Installing Lenovo Windows 7 upgrade in a new hard disk

I have an U330 and I have received Lenovo Windows 7 upgrade disc. My pre-installed OS is Windows Vista.
I bought a new 500 Gb hard disk and I want to change my U330's hd for this new one AND also want to install Windows 7 in this new hard disk.
Question: is is possible to install windows 7 using Lenovo Windows 7 upgrade discs directly in this new hard disk?
Or do I need first to change the hard disk (and restore backup or restore factory default) and then upgrade to Windows 7?
Thanks in advance

I dont think it is possible,the upgrade disk will check for a eligible version of Windows vista before starting the installtion
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Similar Messages

How to install newest version of OSX on a new hard disk in macbook air

how to install newest version of OSX on a new hard disk in macbook air

Hold down command-R to boot into recovery mode and then install the OS. You need an Internet connection.

Upgrading To A New Hard Disk Migrating Data

Like many old MacBook users right about now, we're all thinking about upgrading our 60 or 80 GB OEM hard drives. Well, I went and did it and I have a few questions after-the-fact, not to mention documenting my experience.
First I chose the Seagate Momentus 160GB 7200.2 (ST9160823ASG). This replaces the OEM Seagate Momentus 80GB 5400.2 (ST98823AS). The reason for this is simple ... the OEM drive worked flawlessly and I was willing to spend a little extra to ensure continued performance. I also chose to bundle it with a CMS USB 2.0 external enclosure data transfer kit to re-use my old drive.
My first surprise was that the CMS auto-transfer software was Windows only, despite the fact they make a Macintosh back-up product. The second surprise was that there was no Apple auto-transfer options. I literally spent an hour searching the Apple website and built-in help and tutorials to find a way to do this. Thanks to all on this discussion website as I ended up choosing a third party "clone" software to copy my old drive.
Which brings me to my first question. Every-time I tried to use Disk Utility to make a disk image of my old disk, I got the response that the disk image failed because resources were in use. Is that normal? Is there a way to make a back-up disk image using included Apple disk utilities? If not, then Apple NEEDS to spell it out, rather than a one line blurb in the disk install manual they publish that says basically: first back up your data. Thanks Apple, big help.
So I ended up using Carbon Copy Cloner, for a variety of reasons. A. it's $5 shareware and B. it specifically got better reviews than SuperDuper ($27). As far as I can tell, Carbon Copy Cloner did an exceptional job of perfectly backing up my old HD. BUT ...
Now here comes the next question ... the CMS enclosure seemed fine, but between CarbonCopyCloner and the USB 2.0 interface, it took over 9 hours to make a disk image of my old hard drive!!! Is THAT normal? Would a Firewire interface have sped this process up? Is SuperDuper faster? I must admit when I then used Disk Utility to restore the disk to the new drive, it took another 6 hours, so my guess is it wasn't the software's fault. Maybe it just takes a **** of a long time to move 80GB data. If the USB 2.0 interface is the bottleneck, then I highly recommend paying extra for a firewire enclosure. Would love to get a definitive answer here.
The process of installing the drive was simple. Thank you Apple (seriously). The new drive booted right up and the system is as zippy as ever ... but you knew it was coming:
The new 7200 rpm drive ran smoothly and absolutely silently in the external enclosure when I was backing up the old HD. Once installed, I immediately noticed a new vibration. Nothing huge, but it's there when now it wasn't on the OEM drive. The whole MacBook vibrates, stem to stern. The drive also seems hotter under my palm. Seeing all manor of these "VIBRATION" issues on other posts, I would suggest that anyone upgrading to a new drive, install the HD first to ***** the level of vibration before going to the lengthy duplicating process. It also seems to spin constantly, which the 5400 may well have done too but was otherwise unnoticeable.
My question here is, since these drives are virtually identical, does the 7200 rpm cause the added vibration & heat not present on the 5400, or could I have less-than-optimal drive which might be improved with a different drive? Also, the last time I had a high vibration drive on my PowerBook G3 it continued to get worse over the course of a year and Apple finally replaced it under Apple Care.
All-in-all it was a simple and relatively straightforward process once I found all the pieces, that is and Apple did not make it easy. I chewed up a lot of time I did not have looking for instructions. I've been using Macs since the original Macintosh in 1984. Ah I long for the days when I could just open a disk, insert another, select all and drag the contents to a new disk and voila! An exact copy of the original. Apple finally gets an A+ for RAM & Drive upgrade accessibility. But they get an F for making the data migration process as complicated as possible, particularly for something as important as our data. I'm sure their strategy is for everyone to take their computers to the Apple Store for upgrades and anyone else should already know how to do it. Well, I would suggest that most of us fall somewhere in the middle. We can put the new drive in and backup our data, but like making a good cake, we need the recipe.

Doug, I appreciate your input, however re-installing OSX is exactly what I DON'T want to do. Not only would it take an extended amount of time to update from 10.4.6 to 10.4.10 but importing files from the old hard disk comes nowhere near copying over every modification I've made to my system. The idea here, as I would think with anyone upgrading their hard drive with a perfectly working system, is to increase disk space and just keep right on going without missing a step. WIth all due respect your suggestion is absolutely the wrong advice in this situation. The last time I took such advice, I found myself missing many of the system helper applications allowing me to access hardware and software and all of it had to be reinstalled as I discovered things were no longer working as they should have. I DO NOT recommend re-installing OS X to anyone wishing to upgrade their drive, unless you are having problems with your system or just want to clean house. Apple should understand this. The bug thing on the install disk is just one of the many headaches involved in this process. My understanding was that I cannot make a disk image from the install disk was well as being unable to restore. However, if that's possible, then I could have done what I wanted without using a third party "shareware" solution. I will check it out and report back. Call me paranoid, but I would prefer to keep my data backup in the hands of those who formatted it originally, i.e. Apple. I would happily use a proven commercial utility, but for something as routine as upgrading my hard disk, I shouldn't have to pay to do it. Time was, if Apple had a bug in their startup utility disk, they would have corrected the error and sent a replacement to all registered users. Time was.

How to install XP on an R61i with a new hard disk

I have an R61i which I've used for years. The hard disk died and I put in a new unpartitioned hard disk.
Our IT guy has provided me with the six disk set "Thinkpad Product Recovery CD for Thinkpad T61, R61 ... " as well as an OEM MS Windows XP install disk complete with valid product key.
First I tried to boot the Recovery CD #1. It is not bootable.
Then I installed XP from the MS XP disk. Everything goes OK, but the drivers for the R61i network interfaces and other special hardware are not on the MS XP disk. When I look for an application on the Recovery Disks that might install them, there is none.
Then I tried "search for new hardware", so XP found the unsupported network interfaces. I gave Recovery Disk #1 as the location of the drivers to be loaded. XP did not find the needed drivers there.
Then I went to the Lenovo site and found an install file for their recovery environment. I downloaded it on another machine, burned a DVD, and ran it on the R61i. It won't run because there is no .NET framework in the XP that was loaded from the MS XP disk.
It seems likely that everything that I need to get the R61i set up with all its hardware should be on the recovery disks somewhere, but how can I get to it?
Why is this so difficult? Surely I am not the only person who has ever had to replace a dead hard drive!!!

Welcome to the forum. The simplest way to get the drivers you need is to download and install ThinkVantage System Update You'll need version 3.16 for For Windows 2000, XP and Vista.
After you install SU, run it and let it find all the device drivers, ThinkVantage utilities and such for your system. Then let SU install them for you.
Alternatively you could go to Drivers and software - ThinkPad R61 to manually download and install what you need. That's a lot more work.
Cheers... Dorian Hausman
X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

Trying to install OS X 10.3 on a new hard disk.

I inserted a new hard drive into my iMac, as I knew that I needed more hard disk space for Panther then the 6 GB that I had with 9.2.2 (not for the install, which only requires 2 GB, but for general use).
I zeroed it and formatted it with Mac OS Extended (Journaled), but when I continued with installation it said, "You cannot install Mac OS X on this volume. You cannot start up your computer using this volume." when I tried to select a volume for installation.
Although I don't want to install until I have checked the firmware is updated (using the old hard drive and OS 9.2.2), I obviously don't want these problems when I try to install in a month or so.
Hard disk is Maxtor 6E040L0, 38.3 GB.
I have looked at Solution: mac os x cannot start up from this volume (http://discussions.apple.com/thread.jspa?messageID=2265801&#2265801), but the info says that the drive does have Applepartitionscheme. I will try it with the opposing scheme, if possible, but I assume that won't work.

To install Panther, you need the retail install version CDs (black with silver X). I suspect you are trying to use a model specific version or upgrade version (gray), that won't work.
When you formatted the new drive, did you check to install the OS 9 drivers? The drivers need to be installed if you want to be able to boot OS 9.x. If you just want to be able to run in classic mode, the drivers are not necessary.
If OS X has never been installed on your Mac, you need to check if your Mac requires a firmware (Boot ROM version in System Profiler) update. Mac OS X: Available firmware updates
http://docs.info.apple.com/article.html?artnum=86117 If an update is required, the update must be installed (using OS 9) BEFORE you install OS X.
 Cheers, Tom

Lenovo Windows 7 Upgrade questions (please help)

Dear Lenovo Community:
I recently purchased a Thinkpad T500 and signed up for the Lenovo Windows 7 Upgrade Program. I have a few questions that I haven't been able to find the answers to elsewhere. I was hoping some of you could help:
1) Will the Lenovo Windows 7 Upgrade disc include both the 32 and 64 bit install options? My T500 came loaded with Vista Ultimate 32, but I would like to do a clean install of Windows 7 Ultimate 64 if possible.
2) I've recently heard a lot about the Lenovo Enhanced Experience. Can anyone briefly explain what this is? Will I be able to take advantage of all the EE features with my T500 using the Windows 7 Upgrade?
3) My computer came pre-loaded with 3 drives (or maybe they're partitions?): C:, Q: (Lenovo), and S: (ServiceV003). How will these drives/partitions be affected with the Windows 7 Upgrade if I opt for a clean install? Will I be able to eliminate the Q: and S: drives if I want? (I have a Samsung Solid State Drive by the way, in case this matters.)
4) Finally, when will the Upgrade discs be shipping? Lenovo and Mentor Media have been rather silent about when we will receive our upgrades. Can we expect an e-mail update indicating that our order has shipped?
Thanks for your help!

1. Bit foggy on this. Will have to do a clean install for sure. Not sure if 32 and 64 bit are on same disk. As you have ultimate, you might be at an advantage here.
2. Look at the videos in other threads. You will get "some" of the benefit. I'm actually guessing wiht a clean install, you will have afaster machine than one of the EE ones with all of the crapware
3. re-partition into a single drive. They will be of no use to you. Or, pop out the drive and clean install to a new SSD ($250) or WD Scorpio Black ($75) drive for extra speed. I'm doing this giving me the option of putting the old drive back in to have Vista in factory condition if I ever need to (I don't expect to and will probably wipe the drive and re-use it in 6 months).
4. Other thread suggested 1/2 have shipped and rest will ship next week.
T61p, T400
formerly x23, x40

My iMac is from early 2009. Should I have a new hard disk installed to prevent disk failure?

My iMac is from early 2009. Should I have a new hard disk installed to prevent disk failure?

Having a good backup strategy is the best way to prevent data loss.
see > http://www.macworld.com/article/1156643/how_i_back_up_frakes.html
That way if and when your internal hard disk ever does fail or you just what to upgrade your Mac to a larger hard drive, you have a good backup on a external hard drive to recover from.
Personally I use Carbon Copy Cloner and keep current bootable backups on several external hard drives. That way I can either boot up and run or restore from them in case something ever happens to my internal hard drive.

Best way to install a new hard disk

Hi,
I need to change to a bigger hard disk in a Mac Pro G5.
First I used time machine and after the restore, Final Cut ask me to enter the serial number.
Is there a way to move to a new hard disk with out the need to re-install Final Cut and all other Pro Aplications? I heard about clonning a hard drive, but then how do I grow the partition in the new hard disk?
I plane later to format the old hard disk.
Many thanks
Oliver

Hi David,
thanks for your help, I ended up using Time Machine, installing Leopard on the new hard drive and restoring all applications using the wizzard during first boot of Leopard.
After launching Final Cut Pro 4.5, it asked for the serial, so I entered the serial from the about window that I get in the old hard disk.
HTH
Oliver

Installing new OS on new hard disk - multiboot

Hello,
I am somewhat new to Solaris and I am progressively learning new things every day and working towards my SCSA.
I have a Sun Ultra 24 work station running Solaris 10. I am planning on adding an additional hard drive and installing Windows XP on it. If possible, my goal is to be able to choose an OS at startup.
I have read [http://multiboot.solaris-x86.org/| but there are a few things I am not clear on... they somewhat mention what I am trying to do but the scenarios I read about is installing Solaris 10 with a new hard disk on an existing Windows installation. I am trying to do the opposite!
Is it possible to add a new blank hard drive restart the PC and then boot from the cd-rom to install XP without damaging my current Solaris 10 installation? and also what do I need to do in order choose an OS at startup.
I am concerned that if I do this, windows will change the MBR of my primary hard drive (the one with Solaris) and allow only windows to boot.
Look forward to your replies, thanks!
-Mario Alejandro

alan.pae wrote:
It's much easier if you do this in the reverse order. Windows first then Solaris.
If not Windows will declare itself to be the only OS in existence as per Microsoft norms and will blindly ignore anything else on the disk.
So you will need to mark the Solaris partition as active and reboot.
After that add the following to your menu.lst file located in the /boot directory:
title Windows
     rootnoverify (hd0,0)
     chainloader +1
===
modify 0,0 as necessary.
alanThat's maybe what you want that Windows doesn't see the other disk.
If you put Solaris first then the Grub bootloader is also on the first drive.
Unless you would change this in your BIOS (boot from the 2nd), starting GRUB on the 2nd drive then
chainload to the first.

Need to install clean OS on new hard disk for MacBook air

I have just installed a new hard disk on my MacBook air. How do I format and install OS?
What OS to install?
How to format?
The origin hard disk is dead!

Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

I have apple macbook pro mid 2009 ... my hard disk stopped working and i had mac os 10.6.8 in it ... i bought a new hard disk drive but i didn't have my CD so i installed my friend's mac os 10.5.8 in the new hard disk ... i want to get my 10.6.8 back

I have apple macbook pro mid 2009 ... my hard disk stopped working and i had mac os 10.6.8 in it ... i bought a new hard disk drive but i didn't have my CD so i installed my friend's mac os 10.5.8 in the new hard disk ... i want to get my previous 10.6.8 back ... hope there is a way to do so

Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s MobileMe service; fees and
           terms apply.

Re: My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?

Re: My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?

If you are trying to recover photo stream photos, they are only held in iCloud for 30 days. All you would be able ro recover is photo stream photos from the last 30 days.
If you have an iOS device that still has the photo stream photos one it, you can save them to the camera roll by opening the my photo stream album, tapping Edit, tap the photos, tap Share, tap Save to Camera Roll. Once in the camera roll, they can be imported to iPhoto on your Mac as explained here: http://support.apple.com/kb/HT4083.

My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?

My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?

While we all have MacBooks in this forum most of us don’t use iCloud. There's an iCloud Support Community where everybody uses iCloud. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/icloud/icloud_on_my_mac

Installing FF to a new hard disk, how to transfer passwords from the old installation?

I have FF installed to Win2k on a hard disk. I have installed Win7 on a new hard disk and I want to move passwords from the old installation to the new one.
It would be great if I could move all the links I get when I click the http://........ field also.

You can retrieve these from your old Profile. See [[Profiles]] which explains what they contain, and [[Managing Profiles]] for an explanation of how to move your data to the new profile.

Installing OS 10.4.7 on a new hard drive

I am trying to install 10.4.7 on a new hard drive from disc one and it keeps getting stuck. I'm now sure if its the cd or not. What else can I do? Can I use a different computer to do the install, if so how?

It's an imac5, 2 mid 2006 It gets stuck in the "preparing to install" mode. I hooked up the new hard drive to my macbook pro via SATA cable and tried installing from there but the install stopped at do not permission for, i cant remember the file name...something load. i have yet to try to recover anything from the old hard drive, can i do that? According to about this Mac it says my disc utility is 10.5.8

Installing Lenovo Windows 7 upgrade in a new hard disk

Similar Messages

Maybe you are looking for