Installing ios 8.13 camera stopped working

I have upgraded to ios 8.13 then the camera stopped working.  Contacting apple support and asked for 210£ for repair.  I am so disappointed, it was working fine until i install the updates.  I hope they may help me to resold the issue.  my case id is 741072733

Contact Apple Phone support and let them know - there is definitely a problem with the Wifi dropping after the 8.2 update.  I have 3 different Wifi signals and 6 different iOS devices.  The ONLY one having the wifi issue is the 8.2 iOS!!!   I was told Apple support doesn't have any record of there being a Wifi issue with 8.2iOS AND that the technician I spoke to had not ever talked to a person having wifi issues with iOS8.2......really?!?   Well IF you are having a problem, call them and let them know.  Because there are definitely wifi issues with 8.2.  Dropping, not allowing connections, etc

Similar Messages

  • After installing ios 5, home sharing stopped working with iPad 2

    After I've installed iOS 5, Home sharing stopped playing on my iPad 2.
    I can SEE the content but the movies app simply hangs when I try playing it.
    I can still play the content on an iPad 1 though..
    Has anyone encountered something like that before?
    P.S.
    Using iTunes 10.5 on a PC running windows 7

    After installling iOS5 the Videos App on my iPad2 takes forever to start films and TV shows from home sharing, if at all. I get a black screen after starting the film which can last between 10 seconds and a few minutes.
    I've also noticed that I can't get the status of the film (volume, time etc.) to show when tapping the screen.
    On top of all that, after having solved the issue with the TV shows being doubled and tripled up, I've noticed that the covers for movies are often on the wrong film.
    Help!! Please!!

  • My iPod touch's(4th gen, iOs 5) front camera stopped working. Why? And how can I fix it?

    I can't use it on the regular camera, CamWow, instagram, twitter or anything else that involves a camera. And it's only the front camera. I can use the back camera on instagram. Anyway, all of my apps/cameras are all on the front camera and the little button to change it from front to back isn't on it. So I can't use my back camera either. It just randomly stopped working on friday and I don't know why. I've tried turning my iPod on and off but that doesn't work. So please help?

    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • TS3274 After installing iOS 7 camera stopped working normally. I can't take pictures with the back camera only the front camera. All was good before the update. Please fix this bug.

    After installing iOS 7 camera stopped working normally. I can't take pictures with the back camera only the front camera. All was good before the update. Please fix this bug.

    Hi Midnightbrat,
    Welcome to the Support Communities!
    The troubleshooting steps for the camera on the iPad are similar to the iPhone:  I've highlighted the pertinent steps below:
    Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Camera
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tapping Settings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Third-party cases can interfere with the autofocus/exposure feature and the flash; try removing the case if you have image-quality issues with photos.
    Try turning the iPad off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try switching between the front and the back cameras to verify if the issue persists on both.
    I hope this information helps ....
    Have a great day!
    - Judy

  • Front and back cameras stopped working after IOS 8 update

    My front and back cameras both stopped working after i updated my phone to the IOS 8 software. Does anyone know why this would happen or any way of fixing it?

    Hi VictoriaViking,
    Not sure why your cameras stopped working with the update, or what the exact symptom is (black screen, no response...), but please check out the Camera troubleshooting section of this article.  (I know some don't apply to your issue.)
    iPhone: Hardware troubleshooting
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Take care,
    Nubz

  • HT201401 iPhone 4 camera stopped working after iOS 5.1.1

    After upgrading to iOS 5.1.1 my Rear camera stopped working
    Ok I've tried holding my finger on lense, reset, reload Still no use Took it to the store and they would not give me another one. Said its out of warranty they tried to reload it but still bad.  The wanted me to buy a new phone but their iOS has a bug my camera was working before the upgrade not after.

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset   >  http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring  >  http://support.apple.com/kb/HT1414
    If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • I have iPhone 5S after updating to IOS 7.1.1 my camera stopped working!!!!

    After updating to IPS 7.1.1 my camera stopped working, it's just a black screen.

    Hello Darth Evans,
    The troubleshooting steps below can help get your iPhone's camera working again.
    Camera isn't functioning or has undesired image quality
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • I have hp laptop dv9009us one day all the USB ports and webcam camera stopped working

    I have hp laptop dv9009us one day all the USB ports and webcam camera stopped working, I had windows XP and tried all solutions posted on online forums didn’t work, I upgraded to windows 7 and still not working, please note that the USB is detected in device manger and it says working properly but he webcam is not detected at all, also when I connect any device to USB it gives it power and I even can charge my cell phone but it doesn’t detect any device. Is there any genius out there that can help me?
    Also after I installed windows 7 I went o system information----software environment--- system drivers, and I found all USB drivers stopped by the way this was the case in windows XP as well
    usbccgp            Microsoft USB Generic Parent Driver   c:\windows\system32\drivers\usbccgp.sys         Kernel Driver   No            Manual Stopped           OK      Normal No       No
    usbcir   eHome Infrared Receiver (USBCIR)    c:\windows\system32\drivers\usbcir.sys Kernel Driver   No       Manual            Stopped           OK      Normal No       No
    usbehci Microsoft USB 2.0 Enhanced Host Controller Miniport Driver  c:\windows\system32\drivers\usbehci.sys            Kernel Driver   No       Manual Stopped           OK      Normal No       No
    usbfilter            AMD USB Filter Driver           c:\windows\system32\drivers\usbfilter.sys          Kernel Driver   No            Manual Stopped           OK      Normal No       No
    usbfltr   Razer Copperhead Driver         c:\windows\system32\drivers\copperhd.sys       Kernel Driver   No       Manual            Stopped           OK      Ignore  No       No
    usbhub Microsoft USB Standard Hub Driver    c:\windows\system32\drivers\usbhub.sys           Kernel Driver   No            Manual Stopped           OK      Normal No       No
    usbohci Microsoft USB Open Host Controller Miniport Driver  c:\windows\system32\drivers\usbohci.sys          Kernel Driver   No       Manual Stopped           OK      Normal No       No
    usbprint            Microsoft USB PRINTER Class           c:\windows\system32\drivers\usbprint.sys          Kernel Driver   No            Manual Stopped           OK      Normal No       No
    usbstor USB Mass Storage Driver        c:\windows\system32\drivers\usbstor.sys           Kernel Driver   No       Manual            Stopped           OK      Normal No       No
    usbuhci Microsoft USB Universal Host Controller Miniport Driver         c:\windows\system32\drivers\usbuhci.sys            Kernel Driver   No       Manual Stopped           OK      Normal No       No
    uwbusb            UWB Bus Control USB-Miniport Driver          c:\windows\system32\drivers\usbuwbmini.sys    Kernel Driver   No       Manual Stopped           OK      Normal No       No

    Did you ever get this resolved? I am having the same problem and have tried just about everything for my dv9000.

  • Yesterday I was able to take photos but around 9pm last night my rear camera stop working. I have reseted my phone and have also restored it and the camera still is not working. Also I have deleted all apps that can have access to the camera.

    Yesterday I was able to take photos but around 9pm last night my rear camera stop working. I have reseted my phone and have also restored it and the camera still is not working. Also I have deleted all apps that can have access to the camera and i have updated the new IOS.What else should I do ? Is this a hardware problem?

    Looks like a hardware issue that will have to be taken to a store

  • Photo Booth Camera stopped working

    When I installed the OS from the installs CD and launched the computer the photobooth built in camera turned on. As soon as I installed the files from choosing software update the camera stopped working. Is anyone else having this problem? If so how do I fix it?
    Seems like a driver or software conflict.
    Help????

    Found out that the problem occurrs when I hook my Canopus ADVC Analog to Digital box. For some reason it turns off my built in photobooth camera.

  • Camera stopped working in all applications on my new MacBook Air 10.8.5 Any help?

    My mid 2013 new MacBook Air camera stopped working in all applications, facetime, photobooth and skype. It says camera not found. Does anyone have a solution for this problem? Thanks!

    I have figured it out! You just have to install the new plug in to your macbook.
    Download  the AppleCamera.plugin provided.
    Click on go in the finder menu, select go to golder and paste in /Library/CoreMediaIO/Plug-Ins/DAL/ ,
    move that item, AppleCamera.plugin, to the trash
    Go to your downloads folder and copy the new AppleCamera.plugin, then paste it in the folder where the old one was.
    It works

  • Web cam stopped working with Windows 7 (but works fine with Ubuntu Live CD).

    Since two days my web cam stopped working. I am using Windows 7 64 bit and I have a Toshiba L505d S5992. It does not show in Device Manager and Windows Update doesn't recognize it, manually I can not install it, so my best guess it was broken.
    But then I tried the LiveDVD of Ubuntu 10.10 (64 bit) and it recognized immediately my web cam and the blue light came on. I have no clue what happened with Windows 7 but it's getting very frustrating.
    Any help would be very welcome at this point.

    Download the webcam application for your unit from this website.
    Uninstall it on the programs and features then installed the downloaded webcam application.
    Hope this will help you solve the issue.

  • After update to 11.2.202.228 mz USB 1.1 web cam stop working

    Hi,
    I have a camera from MediaTech company, it is written on it MT400 and serial number 2604050599. Before latest update it works, after install newest version of Flash Player it stop working. I tested it on http://testmycam.com as one of Adobe employee advices on forum but I have only black rectangle. On top left corner of this rectangle it is written Camera: USB PC Camera (SN9C 102) , FPS 10. I disabled Hardware acceleration but problem remains. 
    As I remember this camera is USB 1.1. Does new Flash Version support USB 1.1?
    I have checked on Device Manager on my Windows XP Home Edition 2002 Version with SP3 device driver version it is written:
    Manufacturer : Sonix
    Driver date: 2004-04-02 (I can't find newer drivers on web )
    Driver version: 4.6.6.1
    Is it bug or Flash Player stops supporting such devices?
    Regards

    I pressed Allow, before pressing Allow background was grey, after Allow
    it gets black. I see the name of this camera on list. I also try another
    camera from Logitech (I can't remember what name was it, but one of the
    newest) and everything works which suggest it is strictly related with
    this specific camera which I'm using.
    Regards
    W dniu 2012-03-31 08:39, Nodster pisze:
    >
          Re: After update to 11.2.202.228 mz USB 1.1 web cam stop working
    created by Nodster <http://forums.adobe.com/people/Nodster> in /Using
    Flash Player/ - View the full discussion
    <http://forums.adobe.com/message/4304094#4304094

  • Droid Ultra - Camera Stopped Working

    FYI.. Verizon Community.
    In case this happens to anyone else...
    After 24 hours of using the Droid ULTRA, the rear camera stopped working. I tried installing third party camera apps, doing a factory reset, nothing helped. Took it to my Verizon store and they confirmed the camera was no longer functional. Frustrating, since the camera worked on the first day I had the phone, and stopped for no reason by the second day!

    I hope you returned that particular unit.

  • My internal video camera stopped working on my envy 13 beats edition . Please Help.

    My internal video camera stopped working. It will not start and the light doesn;t come on anymore.  Please Help ASAP. Thank you.
    HP Envy 13 Beats Edition
    Windows 7 64-bit
    No changes made to system

    Hello Jamienix,
    We've an article that can help resolve most issues you may encounter with activating Messages.
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Cheers,
    Allen

Maybe you are looking for

  • Cursor and Update rows based on value/date

    SQL Server 2012 Microsoft SQL Server Management Studio 11.0.3128.0 Microsoft Analysis Services Client Tools 11.0.3128.0 Microsoft Data Access Components (MDAC) 6.1.7601.17514 Microsoft MSXML 3.0 4.0 5.0 6.0  Microsoft Internet Explorer 9.11.9600.1651

  • Journal Entry Problem

    Hello,            I am using SAP 2007 B  PL 15 and SAP user making a journal entry document but after 115 lines users unable to add new rows its happned more then one user Is there limitation for rows ? if not then how can i solve this issue please t

  • No billing document generated

    hi gurus, this is very urgent, in downpayment senario after sales order when i am going for order related billing it is stating that "document doesnot contains any item with open quantities" plese resolve this problem asap.

  • Selected text and coordinates

    Hi, I would know if with Acrobat sdk is possible to extract text from a user's selection on pdf so as copy this text in a editbox, with the coordinates of this selection too. I'm using delphi xe2 without update 3. Thanks.

  • Format date to 12-01-2009 instead of 01-DEC-09

    We need to format date to France Standards. The XML data is coming thur as dd-mm-yyyy, I have tried to use format-date with no success. Any guidance will be greatly appreciated