Instrument I/O Assistant installation incomplete...Student Edition 7.1

I'm using LabVIEW 7.1 Student Edition, and I can't seem to get the Instrument I/O Assistant to work. The student edition doesn't come with the Drivers CD, so I got the I/O Asst from ni.com. After reading some other posts I uninstalled the I/O Asst from the Add/Remove programs, then reinstalled, but it still didn't work.
Am I running into the limited functionality of the student edition?

The Instrument I/O Assistant vis are only installed from the Driver CD, within the Driver CD, you will see a separate installer for the Instrument I/O Assistant(iioa), run the installer from there.
For more details, check the KnowledgeBelow:
http://digital.ni.com/public.nsf/websearch/AA99FA8704D5E22686256D6A004464ED?OpenDocument

Similar Messages

  • N'arrive pas à installer Labview student edition

    Bonjour,
    J'essaie actuellement d'installer Labview 8.2 student edition. Au début de l'installation on me demande logiquement le numéro de série; sauf que sur l'étiquette que je possède je n'ai que deux numéros:
    - 1 suivant P/N composé de 6 chiffres, une lettre, un tiret, puis deux chiffres
    - 1 suivant S/0: composé de 6 chiffres
    Ces deux numéros ne marchent pas... Comment dois je procéder?
    Merci

    Même problème lorsque j'essaie d'installer sans entrer de numéro de série; il m'indique que mon numéro n'est pas juste...
    Message Edité par Romain ANNECY le 05-18-2010 04:36 AM

  • LabVIEW 2011 Student Edition on Mac Installation

    Hi
    I installed LabVIEW 2011 Student edition on my Mac with the OS Mac OSX Version 10.7.1 Lion edition.
    At first it wouldn't install (I had installation failure because Lion OSX is 64 bit and not 32)
    I used the intructions as demonstrated in the link http://support.apple.com/kb/HT3773
    as I found in the forum thread of: 
    http://forums.ni.com/t5/LabVIEW/Installing-LabVIEW-2011-for-Mac-OS-X-10-7-Lion-fails/m-p/1653742?req...
    After I changed to 32 bit, the apple terminal warned me by doing so I wouldn't be able to save stuff correctly.
    The software installed after I used the directions for 32 bit mode, but for some reason it did not say I was in 32 bit mode on the Apple activity monitor, it said 64 bit.
    I went to the terminal and used the instructions to turn the operating system into 64 bit (even though it already say it was in 64 bit, despite LabVIEW installing, which requires 32 bit). I rebooted the computer, and I was able to use LabVIEW 2011.
    My question:
    Once LabVIEW 2011 Mac student edition is installed in 32 bit mode, can it be operated when the computer is in 64 bit mode?
    thanks
    Solved!
    Go to Solution.

    Hi JoeGanser,
    Booting your Mac into OSX 64 bit should still enable LabVIEW to run, even though it is a 32 bit program. You will encounter problems however when using NI-DAQmx Base, NI-VISA or NI-488.2 drivers while running in 64 bit mode.
    I have found a KnowledgeBase Article, which explains why this is the case.
    Please let me know if that answers your question, please post back if you have further questions.
    Regards,
    Ben B.
    Applications Engineer
    National Instruments UK & Ireland
    "I've looked into the reset button, the science is impossible!"

  • Labview 2009 Student Edition Vista x64 installation fail, no error messages though

    I am trying to install a copy of the LabView 2009 student edition and everytime the installation initializes, the modules fail to install for every single module.  There is also no error message.
    I got a message that LabView may not be working correctly due to Windows Firewall, which I have disabled. That message referred me to ni.com/info, code expm69.
    Let me know, I'm a little confused as to what's going on.  Would it be due to a patch or what not?
    Thanks!
    Solved!
    Go to Solution.

    Hi imagineerme, 
    Regarding your installation issues, a possible cause may be that you don't have permissions on the computer that you are installing. Are you set as the administrator on this computer? Is this a school computer or your own? 
    It's also possible that LabVIEW may be installed on your computer already. To check this, go to Program Files/National Instruments to see what you already have installed. 
    If neither of these are the cause, can you please provide me with more information about your installation? Does the installer crash or just go straight to the finish screen? Does anything install at all? Thanks and best of luck, 
    Julianne K
    Julianne K
    Systems Engineer, Embedded Systems
    Certified LabVIEW Architect, Certified LabVIEW Embedded Systems Developer
    National Instruments

  • Installation of Lab view 8.20, DAQ Assistant has disappeared & Instrument I/O Assistant cant be used

    After upgrading to Lab view 8.20 and on a 8.20 new install I
    notes’ that
    DAQ Assistant has disappeared from the tool pallet completely.
    Also that Instrument I/O Assistant cant be used or
    configured and produces an error
    “NI Measurement & Automation Explorer or the Instrument
    I/O Assistant is not correctly installed. Please install these from the Driver
    CD”
    I have checked both of these and all parts are fully installed
    and I cant fined what part of the Full version of Labview would course this
    problem.
    Would a completely new installation with default settings
    clear the problem, what has coursed these tools to be not avalible.

    Hi Trevor
    You need to load on the Drivers for DAQmx, if you have a CD you can load them on from there otherwise the link to download NIDAQmx 8.3 is:
    http://digital.ni.com/softlib.nsf/websearch/7feaee6a4b4aa836862571c00064e6ca
    There is a order in which you must load things on for everything to work correctly,
    LabVIEW --->> Modules & Toolkits --->> Drivers
    This should solve your issue
    YatinM
    NIUK

  • CS4 Design Premium Student Edition will not even begin the installation process

    Help!
    I have bought CS4 Design Premium Student Edition, I received the serial number okay, tried the installation process but stupidly hadn't quit a programme fisrt. I tried the process again but the SetUp window says 'Loading SetUp' and I get an 'Installer Alert' window pop up with nothing in it. I can't quit the Installer and have to Force Quit.
    I've tried the CS4 Clean Script and it finds nothing to remove. Having spoken to Tech Support I tried CS3 Clean Script and it removed certain items, but the CS4 disc still won't work.
    I have Photoshop 7 installed, would that be interfering?
    What else can I remove before re-trying the installation of CS4?

    I have tried shutting down and restarting and just a simple restart.
    The guy from tech support didn't tell me to do that when I was trying the clean script stuff the other day but I've tried it sonce and there's still no joy.
    Does it sound like I've got something preventing the installation process from starting if I get a blank 'Installer Alert' window appear?
    Calling Adobe Support is such a pain. No answer for hours....

  • Installation CS5 Extended (Student Edition) Window 8.1

    Installation of CS5 Extended (Student Edition) (bought in 2012) --> possible to install on a new Window 8.1 computer?

    The computer where CS5 Extended (Student Edition) was installed on (Windows Vista) needs to be replaced. I was not sure if the student version of Photoshop CS5 extended could be installed on a windows 8 computer. I only asked to avoid problems.
    Thank you for the answer.

  • Student Edition CS6 dual installation

    Does the $449.99 Student Edition of CS6 allow you to install it on 2 separate Macs? If so, then is the installation process the same as on the first machine?

    Yes and yes. All Adobe apps have 2 activations and thus can be installed and activated on 2 machines for non-concurrent use.
    Mylenium

  • Damaged Installation DVD for CS 3 Design Premium Student Edition

    I did a fresh install of snow leopard on my mac only to find out that my installation DVD for my student edition of CS3 Design Premium is damaged. Is there any mechanism to replace / purchase a new one without purchasing a new license?

    Call Customer Service for your country. They can arrange for you to purchase replacement disk(s).

  • Installing CS4 student edition onto a new macbook pro

    I have just bought a macbook pro (which doesn't have a disc drive) and am wanting to install my student edition of CS4 onto it.
    As advised by adobe I have copied the installation CDs onto a USB and have then copied them onto my new macbook to try and install it that way.
    I can install the first disc fine, but then it asks for me to insert disc two - when i open the copied file from disc two nothing happens ... anyone know how to get around this/make it work!
    I have seen on another thread that you can install the trial versions of cs4 and then input your serial number to activate them but I don't know if this will work woth the student edition?
    (I had first tried to install CS4 onto my new laptop using the migration assistant, but it must have corrupted the files, that when i spoke to adobe and they told me to do try installing using USB)

    The only difference between student editions and others is the license... the software is the same. 
    As you mentioned, you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    CS3 and CS4:
    http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

  • Instrument I/O Assistant not properly installed

    Hi,
    I recently purchased a student edition of Labview 2009 and I've been having problems with the intrument I/O Assitant. Each time I place it on the block diagram I get the error message that it was not properly installed. I've searched the knowledge bases and carried out the recommended remedies to no avail. I downloaded drivers from NI.com, uninstalled NI VISA and reinstalled the its latest version still nothing worked. Can someone please help me out here.
    Thanks

    Hello,
    I see that you uninstalled and reinstalled the drivers, but did you make sure to only reinstall the Instrument Assistant after the drivers? Also, what operating system and driver versions are you using?
    -Zach
    Certified LabVIEW Developer

  • LabVIEW 8.5 - error: M&A Explorer or Instrument I/O Assistant is not installed correctly: what to do?

    Dear NI creators and users,
    I freshly installed the LabVIEW 8.5 and the default set of device drivers (on a new Windows XP machine), all of which I downloaded as disk images from our university central repository (we have a site-wide license). The first thing I tried to place in my first VI was the "Instrument I/O Assistant" and I got this message: "Measurement and Automation Explorer or Instrument I/O Assistant is not installed correctly. Please install these from the LabVIEW Driver CD." I tried to repair the installation, but no change. The M&A Explorer comes up fine, when I select it from the Tools menu, so I doubt, that the problem is there. Needless to say, the "Instrument I/O Assistant" throws the same error when double-clicked in the template file.
    Does anybody have a similar or the same experience? What can I do to solve this problem? Perhaps I should add that the computer with LabVIEW is intentionally not connencted to the internet, so in case the solution involves an update, I would very much appreciate some guidance to an off-line update
    Many thanks to all for any helpful remarks.
    Daniel
    Solved!
    Go to Solution.

    Hi Daniel,
    the following knowledge base contains some information how to troubleshoot: 
    http://digital.ni.com/public.nsf/allkb/DC808866AF7D5C0986256FCE006E9BAB?OpenDocument 
    Maybe you didn't install the NI-VISA or NI-488.2 driver. 
    I wish you Merry Christmas and a Happy New Year.
    With best regards 
    Ralf N.
    Applications Engineering
    Germany 
    PS:
    If that wouldn't work for you, download the latest driver-CD from our website and install it. ( It may take a while.  )
    http://joule.ni.com/nidu/cds/view/p/id/1079/lang/de 
    I'd recommend to use an USB-harddisk for transferring the files.  
    Message Edited by ralfn on 12-23-2008 02:29 AM

  • Reinstalling student edition cs4 without serial number

    im having trouble reinstalling my student edition of adobe cs4, bought back in 2009.... it asks for a serial number i dont have. i have given customer service a coupon number and case number but they still cannot assist me with proof of purchase... what to do??? i am legitimate

    Thanks milenium. Yes I know I had it once. Back then I didnt even know how to turn my computer on so I payed an IT guy to do the whole installation.  I do recall having something on the box but didnt keep it. All I have is a coupon number and and case number that I was told to keep which isnt helping. Im out of ideas.can someone please help me..  I just got a new computer from parents for xmas and cant do any work without this installation. How else can I prove it?

  • Student Edition

    I recently got a cd of the student version of LabView 8.6.  I am trying to use a USB-6008 DAQ, and wrote a program on another computer that uses the DAQmx read and write functions.  For some reason my student edition does not have these functions, or the DAQ Assistant.  Also, instrument I/O Assistant doesn't work.  I have the DAQmx 8.6 software that came with the DAQ installed.  Is there something else I need to download?

    Are you sure you installed the DAQmx drivers after installing LabVIEW?
    You may also want to download the latest drivers from the NI website and install them.

  • PS CS3 Extended Student Edition disc won't upload onto Computer!

    I bought the PS CS3 Extended Student Edition and I have registered on the Adobe website to get my serial number which all went fine, but when I put the Disc in the drive, it does not appear on My Computer,Desk Top for me to open and upload photoshop to my computer! I have put the disc into another hard drive and attached it to my monitor but still nothing comes up! I have tried it on a completely different computer and it appears then, just not on mine! My computer seems to be working fine as I am able to upload other discs to it!
    Please can anyone help or has anyone had this problem in the past?
    Thanks
    Hayley

    When did this start? 3.3? I've been a regular educational buyer. The most recent we have is CS3.0 (the suite) and that came with the serial. Maybe it just depends on the educational vendor.
    I'm not doubting that Hayley has a legitimate license. But based on her terminology ('
    disc won't upload onto Computer', '
    put the disc into another hard drive') she may not be living in perfect harmony with computers. She may do well to snag the assistance of a fellow student to aid in the installation. They still have a good size population of 'nerds' in schools these days to choose from, right? :)

Maybe you are looking for