Installation server 8.1.0.124 failure on remote installation

Hello
I'm trying to Execute Process Remotely on a Workstation but failed. The NwSapSetupAdmin.log is written:
NwSapsAtlC 1 Failure in executing c:\new_inst\Setup\NwSapSetup.exe /Silent /Package="Package1" on ...(pc). Check parameters, credentials and verify if the Windows workstation is running!
Executing the above command on the pc like
.(server)...\new_inst\Setup\NwSapSetup.exe /Silent /Package="Package1" it runs succesfully.
Any help please.
Thanks in advance.

Correction :
i'm use now 8.1.0.124 the "remote" are here.
Regards.

Similar Messages

Primary site server a single point of failure?

I'm installing ConfigMgr 2012 R2, and employing a redundant design as much as possible. I have 2 servers, call them CM01,CM02, in a single primary site, and on each server I have installed the following roles: Management Point, Distribution Point, Software
Update Point, as well as the installing the SMS Provider on both servers. SQL is on a 3rd box.
I am now testing failover from a client perspective by powering down CM01 and querying the current management point on the client: (get-wmiobject -namespace root\ccm -class ccm_authority).CurrentManagementPoint . The management point assigned to
the client flips to the the 2nd server, CM02, as expected. However, when I try to open the CM management console, I cannot connect to the Site, and reading SMSAdminUI log reveals this error: "Provider machine not found".
Is the Primary site server a single point of failure?
Why can't I point the console to a secondary SMS provider?
If this just isn't possible, what is the course of action to restore console access once the Primary Site server is down?
Many Thanks

Yes, that is a completely false statement. Using a CAS and multiple primaries in fact will introduce multiple single points of failure. The only technical Eason for a CAD a multiple primary sites is for scale out; i.e., supporting 100,000+ managed systems.
HA is achieved from a client perspective by adding multiple site systems hosting the client facing roles: MP, DP, SUP, App Catalog.
Beyond that, all other roles are non-critical to client operations and thus have no built-in HA mechanism. This includes the site server itself also.
The real question is what service that ConfigMgr provides do you need HA for?
Jason | http://blog.configmgrftw.com

Error "Failure enabling remote wakeup" with USB driver

Hi all,
I have an strange issue with an USB device, used to manage PCMCIA cards.
Running 'cfgadm' command, the OS (Solaris 10 Sparc) recognizes the USB device:
Ap_Id Type Receptacle Occupant Condition
c2 scsi-bus connected configured unknown
usb0/1 usb-device connected configured ok
usb0/2 unknown empty unconfigured ok
But when I try to access the PCMCIA tokens with the client app, it returns errors like "card not found".
The /var/adm/messages shows these errors:
Oct 1 16:58:51 FSS0X022 lunausb: [ID 429894 kern.notice] Luna USB Driver 2.3.0.1 Aug 12 2009 15:47:08
Oct 1 16:58:51 FSS0X022 lunausb: [ID 129115 kern.notice] parse_level set to dump everything
Oct 1 16:58:51 FSS0X022 lunausb: [ID 926692 kern.notice] attach: Disabled endpoint (ep3intr)
Oct 1 16:58:51 FSS0X022 lunausb: [ID 420010 kern.notice] init_power_mgmt enter
Oct 1 16:58:51 FSS0X022 lunausb: [ID 734669 kern.notice] initpower_mgmt: failure enabling remote wakeup
Oct 1 16:58:51 FSS0X022 lunausb: [ID 995346 kern.notice] initpower_mgmt: end
Oct 1 16:58:51 FSS0X022 lunausb: [ID 332559 kern.notice] attach: Could not initialize power mgmt
Oct 1 16:58:51 FSS0X022 usba: [ID 912658 kern.info] USB 2.0 device (usb4b9,f200) operating at full speed (USB 1.x) on USB 1.10 root hub: device@1, lunausb0 at bus address 2
Oct 1 16:58:51 FSS0X022 usba: [ID 349649 kern.info] lunausb-lh7 000000000000
Oct 1 16:58:51 FSS0X022 genunix: [ID 936769 kern.info] lunausb0 is /pci@83,4000/usb@a/device@1
I have restarted the "/system/power:default" service and rebooted. I have tried to disable the service, too.
But the driver always show the message "Failure enabling remote wakeup/Could not initalize power mgmt", and the client application still shows the access error.
Can anyone help me, please.
Thanks and regards.

Hi all,
I have an strange issue with an USB device, used to manage PCMCIA cards.
Running 'cfgadm' command, the OS (Solaris 10 Sparc) recognizes the USB device:
Ap_Id Type Receptacle Occupant Condition
c2 scsi-bus connected configured unknown
usb0/1 usb-device connected configured ok
usb0/2 unknown empty unconfigured ok
But when I try to access the PCMCIA tokens with the client app, it returns errors like "card not found".
The /var/adm/messages shows these errors:
Oct 1 16:58:51 FSS0X022 lunausb: [ID 429894 kern.notice] Luna USB Driver 2.3.0.1 Aug 12 2009 15:47:08
Oct 1 16:58:51 FSS0X022 lunausb: [ID 129115 kern.notice] parse_level set to dump everything
Oct 1 16:58:51 FSS0X022 lunausb: [ID 926692 kern.notice] attach: Disabled endpoint (ep3intr)
Oct 1 16:58:51 FSS0X022 lunausb: [ID 420010 kern.notice] init_power_mgmt enter
Oct 1 16:58:51 FSS0X022 lunausb: [ID 734669 kern.notice] initpower_mgmt: failure enabling remote wakeup
Oct 1 16:58:51 FSS0X022 lunausb: [ID 995346 kern.notice] initpower_mgmt: end
Oct 1 16:58:51 FSS0X022 lunausb: [ID 332559 kern.notice] attach: Could not initialize power mgmt
Oct 1 16:58:51 FSS0X022 usba: [ID 912658 kern.info] USB 2.0 device (usb4b9,f200) operating at full speed (USB 1.x) on USB 1.10 root hub: device@1, lunausb0 at bus address 2
Oct 1 16:58:51 FSS0X022 usba: [ID 349649 kern.info] lunausb-lh7 000000000000
Oct 1 16:58:51 FSS0X022 genunix: [ID 936769 kern.info] lunausb0 is /pci@83,4000/usb@a/device@1
I have restarted the "/system/power:default" service and rebooted. I have tried to disable the service, too.
But the driver always show the message "Failure enabling remote wakeup/Could not initalize power mgmt", and the client application still shows the access error.
Can anyone help me, please.
Thanks and regards.

Cant Create VDI collection in server 2012 r2 Transfer location failure

I'm setting up a 2012 R2 VDI install and having problems creating the VDI collection. No matter what target folder I specify as the transfer location, it says "VDI collection failed with the following errors: Unable to copy the virtual desktop to the
export location. Check if the export location exists and if it is configured with the correct permissions."
That has to be an erroneous error because when I type the share location into the Deployment properties, it checks for the share an won't let me specify an invalid location.
I've tried uninstalling and reinstalling RDS as completely as I can but I cant seem to get rid of this problem. Where are these deployment properties stored and how can I delete them so they get recreated by the install?
Please help!

It turns out that the error was not a problem with the transfer share. Something in the configuration prevented the hyper-v host server from connecting to the broker where the transfer share was located. Net use commands run the host produced an "error
53". Removing the Hyper-V did NOT solve the problem nor did removing the updated network drivers. The only solution I found was to remove the entire RDS installation from all the servers in the installation and reload Windows server 2012 R2 on the Hyper-V
host from scratch.
Once those tasks were completed, everything ran as expected.
I found the following article to actually be useful: http: //blog.itvce.com/?p=1569
It clearly explains most of the steps to install RDS VDIs simply and quickly. I'm still waiting for Microsoft to produce a simple brief step by step that includes component high availability and that explains how the system actually works both from a user
perspective as well as an administrator role. While it may exist out there somewhere, It is obscured by the countless third-party attempts to document these steps.
I'm disappointed that MS leaves it to third parties to document their products.
As for this installation, you must figure out the steps in a test environment and be prepared to rebuild your servers along the way, as uninstalling the RDS product components does not work properly as is typical with many MS products of the past. Also,
make sure all your chipset and network drivers are up to date as many of mine installed using "MS generic" drivers that simply do not work properly in the Hyper-V environment.

Windows server 2008 R2 x64 Authentication failure while try to access Windows server 2003 R2

Hello,
I try to access Windows Server 2003 R2 Standard from Windows Server 2008 R2 x64 standard using integrated windows authentication . And because my application tries to read SQL server i'm getting and error that user is not trusted. Then I tried to open a
simple shared folder on 2003 and none of the users is able to do it. Both servers are part of common workgroup in the same IP range. Using domain is not an option. Migrating 2003 to 2008 is not an option either. The specific DB provider I have to use
supports only windows authentication, so creating user into SQL server is not an option too. I have tested many applications and cases which requires/uses windows authentication and non of the manage to connect.
Any help is very welcome because things are urgent!
Authentication failure

That method in workgroup mode may be a problem.
Authentication in SQL Server
Might ask them over here.
SQL Server forums on
MSDN
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

SQL Server Agent - Email on job failure

Hi,
I have a SSIS package that is scheduled to run every midnight. Is there a way to send an email to a particular user when the package fails to run? I know there is a Notification on the package, I tried once but it didn't send anything. Is there an article that
explains the step by step process?
Thanks!
Akshay Adivarekar

Hi Vaibhav,
One more thing,
If i want to add a cause of failing (Package ) in mail body. How can i achieved that and also i want to send same email to multiple user then.
Regards,
Akshay
Akshay Adivarekar
Bit long process, however I have implemented this earlier :)
1. Create SP - usp_sendTextMail
sends out mail by passing parameters such as To, Body, Subject...
2. Create SP - usp_SendErrorEmail
    Declare required variables such as @To, @Subject, @Body etc
    Set @Body = 'Package failed with ' + @Error etc..
    EXEC usp_SendTextEmail @To, @Subject, @Body --> Call sp to send mail
3. Package onTaskFailed/OnError event, have one Execute SQL Task.
    In SQL statement use - Exec usp_SendErrorEmail ?,?,?
    Parameters tab - Set the variables such as @Recipients, @SysErrorDesc etc..
    Here @Recipients would be the list of EmailID's which you can configure in SQL Package configuration.
    For Ex: In Dev Server, @Recipient value =
'[email protected]; [email protected]'
                in Prod Server, @Recipient value =
'[email protected];
[email protected] ' (Client list)
-Vaibhav Chaudhari

WebLogic Server 6.0sp2 Windows Service Failures

I am trying to run WebLogic (with SSL) as a service instead of a task. The installNTService
cmd script runs ok but when the service is started it fails without any error
messages. The service runs for about 5 seconds. I cannot find any error messages
in the log. Any ideas of where to start looking?
Thanks,
Deb

It looks like you are mixing SP1 and SP4 components in the server classpath.
Leaving aside the issue of supporting WL 6.1 ( nearly 10 years old! ), you should look at the classpath which will be listed in the server's log file when it starts up.
If this error has just recently started, has there been a modification to the startup scripts, or has there been a new patch installed?

Server.app 3.2.1 Failure/Issue summary

Hello everybody,
since my Server broken down with the current update I read about so many problems with Server 3.2.1.
I like to give everybody a list of discussed Problems. I hope Apple will fix all this issues soon as possible:
1. ProfileManager migration failed, 2. cant login to ProfileManager web interface (solved)
Solution: Reset history of enrollment profile and drop AppleTV's from database
Details:Server 3.2.1 update fail
Server 3.2.1 (10.9.5) – Postgres won't start (solved)
All Device to User Associations gone (NOT solved)
Calendar and address book service not working (helpful advice)Re: Cannot connect to calendar or addressbook server HTTPChannel unhandled error
UTF-8 information in Profiles scrambled (NOT solved)
Check second post on:Re: Software update says 3.2.1 installed but server info still says 3.1.2?
Re: Re: Re: Server 3.2.1 update fail
1. OpenDirectory not working, 2. Profiles not signed (NOT solved)
Re: Re: Server 3.2.1 update fail
Open Directory Service not working since Server 3.2.1
Just the issues I found ... is any body out there who has updated his server without any problems?

Thank you.
You are completely right and my test lab included only iOS 8 devices.
What I missed - the "rename" functionality presents only for supervised devices.
When my iPhone was supervised and enrolled to Profile Manager with Apple Configurator I found rename option under the gear/action menu.

Apple Server 10.0.4 Link Failure

Although I have been attempting to update my Apple Server Software to Apple Server 10.0.4 (POwerbook G4 System 10.0.4), via
http://docs.info.apple.com/article.html?artnum=120035
the link fails to work. Candidates are invited to select the software, then invited to confirm appropriate use, then invited to select the software, then invited to confirm appropriate use etc

the link is dead.
is it avaliable from the Software Update Control Panel?

Installing 10.4 Server on a XServe Dual G5 via remote from a MBP 10.5

I have just purchaced a XServe Dual G5 running 10.3 Server. The admin password is lost (purchased it from a auction). So I purchased a original OS X Server 10.4 bundle (CD and DVD). As the XServe lacks a video card I need to install the server remotely via my Macbook Pro running Leopard (10.5). I've installed the Server Tools (10.5 as 10.4 Server tools won't install) and started the XServe with the 1st CD of OS 10.4. The server started from CD and I have found the IP address the server is using in my DHCP list. The hardware address matches the xserve hardware address and a ping <ip> replies. After this all installation steps fail.
I've tried to use the Server Assistant, no servers found, not in the list, not on the IP.
I've tried to use ssh root@<ip address>, no reaction.
I've tried to use /System/Library/Serversetup/sa_srchr 224.0.0.1, no reply.
I've tried to mount the XServe on Firewire, works fine, but OS 10.4 Server won't install via my MacBook Pro, as this is Intel and my original version of 10.4 server is not universal.
I am getting desparate, is there no way that I can install OS 10.4 on this server? I need 10.4 because I run Filemaker Server, and Filemaker Server does not run on 10.5
Any idea's out there? Please?
Message was edited by: dudematters

Hi everyone, thanks for your reply. I've tried most of these solutions and read all the documents. But it didn't help me any futher. At a point I've got the ssh working, at least, got reply from the server that I had to install the ssh key, so there is communication. But then it stopped all together again. Very frustrating.
I've ordered a video card for this XServe @ 234 euro's, out of frustration, so I will be able to install my original OS 10.4 and upgrade it to the lastest 10.4 version.
I suppose that there is no upgrade .dmg from apple that will allow me to upgrade my 10.4 cd's to 10.4.7 (universal) what will create the possibility to install it from my MBP via firewire. I could not find anything.

Adding a Server 2008 R2 Domain Controller at a remote site

Hello. I have been trying to set up a hot site at a remote location. The story is long and involved but a few weeks ago it seemed to be finally working. Our setup is two mirrored 2008 R2 servers at main site, mirrored with Double Take.
The hot site is the same except that so far I only had one server working. The two sites connected via site to site VPN.
About a week later our primary server basically crashed. At first it worked but very slowly. I was on vacation at the time and so I am not sure of the sequence of events, or exactly what errors were presented, but my associate first tried rebooting.
It took over 20 minutes to boot and then it said something to the effect that no domain controllers were available (not sure about this message). He then discovered that the server at the remote site had some fsmo roles assigned to it. He transferred
the roles to the primary at the main site and then demoted the remote server to a workstation (but still a domain member).
After that, rebooting the primary was much faster and everything at the primary site is working again. Now I want to set the remote site up again, but avoid the problem. The way I originally set up the remote server was to use an IFM file, generated
from our primary. This should have made the remote server a catalog server, with DNS (which it did), but as far as I know should not have transferred any fsmo roles.
The remote server(s) are wanted to be in the same domain as the primary. They will also be mirrored from the primary (with Double Take). If we had total failure at the main site, we wish to be able to immediately begin operations at the hot site
(after a fail over). I freely admit that I am swimming out of my depth here. I am not sure that I have selected the correct architecture or used the correct options in setting up the remote servers. I am looking for information about what
went wrong, and whether some other setup is more desirable.
Thanks for any help, Russ
Russ

Philippe, thank you for you answers. I do not understand everything you said but I will address each point as best I can:
1. "In the remote site do you simply do a dcpromo / add the ADDS's role to make the server a active Domain Controller ?" Yes, but I use the method described at
http://technet.microsoft.com/en-us/library/cc753720(v=ws.10).aspx, The GUI method. At step #8 I specified to use advanced mode so I could use the IFM file.
2. "In your AD' Site and Service MMC, do you configured the remote site ?" R do not know what you mean by this. How does one configure the site as 'remote'?
3. "Do you added that remote server as a Global catalogue ?". Yes, when I built the IFM file I specified to add the global catalog.
4. "Do you added the PC in site 1, the IP of those DNS server in them ? (last of course) So the computer in the main site will talk to the remote server in case of a crash." I am not sure I understand this item. After the remote server
was added, all of the members of both domain servers automatically appeared in the DNS of all servers in the domain. I do not recall if the new items were last, but I expect that they would be.
I have since reviewed the happenings with my associate and have a little more information. The order of the problems and the actions taken are:
1. Our primary (production) system was still working but extremely slow, and he observed that the slowness was caused by a lot of traffic with the remote site. Rebooting the production server took over 25 minutes and the server to came up saying
that domain information was not available. After another 30 minutes or so he discovered that the domain data was now available and the server worked, but still slow.
2. He did not check to verify that roles were held by the remote server, but he transferred all roles from the remote to the production server using ntdsutil. I would expect that if the role was not held by the remote, the transfer command would have
shown that fact.
3. He then tried to demote the remote server but had an error that it could not be demoted because "the active directory service is missing mandatory configuration information".
4. He forcefully demoted the remote server.
5. After rebooting the production server again performance was slightly better but still slow (and the rebood was still very slow).
6. After some research he removed the remote domain controller's meta data from the production server and then rebooted the production server again.
At that point reboot was fast (under 5 minutes) and the production system was working at normal speed again.
All of the above leads me to believe that somehow the FSMO roles got added to, or moved to the remote site when I used the IFM file to create the new domain controller. However nothing I have read says that this should happen. I hope someone
here can give me a better answer as to what caused the problem, as I do not wish to interrupt our production system like this again.
Thank you, Russ
PS: Sorry for the delay in getting back to this but some other priorities took me away from it for a week.
Russ

DCOM errors on site server when connecting to site systems in remote untrusted domains

When the site component manager and sms executive is trying to access site systems in remote domains in untrusted forest i got a lot of events in the system log with event id 10028:
"DCOM was unable to communicate with the computer <computername> using any of the configured protocols; requested by PID 32a4 (D:\Program Files\Microsoft Configuration Manager\bin\x64\sitecomp.exe)."
"DCOM was unable to communicate with the computer <computername> using any of the configured protocols; requested by PID 2990 (D:\Program Files\Microsoft Configuration Manager\bin\x64\smsexec.exe)."
I have checked the sitecomp.log and smsexec.log for errors, but I can´t find anything wrong and everything seems to be working fine. I am using Site system installation account to connect to the site systems. Is this normal behavior?
Thanks
Markus Lindgren
kungcocos

Here's the answer from SA support:
Reason behind the errors in DCOM :The SCCM 2012 Server will always connect to all the MPs with the system account, and will use the console provided remote forest credentials only to run the MP
management.
Whenever we attempt a connection SCCM build a list of available accounts (Site System Installation Account
+ Machine Account) and loop through them attempting each option in turn. The machine account is always (as far as I know) a member of this list – if you don’t specify
a site system connection account then it will never connect if the machine account fails – but that’s not the same as saying specifying a site system connection account means we won’t try the machine account first.
So this is something "by design" and shouldn't cause any troubles to the SCCM systems.

Odbc.ini entry on local unix server to connect to a T10 on remote server

I am trying to setup an entry in the ODBC.INI file on local unix server that has T10 client installed. I want to connect to a T10 datastore on a different server using this ODBC entry (client/server connection for a Informatica tool)
Could some one tell me how this ODBC.INI entry should look like on my local server.

Say your remote dsn is called 'mydsn' and your remote server called 'TTserver' then the entry on the client machine would be:
[mydsn_cs]
TTC_SERVER_DSN=mydsn
TTC_SERVER=myserver
You would then also need an entry in the sys.ttconnect.ini file as follows:
[myserver]
Network_Address=TTserver
TCP_PORT=<port of server daemon on server>
The port of the server daemon is typicaly 2 more than the port of the main daemon - you can check this by typing 'ttStatus' and looking for the line starting with 'TimesTen server pid'.
Then test your connection with 'ttIsqlCS mydsn_cs'.
*Note: the dsn entry for 'mydsn' on the server needs to be in the sys.odbc.ini file. It can not be in a private .odbc.ini file.

Lost window, using published application on server 2012, when access it via web remote.

Hi,
We use an edi software installed on a Server 2012.
When we use this software accessing the server by Remote Desktop, everything works normal.
When we use the same software accessing the server by web access, (...softname/RDWeb/Feed/webfeed.aspx) where was published this soft application, we lost some windows after different actions.
For example if I do a modification for a value in one specific window, after I click save, that window disappear but can appear again only if I click again anywhere on my desktop.
In other words that window lost the focus and probably is still open under another window. Clicking again anywhere, will reactivate it and that window appear again.
Can you please help me to find a solution to this problem?
Thank You!

Hi,
For example if I do a modification for a value in one specific window, after I click save, that window disappear but can appear again only if I click again anywhere on my desktop.
Would you please tell us which window and what has been modified specifically?
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Windows 2008 Server crashed - How to find location of remote shared files that they used to access on remote web app?

We have a client that was running windows 2008 server. A previous IT person had setup their system, so we were walking into a situation where there were many unknowns. Server was mainly handling emails only, and we were able to get their exchange
database off and export PSTs to hosted exchange via microsoft.
Everything went fine with that, however one user said that he used to access files on the server via the remote web app as he described. He would go to the following url:
https://mail.theirdomain.com/remote/menu.aspx#
and he would use his login and then he would see several links to folders. He could then click on those and see his desired files.
We were able to get the server booted again, however we could not find any of the files he described on it at all, leaving me to suspect that perhaps this remote link was accessing another PC.
We have the old server up and running, however the link above is no longer active because we have pointed the domain to the new hosted exchange server. As I am still learning and my boss wanted me to research this on my own and figure out how to find
out where these files are located. Any advice would be greatly appreciated.
Just as a note I did try access mail.localhost.com/remote/menu.aspx# on the server but this did not work. Is there any way in the IIS 7 management console to figure out where this was pointing to?

I figured it out - The server was using sharepoint to host these files. I browsed localhost:987 and opened the sharepoint site locally on the server. They had several documents to be exported, however when clicking on Open in Explorer it was
giving an error that local client was not configured. I installed Desktop Experience and after that was able to open it in Windows Explorer and copy all files off.

Installation server 8.1.0.124 failure on remote installation

Similar Messages

Maybe you are looking for