Installed firmware update, and can no longer connect to AE base station

I have an Airport Express base station and would like to connect to an existing wireless network.
I first attempted to change the AE base station to "client mode" in Admin Utility, but this option was grayed out.
I downloaded and successfully installed the latest version of the firmware, and I also did a factory restart. Now, Admin Utility recognizes the base station, but when I click "configure" and enter my password at the prompt, I get the following message:
"An error occurred while trying to access the base station. Make sure your network connection Is valid and try again. Error code -4"
Any suggestions would be greatly appreciated!

Try connecting your computer/laptop directly to the base station with an ethernet cable to one of the external ports and install your network settings. If it finds it there, it will find it after you've reloaded your network info to the base via the Apple Utility. Hopefully when you disconnect afterward, all will be fine. Be sure not to select "closed" network although Macs will login with no prolem, PC's have trouble doing so even with the network data stored in the internet settings.
Good luck!

Similar Messages

I recently installed itunes update and can no longer connect to network nor internet

I recently (sept 2013) installed itunes update and can no longer connect to a network nor internet wired /wireless. I know it is not the gateway as other devices work. Please help. I am not very knowledgable so exact instructions will be most helpful.

Try connecting your computer/laptop directly to the base station with an ethernet cable to one of the external ports and install your network settings. If it finds it there, it will find it after you've reloaded your network info to the base via the Apple Utility. Hopefully when you disconnect afterward, all will be fine. Be sure not to select "closed" network although Macs will login with no prolem, PC's have trouble doing so even with the network data stored in the internet settings.
Good luck!

I have a uk iTunes account but have moved to the Netherlands and can no longer connect to the iStore from my iPad. Do I need to update my iTunes account to a Dutch one?

I have a uk iTunes account but have moved to the Netherlands and can no longer connect or make purchases. Do I need to change my account to a Dutch one?

You can't transfer any content from one account to another account (nor can accounts be merged) - all content will remain tied to the account that downloaded it.
Do you not have copies of all of your downloads e.g. on your computer or backup of your downloads/library ? Whilst you are in Australia you can't redownload your UK purchases (you have to be in a country to use its store), if you have them on your computer's iTunes library then you should be able to stream them from it to your Apple TV

My Mac is producing gray screen at startup and crashes. I'm afraid that everything explode and disappear, and can no longer connect and work with my Mac. Can anyone help ?? Thank you.

My Mac is producing gray screen at startup and crashes. I'm afraid that everything explode and disappear, and can no longer connect and work with my Mac. Can anyone help ??
Thank you.
Problem description:
gray screen at startup and crashes
EtreCheck version: 2.1.1 (104)
Report generated 6 de dezembro de 2014 13:29:43 BRST
Hardware Information: ℹ️
MacBook Pro (15-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2.2 GHz Intel Core i7 CPU: 4-core
4 GB RAM
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6750M - VRAM: 1024 MB
Color LCD 1440 x 900
Intel HD Graphics 3000 - VRAM: 384 MB
System Software: ℹ️
Mac OS X 10.6.8 (10K549) - Uptime: 0:31:56
Disk Information: ℹ️
TOSHIBA MK7559GSXF disk0 : (698,64 GB)
S.M.A.R.T. Status: Verified
- (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 749.81 GB (378.70 GB free)
MATSHITADVD-R   UJ-898
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple, Inc. MacBook Pro
Problem System Launch Daemons: ℹ️
[not loaded] org.samba.winbindd.plist [Support]
Launch Agents: ℹ️
[running] com.babylon.activation.plist [Support]
[loaded] com.divx.dms.agent.plist [Support]
[loaded] com.divx.update.agent.plist [Support]
[loaded] com.hp.help.tocgenerator.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.facebook.videochat.[redacted].plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[running] com.skype.c2c_service.plist [Support]
User Login Items: ℹ️
iTunesHelper UNKNOWNHidden (missing value)
FaceboxPro Aplicativo (/Applications/FaceboxPro.app)
Safari Aplicativo (/Applications/Safari.app)
Octoshape Aplicativo (/Users/[redacted]/Library/Octoshape/Octoshape.app)
uTorrent UNKNOWN (missing value)
Dropbox Aplicativo (/Applications/Dropbox.app)
Inkscape UNKNOWN (missing value)
RealPlayer Downloader Agent Aplicativo (/Users/[redacted]/Library/Application Support/RealNetworks/RealPlayer Downloader Agent.app)
HP Product Research Aplicativo (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
Internet Plug-ins: ℹ️
OVSHelper: Version: 1.1 [Support]
Google Earth Web Plug-in: Version: 7.1 [Support]
Flip4Mac WMV Plugin: Version: 2.4.4.2 [Support]
RealPlayer Plugin: Version: Unknown [Support]
AdobePDFViewerNPAPI: Version: 10.1.12 [Support]
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
DivX Web Player: Version: 3.1.1.9 - SDK 10.6 [Support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.239 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.6.6
iPhotoPhotocast: Version: 7.0 - SDK 10.7
SharePointBrowserPlugin: Version: 14.1.2 [Support]
AdobePDFViewer: Version: 10.1.12 [Support]
JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
User internet Plug-ins: ℹ️
npsf_uni: Version: sf 3.3.2.1 [Support]
OctoshapeWeb: Version: 1.0 - SDK 10.8 [Support]
Safari Extensions: ℹ️
Searchme Adware! [Remove]
Skype Click to Call
iSkyDeluxe
TED HTML5 video playe
Audio Plug-ins: ℹ️
iSightAudio: Version: 7.6.6
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Flip4Mac WMV [Support]
Skype Click to Call [Support]
Tuxera NTFS [Support]
Time Machine: ℹ️
Time Machine information requires OS X 10.7 "Lion" or later.
Top Processes by CPU: ℹ️
      5% WindowServer
      4% DivXMediaServer
      1% fontd
      0% RealPlayer Downloader Agent
      0% WebProcess
Top Processes by Memory: ℹ️
296 MB WebProcess
202 MB FaceboxPro
185 MB Microsoft PowerPoint
163 MB Safari
137 MB Microsoft Word
Virtual Memory Information: ℹ️
843 MB Free RAM
1.76 GB Active RAM
706 MB Inactive RAM
978 MB Wired RAM
577 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 6, 2014, 12:58:24 PM Self test - passed
Dec 6, 2014, 12:23:11 PM Kernel_2014-12-06-122311_MacBook-Pro-de-...panic [Details]
Dec 6, 2014, 07:08:28 AM PluginProcess_2014-12-06-070828_MacBook-...crash
Dec 5, 2014, 05:24:39 PM WebProcess_2014-12-05-172439_MacBook-Pro...crash
Dec 5, 2014, 10:45:59 AM Kernel_2014-12-05-104559_MacBook-Pro-de-...panic [Details]
Dec 5, 2014, 10:18:14 AM Kernel_2014-12-05-101814_MacBook-Pro-de-...panic [Details]
Dec 3, 2014, 08:28:35 PM locationd_2014-12-03-202835_localhost.crash
Dec 5, 2014, 10:25:44 AM Kernel_2014-12-05-102544_MacBook-Pro-de-...panic [Details]

Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup Issues - Resolve
Startup Issues - Resolve (2)

I just upgraded to Yosemite and can no longer connect to the WIFI any suggestions

I Just up upgraded to Yosemite and can no longer connect to internet - any ideas?

I have the same problem after loading OS X 10.10 Yosemite on my MacBook Pro (Late 2008). Wi-Fi (Time Capsule) connects OK, then I open Safari and it waits for a minute and then gives me a message that it can't load the page because I'm not connected to the Internet. The Wi-Fi is fine. When I run the network analysis, it shows that everything is fine up to the Internet; the dots are red after that. I have another MacBook Pro (Retina, Mid 2012) and it loaded and runs with no known problems (so far). I am writing this message on the Late 2008 MacBook Pro, so you can see that there is no problem with the Internet connection. It is a Yosemite problem. My iPhone and newer MacBook Pro connect with no problem. I loaded Yosemite TWICE, then ran the Disk Utility and fixed some disk permissions but there were no other problems identified. Restarting after reloading Yosemite and the same problem is there. Restarted after running the disk utility and fixing disk permissions and it still can't connect to the Internet. Same problem. Does anyone have an idea how this might be fixed? What's going on? Thanks for your help.
Update: Air Drop also doesn't work. Thanks.

I am using Dreamweaver CS4 and can no longer connect to Device Central - Can you help me with this?

I am using Dreamweaver CS4 and can no longer connect to Device Central - Can you help me with this?

Device Central was discontinued April 23, 2012.
http://www.adobe.com/products/devicecentral.html
And replaced with Adobe Edge Inspect CC (for Cloud subscribers)
http://html.adobe.com/edge/inspect/
Nancy O.

HT1369 with the last update I can not longer connect my iphones to iTunes - Is there an update to fix this?

with the last update I can not longer connect my iphones to iTunes - Is there an update to fix this?

Hello wendellfromva,
The following article provides tips that can help get your iPhone to reappear in iTunes.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen

Just updated KIES and can no longer connect my laptop and S4?

I've been using KIES for a year. Was just prompted to update it. Did so (to version 2.6.0.13091.9) and now I can no longer connect my laptop and Galaxy S4.
I'm getting the following message which is, of course, nearly worthless:
     Reconnect the device in Samsung Kies (PC Studio) mode.
     Current connection mode not supported by Kies.
     Check the USB settings.
     (Settings -> Applications -> Development -> USB debugging (x))
1) "PC Studio" has no actual meaning; after searching online I found what they're trying to tell me is the phone must be in MTP mode rather than USB debugging mode.
2) The Settings path above is wrong; I DID manage to find the proper path to turn off debugging & switch to MTP, but that doesn't help.
3) uninstalled & reinstalled KIES; no help
Any ideas?
I know 1000's of other people are having this problem, so I'm a bit surprised VZ doesn't have a ready answer here.

    Hey there mjr123,
I am sorry to hear that you are having issues with the Samsung Kies software. This is actually a third party application offered through Samsung, so I would recommend reaching out to Samsung's support team for the best assistance.
NicholasB_VZW
Follow us on Twitter @VZWSupport

TS2756 since ios6 update I can no longer connect my ipad to my iphone hotspot

I updated both my iphone 4 and ipad 3 to ios6. Since then I can no longer connect my ipad to my iphone personal hotspot. I did the reset network on both devices. It did work for one session but then I could never get it to work again. Has anyone found a fix for this? Should I call my carrier?

Follow the troubleshooting steps outlined in the troubleshooting document from which you posted your question.

Disconnect Device through Hotspot and can no longer connect

I recently disconnected a Windows 7 device through the "Connected Devices" option on the Verizon Hotspot. After disconnecting that Windows 7 device I am no longer able to connect through the Verizon Hotspot. I have removed and added back the hotspot profile in Windows 7 and can still not connect. I can still however, connect to other devices on the Verizon hotspot. I receive a simple error message in Windows 7 to verify the encryption settings even those encryption settings are properly set to WPA2. It appears that both devices appear to be out of synch. Has anyone experienced this with other Verizon 4G LTE hotspots? I generally just disconnect the device or turn off the hotspot when disconnecting however, I did not see any hard whatsoever in disconnecting the device through the hotspot "Connected Devices" option. Any help would be greatly appreciated as I need to get one of my business laptops that use Windows 7 back online..

If it's encryption Windows 7 is speaking of, make sure in the wireless adapter settings configuration that not only is on the correct WPA2 as you stated but the encryption matches, such as AES or TKIP.
Otherwise, removing the connection from the Preferred Wireless Networks list and resetting the device should allow a fresh new start.

Installed Leopard and can no longer connect to my shared hard drive

I had a sweet set up with a Drobo (fancy external hard drive) connected to my Airport Extreme base station. Before I upgraded to Leopard, my MacBook Pro would discover the Drobo disk and run scheduled backups without me having to do anything.
Since I installed Leopard, I can see the Drobo disk in the Finder under SHARED > Airport but I cannot access it. It won't accept my password to connect to it. What's really weird/dumb is that I can use Airport Utility to reset the password and change whatever settings I like... but when it comes to actually using the disk, I'm locked out.
Anyone know what's going on?

Podcast Update:
Jason O’Grady on today’s PowerPage podcast said that in the beta builds of leopard time machine supported airport extreme’s airport disk feature. They only dropped it in the release version of leopard. He’s confident this functionality will return.
But on today’s MacBreak Weekly podcast, Leo Laporte said as much as he loves his drobo it’s LOUD when it’s working. I wonder if one of his drives is failing. He also said he prefers a backup program called ChronoSync. I’ve never used it.

HT6065 I installed this update and I no longer can access my AirPort Time Capsule via Finder

When I click on 'AirPort Time Capsule' in Finder, Finder crashes.
I have hundreds of films on a USB drive connected to my AirPort Time Capsule and I no longer can access them on my home network....
Luckily AirPort Utiity still works and I could restart Capsule but no improvement.
Likewise Time Machine still works...
(MacBook Air running Mavericks)

Hi!
You will need to get your Sync Key from your Android Device and then follow this simple steps:
https://support.mozilla.com/en-US/kb/How%20to%20sync%20Firefox%20settings%20between%20computers#w_what-if-im-not-near-my-first-computer
In order to get your Sync Key from your Android Device you will need this add-on:
https://addons.mozilla.org/en-US/mobile/addon/aboutsynckey/
This should work. Let me know if you need further help.

Just did a Firmware Update and can't receive or send mail

I just did a firmware update as recommended by Apple:
2008-04-13 18:30:24 -0400: Installed "Aluminum Keyboard Firmware Update" (1.0)
2008-04-13 18:30:32 -0400: Installed "iMac EFI Firmware Update" (1.3)
I had restarted my iMac and noticed that my Mail 3.2 will no longer connect to my mail servers and send or receive mail.
My internet connection is fine when using my browser. I closed and restarted "Mail" and this didn't help and even restarted my computer but that didn't help either.
Anyone else that just did this update have a similar issue? Anyone know of a fix? I don't think I can undo the Firmware update now, so what do I do?
Thanks

Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
Delete and re-add the email accounts.

Installed SAP Master and can no longer log into old xIEP portal

Hello there,
I am very new to SAP so please bear with me. We were experiencing J2EE Engine connection errors along with no connection to our SLD with our xIEP portal, so I tried to verify that all of our parameters were correct. I did this by checking prior documentation and opened up the SAP Master Installation and began to verify the settings for the current installation of NetWeaver 2004s that we have.
However at the end of the installation, I clicked on start and it began to install SAP Master. Now when we log into our xIEP portal, we can no longer log in with our user id and password, but are able to log in as Administrator.
I am afraid that when I installed the SAP Master, this might have replaced the old NetWeaver that our portal was running off of. Please tell me that this isn't true, and that somehow I can get access to our old portal. Any suggestions would be greatly appreciated. Thank you.

You might consider rebuilding the ECP virtual directory:
http://technet.microsoft.com/en-us/library/ff629372.aspx
With the EMS, procedure should be the same for Exchange 2010 and 2013.
Since you state that everything else is working, other virtual directories included (OWA for ex.), it's most likely something with the ECP virtual directory.
But even before that, I would try to look at the (rather cryptic) IIS logs and see if you cannot find any useful information there:
http://social.technet.microsoft.com/Forums/exchange/en-US/935eeb5b-d996-4933-9cbd-0347ebad801d/how-can-i-view-exchange-iis-logs?forum=exchange2010
There were some ideas in this thread but i think you may have seen it already?
http://social.technet.microsoft.com/Forums/exchange/en-US/1736b5ab-e69b-4637-aa59-f2d9bd54ead2/unable-to-access-exchange-2013-eacecp-webpage?forum=exchangesvrdeploy
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Updated and can no longer record video

I updated to iOS4 on my 3Gs and I can no longer record video, the option to switch to video is no longer there. Is anyone else having this problem?

Thanks for the suggestion; unfortunately, such attempts are unsuccessful. In fact, I've been experiencing this bug for quite a while (as a developer), despite several restores. From my research, there are serious issues with iOS 4.0 and the iPhone Camera app. I've submitted a bug report for this. We'll see what comes of that.

Installed firmware update, and can no longer connect to AE base station

Similar Messages

Maybe you are looking for