Installation of Wily Introscope for SMD on Windows
Hi!
I am about to set up the SMD functionality.
First of all I would like to install the Introscope Enterprise Server 7.1 on Windows (32 bit).
If try to start Introscope Enterprise Manager I get the following error:
EM Web Server did not start. Port already in use: 8081 To change the Web Server port, modify the EM property: introscope.enterprisemanager.webserver.port
If I change the port in file C:\usr\sap\ccms\wilyintroscope\config\IntroscopeEnterpriseManager.properties
I get the same error...
How to proceed in this case?
Thank you! regards
Thom
Hi,
I am also facing the same issue while starting Introscope Entraprise Manager. i.e " port already in use:8081 change the property introscope.entraprisemanger.webserver.port "
If I check the for Introscope service
bash-3.00# ps -ef | grep Intro
sm1adm 12666 12662 0 11:52:07 ? 0:00 /usr/dt/bin/dthelpview -helpVolume Intromgr
root 12817 10056 0 12:04:21 pts/1 0:00 grep Intro
And following is the output for port 8081
bash-3.00# netstat -a | grep 8081
*.8081 . 0 0 49152 0 LISTEN
Please tell me how to rectify the issue..
Thanks & Regards
Amair
Similar Messages
-
Wily Introscope for SOLMAN 7.1
Hi All,
We are configuring SAP Solution Manager 7.1
I have few doubts regarding Wily Introscope.
1. Is it necessary to install Wily Introscope on SAP SOLMAN 7.1?
2. Is it installed already with SOLMAN or need to be installed manually?
3. I need details about licensing policy of Wily Introscope.
4. If it is necessary to install please provide suitable link for installing it.
and I have one more question.
We getting waring message for Single Sign On and WEB Services Logical Port Creation in Managed System Configuration Step No. 8 Configure Automatically.
Shall we proceed with warning. or it needs to be fully performed without warning.
Please guide us.
Thanks & Regards,
IshanIshan trying to answer all your doubts:
1. Is it necessary to install Wily Introscope on SAP SOLMAN 7.1?
If you need to implement RCA then only Wily Introscope is required.
2. Is it installed already with SOLMAN or need to be installed manually?
It has to be installed manually..Just follow the standard guide..
3. I need details about licensing policy of Wily Introscope.
Good Question..I think there should be someone in your orgnisation who looks after the licencing..Ask him to give a call to SAP..
4. If it is necessary to install please provide suitable link for installing it.
Follow this link :
http://www.scribd.com/doc/36673011/Wily-Intro-Scope-8-Installation-Guide
Thanks & Regards,
Joydeep -
While installation, Apache listener configuration for 9ias at window screen
Hi,
I installed 8.1.7 enterprise edition oracle on windows 2000 and also removed IIS from windows .
While installing 9IAS Minimal edition , the problem i get is that
apache listener configuration for 9ias at windows screen doesnt splashes..
However , complete successfully message coming ...
But there is no Http Server or any 9ias product installed actually
What is wrong here ?
thanks in advance
Regards,
DefneHi,
I installed 8.1.7 enterprise edition oracle on windows 2000 and also removed IIS from windows .
While installing 9IAS Minimal edition , the problem i get is that
apache listener configuration for 9ias at windows screen doesnt splashes..
However , complete successfully message coming ...
But there is no Http Server or any 9ias product installed actually
What is wrong here ?
thanks in advance
Regards,
Defne -
Wily Introscope Version for Solution Manager 7 SPS 17
Hi
We have a solution manager 4 (now 7) running on an ABAP stack only, this was recently upgraded from Solution Manager 3.2 which was installed 3 years ago as ABAP stack only, this server was never powerful enough to have the Java stack added and the project did not require it.
I am now looking to migrate this ABAP Solution Manager 7 to a new server, using ABAP & JAVA so I can make use of Solution Managaer tools like Diagnostics, RCA, WILY etc.
On a sandpit copy I have migrated the ABAP instance to a more powerful server and added the Java Instance from the Solution Manager 4 Installation Master, so I now have a dual stack SM 4, I have patched this to SP17.
I am looking to install Wily Introscope for monitoring, I have read Note 797147 - Wily Introscope Installation for SAP Customers, where it says you should always use the latest version of Wily, which is 8.0.2, but looking at the note, the downloads for Introscope Enterprise Manager and Introscope Workstation are from SAP SOLUTION MANAGER 7.0 EHP 1, but I am not running Solution Manager on EHP1, I am on SP Stack 17.
Looking in the SWDC there are downloads in SAP SOLUTION MANAGER 7.0 -> Entry by Component -> Solution Manager JAVA Stack -> WILY INTROSCOPE ENTPR MGR 8
Is this what I should be using for my SP Stack 17, or should I use the EHP1 version?
Also, setting up the Solution Manager Diagnostics, is there a setup PDF for Solution Manager 7 SP17 ? I cannot find a setup guide for this release, most are for EHP1, I would rather not have to implement EHP1 as part of this migration !
Thanks for any help.
Paul.Hi Bhudev
Thanks for the reply, I presumed it was the Wily introscope 8 without the EHP1 I required.
As for installation guide, I have think you have misunderstood my question, I already have the wily installation guide from the note location, I wanted to know if there is any Solution Manager Diagnostics setup guides for SP17 ?
When I use transaction SOLMAN_WORKCENNTER --> System Monitoring --> Solution Manager Diagnostics --> Diagnostics System --> Diagnostics Setup --> Setup Wizard
the first 2 (of 23) setups are failing :
SSO The value of profile parameter login/accept_sso2_ticket could not be checked
BI Cannot invoke CCMSBISETUP on host localhost
Warning :
User(BI) Role SAP_BI_E2E does not exist
Then it says :
To complete the Diagnostics Setup, you should perform the following operations as documented in Diagnostics Setup Guide
I cannot find this Diagnostics Setup Guide for SP17 ?
The installation guides are mainly for EHP1, media library under sap-ag.de/diagnostics does not show this setup guide, Master Installation guide does not mention it, so was wondering if anyone could point me in the right direction for this guide ?
Thanks,
Paul. -
Wily Introscope Enterprise Manager fails to start due to Java Heap
Hello All,
I just installed Wily Introscope for the first time. I have successfully installed it from the log below:
Summary
Installation: Successfulwith errors.
396 Successes
0 Warnings
1 NonFatalErrors
0 FatalErrors
I also confirm that the Introscope Enterprise Manager is started as a service.
However, when i try to launch enterprise by following the path All Programs > CA Wily > Introscope 8.2.3.5 > Introscope Enterprise Manager....
I get the error below:
3/29/11 07:11:46 PM PDT [ERROR] [Manager.Bootstrap] Load all Management Modules FAILED.
3/29/11 07:11:46 PM PDT [ERROR] [Manager] The EM failed to start. Java heap space
I have also adapted my Java Heap from 512 to 1024 in EMService.conf file but I still get same error. This was the recommendation in this related forum post - Wily Introscope - EM failed to start
Please help!!!!Hello,
Like I said, I have increased the value to 1024MB and still not starting.
The corresponding section of the EMService is pasted below:
Wrapper Properties
Java Application
wrapper.java.command=jre
bin
java.exe
wrapper.working.dir=.\
Java Main class
wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperSimpleApp
Java Classpath (include wrapper.jar) Add class path elements as
needed starting from 1
wrapper.native_library=ServiceWrapper32
wrapper.java.classpath.1=./lib/ServiceWrapper32.jar
wrapper.java.classpath.2=./launcher.jar
#wrapper.java.classpath.3=
Java Library Path (location of Wrapper.DLL or libwrapper.so)
wrapper.java.library.path.1=./lib
Java Additional Parameters
Note: On 64-bit Windows only, the first additional parameter must be: -Xrs
#wrapper.java.additional.1=
wrapper.java.additional.1=-Xrs
wrapper.java.additional.2=-Djava.awt.headless=false
Initial Java Heap Size (in MB)
wrapper.java.initmemory=512
Maximum Java Heap Size (in MB)
wrapper.java.maxmemory=1024
Application parameters. Add parameters as needed starting from 1
wrapper.app.parameter.1=org.eclipse.core.launcher.Main
wrapper.app.parameter.2=-consolelog
wrapper.app.parameter.3=-noExit
wrapper.app.parameter.4=-product
wrapper.app.parameter.5=com.wily.introscope.em.product
wrapper.app.parameter.6=-install
wrapper.app.parameter.7=./product/enterprisemanager
wrapper.app.parameter.8=-configuration
wrapper.app.parameter.9=./product/enterprisemanager/configuration
Number of seconds to allow between the time that the Wrapper launches
the JVM process and the time that the JVM side of the Wrapper responds
that the application has started. 0 means never time out. Defaults to 30 seconds.
wrapper.startup.timeout=300
Please help -
SAPISMM*.SAR - SAP Management Modules Wily Introscope
Hi there,
I've installed Wily Introscope 8.1.0 on AIX 6.1 64 Bit. The installation was successful, there are no errors or warnings. Now I have to extract the file SAPISMM*.SAR in /usr/sap/ccms/wilyintroscope, but I can't find it in SAP-Marketplace. I'm a bit hopeless
Can you help me??
Best regards,
AndreasAre your installation of Wily Introscope at AIX 6.1 successful and the Wily runs?
We get a error on start:
Running Enterprise Manager with IHOME=.
Running Enterprise Manager with JAVAPATH=/usr/sap/ccms/wilyintroscope/jre
java version "1.5.0"
Java(TM) 2 Runtime Environment, Standard Edition (build pap64devifx-20071025 (SR6b))
IBM J9 VM (build 2.3, J2RE 1.5.0 IBM J9 2.3 AIX ppc64-64 j9vmap6423-20071007 (JIT enabled)
J9VM - 20071004_14218_BHdSMr
JIT - 20070820_1846ifx1_r8
GC - 200708_10)
JCL - 20071025
Unhandled exception
Type=Segmentation error vmState=0x00000000
J9Generic_Signal_Number=00000004 Signal_Number=0000000b Error_Value=00000000 Signal_Code=00000033
Handler1=09001000A26B3D58 Handler2=09001000A26ABE38
R0=0000000000000002 R1=0FFFFFFFFFFFE7E0 R2=0000000000000002 R3=0000000000000002
R4=0000000000000002 R5=07000000002652B0 R6=0000000111C944D3 R7=0000000111C944C8
R8=0000000111C944D0 R9=0000000111C943E0 R10=FFFFFFFFFFFFFFFF R11=09000000176FFEB0
R12=FFFFFFFFDBC17BC1 R13=0000000110011200 R14=0000000111C94468 R15=000000011009C300
R16=00000001111783B0 R17=0000000111D6F1F8 R18=09001000A26B75F0 R19=0000000000000185
R20=0000000111D6F1D8 R21=0000000111C944F0 R22=000000011009C380 R23=0000000000000000
R24=BADC0FFEE0DDF00D R25=0000000000000000 R26=000000011009C300 R27=0000000110018F50
R28=0000000000000000 R29=09001000A26A0DF0 R30=0FFFFFFFFFFFED80 R31=07000000002652B0
IAR=09000000176FFEB0 LR=00000001109539DC MSR=A00000000000D032 CTR=09000000176FFEB0
CR=2258582420000002 FPSCR=8202200000000000 XER=2000000282022000
FPR0 3fe8000000000000 (f: 0.000000, d: 7.500000e-01)
FPR1 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR2 3fe8000000000000 (f: 0.000000, d: 7.500000e-01)
FPR3 c530000000000000 (f: 0.000000, d: -1.934281e+25)
FPR4 3f30000000000000 (f: 0.000000, d: 2.441406e-04)
FPR5 4330000000000000 (f: 0.000000, d: 4.503600e+15)
FPR6 3fb9999999999999 (f: 2576980480.000000, d: 1.000000e-01)
FPR7 3c63333333333333 (f: 858993472.000000, d: 8.326673e-18)
FPR8 0000000082024000 (f: 2181185536.000000, d: 1.077649e-314)
FPR9 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR10 4330000000000000 (f: 0.000000, d: 4.503600e+15)
FPR11 4000000000000000 (f: 0.000000, d: 2.000000e+00)
FPR12 3fe8000000000000 (f: 0.000000, d: 7.500000e-01)
FPR13 3ff8000000000000 (f: 0.000000, d: 1.500000e+00)
FPR14 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR15 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR16 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR17 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR18 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR19 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR20 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR21 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR22 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR23 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR24 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR25 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR26 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR27 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR28 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR29 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR30 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR31 0000000000000000 (f: 0.000000, d: 0.000000e+00)
Module=/usr/sap/ccms/wilyintroscope/jre/bin/libj9jit23.so
Module_base_address=09000000176CB000
Target=2_30_20071004_14218_BHdSMr (AIX 6.1)
CPU=ppc64 (16 logical CPUs) (0x400000000 RAM)
JVMDUMP006I Processing Dump Event "gpf", detail "" - Please Wait.
JVMDUMP007I JVM Requesting System Dump using '/usr/sap/ccms/wilyintroscope/core.20110503.085037.12910716.dmp'
JVMDUMP010I System Dump written to /usr/sap/ccms/wilyintroscope/core.20110503.085037.12910716.dmp
JVMDUMP007I JVM Requesting Snap Dump using '/usr/sap/ccms/wilyintroscope/Snap0002.20110503.085037.12910716.trc'
JVMDUMP010I Snap Dump written to /usr/sap/ccms/wilyintroscope/Snap0002.20110503.085037.12910716.trc
JVMDUMP007I JVM Requesting Java Dump using '/usr/sap/ccms/wilyintroscope/javacore.20110503.085037.12910716.txt'
JVMDUMP012E Error in Java Dump: /usr/sap/ccms/wilyintroscope/javacore.20110503.085037.12910716.txt
JVMDUMP013I Processed Dump Event "gpf", detail "". -
Wily Introscope 8.2.2 - No License for Wrapper service
Hi All,
I've installed the Wily Introscope Manager 8.2.2. When starting the EM service, I get the following error message in the log file:
STATUS | wrapper | 2010/09/20 15:10:47 | --> Wrapper Started as Service
STATUS | wrapper | 2010/09/20 15:10:47 | Java Service Wrapper Standard Edition 32-bit 3.3.6
STATUS | wrapper | 2010/09/20 15:10:47 | Copyright (C) 1999-2009 Tanuki Software, Ltd. All Rights Reserved.
STATUS | wrapper | 2010/09/20 15:10:47 | http://wrapper.tanukisoftware.org
STATUS | wrapper | 2010/09/20 15:10:47 |
ERROR | wrapper | 2010/09/20 15:10:47 | License Error:
ERROR | wrapper | 2010/09/20 15:10:47 | A valid license was not found in the Wrapper configuration file.
ERROR | wrapper | 2010/09/20 15:10:47 |
ERROR | wrapper | 2010/09/20 15:10:47 | A license can be obtained from the Java Service Wrapper site:
ERROR | wrapper | 2010/09/20 15:10:47 | http://wrapper.tanukisoftware.org/doc/english/purchase.html
I believe that Wily is licensed as part of the Solution Manager Enterprise edition. So why do I need to buy an additional license?
Regards,
MasoudHi
For the Wily Introscope Enterprise Manager 8.2 the error you described
occurs if the em-include.conf file is missing in the EM' installation.
This file is included into the SAP managed modules SAPISMM02_0*.SAR
file.
Note that for Wily Introscope EM 8.2.2 you need to install the SAP
management modules after the installation of the EM 8.2.2 AND before
you attempt to start the service
Please refer to the Node 797147 for the documentation about the
the SAPISMM02_0*.SAR - management modules to be installed on top of
Enterprise Manager.
Please consider additionally the Note 1273028
- The Enterprise Manager can only be launched as Windows Service
after the latest management module package (SAPISMM) has been
installed. The SAPISMM package contains a file em-include.conf
which is required.
I would like to ask you to implement the Note 1273028 and to retest the
issue.
Best Regards
Jai Wardhan -
SOLMAN SMD Wily Introscope: no dashboards are available
Hi!
I would like to use the SAP SMD functions and Wily Introscope 8.0
I am on SAP SOLMAN 7.0 EhP1.
The problem I have: when I start Wily Introscope no dashboards are available.
Can some one help me to solve this problem?
Thank you very much!
regards
AxelYou might have already checked the SAP Note 797147 and installation guide for Wily I 8.0 at
http://service.sap.com/instguides -> Installation & Upgrade Guides -> SAP Components -> SAP Solution Manager -> Release 7.0 -> Wily Introscope 8.0 - Installation Guide
From the installation guide could you confirm section ..."Check That Introscope Is Running Properly"
Also confirm you have set Java VM Parameters...
I think you need to check the Installation guide thoroughly.
Let us know if you have any error log or something....
All the best. -
Wily Introscope Installation Issue
I've been trying to install the Wily Introscope Enterprise Manager onto my Solution Manager server for several days now but I'm running into a lot of issues. I have unpacked SAPISEM8SP01_00-10007429.SAR & SAPISEM80_03-10007433.SAR but the silent installation is not providing any errors or information on the installation. I've tried just about everything to get introscope8.0.2.0windowsAMD64SAP.exe to run on my server but it still does nothing. Has anyone run into this issue?
was able to finally get the installer to work by using package
SAPISEM8SP01_00-10007433.SAR. Not sure why the others were not working
but the agent works fine now. -
Dear Thinkpad users. After many failures and zero support from official resources, this is a comprehensive, unbiased installation procedure for the official ATI driver with Catalyst Control Center for Radeon X1300, X1400, V5200 graphic cards on Windows 8.1. In my experience, the latest driver for these cards written for Windows Vista 32-/64-bit works flawlessly on Windows 8.1 and you will benefit from multi-monitor support, full HW-acceleration and the PowerPlay option in Catalyst Control Center as well. Install only the official ATI driver, no other modification required. (The installation may work also on non-Thinkpad systems, such as Dell etc. but I have not tested it on that systems)
Installation procedure:
1. Before installation, ensure you are logged as an administrator
2. Go to ‘Control Panel’ -> ‘Power Options’ and click on ‘Choose what the power buttons do’ option from the list on the left side of the window
3. Go to ‘Shut-down settings’ on the bottom and disable ‘Turn on fast start-up (recommended)’. Unchecking that checkbox is very important because it will prevent the problem with start-up black screen on the computer.
4. Go to ‘Control Panel’ again and choose ‘Programs and Features’, then click on ‘Turn Windows features on or off’
5. Select the checkbox ‘.NET Framework 3.5 (includes .NET 2.0 and 3.0) to turn it on and wait until the installation is completed
6. Go to Windows update and install all important updates including those for ‘.NET Framework 3.5 as well
7. Download ATI video driver from the website of your hardware vendor. For Lenovo Thinkpad T60, T60p users the latest ATI video driver is for Windows Vista (32-bit, 64-bit), please visit http://support.lenovo.com/ca/en/products/laptops-and-netbooks/thinkpad-t-series-laptops/thinkpad-t60... and download the driver
8. Once you have the driver downloaded right-click on the file and choose ‘Properties’ from the drop-down menu.
9. Click on ‘Compatibility’ card then ‘Change settings for all users’ and check in the checkbox at ‘Compatibility mode’ with the option for Windows Vista as well as at ‘Run this program as an administrator’
10. Double left-click and install the program.
11. Go to the location ‘C:\drivers\WIN\VIDEO and open the file ‘Bin’ (for Windows 8.1 32-bit users) or ‘Bin64’ (for Windows 8.1 64-bit users)
12. Right click on ‘Setup’ file; choose ‘Properties’ from the drop-down menu and repeat the step 9
13. Once you have set the properties, double left-click on that file and install the driver
14. Follow the installation instructions and finish the installation
15. Restart the computer
cheershey , can u help me ? i am having the same problem
-
Oracle Installation or Uninstallation Solutions For Windows 95/98/2000/ME/NT/XP
You must read carefully the following steps here. If you previously installed any Oracle's products on your machine, I strongly recommend you to clean up thoroughly before install the new products.
================================================================
Uninstallation
The easiest way to remove ALL traces of Oracle software, for an 8i installation, is:
(1) Using regedit, remove the key \\HKEY_LOCAL_MACHINE\\SOFTWARE\ORACLE.
(2) Remove all the Oracle services (usually called Ora-something) from \\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
(3) Go to the ORACLE_HOME directory (usually C:\Oracle\Ora81). Go to the BIN directory beneath this. Rename the file OCIW32.DLL to something like OCIW32.OLD.
(4) Reboot your box.
(5) Once you have logged on again, delete the directories C:\Program Files\Oracle and C:\Oracle.
(6) Right-click on My Computer, select Properties->Environment. Edit the environmental variable PATH to remove all refernces to files in the two directories you have just deleted.
(7) Remove the Oracle folders from your Start menu.
*** Obviously, using regedit on your machine always entails risks, and I won't be held responsible if you end up trashing your system. However, the above procedure is one I have used many times with complete success. You have been warned! ;) ***
As to logging on, the "standard" Oracle accounts are:
SYS/change_on_install (SYSDBA - database owner)
SYSTEM/manager (Owns various VIEWs and utility PACKAGEs)
and (optionally):
SCOTT/tiger (Training account containing some sample tables)
If you're using PO8i on the local machine, you shouldn't need to worry about setting up NET*8 (Oracle's networking protocols)
=================================================================
Windows 95 and 98
This will remove all Oracle products, Oracle services, and Oracle registry entries from your computer.
Complete the following steps to create a Clean Machine. Backup any relevant databases before proceeding!
On Windows 95 and Windows 98:
1. Ensure you shutdown your Oracle. Right click on the Oracle Icon in the toolbar and click on the shutdown option.
2. Un-install all your Oracle products if possible. Use universal installer to do that. Ignore this step if you dont have universal installer on your machine.
3. In regedit, go to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE.
4. Delete the ORACLE key.
5. Edit your AUTOEXEC.BAT file and remove your %ORACLE_HOME%\bin and JRE paths from the path setting.
6. From the Windows Explorer (or from the command prompt), delete the Oracle directory (Oracle Base).
7. Delete <system_drive>:\Program Files\Oracle (from the Windows NT Explorer or from the command prompt).
8. Delete Icons from <system_drive>: \Windows\Start Menu\Programs\Oracle - <HOME> and <system_drive>:\Windows\StartMenu\Programs\Oracle Installation Products. Where <HOME> is the previous HOME name.
9. Reboot your computer.
On Windows NT:
1. Ensure you are logged in as a user with Administrator privileges.
2. Stop all Oracle Services through Control Panel Services. Use universal installer to un-install your Oracle products. Ignore un-install if you dont have universal installer on your machine.
3. Using regedit (at the command prompt, type regedit), go to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE and delete the ORACLE key.
4. Open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services, and remove all keys under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services that begin with ORACLE.
5. Open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application, and remove all keys under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application that begin with ORACLE.
6. Close regedit.
7. From the Control Panel, open System.
8. If JRE was installed by Oracle, remove the %ORACLE_HOME%\BIN path and the JRE path. For example, you may see a path similar to this one: C:\ORACLE\ORAxx\BIN;G: \Program Files\Oracle\jre\1.1.7\bin. Go to Start > Control Panel > System > Environment tab. Click on the system variable path and modify the path.
9. Delete Icons from <system_drive>:\Winnt\Profiles\All Users\Start Menu\Programs\Oracle - <HOME> and <system_drive>:\Winnt\Profiles\All Users\Start Menu\Programs\Oracle Installation Products. Where <HOME> is the previous HOME name.
10. Delete <system_drive>:\Program Files\Oracle (from the Windows NT Explorer or from the command prompt).
11. Reboot your computer.
12. Delete all ORACLE_BASE directories (You can find the Oracle homes listed in HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\ORACLE_HOMES).
================================================================
Doc ID:
Note:131299.1
Subject:
Oracle Installer 8.1.X Hangs on Machines with Pentium 4
Processors
Type:
ALERT
Status:
PUBLISHED
Content
Type:
TEXT/PLAIN
Creation
Date:
02-JAN-2001
Last
Revision Date:
18-APR-2001
This alert was modified 16-January-2001 by specifying specific
Oracle Universal
Installer Versions in the the Versions Affected section.
Oracle Universal Installer (OUI) for 8.1.x Hangs on Machines
with Pentium 4
Processors
~~~~~~~~~~~~~~~~~~
Versions Affected
~~~~~~~~~~~~~~~~~
Oracle 8.1.5
============
Oracle Universal Installer 1.6.0.9.0
Oracle 8.1.6
=============
Oracle Universal Installer 1.7.0.19.0
Oracle 8.1.7
==============
Oracle Universal Installer 1.7.1.9.0
Platforms Affected
~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000
and NetWare platforms are confirmed to be affected.
Description
~~~~~~~~~~~
When installing Oracle Products with the Oracle Universal
Installer (8.1.x)
on machines that use the Sun JRE and Symmantec JIT, the
installer hangs.
Specifically for the Windows platform, the following version
of the Symmantec
JIT or earlier will encounter the failure:
Symantec Java! JustInTime Compiler Version 3.10.107 for JDK
1.2.
Details regarding this issue can be found at:
http://developer.intel.com/design/processor/future/manuals/knowni ssue.htm
How to determine if you have Symmantec Java for JDK 1.2:
1. Select the file "symcjit.dll" and right click on it.
2. Select Properties, then the Version tab.
3. Under Microsoft Windows*, the properties of the DLL are:
"Symantec Java! JustInTime Compiler Version 3.10.107 for
JDK 1.2 Copyright (C)
1996-99 Symantec Corporation Dynamic Link Library file".
DLLs older than this will also not work. "
Likelihood of Occurrence
~~~~~~~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000 and NetWare platforms are confirmed to be
affected.
Possible Symptoms
~~~~~~~~~~~~~~~~~
The failure typically is that the affected application simply
terminates.
Workaround
~~~~~~~~~~
Not only will OUI be affected by this bug, most of the
post-install
configuration tools will also be affected. Running these
tools with "-nojit"
specified will avoid the hang, but it is not simple to specify
"-nojit" for
some of the products.
The following workaround works for the Windows operating
system:
a. Copy only the install directory from the CD to the hard
disk ,say, e:\temp.
b. Open oraparam.ini and make the following modifications
(Assuming CD
drive is f:)
* Change the "SOURCE=" line to use the full path to the CD
instead of a
relative path. (i.e., SOURCE=f:\stage\products.jar)
* Change the "JRE_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
JRE_LOCATION=f:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles
\Expanded)
* Change the "OUI_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
OUI_LOCATION=f:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataF
iles\Expanded
* Change the "JRE_MEMORY_OPTIONS" line to add "-nojit" as the
first argument.
(i.e., JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m)
^^^^^^
* Other entries should remain the same
c. Launch setup.exe from the temporary location on your hard
drive (i.e.
e:\temp\install\win32\setup.exe). This will use the
modified
oraparam.ini and pick up the information from the CD since
the absolute
locations are specified.
Choose a Custom install and choose not to create a database
during the
install. This way, the Database Configuration Assistant will
not be launched
during installation.
The Net8 Configuration Assistant will still be launched, and
there is no way
to suppress it. You will need to kill the Net8 Configuration
Assistant if it
hangs due to the bug. The installation still will have been
successful, and
you can run the DBCA and NetCA after installation.
To kill NetCA if it hangs during installation:
In the "Configuration Tools" window, highlight the "Net8
Configuration
Assistant" and click "Stop". If that does not work, look for
the most recent
JRE process using the Task Manager, and kill it manually.
NOTE: the OUI
itself will also have a jre process. Be sure to kill the one
with the most
recent date, which should be the jre process being used for
Net8CA, not the
one for OUI itself.
After killing the configuration tools and continuing through
the installation
to the "End of Installation" screen, you should modify the
configuration tools
to use "-nojit", then call the appropriate tools from the
Start Menu.
Once installation is complete, each of the following files in
the ORACLE_HOME
needs to be modified:
assistants\dbca\dbassist.cl
assistants\dbma\dbmig.cl
assistants\ifa\ifa.cl
bin\elogin.cl
bin\owm.cl
ldap\oidamdin\oidadmin.cl
network\tools\netasst.cl
network\tools\netca.cl
owm\install\instelogin.cl
owm\install\instowm.cl
Edit the contents of the above files to add "-nojit" as shown
below:
Command=("C:\Program Files\Oracle\jre\1.1.7\BIN\JREW" -nojit
-classpath ....
this is the only thing you need to add --> ^^^^^^
Then, launch the necessary tools, like Net8CA and DBCA from
the Start Menu.
Patches
~~~~~~~
Currently there is not a patched installer available to deal
with this
problem, the workaround listed above must be used.
References
~~~~~~~~~~
[BUG:1507768] INSTALLER FAILS WHEN RUNNING ON NEW PENTIUM 4
(IV) PROCESSORS
[BUG:1507946] INSTALLER FAILS WHEN RUNNING ON NEW INTEL
PENTIUM 4 (IV) PROCESSORS
@[BUG:1518935] SYMCJIT.DLL DOESN'T WORK WITH THE NEW P4
PROCESSORS
Oracle
Support Services.
Copyright (c) 1995,2000 Oracle Corporation. All Rights
Reserved. Legal Notices and Terms of Use.
================================================================
The solution of making a local copy of the installation CD on
the hard disk and renameing symcjit.dll to symcjit.old does
work to allow installation of Oracle Client 8.1.7 on a Pentium 4
This function is useful and you can find two file to rename
===============================================================
Windows ME
Solution to the installation of Oraclei8.1.7 PE in Windows Millennium
Oracle does not support installing version 8.1.7 PE into
Windows Millennium.
As an unsupported workaround, you may add the following line
to the [compatibility95] section of win.ini prior to
installation:
Jrew=0x00080000
After setup is complete, Oracle will recommend a reboot.
There is one additional step necessary prior to reboot;
Oracle may add a non-standard path statement to the
autoexec.bat file. Please modify this SET PATH
statement to use short-filenames if you find a quoted
LFN string represented as part of the path. You can
confirm that the path was merged successfully into the
registry after reboot by examining the PATH variable
in the registry at
HKLM\System\CurrentControlSet\Control\SessionManager\Environment
Symptoms of a missing Oracle path statement in the registry are that Net8 Easy Config will not launch.
Please note that Oracle does not support the use of this
product in Windows ME, but have authorized these workarounds
for testing purposes only.
===============================================================
Windows XP Home Edition
Oracle 8i is not certified on windows XP. Even if yes, it must be Windows XP Professional.
You can install Oracle8i on windows XP Home Edition, try like this:
1 - Copy your Oracle CD into hard disk in your
machine. For example Copy from oracle8i CD into C:\Oracle\ ...
2 - Search the two files named Symcjit.dll on the D drive (where you have copied Oracle8i. You can found them in (example):
C:\Oracle\stage\Components\oracle.swd.jre\1.1.7.30\1
\DataFiles\Expanded\jre\win32\bin\symcjit.dll
3 - Rename this file (Example): symcjit_back.dll (make sure to find two files and rename them)
4 - Execute the Oracle setup.exe from C:\Oracle\setup.exe
===============================================================
When Oracle 8i dies on the install or the installer hangs, here is the fix for this, make sure that you have Service Pack 2 installed.
1. \JRE\1.3.1\ From Sun. (You can download java program at http://java.sun.com/products/jdk/1.1/jre/download-jre-windows.html)
2. Install the java file.
There is also a problem in the installation disk.
3. Make a copy of the Oracle 8i disk on the local hard disk.
4. Do a search for the two files called symcjit.dll and rename them for example: symcjit.old.
5. Install Oracle from the win32 directory.
================================================================
PLEASE NOTE THAT ORACLE DOESN'T SUPPORT THE USE OF THOSE PRODUCTS IN WINDOWS ME, BUT HAVE AUTHORIZED THESE WORKAROUNDS FOR TESTING PURPOSES ONLY
Best Regards,
Beau LeoHi,Beau Leo, I am having problem installing Oracle9i Database Rel.2 on my pc.
I read the suggestion and solution you posted for fixing Oracle 8.1.x installation
probblem, and since my pc also hung at 48% while installing Oracle 9i software,
I wonder if the same problem in the Oracle8 Vs.Pentium4 also exists for Oracle9i.
I have Windows2000,256RAM, Pentium3 1Ghz, and 13.8 free diskspace. But the installation always
hangs at 48%, my computer will just shut down and restart automatically without
even showing an error message. I have tried installing the Enterprise edition for 3
times already but everytime encountered the same problem. I've also tried custom installation
by selecting not to create database, but it also hung.
Before I started each installation, I always made sure that my registry and environment
path are cleared and that all the partially-installed Oracle files are deleted.
I hope that you or anyone who has a solution for this problem could be so kindly to help me out.
Thank you in advance.
ailee -
Oracle 11G database for 64 bit windows installation error
Hi,
I downloaded the 11G 64bit for windows and unzipped the files into one folder and ran the setup.exe as an administrator. It opened up the java screen and I chose, create and configure a database. Next screen I chose, Desktop Class, when I click next it dies. It does not show me teh next screen. I went to the appdata folder and saw this error but not sure what to do EXCEPTION_ACCESS_VIOLATION (0xc0000005). Please help. Thanks for your time and help.Adipur wrote:
Hello, have you tried to create new administrator user, and install using that newly created user...?You found this to be a band-aid solution in your specific instance. (Strange case of installation on windows 7 - unable to complete installation But you have drawn the wrong conclusions and never found the real issue in the cited thread. Under the circumstances, I would not be offering this up as a generalized solution, as you are doing in this thread and in others:
Re: Oracle 11G database for 64 bit windows installation error
Re: Trouble installing Oracle Personal in Windows 7 64-bit environment
I have been doing Oracle DBA work since v 7.3, and have never seen advice like this to be anything more than a work-around the real issue.
Edited by: EdStevens on May 15, 2013 7:03 AM -
Need FireFox installations from version 3 till present for MAC and Windows
Good day!
I am working for a Software Testing Company, and I need installations for FireFox from Version 3 to present. for Mac and Windows. Is there any way I can get these installations, Cant seem to find them on website.
It will be very much appreciated if you can help.
Thank you
Reinhart Buit
[email protected]ftp://ftp.mozilla.org/pub/firefox/releases/
-
I was using firefox 5.0.1 & it was crashing frequently.I removed the installation & tried to reinstall.I getting a window asking for adminstrator password.Even after entering password,firefox was not getting installed
Sorry you are having problems. First of all try Fifrefox's safemode.
*[[Troubleshoot Firefox issues using Safe Mode]]
If that works post back for further advice.
Next step, if safe mode did not work.
<u>First: Try a clean install, <sub>(you have had a none standard version installed previously)</sub></u><br /> that involves deleting the program files. Then if necessary try troubleshooting by creating and using a clean empty Firefox profile.
See
* this recent post [/questions/940399#answer-377134]
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
<u>Second: try a New Profile</u>
*http://kb.mozillazine.org/Profile_Manager#Creating_a_new_profile
* this will be an additional profile, it is still worth backing up any existing or currently working profile on a regular basis
**[[Back up and restore information in Firefox profiles]]
* Until you are absolutely confident about the repercussions I suggest
** always use an empty folder when creating a new profile
** never delete or rename profiles, just disable or remove shortcuts
** after creating a new test profile open it and check for any addons or plugins that may be have been included by default -
Problem Wily Introscope Installation!
Hi,
I can not install on the server of the Solution Manager Wily Introscope ENTPR MGR 8 -> AIX 64bit 5.3 - java version "1.4.2"
Java (TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142-20061124 (SR7) (JIT enabled: jitc)
Used files are:
SAPISEM8SP01_00-10007374.SAR
osgiPackages.v1.1.unix.tar
eula.txt
Can you help?
Best Regards.Hi,
I installed the EM as explained Inst.Guide_Introscope Ver.8 for SAP
using the files:
SAPISEM8SP01_00-10007374.SAR (introscope8.1.0.0aix64SAP.bin)
SAPISMM8SP01_00-10007429.SAR (management modules)
Then I deploy with SDM the ISAGENTSMD801_01-10007435.SCA.
Then I launched SOLMAN_SETUP:
Initial Configuration -> ok (green)
Basic Configuration -> ok (green)
Managed System Configuration select the stack of hava Solman and click on "Configure System", Diagnostics Prerequisites are ok.
In step 2 "Manual Configuration":
-Install Diagnostics Agent (it was previously done by SDM)
-Assign Diagnostc Agent -> Open URL -> Agent Administrator
The problem arises at this point if you click on "Show offline agents" list is empty!
Then I also tried to install the Wily Introscope Agent at hand but might as well not start.
Can you help?
My Solution Manager has been upgraded to 'EHP1 on AIX 5L with JVM:
Java VM version: J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142-20090307 (SR13) (JIT enabled: jitc)
Java VM vendor: Classic VM (IBM Corporation)
java vm type: <default>
java vm cpu: ppc64
Regards.
Diego.
Maybe you are looking for
-
IPod won't connect to iTunes! PLEASE HELP!
When I plug in iPod Touch 4g with iOS 5.1 a little window pops up saying something like 'This iPod cannot be used because the Apple Mobile Device is not started'! WHAT OES IT MEAN! The iPod does not pop up under devices or anything!? PLEASE HELP!
-
Oracle errors in alert.log
Hello guys, I have the following Oracle Release 10.2.0.1.0 server configuration: - Windows 2003 Server SP2 - 3,25 GB RAM (I think that is a 4 GB but this is a windows 2003 standard edition) - 2 Intel Xeon Quad core - 3 disk partitions (C -> 40GB, 25
-
I want that the breadcrumbs in my UIX aplication grows dynamically while you are visiting pages and i would like specify the text to show. So, i have created an UIX template for all my pages like this: <provider> <data name="breadCrumbs"> <method cla
-
I can't receive some iCal invitations in MS Exchange Outlook.
At work I use MS Exchange Outlook. I also use an iPhone and an iPad. When certain people send me iCal invitations, I don't receive an email in MS Exchange Outlook and, therefore, can't add them to my MS Exchange Outlook calendar. When they appear in
-
I keep losing the cloud icon from the library menu.
I keep losing the cloud icon, and the photos i downloaded from the cloud, from the iphoto library menu. It was there and now its not. Second time. FIrst time i deleted iphoto and re-downloaded from the app store. iCloud works with my other machines a