Integrate diffrent bw systems into new bw system

Hi ,
Thee are 3 BW/BI systems in my company for some years. Now we plan to combine the 3 BW systems into new BI System. for exp we have A, B , C BW systems( each system having BW 3.X And BI7.0 Objects) and each system having diffrent kind of Source ssytems(like R/3, FF, CRM) . Now we want to combine all these 3 (A,B,C) Systems into new One lets say D System.
So can any body suggest what approach need to take care before proceduring further . Do you have any document/suggestions for this kind of project?
Regards,
Fayaz

combine the 3 BW systems Into new BW System

Similar Messages

  • Combine the 3 BW systems Into new BW System

    Hi Frds,
    Thee are 3 BW/BI systems in my company for some years. Now we plan to combine the 3 BW systems into new BI System. for exp we have A, B , C BW systems( each system having BW 3.X And BI7.0 Objects) and each system having diffrent kind of Source ssytems(like R/3, FF, CRM) . Now we want to combine all these 3 (A,B,C) Systems into new One lets say D System.
    So can any body suggest what approach need to take care before proceduring further . Do you have any document/suggestions for this kind of project?
    Very appreciate your inputs
    Regards,
    ali

    integrate diffrent bw systems into new bw system

  • How to integrate a BW System in a XI Landscape?

    Hi Everybody..
    which are the steps that I need to perform in order to integrate a BW System in a XI Landscape?
    Thanks
    FedeX

    Hi Great links thanks...
    I do not how can get focused for going forward...
    <b>My Goal</b>
    I want to test a XML Data Source for a BW System
    <b>The Guide</b>
    The sample that I am following has some requirements...
    <i>1. Prerequisite
    The BW is integrated to the XI landscape.
    If this is not yet the case, follow the configuration guide
    of XI which you find here: SAP Service Marketplace
    ( http://service.sap.com/instguides )</i>
    That link does not point out a documente .. is a site with charges of information
    <b>The Situation</b>
    BW is definitively no integrated and I need to integrated it to go further with my test
    <b>How</b>
    I need a document or a guide or a link   which describes step by step How can one integrate a BW system to the XI Lanscape.
    where is that document in this ocean of information ?
    Thanks!!!
    Fedex

  • How to integrate with RMS system

    Hi experts,
      I want to integrate RMS(Retail Management System) with SAP PI system.
    Is it possible to integrate?
    If possible, Can you give me Idea How to integrate with this?
    Thanks & Regards,
    Poonam.

    > Want your more help. If I want to use SOAP adapter to integrate with RMS system.
    > So, what are the prerequisites are required in RMS system to be integrate with SAP PI through SOAP adapter?
    >
    Fist you have to make sure that RMS system showuld accept SOAP messages, that means u will send payload to RMS in the form of SOAP meesage using SOAP receriver Adapter.
    RMS system people have to provide URL , u will send data to address specified in URL.
    using Adapter is compmetely depend on Source or Taget system, betetr to talk with RMS system people like how they will take data from other systems,besed on that you can decided.
    Regards,
    Raj

  • How to integrate Solution Manager system to Enterprise Portal

    Hi all,
    HOW TO INTEGRATE SOLUTION MANAGER SYSTEM TO ENTERPRISE PORTAL SYSTEM

    Hi,
    First establish SSO between portal and solution manager.
    make the iview from com.sap.portal.epsolman.EPSolman
    check the link for help
    ep and solution manager support desk
    Thanks
    Santosh

  • How do I best integrate existing laptops for a new server?  Can I use the existing home folders on the laptops and make them into Network Users?

    How do I best integrate existing laptops for a new server?  Can I use the existing home folders on the laptops and make them into Network Users?

    Yes it will work.  I've done it for a few users in my small office.  As with anything, there are quirks that you may or may not experience.  Most quirks are app-related, due to app developers hard-coding absolute paths into their apps for things like temp files (Photoshop).  Strategies for resolving these sorts of quirks can be found via google.  You would probably have seen these quirks already when using server-based home folders for your kids.  If you haven't noticed them, then you're probably fine.
    The tech note you cited should be fine.  It doesn't explicitly say so, but you'll need to enable ssh on your server, at least temporarily, so you can upload your home folder to the server using scp, rsync, etc.  Don't try to copy the files up to the server via Finder.
    Once all your files are transferred to the server and in the right place, make sure to chown them on the server, so they are owned by the userID you created for yourself on the server.
    As with anything this involved, make a good backup of your laptop first.
    Note I have one user that isn't too happy with the responsiveness of the periodic mobile home syncing.  She has about a decade of e-mail in her home folder, probably 50 to 100 emails per day, many with attachments.  Mobile home syncing takes a long time to check and sync this huge tree of itty-bitty files, eevn with server-side file tracking turned on.  The other users are happy.
    The nice thing about mobile home syncing is that when a user "graduates" to an age where they've earned their own laptop, you can change them from a server home user to a mobile home user, with a minimum of fuss.  Also, if you lose or break a laptop, you can add a new replacement laptop to your network, and pull-down a replica of the home folder from the server, with almost no downtime.

  • Problems concerning "How to integrate MS Exchange Server into SAP EP"

    Hi,
    I want to realize the scenario in "How to integrate Microsoft Exchange Server into SAP Enterprise Portal" from the Microsoft-Website.
    We´re using SAP NetWeaver 04, SAP NetWeaver Portal 6.0.14.0.0 and KMC 6.0.14.2.0 and Microsoft Exchange Server 2000 SP3.
    I have created (as described in the document) the HTTP-System and a WebDAV RM. But the repository doesn´t appeaer in the KM-Content-iView.
    I checked the Component Monitor and got this error-message for "servers" (it was marked with a red square)
    last-error-3   2006-05-16T13:12:11Z: PROPFIND /public: 401 Access Denied
    last-error-4   2006-05-16T13:15:04Z: PROPFIND /public: 401 Access Denied
    last-error-6   2006-05-16T13:26:35Z: PROPFIND /public: 401 Access Denied
    errors   8
    last-error-2   2006-05-16T13:12:10Z: PROPFIND /public: 401 Access Denied
    requests   8
    last-error-7   2006-05-16T13:26:35Z: PROPFIND /public: 401 Access Denied
    bytes-per-second   0
    successes   0
    response-average   194
    last-error-1   2006-05-16T13:11:55Z: PROPFIND /public: 401 Access Denied
    last-error-0   2006-05-16T13:11:54Z: PROPFIND /public: 401 Access Denied
    last-error-5   2006-05-16T13:15:05Z: PROPFIND /public: 401 Access Denied
    failures   0
    Any idea, what´s wrong? And how to solve the problem.
    Thanks for help,
    Sven
    Message was edited by: Sven Keller

    Hi James,
    How can I check the KM ACLs/Security Zones?
    I had a look on "System Administration - System Configuration - Knowledge Management - Content Management - Repository Managers - Security Manager - WebDAV ACL Security Manager".
    There was just "WDAclSecurityManager" and the Permission Rendering Class was "com.sapportals.wcm.control.acl.ResourcePermissionControl".
    Or where do I have to look for the ACL?

  • Legacy data into new UCM Solution

    we are implementing new UCM solution to one of my client,
    Client is having lots of legacy data(>2TB), and they want to move the complete data into new UCM Solution?
    My question is, what is the way to convert the whole data in to UCM Content server?

    I assume that you are aware of the productised UCM Siebel integration...are you wanting to load legacy data and make it available through this? Even if you are the approach is much the same.
    OK so if on a file system then what you need to do is work out how you can derive metadata either from the directory structure OR the Siebel DB or the content itself - those are in order of difficulty and time taken I would say.
    The simplest thing to do is to use this information to create batchloader scripts. Why not try and create some test scripts where you load in 100 items or similar and see if the results/performance are aceptable.
    It will take a long time to load 2TB of data - how many separate files is this? So you may need to devise a schedule for doing this in a number of smaller migration runs.
    Tim

  • Integrate WebDynpro ABAP app into Portal

    Hi Experts,
    Can anyone tell me how to integrate the WebDynpro application into portal after developing in the R/3 System ?
    Thanks
    Suresh

    I got it . Thanks

  • One Transport request objects copy into new transport request

    Dear Experts,
    I created a transport request under which i saved my objects. <b>Now i need to  copy  old request objects into new request  or  split that transport request into number of new transport requests.</b>  First of all It is possible or not , if it is possible please tell  me the solution how to do.
    Regards,
    Krishna

    Hello Krishna
    You can
    (1) add object lists of already released requests ("old" requests) to you current request (still changeable)
    (2) merge changeable transport requests together
    (3) split a changeable request into several requests
    Whereas (1) and (2) are supported by standard functions of the SAP system (3) is a manual task involving the following steps:
    a.) Create a new request
    b.) Copy required transport entries (e.g.  R3TR TABL ZMYTABLE) from one request to the new request
    c.) Delete all copied transport entries from the object list of the "first" request
    However, if you are not fully aware of the dependencies between different transport object entries the splitting of object lists may cause hassle when you import the splitted requests into the next SAP system.
    Regards
      Uwe

  • Embedded hyperlink into new browser tab/window

      Hi Team,
    There is a requirement in my project for that, need to open embedded hyperlink into new browser tab/window, hyperlink is available in the pdf file which is open in browser (Internet Explorer).
    More than 2 lakh user is using the product so, there is any way to set the hyperlink target as a _blank so that the link open in new tab/window.
    Is there any adobe API is there which can support the above requirement?
    Is there any other way which can fulfill the requirement?
    End user is more than 2 lakh so, am not going to change the setting of Adobe reader as well as browser.
      Need your help to resolve the issues.
    Regards,
    Rupesh

    Yes, there is an API that is supposed to do this in the Web brower.  Does it work?  Not reliably is what I have found because different web browsers seem to interpret the way that Acrobat calls for a new window differently.
    launchURL
    7.0
    S
    Launches a URL in a browser window.
    Note:    Beginning with Acrobat 8.1, File and JavaScript URLs can be executed only when operating in a privileged context, such as during a batch or console event. File and JavaScript URLs begin with the scheme names javascript or file.
    Parameters
    cURL
    A string that specifies the URL to launch.
    bNewFrame
    (optional) If true, this method launches the URL in a new window of the browser application. The default is false.
    Returns
    The value undefined is returned on success. An exception is thrown on failure.
    Example 1
        app.launchURL("http://www.example.com/", true);
    Example 2
    Add an online help item to the menu system. This code should be placed in a folder-level JavaScript file, or executed from the JavaScript Debugger console.
        app.addMenuItem({
            cName: "myHelp", cUser: "Online myHelp",
            cParent: "Help",
            cExec: "app.launchURL('www.example.com/myhelp.html');",
            nPos: 0
    Related methods are openDoc and the Doc object getURL method.

  • Old AEBS(g) into new network

    Hi,
    I've recently replaced my wireless network in the house, to a Airport Extreme (n) connected to the internet and a Time Capsule (n) which extends the network. These two items have replaced my old Airport Extreme Base Station (white domed version, g). Rather than throwing out the now redundant Base Station, is it possible to integrate the old AEBS into the new network, to hopefully extend the network? OR, is there a combination of all three which will optimise the network?
    Thanks

    Query 1. Does the Ethernet cable from the TC to the old AEBS go from the Ethernet port to Ethernet port OR Ethernet port to WAN port.
    Since the AEBS will be in bridge mode, it won't matter which port (WAN or LAN) that you connect the TC to, but for consistency you can use the WAN port.
    Query 2. After connecting everything up and restarting, the two networks were visible from the drop down menu in the top left corner however I could only connect to the internet via the network created by the old AEBS. Any suggestions why?
    If the AEBS was configured as a bridge (Connection Sharing = Off (Bridge Mode)), then you should be able to connect to either network and still get Internet access. We may need to go over your configuration settings just to make sure everything is correct.
    Query 3. Under the Airport Express in the Airport Utility, why is there a tab called 'Base Station' when it's not being used as such?
    The "Base Station" tab is still relevant as this provides a means to configure the AirPort's base station name & administration password ... regardless on how it is being used.

  • Integration of old Blades into New new Fabric Interconnects

    Hi,
      I have a task where I am expected to:
    * Install Two new 6296 FIs., with two blade chassis and B200M3 Servers. These are all new equipment. All these equipment are at Location On3.
    * Add two existing Blade Chassis comprising of B200M2 Servers from Location two into this 6296 setup. These two blade chassis at Location two are presently with their own 6124 FIs. We need to migrate the logical configuration, into the 6296.
    * Add two more existing Blade Chassis comprising of B200M2 Servers from Location three into this 6296 setup. These two blade chassis at Location three are presently with their own 6124 FIs. We need to migrate the logical configuration, into the 6296.
    * However location two can be thought of as the present Prod environment and Location Three as DR.
    We need to have a minimum outage for Prod Site, as they are migrated from their present FIs to the new FIs.
      I have been contemplating the below for this migration.
    1- Install the new FI and blade chassis along with the Blades.
    2- Upgrade the Firmware to the level at Location One as at Location Two ( Location two code upgrade to the latest is complete for both Infra and Blades ).
    3- Restore a logical Config Backup from Location three to Location One.
    4- Restore a logical Config Backup from Location Two to Location One - I will allow Overwriting as applicable.
    Then I plan to tweak the configuration so that they can co-exist, mapping/configuring network and Storage ports.
    The new blades will be an extension of the logical setup at Location two, as much as possible.
    My questions:
    Is this a workable plan ? Meaning, I plan to physically move Location two and Location three equipment only upon restoring of the Logical Config Backups.  Are there any gaps that I hadn't discovered ? Any advice on this is much appreciated.
    Note I have intentionally overlooked the option of upgrading the location Two, 6124s 6296, for there is a physical movement involved for those blades.
    Thanks in Advance

    So, are you trying to integrate location 2 & 3 into a common location?  yes, a common new location, referred as location 1.
    Are locations 2 &3 running the same firmware level and are the new Fabrics already upgraded to the same firmware level of the 6120's currently working? Yes.
    If there is a third location where locations 2 & 3 will be integrated, is that location in the same data center/POD or the new location also involves moving to another physical location? No, it is a physically different data center
    Are you using UCS Central? No

  • Integrate Multiple BPEL Process into one project

    Hi,
    Can anyone help for the following problem?
    We created different BPEL process.One bpel process calls the another bpel process internally .
    EX:
    process1,process2 and process3.
    In side process1, I will call process2 and process3.
    I want to integrate all 3 process into one.
    Can anyone help how can i do this.
    Thanks in advance.
    Thanks,
    Bharath

    Can't you create a new process, copy everything between the main-scopes of the other processes to the new process (skip some of the receives and callbacks so you have 1 receive and 1 callback left), copy all the variables, namespaces, xsl mappings, and try again.
    it's more a bit of 'trial and error' and see what's left.
    Hope you can use this a bit.

  • How to copy existing query report into new query report in SQ00

    Hi Experts,
    Hi Experts,
    I want to add fields "company code" "'region" to existing  query report AQZZ/SAPQUERY/FKF1============
    (list of vendor address) for this i done as following:
    1.In SQ01  go to "EDIT->other user group" and i selected user group as /SAPQUERY/FK
    2.I typed F1 in query field and click change button
    3.I clicked next screen button and entered into "change query f1: select fields screen".here i clicked "basic list" button and searched company code checkbox and saved it as result company code is appearing in the standard report"AQZZ/SAPQUERY/FKF1============"
    but unfortunately there is no region field(LFA1-REGIO) for this i think i should copy the existing  query report  into new query report(Ex:Z_LIST_OF_VEND) which should be 14 characters.please tell me briefly how to do this because this is first time i am using SQ00.
    one more issue is when i selected "edit-otheruser group" and choosing /SAPQUERY/FK  i  am getting only infoset "/SAPQUERY/FIKD" but i should need Info set: "/SAPQUERY/FIDD" please tell me how to add the previous one into user group.i think if i got /SAPQUERY/FIDD into usergroup  /SAPQUERY/FK i can add region also into Query report as i mentioned above by going SQ01 ...............................
    please help regarding this which should be very beneficiary to my carrier.
    Regards,
    naresh

    Hi Experts ,
    I solved issue by changing infoset in SQ02 by means of assigning field to field group and changed the query in SQ00.
    Regards,
    naresh.

Maybe you are looking for