Installed New-ExchangeCertificate, OWA no longer functions.

Hello,
A colleague of mine installed a new certificate overnight that they weren't supposed to on our CAS server. This unfortunately broke access to OWA. I had him remove the newly installed certificate and our original certs remain however we are unable
to access OWA. Restarting services did not resolve this issue. Does anyone have any advice? Thank you for your time.

Hi,
If the new certificate is removed, please assign the IIS service back to your original certificate and restart IIS service to have a try.
Regards,
Winnie Liang
TechNet Community Support

Similar Messages

Installed new itunes and no longer have any music files

when I installed the new itunes version, everything went well - no error messages and itunes definetly looks different....
but now I have no music files in my itunes when I open itunes....is there a step I missed?

Your iPod can only be synced with one computer at a time. If you try to sync it with a new computer/iTunes library, it will replace the contents of the iPod with whatever is in the new library. You should probably disable the autosync functionality first by going to Edit -> Preferences, clicking the Devices tab, and enabling the prevent iPods,iPhones, and iPads from automatically syncing option.
Before doing anything else, authorize the new computer with your iTunes Account. In iTunes, choose Store -> Authorize This Computer and enter in the correct credentials. Either copy a backup file from your old computer to your new one or create a new backup of your iPod in iTunes before letting it sync.
Then right->click on your iPod Touch from under the Devices section in the left hand pane of iTunes and choose Backup. You might also want to take a look at this article to see what it all included in the backup.
iOS: How to back up
Now onto synced content such as music, videos, photos, etc. For iTunes purchases you can copy them back into iTunes by choosing File -> Transfer Purchases. For all other nonpurchased iTunes content, see this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
Recovering your iTunes library from your iPod or iOS device
Once the backup has been made and all other synced content such as music, videos, and photos are back in your iTunes library, restore your iPod from that backup you made earlier. Here is more on backing up and restoring your iPod.
iTunes: Backing up, updating, and restoring iOS software
If you do happen to lose any purchased content, you can always redownload it from the iTunes Store again at no cost via iCloud. See this article for information.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
B-rock

HT1923 got notification that new Itunes version is available, once i installed it I'm no longer able to open Itunes, I get the error message, Not installed properly. Reinstall itunes. Error 7(Windows error127),

got notification that new Itunes version is available, once i installed it I'm no longer able to open Itunes, I get the error message, Not installed properly. Reinstall itunes. Error 7(Windows error127), I tried repairing itunes, Apple Aplication support, apple mobile device support, bonjour and I even uninstalled and reinstalled Itunes and still problem exist, any solution?
I have windows 8

I got this message today too. I understand that my music is stored on my computer, however I want to be certain that if I re-install iTunes, it won't erase my library....playlists, playcounts, checked songs, etc.

After installing Mavericks I can no longer save a new word document or pdf by typing the name of the destination folder in the Finder window. The save button greys out. Solutions anyone?

After installing Mavericks I can no longer save a new word document or pdf by typing the name of the destination folder in the Finder window. The save button greys out. Solutions anyone?

Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder—not just its contents—to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window.
This action will delete any custom Mail stationery that you have created. If you want to preserve it, ask for instructions.
If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

The desktop on which I had Lightroom and PhotoshopCC installed failed and I no longer have access to it. How do I deactivate the software on those machines so that I can reinstall it on my new Mac?

Question: The desktop on which I had Lightroom and PhotoshopCC installed failed and I no longer have access to it. How do I deactivate the software on those machines so that I can reinstall it on my new Mac?

Absolutely - but I had no idea there were two versions. When I got my new laptop I just went to the Adobe site to download and install LR5. It never asked if I had a license; it just directed me to install CC to start a trial which I thought I could license after downloading. Several sessions and many hours of looking through the forums and Google for an answer I never ran across anything that made this distinction. I still haven't found a path from www.adobe.com that would get me to the standalone download page (it's probably there, wasn't obvious to me) and looking at the download page it doesn't make any CC/standalone distinction.
There are many places I could have gotten a hint - for instance the license could be tagged "stand alone edition", the CC-version could recognize the stand-alone key and either accept it or produce a more meaningful error message, or the download site or the CC app could ask if I had previously purchased a key, etc.
It was my error to assume this was a deactivation problem, but it looked the same as a previous deactivation problem with Photoshop.
In any event, thank you for your help.

HT5622 Actually um trying to update new iOS 7 for my iphone 4 but when i press the button to install new software suddenly it appears why " iOs 7 failed verification because you are no longer connected to the internet " even my phone is already connected

hie there Actually um trying to update new iOS 7 for my iphone 4 but when i press the button to install new software suddenly it appears why " iOs 7 failed verification because you are no longer connected to the internet " even my phone is already connected to net

I tried powering down and re-starting the iPhone (as suggested at http://support.apple.com/kb/TS1275). This seems to have cleared the "...not connected to the Internet" problem, and iOS 6.1 is now in the process of downloading.
Thanks very much for your feedback.

Mac laptop (OS X) trackpad functions don't work since I installed new firefox (but works on Safari)

My trackpad functions such as using 2 fingers to enlarge or decrease size of page do not work since i installed the upgraded firefox on my Mac laptop (OS X - Ver 10.5.8). Installed new version on May 5, 2011. Please help!

You don't have to disable any addons or extentions!!!You guys are not going to believe this I figured out the problem it's really dumb...ok here goes the attachment uploader loads seperate so I got to thinking it's a popup so I went to options content and under block pop ups there is an option exceptions click on that and in the box type firefox.com and hit allow pow its fixed!!!!! :-)

I went on Itunes to install new software and backup. I has been running all night and still saying preparing Iphone for restore. How long is this suppose to take?

I went on Itunes to install new software and backup. It has been running all night and still saying preparing Iphone for restore. How long is this suppose to take?

Preparing your iPhone for restore its supposed to be about 1-2 minutes! Do you see any errors the time you plug in the wire from your iPhone to iTunes?

Install new font on OWA

Our client has a request: they need a specific collection of fonts (Myriad Pro) to match their policy. So I tried to install Myriad Pro fonts from here: http://www.cufonfonts.com/en/font/492/myriad-pro, and install them on Exchange Server (our client has
only one mail server). But when users access mail via OWA, they don't see new fonts, just the default ones.
Is Exchange Server 2013 allow us to install new fonts for OWA?
Thanks for your kindly help.
Tu9a2

Hi
There is the ability to create a new theme in OWA 2013 - I haven't tried this myself yet but the instructions can be found here:
http://technet.microsoft.com/en-us/library/bb201700(v=exchg.150).aspx
Cheers, Steve
I've already tried that, and it's nothing related to add new fonts. The only thing that OWA allow us to modify is the color of the fonts, that's all.
So far I can't find any solution for that specific issue. So I've marked Terence Yu post as an answer. I think at the moment we have to accept that.
Thank you all!

Must Uninstall Non Functioning InDesign CS5.5 to Install new Version

Win 7
InDesign CS5.5 licensed to former employee, it no loger boots. I need to remove the old program to instal new CS6.
Any hints? It does not show up in the Win Programs and Features.
Thank you,
Shawn

run the cleaner (http://www.adobe.com/support/contact/cscleanertool.html) then delete as much as you can find:

New LUN Takes A long Time To Format and Errors Out

Good afternoon,<o:p></o:p>
I have a Hyper-V Cluster composed of 4 nodes and these nodes are able to access multiple CSVs (14 in total). I recently requested a new LUN (LUN 15)to be provisioned
to my Hyper-V cluster in the size of 500GB. Here is my problem:<o:p></o:p>
1. Formatting of a 500GB LUN (with quick format selected) should not take more than a few seconds. Instead, the quick format takes about 2hrs if not longer. I have actually
seen it go for half the day.<o:p></o:p>
2. Once the formatting has completed (no errors), taking the formatted LUN offline freezes the Computer Management screen and shows the status (Not Responding). This
will take place for 30 minutes or less and show that the LUN has been taken offline.<o:p></o:p>
3. In the Failover Cluster Manager, detecting the disks takes about 15 minutes. Once the available LUNs have been detected I can add the 500GB LUN to the Disks screen
without any problems.<o:p></o:p>
4. While in the Disks screen, adding the LUN to the Clustered Shared Volumes takes about 5 minutes (too long).<o:p></o:p>
Already seeing that there is a problem, I went ahead and used the Hyper-V Manager to create a 200GB vhd on the new LUN which has been added to the CSV. The bar indicating
the progress of the vhd creation does not display any progress (no green progress bar appears, not even a tiny bit of it) and after 3 hours (more or less) I receive an error, stating that the creation of the vhd failed.
<o:p>NOTE: The vhd shows up in Volume 9 (LUN 15) but I can only bet that it will not work, plus I would not want to work with a vhd file which failed during the
creation process.</o:p>
<o:p>Long story short, I repeated the above steps to see if that was a temporary problem, but it is not. The same problem occurs no matter which Hyper-V cluster
node the operations are performed on. I would like to add, that I tested the creation of a vhd on an already configured LUN and the creation was completed successfully, and within a n expected time frame.</o:p>
NOTE: When LUN 15 errors out, it's status shows "Failed" in the Failover Cluster Manager. This in turn, causes the re-scanning of available disks to take forever (in Computer Management) and it keeps searching. Pretty
much, the fail of one LUN affects the entire functionality of the entire Hyper-V Cluster.
Errors Listed In Event Details For LUN 15:
1. Cluster Shared Volume 'Volume9' ('Cluster Disk 5') is no longer accessible from this cluster node because of error 'ERROR_TIMEOUT(1460)'. Please troubleshoot this node's connectivity to the storage device and
network connectivity.
Event ID: 5142; Source: Microsoft-Windows Failover Clustering;Task Category: Cluster Shared Volume
2. Cluster Shared Volume 'Volume9' ('Cluster Disk 5') is no longer available on this node because of 'STATUS_IO_TIMEOUT(c00000b5)'. All I/O will temporarily be queued until a path to the volume is reestablished.
Event ID: 5120; Source: Microsoft-Windows Failover Clustering;Task Category: Cluster Shared Volume
3.Cluster resource 'Cluster Disk 5' of type 'Physical Disk' in clustered role '4530acc9-8552-4696-b6c3-636ff8d58c46' failed.
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. Check the resource and group state using Failover
Cluster Manager or the Get-ClusterResource Windows PowerShell cmdlet.
Event ID: 1069; Source: Microsoft-Windows Failover Clustering;Task Category: Resource Control Manager
4.
Cluster resource 'Cluster Disk 5' (resource type 'Physical Disk', DLL 'clusres.dll') did not respond to a request in a timely fashion. Cluster health detection will attempt to automatically recover by terminating the Resource Hosting Subsystem (RHS)
process running this resource. This may affect other resources hosted in the same RHS process. The resources will then be restarted.
The suspect resource 'Cluster Disk 5' will be marked to run in an isolated RHS process to avoid impacting multiple resources in the event that this resource failure occurs again. Please ensure services, applications, or underlying infrastructure
(such as storage or networking) associated with the suspect resource is functioning properly.
Event ID: 1230; Source: Microsoft-Windows FailoverClustering;Task Category: Resource Control Manager
Any and all help will be appreciated!

Hi AquilaXXIII,
What server edition you are using? If you are using 2012r2 as cluster node, please install Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
update first,
Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
http://social.technet.microsoft.com/Forums/en-US/f9c1a5f7-4fcf-409a-8d7e-388b85512bfe/new-lun-takes-a-long-time-to-format-and-errors-out?forum=winserv
Before you install the new shared storage please first validation this storage first, you can refer the following KB to validation the new LUN.
Understanding Cluster Validation Tests: Storage
http://technet.microsoft.com/en-us/library/cc771259.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Upgrade / install new windows

is there anyway i can install new windows or upgrade windows on my palm treo 750 through my computer and data cable..
Post relates to: Treo 750 (AT&T)

http://www.palm.com/us/support/downloads/treo750update/att.html
From the above link:
"As of November 1, 2008, the promotional update to Windows Mobile 6 for AT&T Treo 750 devices is no longer available. The update has been available since December 4, 2007 when customers were first advised to take advantage of the download.The update was optional; Treo 750 devices running Windows Mobile 5 will continue to work and function as before. Treo 750 devices began shipping with Windows Mobile 6 pre-installed after November 30, 2007."
Post relates to: Centro (Sprint)

Can I install new/different software in home hub 2...

Hi all,
I want to remove/unassign ports that have been associated with games and application previously used, but unfortunately my home hub 2 (Software version 4.7.5.1.83.3.37 (Type B)) does not provide this function!
Apparently it is a bug in the Type B where once a port is assigned, it can no longer be used / assigned to a new/different application!!! Stooopid!
Does anyone no if it is possible to install new software that would provide this functionality? maybe home hub 3 software? if this is even possible... Or, (this is probably the wrong forum to be posting this in lolol) is there a way to hack the hub 2 to run different software all together, Linksys maybe?
It would probably just be easier to go out and buy a Linksys router lol.. but I like to break things!

I doubt there are any custom firmwares for the homehub. As I've explained it's a consumer grade device which isn't designed to be buggered about with. Also, unless the hardware was identical to another device you can't simply load linksys firmware on to a non linksys device, or netgear firmware on to a non netgear device and so on as they would simply not work.
Grab a Netgear DGN2200 from your local currys/PCWorld or your favourite online retailer. Much less bother.

Trouble installing new updates, iTunes 8.0, java, security up 2008-006 ppc

it will not install any of the updates... iTunes 8 java update or the security i get a message about not having permission to write to folders when i have full admin privileges
_I get an error message:_
Make sure you have permission to write to /Library/Caches/com.apple.SoftwareUpdate/content/downloads/01/22/061-4745/KYwQP nY2dPTsCtWk28ChF8MZgwqrh7L2gH, then try again.
Make sure you have permission to write to /Library/Caches/com.apple.SoftwareUpdate/content/downloads/14/31/061-4471/hqHbz HLQ9cN25y6cx9CsXYqHXnB5cKSL8j, then try again.
Make sure you have permission to write to /Library/Caches/com.apple.SoftwareUpdate/content/downloads/43/40/zz061-_5456/Nq JjWzGN2pqKPmntm7tGqHqdLfZmkV88KQ, then try again._
I have looked for these folders and have got into library,cashes... until i get to the folder after downloads and there isn't one called 01, 14 or 43. I am confused as to what to do next??

Do not make your Mac bite off more than it can chew: do one update at a time. Some general guidelines on updating:
There are no guarantees, but following this procedure when installing updates and upgrades on your Mac, or even re-installing them, will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
The 10.4.11 Combo Updater for PPC Macs is here: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eppc.html
And for Intel Macs: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eintel.html
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
More information on using Software Updater here:
http://support.apple.com/kb/HT1338
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

Volume keys no longer functional?

the volume keys quit working on my wired aluminum keyboard this morning.
nothing new, just stopped wrking. other function keys seem to still be working.
tested on 10.7 and 10.8.
tried installing keymap to see if the keys could be tricked into returning, but sadly, no. volume not working with the keyboard any longer.
this is a wired keyboard. F11 (volume down) now does some thing where it makes stuff on screen slightly larger to fill the screen.
I am suddenly surprised how often i use volume keys now that they do not work.

thanks, checked every possible combination to restore the volume keys using the keymap4macbook preference pane (what a dumb name, but it is free). working correctly again.

Installed New-ExchangeCertificate, OWA no longer functions.

Similar Messages

Maybe you are looking for