Instance in cloud service keeps unhealthy

Hi team,
We have a cloud service that deploy our production environment in East US Azure data center.
From 4.30 the instances keeps 'Waiting for the status (Role cannot be reached by the host system.)'
and 'Busy (Stabilizing role... Calling OnRoleRun. [2015-05-01T01:39:35Z])'
we tried to image these unhealthy instances but it doesn't work.
we would like to know how can we fix these problems, any feedback will be appreciate.
thanks in advance.

Hello Baker,
It appears to be a residue of the service interruption we had yesterday and today, where multiple regions and multiple azure services were impacted.
Would appreciate your patience and regret the inconvenience caused.
Let us know if the problem persist so that we can continue working this issue.
Regards,
Sadiqh

Similar Messages

I keep getting the trial versions after I've paid for the Creative Cloud service.

I'm currently paying for the creative cloud service and I've downloaded a few of the programs (Indesign, Incopy, Photoshop, Illustrator) but when I open them they are coming up as trial versions. I uninstall the ones that were the trial version and reinstall them and I keep getting the trial version, What should do to fix this problem?

See the following help document:
CS6 or Creative Cloud Reverts to Trial Mode
http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

Deploying Windows Azure Cloud Service to multiple instances

Hello folks,
Currently, I have Windows Azure Cloud service on one instance, if I move to multiple instances, will Azure deploy it to all instances during the time of deployment? Basically, the fact that there are multiple instances behind the Cloud Service will be transparent
to the whole deployment process, is that a correct understanding?
Thanks

Hi,
From my experience, all the instances in one cloud service were the same, and we just focus on the application and not the infrastructure. Refer to
http://www.windowsazure.com/en-us/services/cloud-services/ for more information.
Best Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

After downloading i-clouds I keep receiving a no service message and could not activate iphone. it says the iphone could not be activated because the activation server is temporarily unavailable. i have read several threads with the same but no solution

after downloading i-clouds I keep receiving a no service message and phone could not be activated because the activation server is temporarily unavailable.
I have read several questions on this but dont see a solution.

Activation requires a SIM, assuming the SIM is functional it should simply activate.
The vast majority of activation issues are the result of devices that have been hacked or jailbroken. If that is the case, no support can be provided here.

Monitor Cloud service instances

Hi,
I have two questions:
- is it possible to monitor the Cloud Service Instance past states, like when its restarted, and if this restart was from an error, in windows server i know it give the ability to create memory dump files, is this applicable in Azure, and if it is applicable
is it recommended ?
- in any way is it possible that Cloud service automatically roll bock it self and get an earlier version from the deployment, what i mean if we deployed a release 1.2 to cloud service and then after a few day we deployed release 1.4 is there any possibility
that the cloud service roll back last deployment and redeploy release 1.2 ?? consider that 1.4 release deployed and been stable for 2 -3 days.
Thanks,
Khalid Abdlqader.

Hi,
As far as I know, we could get the roll past state from azure operation logs, refer to
http://blog.ict.eu/2013/04/windows-azure-operation-logs/ for more information about the details, operation Logs is a Windows Azure Management portal feature which allows you to view historical
logs of all Create/Update/Delete (CUD) operations performed on your Azure services.
Please note, we usually define at least two instances of a role for that role running without downtime, if there are some issues in one of the role instances, Azure Fabric Controller will perform a roll back for this instance, and this issue
will be fixed automatic, details on Rollbacks can be found here:
http://msdn.microsoft.com/en-gb/library/windowsazure/hh472157.aspx#RollbackofanUpdate. If we do some change to this cloud service, such as redeploy a new version application, this cloud service will running with this new version, cloud service roll back
will not let this applicaiton reback to the old version, if we only do something in azure cloud service instance, after the roll back, the changes we have made will disappear.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do I tell my clients to configure the connectionstrings for a cloud service?

I have an application that exists in two forms
A Windows Service
A Clouse Service with a Web Worker Role
Both applications have an encrypted connection string in the app.config;
for clients using the Windows Service I know how to tell them to change the config file.
For a cloud service is it possible to edit the configuration file?
I read something about Azure Settings, but I can't find any good information about that, is that the preferred method for setting environment settings in a Cloud Service?
Can you remote in to a VM or whatever hosts the Cloud Service?
Thank you for any help. I am writing the documentation about how to setup the Azure environment and I realized I don't know myself, I only know how to publish with Visual Studio to a cloud service with the values already set. That works, but I can't
tell a client to use Visual Studio.

Hi,
For a cloud service, though it is possible to access instance VMs and do changes on their file system by RDP sessions, but it is not recommended, as you will end up loosing your changes if role instance VMs are restarted.
If you really want to keep certain settings configurable and which will be shared by all your role instances, best way to do is to utilise the cloud service configurations, typically you mention these settings in .cscfg file and you can also edit those using
azure management portal.
You can also access those from your code
string settingValue = CloudConfigurationManager.GetSetting("SettingString");
Read more about it here - http://msdn.microsoft.com/en-us/library/azure/ee405486.aspx
http://haishibai.blogspot.in/2012/09/windows-azure-cloud-service.html
Bhushan | Blog |
LinkedIn | Twitter

Managing connection strings Azure Cloud service deployment

I have an azure cloud service project which comprises of one worker role and one web role. I need to have both staging and live deployments but I need them to have different connection strings because the worker role generates lots of data which is reported
by the web application and I would not want to have test data in production.
What's the best way to configure this so that I can quickly swap or promote from staging to live and have the connection strings just update without having to republish from visual studio using a different configuration.

Hi,
Two ways to do it -
1. Keep your connection strings in cscfg so that you can change those on the fly after the deployment using azure management portal.
2. Keep connection string in the web configuration file at the time of deployment and have cscfg settings which can override those i.e. re-write those in the web configuration file when role instances are restarted.
I too experienced something similar to this but not for connection strings, it was for ACS i.e. authentication settings which I needed to have differently on both deployment slots, refer my blog post http://passionatetechie.blogspot.in/2014/02/moving-acs-settings-in-cloud.html you
can do similar for connection strings of your application.
Bhushan | < href='http://www.passionatetechie.blogspot.com'>Blog | <a href="http://in.linkedin.com/pub/bhushan-gawale/29/327/405"> LinkedIn</a> | <a href="http://twitter.com/BhushanGawale">Twitter</a>

Cloud service web role did not get request

Hi Team,
we have an application host in web role in a cloud service,
sometimes it keeps loading when clicking a button in GUI and got no response till our GUI timeout (30 minutes)
we use Fiddler to trace the http request and also check IIS logs and found that sometimes the web role didn't get a request, sometimes the IIS
got the request and finished to processe the request but didn't return result to GUI.
it seems the message lost during interaction between UI and web role.
note that this problems comes out just recently.
is there some known issues related with this kind of problems.
thanks in advance.

hi Baker,
Firstly, I need confirm what's meaning is GUI from your description ? The GUI is your cloud service project UI? Or your UI in your client?
Secondly, base on my experience, we usually could occur timeout error because of the azure load balancer and the long time request.
For this error, I recommend you refer to those thread:
Azure Web Role - Long Running Request (Load Balancer Timeout?)
Windows Azure Load Balancer TimeOut for Cloud Service Roles (PAAS Web/Worker)
Windows Azure Load Balancer Timeout Details
http://social.msdn.microsoft.com/Forums/windowsazure/en-US/89b283f0-dfca-49a7-99fe-c3b73d77ff6d/azure-load-balancer-sending-http-request-to-multiple-web-role-instances?forum=windowsazuredevelopment
If I misunderstood, please let me know.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

User does not have access to the Cloud Service Type

Where do it edit the access the the user? How do i fix this problem?
"messages" :
"hint" : "User 'DBAAS' does not have access to the Cloud Service Type 'dbaas' resource interaction with method 'POST' on accept type 'application/oracle.com.cloud.common.DbPlatformInstance' and content type 'text/plain'" ,
"stack_trace" : "oracle.sysman.emInternalSDK.ssa.cloudapi.CloudSecurityException: User 'DBAAS' does not have access to the Cloud Service Type 'dbaas' resource interaction with method 'POST' on accept type 'application/oracle.com.cloud.common.DbPlatformInstance' and content type 'text/plain'\n\tat oracle.sysman.emInternalSDK.ssa.cloudapi.EMCloudServlet.routeToServiceType(EMCloudServlet.java:180)\n\tat oracle.sysman.emInternalSDK.ssa.cloudapi.EMCloudServlet.perform(EMCloudServlet.java:235)\n\tat oracle.sysman.emInternalSDK.ssa.cloudapi.EMCloudServlet.performPost(EMCloudServlet.java:385)\n\tat oracle.sysman.emInternalSDK.ssa.cloudapi.rest.AbstractRestServlet.doPost(AbstractRestServlet.java:137)\n\tat javax.servlet.http.HttpServlet.service(HttpServlet.java:727)\n\tat javax.servlet.http.HttpServlet.service(HttpServlet.java:820)\n\tat weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)\n\tat weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)" ,
"text" : "Could not route to the Cloud Service Type 'dbaas'. The exception stack trace should provide some information about the reason of the failure" ,
"date" : "2012-12-04T12:27:11+0000"
}

I'm trying to create a new DbPlatformInstance using the EM12c Cloud API but i keep getting an error "User 'DBAAS' does not have access to the Cloud Service Type 'dbaas' resource interaction with method 'POST' on accept type 'application/oracle.com.cloud.common.DbPlatformInstance'
Below are the request and response.
REQUEST:
POST /em/cloud/dbzone/D7EEE339C1249F83FC4587C722EB20B5
Authorization: Basic xxxxxxxxxx
Content-Type: application/oracle.com.cloud.common.DbPlatformInstance+json
Accept: application/oracle.com.cloud.common.DbPlatformInstance +json
     "name" : "Database 11.2.0.3.0 Instance for SSA_USER_1",
     "description" : "Instance 2 of Oracle Database 11.2.0.1.0" ,
     "based_on" : "/em/cloud/dbplatformtemplate/B59EDC65951039E8E040E50A8F5B0435",
     "params" : { "username": "xxx", "password" : "yyy" }
RESPONSE:
Response Headers:
Status Code: 403 Forbidden
Connection: Keep-Alive
Content-Language: en,en-us
Content-Type: application/oracle.com.cloud.common.Messages+json; charset=ISO-8859-1
Date: Tue, 04 Dec 2012 14:38:08 GMT
Keep-Alive: timeout=5, max=100
Server: Oracle-Application-Server-11g
Set-Cookie: ORA_SMP_EM_AUTH_-4568676491231894381=52W7Q2KQ5w5FTn8MQYrZ3Hqp5QnqBLkNwVKvHSS728pMzyQpxJpd!352643837; path=/em; secure; H ttpOnly
Transfer-Encoding: chunked
X-ORCL-EMOA: true
X-Oracle-DMS-ECID: 004o0VGXIE08XrqpKK4Eye0001P_00009q
X-Powered-By: Servlet/2.5 JSP/2.1
x-specification-version
Response Body:
"messages" :
"hint" : "User 'DBAAS' does not have access to the Cloud Service Type 'dbaas' resource interaction with method 'POST' on accept type 'application/oracle.com.cloud.common.DbPlatformInstance' and content type 'text/plain'" ,
"stack_trace" : "oracle.sysman.emInternalSDK.ssa.cloudapi.CloudSecurityException: User 'DBAAS' does not have access to the Cloud Service Type 'dbaas' resource interaction with method 'POST' on accept type 'application/oracle.com.cloud.common.DbPlatformInstance' and content type 'text/plain'\n\tat oracle.sysman.emInternalSDK.ssa.cloudapi.EMCloudServlet.routeToServiceType(EMCloudServlet.java:180)\n\tat oracle.sysman.emInternalSDK.ssa.cloudapi.EMCloudServlet.perform(EMCloudServlet.java:235)\n\tat oracle.sysman.emInternalSDK.ssa.cloudapi.EMCloudServlet.performPost(EMCloudServlet.java:385)\n\tat oracle.sysman.emInternalSDK.ssa.cloudapi.rest.AbstractRestServlet.doPost(AbstractRestServlet.java:137)\n\tat javax.servlet.http.HttpServlet.service(HttpServlet.java:727)\n\tat javax.servlet.http.HttpServlet.service(HttpServlet.java:820)\n\tat weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)\n\tat weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)" ,
"text" : "Could not route to the Cloud Service Type 'dbaas'. The exception stack trace should provide some information about the reason of the failure" ,
"date" : "2012-12-04T14:38:09+0000"
}

Cloud service auto scale delay

Hi team,
We have a cloud service that have 10 worker roles, to let the cloud service can auto scale up/down, we configure the autoscale settings that if the average CPU reaches 70% and keeps last 30 minutes, new worker role instance will be created.
We also configure a email notification monitor that if the worker role average CPU reach 75% and keeps last 30 minute it will send a notification to our administrator, we receivce the notification at 2015/1/26 0:55 and 1 hour later the instances ware scaled
up, is that means the autoscale have been delayed about 1 hour , is there some best practise that avoid this kind of problem and let the instances can be scaled up immeditatly
thanks in advance.

Hi,
Please have a look at this article:
http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-scale/, here is a snippet.
All instances are included when calculating the average percentage of CPU usage and the average is based on use over the previous hour. Depending on the number of instances that your application is using, it can take longer than the specified wait time
for the scale action to occur if the wait time is set very low. The minimum time between scaling actions is five minutes. Scaling actions cannot occur if any of the instances are in a transitioning state.
Hope this helps.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Cloud service stuck transitioning for too long after swap

To speed up deployment during development i swap the production and staging and then do a web publish directly to the staging environment. Then I swap back. The whole operation takes a few minutes instead of the 20 or 30 required to do a full
deployment.
This used to work fine but lately when i do the first swap the management portal keeps on saying transitioning - sometimes for 30 minutes or more!
it appears that the swap is failing but the management portal won't reset..
<SubscriptionOperation xmlns="http://schemas.microsoft.com/windowsazure" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<OperationId>XXXX</OperationId>
<OperationObjectId>XXX</OperationObjectId>
<OperationName>SwapDeployment</OperationName>
<OperationParameters xmlns:d2p1="http://schemas.datacontract.org/2004/07/Microsoft.WindowsAzure.ServiceManagement">
<OperationParameter>
<d2p1:Name>subscriptionID</d2p1:Name>
<d2p1:Value>XXX</d2p1:Value>
</OperationParameter>
<OperationParameter>
<d2p1:Name>serviceName</d2p1:Name>
<d2p1:Value>XXX</d2p1:Value>
</OperationParameter>
<OperationParameter>
<d2p1:Name>input</d2p1:Name>
<d2p1:Value><?xml version="1.0" encoding="utf-16"?><Swap xmlns:i="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/windowsazure"><Production>dfcb976a3c924cdab8ed96136a8218e2</Production><SourceDeployment>11d281eecbff4a28b740592738a42910</SourceDeployment></Swap></d2p1:Value>
</OperationParameter>
</OperationParameters>
<OperationCaller>
<UsedServiceManagementApi>true</UsedServiceManagementApi>
<UserEmailAddress>XXX</UserEmailAddress>
<SubscriptionCertificateThumbprint />
<ClientIP>XXXX</ClientIP>
</OperationCaller>
<OperationStatus>
<ID>eXXX</ID>
<Status>Failed</Status>
<HttpStatusCode>500</HttpStatusCode>
<Error>
<Code>InternalError</Code>
<Message>The server encountered an internal error. Please retry the request.</Message>
</Error>
</OperationStatus>
<OperationStartedTime>2015-02-07T16:30:56Z</OperationStartedTime>
<OperationCompletedTime>2015-02-07T16:51:12Z</OperationCompletedTime>
<OperationKind>PromoteToProductionOperation</OperationKind>
</SubscriptionOperation>

Hi,
The operation log only shows us a general error message 'The server encountered an internal error. Please retry the request', please try to swap again, if it doesn't help, please try to create a new cloud service to do this.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SSL and custom domain configuration for cloud service

Hi,
I am doing custom domain mapping and SSL configuration for a cloud service web role. Another important aspect is Cloud service web role uses ADFS in between for authentication.
I have custom domain mapped, SSL uploaded on cloud services Certificates
tab in management portal, certificate .pfx and chaining certs .CER are added as below -
<Certificate name="UATCert" thumbprint="A" thumbprintAlgorithm="sha1" />
<Certificate name="Certificate1" thumbprint="B" thumbprintAlgorithm="sha1" />
<Certificate name="Certificate2" thumbprint="C" thumbprintAlgorithm="sha1" />
I see these certificates getting added properly to Azure cloud service web role instance VM.
The problem is, when I access the custom domain,
https://mysite.com/default.aspx in the browser ultimately after ADFS login I see
https://cloudservice.cloudapp.net/default.aspx. My understanding is, cloudapp.net should not be seen in the browser to the client. Also I keep getting error of certificates stating "There is
a problem with this website’s security certificate" when browser shows cloudapp.net url.
How can I avoid display of cloudapp.net in browser and show only custom domain Url. Also how can I avoid this certificate error ?
Thoughts?
http://sanganakauthority.blogspot.com/

Hi kunal,
Based what you described, I understand that you want to use the custom domain for cloud service web role and apply azure active directory authentication to the web role application.
>>>The problem is, when I access the custom domain,
https://mysite.com/default.aspx in the browser ultimately after ADFS login I see
https://cloudservice.cloudapp.net/default.aspx.
As for above issue, I think you should make sure you have registered the web application in azure AD both "SIGN-ON URL" and "Reply URL" are
https://mysite.com/default.aspx
>>>Also I keep getting error of certificates stating "There is a problem with this website’s security certificate" when browser shows cloudapp.net url.
Try to upload a valid certificate (provided by CA) to cloud service for your custom domain.
Best Regards,
Fuxiang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Unable to connect to VM's in new cloud service via express route

We have changed our express route setup, initially we had an express route via London, but we have added a second one via Amsterdam and removed the one via London. All existing and new vm's in the different vnet's have connection to our local datacenter,
but as soon as we create vm's in a new cloud service the published routes don't seem to be picked up and the machine are only reachable in their local vnet on azure.
Does anyone have an idea where to look, it looks like the route publishing does not seem to work correctly, but it is strange that new vm's in existing cloud service do work correctly. BGP peering and vnet have been provided access via the expressroute and
all have status provisioned.

Hi Syed,
When I try to connect to a new vm via rdp or try to do a tracert to the machine (with firewall turned off on the vm) I don't get a response (traffic is routed via the express-route correctly). If I do a tracert to an ip on the on premise network
from the vm in question the trace is directed to internet instead of to the on premise network via the express route.
the new cloud services were created in the same region as the working cloud services and the vm's are also in the same vnet/subnet as the working vm's. If I delete a vm (keeping the disks) from a new cloud service and redeployed it in an existing cloud service
I can reach it again via the internal ip.
We have checked the route publishing and the correct routes are published to the express route/vnet.
When I check the provisioning of the vnet's via get-azurededicatedcircuitlink all the vnet's in question are listed as provisioned.
I'll try to remove the bpgrouting for the original expressroute this evening to see if that helps.
kind regards
Xander

Error while deploying adf application on oracle cloud service

hello, i hv registered oracle cloud service for java and database. i hv created simple adf application in which there are 2 jsf pages only linked together. I m using oracle jdeveloper 11gr2. so i hv created ear file for deployment on cloud. i deployed adf application on cloud using java console. But, after uploading application, deployment was failed. I tried 3 times this, but the result was same. I checked log, where i got 3 warnings in whitelist log and error in deploy log. Those are as follows:
Warnings in whitelist log:
2013-04-14 06:57:11 CDT: Starting action "API Whitelist"
2013-04-14 06:57:11 CDT: API Whitelist started
2013-04-14 06:57:12 CDT: WARNING - There are 3 warnings(s) found for Testapp.ear.
2013-04-14 06:57:12 CDT: WARNING - Path:Testapp.ear (3 Warnings)
2013-04-14 06:57:12 CDT: WARNING - Path:Testapp.ear (3 Warnings)
2013-04-14 06:57:12 CDT: WARNING - Path:Test_ViewController_webapp.war (3 Warnings)
2013-04-14 06:57:12 CDT: WARNING - Path:WEB-INF**** (1 Warning)
2013-04-14 06:57:12 CDT: WARNING - 1:Recommended child element "login-config" missing under element /
javaee:web-app.
If you want to make your application public, you can have empty
<login-config/> in your web.xml. If you need authentication then you must
have <login-config> and its child <auth-method> element in web.xml.
Without this element(<login-config>), users may be challenged by SSO, but
the application code will be executed as anonymous user only. Line No:4.
2013-04-14 06:57:12 CDT: WARNING - Path:WEB-INF**** (2 Warnings)
2013-04-14 06:57:12 CDT: WARNING - 1:Recommended child element "jsp-descriptor" missing under element /
orcl-weblogic:weblogic-web-app.
If you have a JSP file that is not pre-compiled, The compilation errors
could be shown on the browser. It is recommended to include
<jsp-descriptor><verbose>false<****><****-descriptor> in weblogic.xml.
Line No:2.
2013-04-14 06:57:12 CDT: WARNING - 2:Recommended child element "session-descriptor" missing under element /
orcl-weblogic:weblogic-web-app.
You will be required to have distinct cookie-path, if multiple
applications are accessed with in the same SSO session or if you have
multiple applications with different auth-method(CLIENT-CERT, FORM, BASIC)
in the same service instance.
Line No:2.
2013-04-14 06:57:12 CDT: WARNING - Testapp.ear had 3 warning(s).
2013-04-14 06:57:12 CDT: INFO - Whitelist validation has completed with 0 error(s) and 3 warning(s).
2013-04-14 06:57:12 CDT: Whitelist validation passed.
2013-04-14 06:57:12 CDT: "API Whitelist" complete: status SUCCESS
and Error in deploy log:
2013-04-14 06:57:12 CDT: Starting action "Deploy Application"
2013-04-14 06:57:12 CDT: Deploy Application started
2013-04-14 06:57:15 CDT: weblogic.application.ModuleException: Failed to load webapp: Test-ViewController-context-root because of DeploymentException: java.lang.ClassNotFoundException: oracle.adf.view.faces.bi.webapp.MapProxyServlet
2013-04-14 06:57:15 CDT: WL action state: failed
2013-04-14 06:57:15 CDT: Action FAILED with WL action state: failed
2013-04-14 06:57:15 CDT: Check the server log of your Java cloud service for more info about the failure.
2013-04-14 06:57:16 CDT: Application deployment failed.
2013-04-14 06:57:16 CDT: "Deploy Application" complete: status FAILED
I am using jdeveloper 11gr2, so pls dont tell me to use jdeveloper 11gr1. because, i hv already developed an application for my final year B.Tech and i cant migrate to previous release. So there is only one way for me by generating ear file and deploying from console.
So,
I m not getting what is the problem and what will be solution for this?
What should i do?
What changes should required?
pls, help me to get out from this problem !!!!!

Well, I guess you have a problem here. Check http://multikoop.blogspot.de/2012/12/deploying-adf-applications-into-oracle.html and from this
>
Note: In its current stage Oracle Java Cloud Service runs WebLogic Server 10.3.6 with the appropriate Runtime ADF 11.1.1.6. Deployment of ADF 11gR2 Applications is currently not supported. Beside this limitation some ADF Features are not supported on the Oracle Cloud. According to the Oracle Cloud Documentation it is not supported to use the following ADF features
ADF Desktop Integration
ADF mBean
ADF MDS (Seeded customizations or cross-session personalization)
ADF Mobile
ADF Active Data Services (=> No real-time ADF Web Apps in Oracles Cloud)
ADF Business Components services interfaces (web services) or events
ADF Data Controls for BI, Essbase, BAM, and JMX
Further there are some restrictions which are good to know I think
No Java Mail API (=>Sending Mails is prohibited)
No File system access by deployed applications (=>Writing files is prohibited)
No Direct use of Oracle JDBC Driver APIs
No Java Message Service (JMS)
Max Size for deployment archive 95MB
>
I hope for you that the information from the blog has changes in the meantime (blog is from end of last year). Check the current doc for the cloud ...
Timo

Cloud Service: Powershell Error while waiting for Role to Start

Hi,
I have the below code when trying the deploy a cloud service with Powershell using New-AzureDeployment.
How can i get over this. This happens every once in say five instance of deployment.
System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.N
et.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected ho
st has failed to respond xx.xxx.xxx.xxx:443
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult,
Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
--- End of inner exception stack trace ---
at Microsoft.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at Microsoft.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccess(Task task)
at Microsoft.WindowsAzure.Management.Storage.StorageAccountOperationsExtensions.Get(IStorageAccountOperations operations, String accountName)
at Microsoft.WindowsAzure.Commands.Common.Storage.StorageUtilities.GenerateCloudStorageAccount(StorageManagementClient storageClient, String accountName)
at Microsoft.WindowsAzure.Commands.Utilities.Common.WindowsAzureSubscriptionExtensions.GetCloudStorageAccount(AzureSubscription subscription)
at Microsoft.WindowsAzure.Commands.Storage.Common.StorageCloudCmdletBase`1.GetStorageAccountFromSubscription()
at Microsoft.WindowsAzure.Commands.Storage.Common.StorageCloudCmdletBase`1.GetCmdletStorageContext()
Thanks,
Pradebban Raja

Hi,
Please have a check on the below blog and check if it helps.
http://blogs.msdn.com/b/narahari/archive/2011/12/21/azure-a-connection-attempt-failed-because-the-connected-party-did-not-properly-respond-after-a-period-of-time-or-established-connection-failed-because-connected-host-has-failed-to-respond-x-x-x-x-x-quot.aspx
Regards,
Mekh.

Instance in cloud service keeps unhealthy

Similar Messages

Maybe you are looking for