Installing VPN Client 5.0.01.0600 on Vista

Hi There,
I'm having some problems with the VPN client 5.0.01.0600 for Windows Vista.
I've installed the client but when trying to connect I receive the following error;
"Reason 421: The remote peer is not responding"
This to me would suggest an issue with our 2600 series router however ive tried connecting to it using two other laptops running Windows XP (from the same internet connection) and theyve connected fine with no issues.
Ive attached my logs from when I try to connect.
Any ideas would be much appreciated!

Hi Magnus
Uninstall VPN client. Restart the PC
Donwload and run the following software, then restart the PC
http://www.softpedia.com/get/Tweak/Network-Tweak/WinSockFix.shtml
Reinstall VPN client
Regards

Similar Messages

Auto install VPn client via Cisco concentrator, anyone done this before?

This is beginning to frustrate me, I must be missing something.
I have downloaded update-5.0.01.0600-major-K9.zip and unzipped the 3 files to an internal website the VPN users can access. The 3 files are:
binary_config.ini
sig.dat
vpnclient-win-msi-5.0.01.0600-k9.exe
On the concentrator I have added http://webserver/vpn/5.0/
user only get a manual method to update when they connect, I have also tried
http://vogbs010/vpn/5.0/vpnclient-win-msi-5.0.01.0600-k9.exe
Which doesn't work
All want to try and get the Auto-install screen pop which tells the user the update has been downloaded. I'm testing this on VPN client version 4.8.
Hope you can advise.

You should be able to install the 64 bit version of the Cisco VPN software
Latest version is vpnclient-winx64-msi-5.0.07.0440-k9.exe
You should download and run MCPR.exe first, to clean out any traces of McAfee products that conflict with Cisco VPN.
http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe
If there is a problem with vbscript registration on the system - there is a fixit tool from Microsoft for that:
MicrosoftFixit50842.msi
(Using Shrew VPN is a possible workaround.)

Installing VPN Client 5.0.07.0240 on Win 7 Pro 64 bit error 1720

I purchased a new laptop last week. It is Win 7 Pro SP1 64 Bit. Old laptop Win XP Pro. Used Laplink's PCMover to move apps rather than to have to re-install. One of the apps was VPN Client 4.8.02.0010 This app did not work properly on new pc after migration. Had customer send me VPN Client 5.0.07.0240 for 64 Bit. They did so. I installed. I believe it uninstalled the old (migrated) VPN Client but did not do the install of the new VPN Client. Every time I attempt to install, I get error 1720. There is a problem with this Windows Installer Package.A script required for this install to complete could not be run. I called Cisco support and they led me here. I am pretty desperate, been trying to get this done for 18 hours. The reason I called support was I thought I could purchase my own VPN Client, whichever one would be best for me to access several sites that use Cisco VPN's (I have sites that use openvpn, etc), perhaps AnyConnect that I have seen herein, and then Cisco could help me install the client. If that is a good path to take, please let me know, otherwise how do I get this vpn client installed, please. John

Hello John, and everyone.
I am aslo face this issue. I tried to install software cisco VPN client "vpnclient-winx64-msi-5.0.07.0290-k9.exe" in my customer's labtop that installed window 7 64bit and it shows message "cisco vpn client not support 64bits". but why in descript say that "vpnclient-winx64-msi-5.0.07.0290-k9.exe"
"VPN Client Software for x86 64-bit version of Vista/Windows 7 - Microsoft Installer"and when I tried to install it why it shows message can not support with 64 bits? what wrong ? Do anyone have experiences with this issue?
Could anyone help me on this issue or do anyone have other version of Cisco vpn client that can support with window 7 64 bits?
I am happy to see your ideas and answers!!
Thanks
sarem

Installing VPN Client 5.0.07.0290 on Win 7 Pro 64 bit error 1720

Trying to install Cisco VPN client 5.0.07.0290 on new and clear Win 7 Pro 64 bit, I get error 1720. There is a problem with this Windows Installer Package.A script required for this install to complete could not be run.
I contacted Cisco support and they can´t help me yet. I am pretty desperate, been trying to get this done for a long time.
Somebody knows if perhaps any version of AnyConnect could help me?
Thanks in advance.
Guido

Hello,
We came across the same issues. A system engineer found a site to change the MSI and after that we were able to install and distribute for 64bit systems.
http://blog.edwards-research.com/2009/09/ciscovpn-client-32-bit-vista-error-1720/
Regards,
Michael Heer

VPN Client v5.0.01.0600 - Vista and code 412

Does anyone know how to resolve code 412 on WinVista?
See log below:
Thanks, Hans
Cisco Systems VPN Client Version 5.0.01.0600
Copyright (C) 1998-2007 Cisco Systems, Inc. All Rights Reserved.
Client Type(s): Windows, WinNT
Running on: 6.0.6000
Config file directory: C:\Program Files\Cisco Systems\VPN Client\
1 10:33:06.196 12/05/07 Sev=Info/6 CERT/0x63600026
Attempting to find a Certificate using Serial Hash.
2 10:33:06.197 12/05/07 Sev=Info/6 CERT/0x63600027
Found a Certificate using Serial Hash.
3 10:33:06.199 12/05/07 Sev=Info/6 GUI/0x63B00011
Reloaded the Certificates in all Certificate Stores successfully.
4 10:33:09.280 12/05/07 Sev=Info/4 CM/0x63100002
Begin connection process
5 10:33:09.406 12/05/07 Sev=Info/4 CM/0x63100004
Establish secure connection
6 10:33:09.406 12/05/07 Sev=Info/4 CM/0x63100024
Attempt connection with server "zeus.petermac.org"
7 10:33:09.609 12/05/07 Sev=Info/6 IKE/0x6300003B
Attempting to establish a connection with 203.4.167.9.
8 10:33:09.798 12/05/07 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG (SA, KE, NON, ID, VID(Xauth), VID(dpd), VID(Frag), VID(Nat-T), VID(Unity)) to 203.4.167.9
9 10:33:09.801 12/05/07 Sev=Info/4 IPSEC/0x63700008
IPSec driver successfully started
10 10:33:09.801 12/05/07 Sev=Info/4 IPSEC/0x63700014
Deleted all keys
11 10:33:09.801 12/05/07 Sev=Info/4 IPSEC/0x6370000D
Key(s) deleted by Interface (169.254.55.225)
12 10:33:14.826 12/05/07 Sev=Info/4 IKE/0x63000021
Retransmitting last packet!
13 10:33:14.826 12/05/07 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG (Retransmission) to 203.4.167.9
14 10:33:19.896 12/05/07 Sev=Info/4 IKE/0x63000021
Retransmitting last packet!
15 10:33:19.896 12/05/07 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG (Retransmission) to 203.4.167.9
16 10:33:24.966 12/05/07 Sev=Info/4 IKE/0x63000021
Retransmitting last packet!
17 10:33:24.966 12/05/07 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG (Retransmission) to 203.4.167.9
18 10:33:30.036 12/05/07 Sev=Info/4 IKE/0x63000017
Marking IKE SA for deletion (I_Cookie=F1F24D1B25D17EF7 R_Cookie=0000000000000000) reason = DEL_REASON_PEER_NOT_RESPONDING
19 10:33:30.550 12/05/07 Sev=Info/4 IKE/0x6300004B
Discarding IKE SA negotiation (I_Cookie=F1F24D1B25D17EF7 R_Cookie=0000000000000000) reason = DEL_REASON_PEER_NOT_RESPONDING
20 10:33:30.550 12/05/07 Sev=Info/4 CM/0x63100014
Unable to establish Phase 1 SA with server "zeus.petermac.org" because of "DEL_REASON_PEER_NOT_RESPONDING"
21 10:33:30.550 12/05/07 Sev=Info/5 CM/0x63100025
Initializing CVPNDrv
22 10:33:30.552 12/05/07 Sev=Info/6 CM/0x63100046
Set tunnel established flag in registry to 0.
23 10:33:30.552 12/05/07 Sev=Info/4 IKE/0x63000001
IKE received signal to terminate VPN connection
24 10:33:31.058 12/05/07 Sev=Info/4 IPSEC/0x63700014
Deleted all keys
25 10:33:31.058 12/05/07 Sev=Info/4 IPSEC/0x63700014
Deleted all keys
26 10:33:31.058 12/05/07 Sev=Info/4 IPSEC/0x63700014
Deleted all keys
27 10:33:31.058 12/05/07 Sev=Info/4 IPSEC/0x6370000A
IPSec driver successfully stopped

This may help, check possible resolution under windows vista error 412
http://www.cisco.com/en/US/products/sw/secursw/ps2308/prod_release_note09186a0080884df5.html#wp1557323
HTH
Jorge

Error 1406 when Installing VPN Client

I am attempting to install a VPN client on a customers computer and getting
"Error 1406" and that it doesn't have the ability to access certain registry keys.
I am logged in as an administrator in Windows 7 64 bit.
What could be causing this problem? What are possible solutions?
Any help would be appreciated.
Ryan

Neville;
There is a limit to the number of entries in the HKLM\Software\Microsoft\Windows\CurrentVersion\SharedDLLs key, at least on Win95. By removing some other entries, the problem will probably be solved.
Hope this helps.
Filipe Altoe
Applications Engineer
National Instruments

Problems Installing VPN Client on Intel iMac Core Duo

We tried installing the VPN Client software (v.4.9.00.0050) on an Intel Core Duo iMac by dragging the application into the applications folder on the hard drive. When trying to start VPN Client, it gave a message referring to "architecture not supported) and wouldn't start up. We have installed this successfully on other macs outside our office without problems. Does anyone have any suggestions?

For such appkcation to work in a platfrom you need to install the application using the stansard installer supplied with the application.
For more information refer the url given below,
http://www.cisco.com/en/US/products/sw/secursw/ps2308/prod_release_note09186a00806ecf3b.html

After Install VPN Client for Win V4.8 Get Blue Screen

When I installed the VPN client on my machine with XP, SP2 and updates the machine booted until it got to the Windows User Log On Screen where I immediately got a blue screen with the
Stop Code 0x96
- Invalid_Work_Queue_Item -
If I go to Safe Mode and uninstall the client everythings returns to normal. Anyone have any ideas?
Thank You

I too have the same problem. I am trying to connect to my corporate network through VPN(4.6). It ends up in following error.
DRIVER_IRQL_NOT_LESS_OR_EQUAL.
Configuration:
Dell Inspiron E1505.
XP Home SP-2.
VPN 4.6
History:
I was able to connect to VPN for past eight months. I have been working in the network with out any problems. Last month I had some problems in my laptop and ended up in formatting it.
I have used the default OS installation CD shipped along with the laptop. But after the re-installation, the system started failing. I have never been able to connect after that.
I too agree that this may not be same as the one described in initial posting. But the one explained by henryadams is a genuine issue.
This is not only with me. But also happens with two of my colleagues as well.
Would appricate if any one can help on this.
Thanks, Raja

Installing VPN client.. where is kernel source directory?

I need to install Cisco VPN client. It asks me for kernel source directory... What is a kernel source directory?
Thanks

The Arch kernel package does not include the full source, but the kernel's headers are available in /usr/src/linux-<kernel_version>, and will be sufficient for your requirements.
btw vpnc is in the core repo, and there are some cisco-related packages in the AUR also.

Vista, Cisco VPN Client 5.0.01.0600 "Failed to enable Virtual Adapter"

Four times out of five when trying to connect with the VPN client on Vista Business I get a message that the Virtual adapter cannot be enabled.
When checking the logs there are two entries that always is seen together with this failure:
123 09:21:36.026 12/27/07 Sev=Warning/2 CVPND/0xA3400015
Error with call to IpHlpApi.DLL: unable CreateUnicastIpAddressEntry, error 0
129 09:21:55.709 12/27/07 Sev=Warning/3 CVPND/0xA340001A
Failed to find VA MAC Address
Anyone else who have seen this issue on Vista?

Hi Magnus
Uninstall VPN client. Restart the PC
Donwload and run the following software, then restart the PC
http://www.softpedia.com/get/Tweak/Network-Tweak/WinSockFix.shtml
Reinstall VPN client
Regards

VPN-Client V 5.0 under Windows Vista Home Premium - Error for Installation

Hello
I hope you can help me. During installating the VPN-Client I recieve the Error 1609: Users ist not a unser...
One message says that I creat new usergroups. Unfortunately this ist not possible under Vista Home Premium.
Is there a solution, how I can install VPN?
Thanks for your help.
Best regards
Pascal

Try installing the 5.0.00.0340 client version
also see the details of this bug CSCsj89801

Bordermanager VPN-client 3.8.x + netware6.0 + Vista

I'm currently using bordermanager 3.8.16 installed on my Windows Vista and connecting to my office by the Bordermanager VPN-client to a netware6-server (they refuse to upgrade to 6.5) and it's working! (but!).
.. but every hour when my ISP renews it's lease for the IP-adress it won't succeed and the VPN-client and my internet-connection stops working.
Then I have to disconnect/logout the VPN and then reconnect to my ISP and then reconnect/login to the VPN
I also found out that the VPN doesn't work when I'm behind a NAT (but that works on my other computer (with Windows XP).
I know Vista isn't supported on 3.8.x, but I'm wondering if it will get supported in some patch? Or can I perhaps install Bordermanager 3.9SP1 and use it on Netware6 allthough it says in the requirements that it has to be netware6.5?

But when I'm on this page Novell: Downloads
... it says PLATFORMS: Netware 6.5 when doing a mouseover on the link "BorderManager 3.9 Support Pack1".
and when following the link "BorderManager 3.9 Support Pack1" it once again says Platforms: Netware 6.5. And when reading a bit further down on that page under System Requirements:
"1.0 System Requirements
Make sure that NetWare 6.5 SP6 or SP7 with Novell
BorderManager 3.9 is installed in your system, before
you install Novell BorderManager 3.9 SP1."
but if you tell me it works with netware6 I trust you Gonzalo (you've helped me once before). Thanks again, I'll try it.
//reenhilm aka gummi
Originally Posted by mysterious
bm39sp1 contains a specific vpn client for vista. You do not have to
upgrade the server to use it
Gonzalo

Problems with VPN-Client 5.0 instoled on Windows Vista over ADSL Conecction

Hi, I have severals clients that they use Windows Vista and connects throw there lan over a VPN-Client. The clients that has an ADSL connection in there hose has disconect problems. Do you know why?? Do you know same workarround to do?? Thanks.
Regards.

Make sure that you have the right cable pinout and that your ISP has turned on the DSL service. Troubleshoot the DSL connection by watching the modem state of the ADSL interface as the line retrains.
To use the VPN Client, you need
- Direct network connection (cable or DSL modem and network adapter/interface card), or
- Internal or external modem
For further more troubleshoot click this link,
http://www.cisco.com/en/US/docs/security/vpn_client/cisco_vpn_client/vpn_client500_501/release/notes/51client.html#wp1550392

VPN Client 5.0.00.0340 on Vista says connected when not

Hi all,
I'm using VPN Client 5.0.00.0340 on Windows Vista to connect to one of our customers.
When I go to connect and type in my password, it always seems to authenticate correctly and connect to the VPN successfully.
However, about 75% of the time, even though it says it is connected, I do not actually have a connection to the customer network. I can't even ping the servers.
If I disconnect and reconnect repeatedly, on about the third or fourth attempt, I will actually get a connection that works, allowing me to access the remote network.
Does anyone know why this might be? Could it be an issue with my network settings, a setting in the VPN Client software, or even something at the customer end that is set up incorrectly?
Any help would be greatly appreciated.
Chris

Hi,
There's quite a few bugs related to version 5 and Vista. You might want to check the bug toolkit to see if there's anything relevant (including CSCsq34291 which may or may not be related).
Does it work on XP and have you tried rolling back the VPN client version to 4.x to see if it improves things (I've had to do this before).
Please rate useful posts..

I have installed VPN CLIENT Version 4.9.01.0080

I am getting a challenge with creating profiles as therre is no .pcf file exists bcoz I didnt preconfigure anything. Please assist with pointing me to the right direction,
Here is my MacBook Pro 15" info:
Model Name: MacBook Pro
Model Identifier: MacBookPro8,2
Processor Name: Intel Core i7
Processor Speed: 2 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 4 GB
System Version: Mac OS X 10.6.8 (10K549)
Kernel Version: Darwin 10.8.0

Please give some more details such as your operating system. What do you mean by "cant be added"? How are you trying to delete it, and what happens when you try? Error messages received?

Installing VPN Client 5.0.01.0600 on Vista

Similar Messages

Maybe you are looking for