: version 3 is 10G Release 2.
    Successfully accumulated necessary OCR keys.
    Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
    node <nodenumber>: <nodename> <private interconnect name> <hostname>
    node 2: machine2 machine2-priv machine2
    Creating OCR keys for user 'root', privgrp 'root'..
    Operation successful.
    clscfg -upgrade completed successfully
    [root@machine2 install]#
    Best regards.
    Javier Vargas
    Bogotá Colombia - South America

    Hi,
    Thanks for reply Vasu, finally what i've done has been modify this line in root102.sh to force ORA_CRS_HOME be equal to CLUSTERWARE_HOME and has worked.
    Thanks again,
    Best regards
    Javier Vargas
    Bogotá Colombia - South America
    CLUSTERWARE_HOME=`$ID/init.crs home`
    if [ "$ORA_CRS_HOME" = "$CLUSTERWARE_HOME" ];
    then
    $ECHO "The clusterware daemons are running from $CLUSTERWARE_HOME. But you are patching $ORA_CRS_HOME"
    exit 1
    fi

Maybe you are looking for