Installing & Running PDFgServlet Add-on On Remote Server
I'm using CF11 Developer Edition.
Installed PDFgServlet on a remote server.
Using CFAdministrator on my Developer Edition, can VERIFY the remote PDF Service Manager.
But when I go and try to use the cfhtmltopdf tag on my Developer Edition, I get CANNOT CONNECT TO SERVER.
I go to the remote server running PDFgServlet, can see response code 200's when I verify the PDF Service Manager "GET /PDFgServlet/verify HTTP/1.1" 200 0
But I get "POST /PDFgServlet/ HTTP/1.1" 400 1407 when I try to use the tag
If I switch back to my local copy, I get the PDF rendered.
Any thoughts?
It seems you don't have ColdFusion datasource there on your
remote server where you have hosted your application.
Go to CF Admin and create it and map it to your database like
that of your local box.
Thanks
Similar Messages
-
Trying to install Visio 2010 add-in for rack server virtualization - fails
I am running Visio 2010 Professional 32-bit. I am running it on a Windows 7 Enterprise machine, 64 bit. I am trying to install the Visio 2010 Add-In for Rack Server Virtualization. When running the installer I get the following message:
"Setup cannot continue because Visio Add-In for Rack Server Virtualization requires that Visio 2010 Professional or greater be installed. Please install Visio and run setup again."
I downloaded the add in from here: http://www.microsoft.com/download/en/details.aspx?id=26233
I have Visio 2010 Professional installed. What now?Hi,
I have reproduce in Windows 7 SP1 Enterprise 64-bit, Visio 2010 Premium 32-bit, it work fine.
If you did not install Windows 7 SP1, you can download service pack visit following link:
http://support.microsoft.com/kb/976932
Make user you have administrator permission, and you can try to run this program as compatibility mode test if it work.
If you install this Add-in directly after install Visio 2010, it recommended restart computer and then install Add-in.
Best regards
William Zhou CHN
TechNet Community Support -
Hi,
I didn't get any valid category for this item. Hence creating it under C#.
I have two machines source machine, where the web deploy tool is installed and the target machine where the websites are hosted.
I want to run the web deploy command in the source machine and it has to create the Web Deploy package for the website hosted on the Target server.
Basically the Web deploy tool will NOT be installed on the destination server, but still i want to create packages from it. How this can be achieved?
Regards,
Pradeep RHello,
you can move your thread to the asp.net forum, in the installation ans setup section:
http://forums.asp.net/17.aspx/1?Installation+and+Setup -
How can you run a command with elevated rights on a remote server with invoke-command ?
I am trying to run a script on a remote server with invoke-command. The script is starting and is running fine, but the problem is that it should be running with elevated rights on the remote server. On the server where I start the invoke-command, my account has the necessary rights.
The server were I launch the invoke-command is a W2K8 R2. The remote box is a W2K3 with powershell v2.0 installed.
When I launch the script on the remote-box from the command line, I don't get the access denied's.
Is there a way to do this ?
Thanks in advanceThe script that I want to run is to install the windows updates. I get an access denied on the download of the updates.
When I execute the script on an W2K8 box, (not remotely) and I run it with non-elevated rights, I get the same error.
The script is running fine when it is launched on W2K3 box locally with a domain account that has local admin rights, or on a W2K8 R2 server with a domain account that has local admin rights, but with elevated rights.
Thanks in advance for your help.
#=== start script ====
param($installOption="TESTINSTALL",$rebootOption="NOREBOOT")
Function Show-Help
Write-Host ""
Write-Host "SCRIPT: $scriptName <installOption> <RebootOption>"
Write-Host ""
Write-Host "DESCRIPTION: Installatie van WSUS updates op de lokale server"
Write-Host ""
Write-Host "PARAMETERS"
Write-Host " -installOption <[INSTALL|TESTINSTALL]>"
Write-Host " -rebootOption <[REBOOT|NOREBOOT|REBOOT_IF_UPDATED]>"
Write-Host ""
Write-Host "EXAMPLE:"
Write-Host "$ScriptName -installOption INSTALL -rebootOption REBOOT_IF_UPDATED"
Write-Host "$ScriptNAme INSTALL NOREBOOT"
Write-Host ""
Write-Host "Indien beide parameter weggelaten worden zijn de defaultwaarden :"
Write-Host " installOption=TESTINSTALL "
Write-Host " RebootOption=NOREBOOT"
Write-Host ""
Exit
#Include alle globale variablen
$CEIF_WIN_PATH = (get-content env:CEIF_WIN_PATH)
$includeFile=$CEIF_WIN_PATH + "\Scripts\include_win.ps1"
. $includeFile
#initialiseer error count
$errcnt=0
$scriptName=$MyInvocation.MyCommand.Name
#argumenten controleren
$arrInstallOption= "TESTINSTALL", "INSTALL" # Mandatory variable with predefined values
If (!($arrInstallOption –contains $installOption)){ Show-Help }
$arrRebootOption = "REBOOT", "NOREBOOT","REBOOT_IF_UPDATED" # Mandatory variable with predefined values
If (!($arrRebootOption –contains $rebootOption)){ Show-Help }
#Logfile opbouwen
$logfile = get-logfileName($MyInvocation.MyCommand.Name)
Log-scriptStart $MyInvocation.MyCommand.Name $logfile
function Get-WIAStatusValue($value)
switch -exact ($value)
0 {"NotStarted"}
1 {"InProgress"}
2 {"Succeeded"}
3 {"SucceededWithErrors"}
4 {"Failed"}
5 {"Aborted"}
function boot-server()
if ($installOption -eq "TESTINSTALL")
logger "TESTINSTALL : - Reboot local Server" $logfile
else
logger " - Reboot local Server" $logfile
$thisServer = gwmi win32_operatingsystem
$thisServer.psbase.Scope.Options.EnablePrivileges = $true
$thisServer.Reboot()
$logmsg="Install option = " + $installOption + ", RebootOption = $rebootOption"
logger "$logmsg" $logfile
logger "" $logfile
logger " - Creating WU COM object" $logfile
$UpdateSession = New-Object -ComObject Microsoft.Update.Session
$UpdateSearcher = $UpdateSession.CreateUpdateSearcher()
logger " - Searching for Updates" $logfile
$SearchResult = $UpdateSearcher.Search("IsAssigned=1 and IsHidden=0 and IsInstalled=0")
logger " - Found [$($SearchResult.Updates.count)] Updates to Download and install" $logfile
$Updates=$($SearchResult.Updates.count)
logger "" $logfile
foreach($Update in $SearchResult.Updates)
if ($Update.EulaAccepted -eq 0)
$Update.AcceptEula()
# Add Update to Collection
$UpdatesCollection = New-Object -ComObject Microsoft.Update.UpdateColl
$UpdatesCollection.Add($Update) | out-null
if ($installOption -eq "TESTINSTALL")
else
# Download
logger " + Downloading Update $($Update.Title)" $logfile
$UpdatesDownloader = $UpdateSession.CreateUpdateDownloader()
$UpdatesDownloader.Updates = $UpdatesCollection
$DownloadResult = $UpdatesDownloader.Download()
$Message = " - Download {0}" -f (Get-WIAStatusValue $DownloadResult.ResultCode)
if ($DownloadResult.ResultCode -eq 4 )
{ $errcnt = 1 }
logger $message $logfile
# Install
logger " - Installing Update" $logfile
$UpdatesInstaller = $UpdateSession.CreateUpdateInstaller()
$UpdatesInstaller.Updates = $UpdatesCollection
$InstallResult = $UpdatesInstaller.Install()
$Message = " - Install {0}" -f (Get-WIAStatusValue $InstallResult.ResultCode)
if ($InstallResult.ResultCode -eq 4 )
{ $errcnt = 1 }
logger $message $logfile
logger "" $logfile
#Indien er een fout gebeurde tijdens download/installatie -> stuur mail naar windowsteam
if ( $errcnt -gt 0 )
logger " - Fout tijdens de uitvoering van script -> send mail" $logfile
$mailSubject=$MyInvocation.MyCommand.Name
$msg = new-object Net.Mail.MailMessage
$att = new-object Net.Mail.Attachment($logfile)
$smtp = new-object Net.Mail.SmtpClient($smtpServer)
$msg.From = $mailFrom
$msg.To.Add($mailTo)
$msg.Subject = $mailSubject
$msg.Body = “Meer details in attachement”
$msg.Attachments.Add($att)
$smtp.Send($msg)
#Moet de server herstart worden ?
if ($rebootOption -eq "REBOOT_IF_UPDATED" )
if ($Updates -gt 0)
#Reboot the server when updates are installed
boot-server
elseif ($rebootOption -eq "REBOOT")
#reboot the server always
boot-server
else
#Do not reboot the server
logger "Do not reboot the server" $logfile
Log-scriptEnd $MyInvocation.MyCommand.Name $logfile
exit 0 -
Power shell script to install apps in remote server
Hello Masters ,
Tried pssession , invoke command to run a PS1 script in remote server
script wil install a exe file and run a script to install features
no luck no luck no luck
please help !Your code looks fine. Your main problem is that you aren't providing anyone with any useful information about what's going wrong. Is there an error message? Do chickens fly out of the computer speakers instead of your script running as
you expect it to?
My gut instinct tells me that psremoting isn't enabled, or a security configuration isn't working. Use the following links or try psexec instead.
http://technet.microsoft.com/en-us/library/dd315349.aspx
http://technet.microsoft.com/en-us/library/dd347642.aspx
I hope this post has helped! -
SSH SUDO passwordless to run commands on remote server
Hi Experts,
We are running various OS/Network and Database related commands and scripts on Local and Remote Server to perform/compare the results
As part of this activity, we have bottleneck on running commands/scripts on the remote server as we need to provide password everytime whenever we use SSH command
Also, we need to run command as ssh sudo su - oracle for security purpose which prompts password two times.
we would like to automate this process in order to save password securely(temporarily) while running ssh sudo commands/scripts.
I see, there are various solutions using SSHPASS,EXPECT commands, however we dont have anything available to use within our group.
We may not be able to use SSHPASS as this component not installed during VM build, so we left with only option to use EXPECT.
So, Need your help to get any example working script using EXPECT for ssh sudo passwordless connection.
Appreciate if anybody can share ideas or working scripts
Thanks in advanceFWIW, here is a small script that I wrote several years ago that may help you to automate the password less ssh setup with a remote system. I just verified it and changed it to create a RSA key. The script still works and runs fine under Oracle Linux and Mac OS X.
Simply create a script called "passwordless-ssh" with the content shown below.
Assign execute privileges: chmod u+x passwordless-ssh
Then run the script as following:
./passwordless-ssh user@target_hostname_or_ip
The script will create a ssh RSA private and public key, prompt for the remote host password and the copy the pubic key to the remote host. A subsequent ssh login to the remote host should no longer prompt for the password. It is essential however that the scrips runs in an interactive session, which is verified.
#!/bin/bash
# Creating SSH public RSA key if non exist and copying it to remote target
# for passwordless SSH login.
# Author: Catch 22, Oracle OTN, 28-APR-2015
# Arguments: $1 (ssh login to remote target)
ME=passwordless-ssh
LOGFILE="/tmp/$ME.log"
f-mode()
# Check if session is interactive (terminal) or non-interactive (UDEV).
# Output: 0 = interactive, 1 = non-interactive
[[ -t 0 || -p /dev/stdin ]] && return 0 || return 1
f-log()
# Display messages in interactive mode, or write output to syslog
# (/var/log/messages) when in non-interactive mode. Write the messages
# to a logfile if the syslog logger interface command is not available.
# Input: $1 = text
if f-mode; then
echo "$ME: $1"
elif hash logger; then
logger "$ME: $1"
else
echo "$ME:`date`: [logger] Cannot execute, aborting" >> $LOGFILE
echo "$ME:`date`: $1" >> $LOGFILE
fi
# Exit and show error if current session is not interactive.
[ ! f-mode ] && f-log "[session] non-interactive, aborting" && exit 1
keyfile="$HOME/.ssh/id_rsa"
[ -z "$1" ] && echo "Missing 'user@target_host' argument. Aborted." && exit 1
if [ ! -f $keyfile ]; then
mkdir -p $HOME/.ssh
ssh-keygen -t rsa -f $keyfile -N ''
fi
keycode=`cat $keyfile.pub`
remote_cmd2="echo "$keycode" >> $remote_ssh_file; chmod 644 $remote_ssh_file;"
remote_ssh_dir="~/.ssh"
remote_ssh_file="$remote_ssh_dir/authorized_keys"
ssh -q $1 "mkdir -p $remote_ssh_dir; chmod 700 $remote_ssh_dir
echo "$keycode" >> $remote_ssh_file; chmod 644 $remote_ssh_file"
unset ME LOGFILE keyfile keycode remote_ssh_dir remote_ssh_file
#END -
Using
Firefox 17.0
openSUSE 12.1
Running a videoclip on localhost the clip works fine.
Running the clip from a remote server I hear the voice but no picture
Using Opera 12.12 build 1707 the clip works fine from remote server
How to fix this?
I usually use Firefox in daily workThanks for response.
In https://www.mozilla.org/en-US/plugincheck/
VLC Web Plugin
Version 2.0.5 Twoflower, copyright 1996-2011 VideoLAN and Authors
http://www.videolan.org/vlc/
2.0.5
Up to Date
Shockwave Flash 11.2 r202
11.2.202.0
Up to Date
NPAPI Plugins Wrapper 1.4.4
nspluginwrapper is a cross-platform NPAPI plugin viewer, in particular for linux/i386 plugins.
This beta software is available under the terms of the GNU General Public License.
Unknown plugin
Research
IcedTea-Web Plugin (using IcedTea-Web 1.3.1 (suse-17.1-x86_64))
The IcedTea-Web Plugin executes Java applets.
Unknown plugin
Research
(This is installed on PC)
PackageKit
Plugin for Installing Applications (new)
Unknown plugin
Research
Skype Buttons for Kopete
Mime Type x-skype for Skype Buttons
Unknown plugin
Research
FIREFOX IN SAFE MODE following instructions
Same problem
In https://www.mozilla.org/en-US/plugincheck/
Clicking
Package Kit Research button = https://www.mozilla.org/en-US/plugincheck/null
Skype Buttons for Kopete = https://www.mozilla.org/en-US/plugincheck/null
Why videoclip is ok in Firefox running from localhost, but not in Firefox running from remote server.
The videoclip is ok as it shows in Opera both from localhost and remote server.
I am using KDE 4.7.2 (4.7.2) "release 5" -
Is ds designer able to run a job against a remote job server?
I looked around for a quite while and couldn't find anywhere it's mentioned that the ds designer can run a job against a job server running on another machine. To me it seems that the designer and DS Server Manager can only pick up local job servers. There is no way for they to specify the hostname of the remote machine having the job server running.
Could anybody here help me out with this problem? Our environment has restriction that developers have no local admin privilege so they can't start a local job server as a Windows service. The only solution for us is to use the remote job server running on the dedicated server. BTW, we don't use Unix/Linux at all.
thanks in advance.yes, Designer can run job on job server that is installed on different machine, the job server machine can be Linux\Unix or Windows
for the remote job server to be visible in Desginer, you will have Register the local repository with the Remote job server
to Register a Local Repository with a Remote job Server, go to remote job server machine
open the Server Manager
In the server Manager, go to the job server window, select the job server click on edit in this window you can associate as many local repository as you want with this job server
restart the Desginer, login to the local repo that you have added to job server
click on Tools->Options
expand Designer node, click on Environment
in the Default job Server drop down list you will see the remote job server
please refer the technical maual for Adding Job server using Server Manager and also how to add repository to job server -
Hello
I have been trying to install Office 2010 Pro Plus onto a Server 2003 Terminal Services server. We have an OVS license and I have followed all the procedures (and variations) noted in
http://technet.microsoft.com/en-us/library/ff506201.aspx . However, we still get the error message 'Only administrators have permission to add, remove, or configure server software
during a terminal service remote session.' when users logon via an RDP session. If they logon locally, the applications start without problem. I have tried the manual and .msp setup, installed via the 'Add\Remove Programs, install using the command line with
'Change User /install' and then 'Change User /execute'. None of this stops the message and allows the users to use Office via TS.
Is there a step missing from the Technet site that I need to get the users working?
Any ideas would be really appreciated.
Thank youThis has not fixed my issue. I still get the message "Only administrators have permission to add, remove, or configure server software during a terminal service remote session". If I add the user into the local admins group. When I login as the
user in question or any user onto the server in question the message above appears.
When I run Lync from the shortcut on the remote drive it works. But when I run it from the desktop and start menu it displays the above error. I spoke to Ctrix who have said that it is a permissions issue. I have checked and all permissions seem to be the
same.
Please can you help?
Kind Regards, PenDraKon -
Log on to remote server and start database -error while installing CI in HA
Hello All,
We are installing ECC 6.0 with High Availability using HP-UX. We have completed installation in ASCS and Database Instance. Now when were trying to install in Central Instance, we encountered an error at Start Instance which informed us to Log on to remote server and start database. However the database is already running in DB node. Please find the log below.
TRACE 2011-06-10 16:31:45.825 [syuxctask.cpp:1382]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 25742
INFO 2011-06-10 16:31:45.835
CJSlibModule::writeInfo_impl()
Output of /usr/sap/PE2/SYS/exe/run/startsap all DVEBMGS01 DBMCI001 is written to the logfile start_PE2_DVEBMGS01.log.
WARNING 2011-06-10 16:31:46.345
CJSlibModule::writeWarning_impl()
Execution of the command "/usr/sap/PE2/SYS/exe/run/startsap all DVEBMGS01 DBMCI001" finished with return code 6. Output:
Database PE2 must be started on remote server
Log on to remote server and start database
WARNING[E] 2011-06-10 16:31:46.355
CJSlibModule::writeError_impl()
CJS-20022 Could not start instance 'DVEBMGS01' of SAP system PE2.
TRACE 2011-06-10 16:31:46.355 [iaxxejsbas.hpp:408]
handleException<ESAPinstJSError>()
Converting exception into JS Exception EJSException.
TRACE 2011-06-10 16:31:46.355
Function setMessageIdOfExceptionMessage: ind-rel.ind-os.ind-db.webas.startInstanceFailed
WARNING[E] 2011-06-10 16:31:46.355
CJSlibModule::writeError_impl()
CJS-20022 Could not start instance 'DVEBMGS01' of SAP system PE2.
TRACE 2011-06-10 16:31:46.355 [iaxxejsbas.hpp:483]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
TRACE 2011-06-10 16:31:46.405 [syuxctask.cpp:1382]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 25793
ERROR 2011-06-10 16:31:46.525 [sixxcstepexecute.cpp:950]
FCO-00011 The step start with step key |NW_ABAP_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|10|0|NW_CI_Instance_Start|ind|ind|ind|ind|2|0|start was executed with status ERROR .
TRACE 2011-06-10 16:31:46.555 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing option SAP ERP 6.0 EHP4 Ready - Support Release 1 > SAP Application Server ABAP > Oracle > High-Availability System > Central Instance . You can now: </p> <ul> <li> Choose <i>Retry</i> to repeat the current step. </li> <li> Choose <i>View Log</i> to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> <p> Log files are written to /tmp/sapinst_instdir/ERPEhP4/AS-ABAP/ORA/HA/CI. </p> </body></html>
TRACE 2011-06-10 16:31:46.555 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
Kindly let us know how to rectify the error and prroceed further with the instalaltion.
Thanks
RishiDear Guys,
we didnt change the date and time but i m very sure it is same trans.log file.
for your kind information please note SID and Nodes details
Sid (PE2)
DB Node : DBMDB001
CI Node : DBMCI001
also i am attaching starting part of the file.
4 ETW000 R3trans version 6.14 (release 701 - 26.01.09 - 12:46:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 07.11.2010 - 03:44:06
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Sun Nov 7 03:44:06 2010 295 0.000295
4 ETW000 [dev trc ,00000] db_con_init called 22 0.000317
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 116 0.000433
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/PC1/SYS/exe/run/dboraslib.so' ...
4 ETW000 64 0.000497
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/PC1/SYS/exe/run/dboraslib.so), hdl 0
4 ETW000 32161 0.032658
4 ETW000 [dev trc ,00000] Library '/usr/sap/PC1/SYS/exe/run/dboraslib.so' loaded
4 ETW000 39 0.032697
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library
/usr/sap/PC1/SYS/exe/run/dboraslib.so
4 ETW000 111 0.032808
4 ETW000 [dev trc ,00000] Version of '/usr/sap/PC1/SYS/exe/run/dboraslib.so' is "700.08",
patchlevel (0.25)
4 ETW000 265 0.033073
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library
/usr/sap/PC1/SYS/exe/run/dboraslib.so
4 ETW000 41 0.033114
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library
/usr/sap/PC1/SYS/exe/run/dboraslib.so
4 ETW000 82 0.033196
4 ETW000 [dev trc ,00000] New connection 0 created 52 0.033248
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES,
reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 41 0.033289
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 84 0.033373
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 31 0.033404
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES,
reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 37 0.033441
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.4.0' 601 0.034042
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 25 0.034067
4 ETW000 [dev trc ,00000] Client character set UTF16 -> UTF8 35674 0.069741
4 ETW000 [dev trc ,00000] Client NLS setting (OCINlsGetInfo): 'AMERICAN_AMERICA.UTF8'
4 ETW000 57 0.069798
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPSR3's password 55 0.069853
4 ETW000 [dev trc ,00000] Connecting as /@PC1 on connection 0 (nls_hdl 0) ... (dbsl 700
151208)
4 ETW000 34 0.069887
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 52 0.069939
4 ETW000 [dev trc ,00000] 0 UTF8 0
0x6000000001052910 0x600000000105a3c0 0x600000000106ab38
4 ETW000 58 0.069997
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 40 0.070037
4 ETW000 [dev trc ,00000] Allocating server context handle 27 0.070064
4 ETW000 [dev trc ,00000] Attaching to DB Server PC1
(con_hdl=0,svchp=0x600000000106aa68,srvhp=0x600000000106de78)
4 ETW000 63 0.070127
4 ETW000 [dev trc ,00000] Assigning server context 0x600000000106de78 to service context
0x600000000106aa68
4 ETW000 60612 0.130739
4 ETW000 [dev trc ,00000] Allocating user session handle 97 0.130836
4 ETW000 [dev trc ,00000] Starting user session: OCISessionBegin(con_hdl=0,
usr='/',svchp=0x600000000106aa68, srvhp=0x600000000106de78, usrhp=0x60000000010fc940)
4 ETW000 64 0.130900
4 ETW000 [dev trc ,00000] Assigning user session 0x60000000010fc940 to service context
0x600000000106aa68
4 ETW000 9302 0.140202
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=53, stmth_p=0x6000000001077608)
4 ETW000 198 0.140400
4 ETW000 [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_MODULE(:A0,:A1); END;
4 ETW000 38 0.140438
4 ETW000 [dev trc ,00000] CbApplInfoGet() failed! Ignore, but uninstall callback to avoid more
erroneous calls
4 ETW000 291 0.140729
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=54, stmth_p=0x6000000001078660)
4 ETW000 33 0.140762
4 ETW000 [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_CLIENT_INFO(:A0); END;
4 ETW000 35 0.140797
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001078660)
4 ETW000 937 0.141734
4 ETW000 [dev trc ,00000] SELECT SID FROM V$MYSTAT WHERE ROWNUM<2
4 ETW000 36 0.141770
4 ETW000 [dev trc ,00000] Connected to session 297. 639 0.142409
4 ETW000 [dev trc ,00000] Now '/@PC1' is connected: con_hdl=0, nls_hdl=0, session_id=297.
4 ETW000 38 0.142447
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001078660)
4 ETW000 37 0.142484
4 ETW000 [dev trc ,00000] ALTER SESSION SET NLS_SORT = BINARY
4 ETW000 36 0.142520
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001078660)
4 ETW000 327 0.142847
4 ETW000 [dev trc ,00000] SELECT USERID, PASSWD FROM SAPUSER WHERE USERID IN (:A0, :A1)
4 ETW000 36 0.142883
4 ETW000 [dev trc ,00000] Got SAPSR3's password from OPS$-user 728 0.143611
4 ETW000 [dev trc ,00000] Disconnecting from connection 0 ... 38 0.143649
4 ETW000 [dev trc ,00000] Rolling back transaction ... 31 0.143680
4 ETW000 [dev trc ,00000] Closing user session
(con_hdl=0,svchp=0x600000000106aa68,usrhp=0x60000000010fc940)
4 ETW000 210 0.143890
4 ETW000 [dev trc ,00000] Now I'm disconnected from ORACLE 721 0.144611
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@PC1 on connection 0 (nls_hdl 0) ... (dbsl
700 151208)
4 ETW000 40 0.144651
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 37 0.144688
4 ETW000 [dev trc ,00000] 0 UTF8 0
0x6000000001052910 0x600000000105a3c0 0x600000000106ab38
4 ETW000 37 0.144725
4 ETW000 [dev trc ,00000] Assigning username to user session: con_hdl=0,
usrhp=0x60000000010fc940
4 ETW000 35 0.144760
4 ETW000 [dev trc ,00000] Assigning password to user session: con_hdl=0,
usrhp=0x60000000010fc940
4 ETW000 40 0.144800
4 ETW000 [dev trc ,00000] Starting user session: OCISessionBegin(con_hdl=0, usr=SAPSR3/<pwd>,
svchp=0x600000000106aa68, srvhp=0x600000000106de78, usrhp=0x60000000010fc940)
4 ETW000 337 0.145137
4 ETW000 [dev trc ,00000] Assigning user session 0x60000000010fc940 to service context
0x600000000106aa68
4 ETW000 4085 0.149222
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=54, stmth_p=0x6000000001077608)
4 ETW000 63 0.149285
4 ETW000 [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_CLIENT_INFO(:A0); END;
4 ETW000 37 0.149322
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 585 0.149907
4 ETW000 [dev trc ,00000] SELECT SID FROM V$MYSTAT WHERE ROWNUM<2
4 ETW000 36 0.149943
4 ETW000 [dev trc ,00000] Connected to session 297. 350 0.150293
4 ETW000 [dev trc ,00000] Now 'SAPSR3/<pwd>@PC1' is connected: con_hdl=0, nls_hdl=0,
session_id=297.
4 ETW000 38 0.150331
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 38 0.150369
4 ETW000 [dev trc ,00000] ALTER SESSION SET NLS_SORT = BINARY
4 ETW000 34 0.150403
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 294 0.150697
4 ETW000 [dev trc ,00000] SELECT VALUE FROM V$NLS_PARAMETERS WHERE PARAMETER IN
('NLS_LANGUAGE', 'NLS_TERRITORY', 'NLS_CHARACTERSET') ORDER BY PARAM
4 ETW000 66 0.150763
4 ETW000 [dev trc ,00000] ETER
4 ETW000 34 0.150797
4 ETW000 [dev trc ,00000] Database NLS settings: AMERICAN_AMERICA.UTF8 329 0.151126
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 856 0.151982
4 ETW000 [dev trc ,00000] SELECT UPPER(INSTANCE_NAME),HOST_NAME,VERSION,TO_CHAR
(STARTUP_TIME,'MON DD, YYYY, HH24:MI:SS') FROM V$INSTANCE
4 ETW000 36 0.152018
4 ETW000 [dev trc ,00000] DB instance PC1 is running on scmdb001 with ORACLE version
10.2.0.4.0 since NOV 07, 2010, 03:23:10
4 ETW000 349 0.152367
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 38 0.152405
4 ETW000 [dev trc ,00000] SELECT SUBSTR(NAME,1,3), TO_CHAR(CREATED,'YYYYMMDDHHMMSS')
FROM V$DATABASE -
Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise
Standalone installer available here
http://www.microsoft.com/en-us/download/details.aspx?id=28972
fails with error code 0x80004005
Is this because my installation has issues, or would the admin pack files be updated for RTM?
Thank you in advance for any insightFound the solution here:
http://social.technet.microsoft.com/Forums/en-US/w8itprogeneral/thread/6d8745e0-c4c1-463a-b4bb-09f6c9c22527
Workaround:
Download the RSAT package intended for Windows 8 Release Preview: http://www.microsoft.com/en-us/download/details.aspx?id=28972
Extract the .msu file with a tool such as 7-Zip.
Open an Admin command prompt and change directory to where you extracted the .msu.
Run the following command to install (if x86 you probably have a different .xml filename): pkgmgr /n:Windows6.2-KB2693643-x64.xml
Wait a while. You can look in task manager for pkgmgr. When it disappears, the installation is done.
Use the tools as per usual. -
Import.py runs fine locally, but fails on the remote server
I have the following import.py file (from The Definitive Guide to SOA Oracle Service Bus), which I am calling from an ANT script. It runs fine when I include the parameters for the server running on my machine, but when I change the params to our test server, it connects to the server, but can't create a session. I will include the output of both runs as well. The test server runs on a cluster. Does that make a difference?
LOCAL OUTPUT:
Buildfile: C:\Dev\bea\ALSB\crash_alsb\build.xml
local.import:
[echo] importscript: import.py
[java] Initializing WebLogic Scripting Tool (WLST) ...
[java] Welcome to WebLogic Server Administration Scripting Shell
[java] Type help() for help on available commands
[java] Loading Deployment config from : local.import.properties
[java] Connecting to t3://localhost:7001 with userid weblogic ...
[java] Successfully connected to Admin Server 'AdminServer' that belongs to domain 'alsb_domain'.
[java] Warning: An insecure protocol was used to connect to the
[java] server. To ensure on-the-wire security, the SSL port or
[java] Admin port should be used instead.
[java] Location changed to domainRuntime tree. This is a read-only tree with DomainMBean as the root.
[java] For more help, use help(domainRuntime)
[java] Attempting to import : crash-alsb-20090205.jar on ALSB Admin Server listening on : t3://localhost:7001
[java] Read file crash-alsb-20090205.jar
[java] Created session name SessionScript1236884174250
[java] finding service...
[java] creating session...
[java] return SessionMBean...
[java] SessionMBean started session
[java] ALSBConfiguration MBean found [MBeanServerInvocationHandler]com.bea:Name=ALSBConfiguration.SessionScript1236884174250,Type=com.bea.wli.sb.management.configuration.ALSBConfigurationMBean
[java] Jar Uploaded
[java] ALSB project crash_alsb will get overlaid
[java] Default importPlan
[java] Update Archive crash_alsb/crash-alsb-20090205
[java] Update Archive crash_alsb/crash-config
[java] Update WSDL crash_alsb/resources/wsdls/crash-jxdm-20070731
[java] Update BusinessService crash_alsb/business/crash-20090305
[java] Update ProxyService crash_alsb/proxy/crash-jxdm-20090305
[java] Update Archive crash_alsb/export
[java] got a ref TypeId of <method com.bea.wli.config.Ref.getTypeId of com.bea.wli.config.Ref instance at 22900920>
[java] got a ref TypeId of <method com.bea.wli.config.Ref.getTypeId of com.bea.wli.config.Ref instance at 23950494>
[java] got a ref TypeId of <method com.bea.wli.config.Ref.getTypeId of com.bea.wli.config.Ref instance at 16994189>
[java] got a ref TypeId of <method com.bea.wli.config.Ref.getTypeId of com.bea.wli.config.Ref instance at 6011310>
[java] got a ref TypeId of <method com.bea.wli.config.Ref.getTypeId of com.bea.wli.config.Ref instance at 33251361>
[java] got a ref TypeId of <method com.bea.wli.config.Ref.getTypeId of com.bea.wli.config.Ref instance at 6566192>
[java] Modified importPlan
[java] Update Archive crash_alsb/crash-alsb-20090205
[java] Update Archive crash_alsb/crash-config
[java] Update WSDL crash_alsb/resources/wsdls/crash-jxdm-20070731
[java] Update BusinessService crash_alsb/business/crash-20090305
[java] Update ProxyService crash_alsb/proxy/crash-jxdm-20090305
[java] Update Archive crash_alsb/export
[java] Deployment of : crash-alsb-20090205.jar successful
BUILD SUCCESSFUL
Total time: 8 seconds
TEST SERVER OUTPUT:
Buildfile: C:\Dev\bea\ALSB\crash_alsb\build.xml
remote.import:
[echo] importscript: import.py
[java] Initializing WebLogic Scripting Tool (WLST) ...
[java] Welcome to WebLogic Server Administration Scripting Shell
[java] Type help() for help on available commands
[java] Loading Deployment config from : remote.import.properties
[java] Connecting to http://<IP removed>:7001 with userid <userid removed> ...
[java] Successfully connected to Admin Server 'AdminServer' that belongs to domain 'WL-DEV'.
[java] Warning: An insecure protocol was used to connect to the
[java] server. To ensure on-the-wire security, the SSL port or
[java] Admin port should be used instead.
[java] Location changed to domainRuntime tree. This is a read-only tree with DomainMBean as the root.
[java] For more help, use help(domainRuntime)
[java] Attempting to import : crash-alsb-20090205.jar on ALSB Admin Server listening on : http://<IP removed>:7001
[java] Read file crash-alsb-20090205.jar
[java] Created session name SessionScript1236884107843
[java] finding service...
[java] null returned from findService method.
[java] creating session...
[java] Unexpected error: exceptions.AttributeError
[java] Unexpected error: exceptions.AttributeError
[java] No stack trace available.
[java] Problem invoking WLST - Traceback (innermost last):
[java] File "C:\Dev\bea\ALSB\crash_alsb\import.py", line 212, in ?
[java] File "C:\Dev\bea\ALSB\crash_alsb\import.py", line 130, in importToALSBDomain
[java] File "C:\Dev\bea\ALSB\crash_alsb\import.py", line 197, in getSessionMBean
[java] AttributeError: 'None' object has no attribute 'createSession'
[java] Java Result: 1
BUILD SUCCESSFUL
Total time: 14 seconds
import.py
from java.util import HashMap
from java.util import HashSet
from java.util import ArrayList
from java.io import FileInputStream
#from com.bea.wli.config import TypeIds
from com.bea.wli.sb.util import Refs
from com.bea.wli.config.customization import Customization
from com.bea.wli.sb.management.importexport import ALSBImportOperation
from com.bea.wli.sb.management.configuration import SessionManagementMBean
from com.bea.wli.sb.management.configuration import ALSBConfigurationMBean
import sys
#=======================================================================================
# Entry function to deploy project configuration and resources
# into a ALSB domain
#=======================================================================================
def importToALSBDomain(importConfigFile):
try:
SessionMBean = None
print 'Loading Deployment config from :', importConfigFile
exportConfigProp = loadProps(importConfigFile)
adminUrl = exportConfigProp.get("adminUrl")
importUser = exportConfigProp.get("importUser")
importPassword = exportConfigProp.get("importPassword")
importJar = exportConfigProp.get("importJar")
customFile = exportConfigProp.get("customizationFile")
passphrase = exportConfigProp.get("passphrase")
project = exportConfigProp.get("project")
connectToServer(importUser, importPassword, adminUrl)
print 'Attempting to import :', importJar, "on ALSB Admin Server listening on :", adminUrl
theBytes = readBinaryFile(importJar)
print 'Read file', importJar
sessionName = createSessionName()
print 'Created session name ', sessionName
SessionMBean = getSessionMBean(sessionName)
print 'SessionMBean started session'
ALSBConfigurationMBean = findService(String("ALSBConfiguration.").concat(sessionName), "com.bea.wli.sb.management.configuration.ALSBConfigurationMBean")
print "ALSBConfiguration MBean found", ALSBConfigurationMBean
ALSBConfigurationMBean.uploadJarFile(theBytes)
print 'Jar Uploaded'
if project == None:
print 'No project specified, additive deployment performed'
importResult = ALSBConfigurationMBean.importUploaded(None, false, true, passphrase)
SessionMBean.commitSession(sessionName)
else:
print 'ALSB project', project, 'will get overlaid'
alsbJarInfo = ALSBConfigurationMBean.getImportJarInfo()
alsbImportPlan = alsbJarInfo.getDefaultImportPlan()
alsbImportPlan.setPassphrase(passphrase)
operationMap=HashMap()
operationMap = alsbImportPlan.getOperations()
print
print 'Default importPlan'
printOpMap(operationMap)
set = operationMap.entrySet()
alsbImportPlan.setPreserveExistingEnvValues(true)
#boolean
abort = false
#list of created ref
createdRef = ArrayList()
for entry in set:
ref = entry.getKey()
op = entry.getValue()
#set different logic based on the resource type
type = ref.getTypeId
print 'got a ref TypeId of ', type
if type == Refs.SERVICE_ACCOUNT_TYPE or type == Refs.SERVICE_PROVIDER_TYPE:
if op.getOperation() == ALSBImportOperation.Operation.Create:
print 'Unable to import a service account or a service provider on a target system', ref
abort = true
elif op.getOperation() == ALSBImportOperation.Operation.Create:
#keep the list of created resources
createdRef.add(ref)
if abort == true :
print 'This jar must be imported manually to resolve the service account and service provider dependencies'
SessionMBean.discardSession(sessionName)
raise
print
print 'Modified importPlan'
printOpMap(operationMap)
importResult = ALSBConfigurationMBean.importUploaded(alsbImportPlan)
printDiagMap(importResult.getImportDiagnostics())
if importResult.getFailed().isEmpty() == false:
print 'One or more resources could not be imported properly'
raise
#customize if a customization file is specified
#affects only the created resources
if customFile != None :
print 'Loading customization File', customFile
print 'Customization applied to the created resources only', createdRef
iStream = FileInputStream(customFile)
customizationList = Customization.fromXML(iStream)
filteredCustomizationList = ArrayList()
setRef = HashSet(createdRef)
# apply a filter to all the customizations to narrow the target to the created resources
for customization in customizationList:
print customization
newcustomization = customization.clone(setRef)
filteredCustomizationList.add(newcustomization)
ALSBConfigurationMBean.customize(filteredCustomizationList)
#SessionMBean.commitSession(sessionName)
SessionMBean.activateSession(sessionName,"active session from import.py")
print "Deployment of : " + importJar + " successful"
except:
print "Unexpected error:", sys.exc_info()[0]
if SessionMBean != None:
SessionMBean.discardSession(sessionName)
raise
#=======================================================================================
# Utility function to print the list of operations
#=======================================================================================
def printOpMap(map):
set = map.entrySet()
for entry in set:
op = entry.getValue()
print op.getOperation(),
ref = entry.getKey()
print ref
print
#=======================================================================================
# Utility function to print the diagnostics
#=======================================================================================
def printDiagMap(map):
set = map.entrySet()
for entry in set:
diag = entry.getValue().toString()
print diag
print
#=======================================================================================
# Utility function to load properties from a config file
#=======================================================================================
def loadProps(configPropFile):
propInputStream = FileInputStream(configPropFile)
configProps = Properties()
configProps.load(propInputStream)
return configProps
#=======================================================================================
# Connect to the Admin Server
#=======================================================================================
def connectToServer(username, password, url):
connect(username, password, url)
domainRuntime()
#=======================================================================================
# Utility function to read a binary file
#=======================================================================================
def readBinaryFile(fileName):
file = open(fileName, 'rb')
bytes = file.read()
return bytes
#=======================================================================================
# Utility function to create an arbitrary session name
#=======================================================================================
def createSessionName():
sessionName = String("SessionScript"+Long(System.currentTimeMillis()).toString())
return sessionName
#=======================================================================================
# Utility function to load a session MBeans
#=======================================================================================
def getSessionMBean(sessionName):
#SessionMBean = findService("Session","com.bea.wli.config.mbeans.SessionMBean")
print "finding service..."
SessionMBean = findService(SessionManagementMBean.NAME,SessionManagementMBean.TYPE)
if SessionMBean == None:
print "null returned from findService method."
print "creating session..."
SessionMBean.createSession(sessionName)
print "return SessionMBean..."
return SessionMBean
# IMPORT script init
try:
# import the service bus configuration
# argv[1] is the export config properties file
importToALSBDomain(sys.argv[1])
except:
print "Unexpected error: ", sys.exc_info()[0]
dumpStack()
raiseYour Template code is messed up.
Use the code validation tools below and fix reported errors.
Code Validation Tools
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Then post your Revised Template.dwt code. Once the editable regions are positioned properly, your child pages should perform better.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
EJB doesnt respond with BPEL running on the same remote server
To all,
I have a BPEL transformation (XSL) calling a remote EJB. It worked with the BPEL process running on the BPEL Designer or in the local host. However if I deploy and run the same BPEL process to the remote server (i.e. the EJB and the BPEL reside in the same server), the EJB doesnt seem to respond. The process runs fine but just does have the values from the EJB. Where should I look and debug this problem?
Here is some more information about the EJB: I have the XSL calls a User Defined Extension component. This component calls a Java utility program in turn calls an EJB client (i.e. Business Delegate). The EJB client calls a Session bean (Session Façade) in turn calls two Entity beans. I packaged the codes in two jars: the EJB and the EJB client in one jar and Java utility programs in another jar.
I deployed the EJB in EAR using the JDeveloper to the remote BPEL server. I FTPed the two JAR files into <ORACLE_HOME>/j2ee/OC4J_BPEL/applib in the remote server. After the deployment, I test the transformation either from BPEL Designer and BPEL local host. They both access the remote EJB successfully. However if I deploy the BPEL process to the remote server and run it from the remote server, the EJB doesnt seem to respond. All the functions worked correctly except there is no value from the EJB. Any advice will be appreciated.Try the following, in order, until (hopefully) resolved:
1a. Delete Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Under "Preferred Networks," delete the network(s) you regularly use from the list.
1b. Delete AirPort Keychain Entries
Launch the "Keychain Access" application located in Applications/Utilties.
In the windows on the left side: Select login for Keychains and "All Items" for Category.
Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
1c. Add Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Add the preferred network(s) using the "+" button.
Restart or log out then back in.
2. Move System Configuration Files
(Note: You will have to reestablish your network connections settings.)
Go to /Library/Preferences
Move the SystemConfiguration folder to the desktop.
Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.) -
Remote Server Administration Tools for Windows 10 Technical Preview Not installing
When i try and install the remote server administration tools for windows 10 on my windows 10 technical preview install i get this error
Any ideas why this is happening? when i'm installing the correct version for windows 10
http://www.microsoft.com/en-us/download/details.aspx?id=44280On Thu, 12 Feb 2015 07:33:29 +0000, samfty wrote:
Any ideas why this is happening? when i'm installing the correct version for windows 10
If you're running 9926 then you're not installing the correct version. If
you expand the Details section you'll see that version was published last
October. You'll need this one, which was published in at the end of
January:
http://www.microsoft.com/en-us/download/details.aspx?id=45520
Paul Adare - FIM CM MVP
Q. How do you solve bus problems?
A. Shoot the driver. -
I installed Exchange Server 2010 inside my VMWare Windows Server 2008 Ent R2. And After successful installation when I try to open my Exchange Server Console, I am getting the following error message. I am very new to Exchange server please help me
to solve this problem.
Initialization Failed
The following error occurred while searching for the on-premises Exchange server:
[win-.local] Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError
$true -CurrentVersion 'Version 14.1 (Build 218.15)''.
Thanks Vivek
SharePoint Foundation 2010 Book
http://www.redpipit.comHi,
Please have a look at the article below:
Troubleshooting Exchange 2010 Management Tools startup issues
http://blogs.technet.com/b/exchange/archive/2010/02/04/3409289.aspx
Resolving WinRM errors and Exchange 2010 Management tools startup failures
http://blogs.technet.com/b/exchange/archive/2010/12/07/3411644.aspx
Besides, please run the cmdlet below:
set-user alias -remotepowershellenabled$true
Xiu Zhang
TechNet Community Support
Maybe you are looking for
-
How to control Changing of item category in sales order Manually
Hello Gurus, How to restrict manual changing of item category in sales order? Reason for it: When ever they want to give some free goods to customer , they are changing Item category in Standard Sales order at item level then deliverying free goods
-
Change in delivery quantity for batch managed items.
30.09.2010 Hi friends, We have activated batch management. During delivery after the batch is determined and if i want to change the delivery quantity say for example from 50 to 30 then first i have to go and adjust the quantity in the batches to toa
-
I was just trying to fix my wobbly screen and after finishing and connecting the screen to its port once again the screen didn't work but the processor is running normally so i just want to know what is the problem with my mid 2012 macbook pro?
-
BAPI to create a PM notification with a task list (as in IW21)
Hi to all, my question is: is there a bapi to create a PM notification in which I can add a task list? A bapi with which I can simulate the transaction IW21. Thank you very much, Antonio
-
Can't acess my "Site Settings"
Hello folks. I Have a big problem with my SharedPoint of Office 365, some one could help me please? I created a custom layout with HTML 5, and i used this layout for new an Master Page on SharedPoint, the problem is: I switched my default Master Pag