One Transport request objects copy into new transport request

Dear Experts,
I created a transport request under which i saved my objects. <b>Now i need to  copy  old request objects into new request  or  split that transport request into number of new transport requests.</b>  First of all It is possible or not , if it is possible please tell  me the solution how to do.
Regards,
Krishna

Hello Krishna
You can
(1) add object lists of already released requests ("old" requests) to you current request (still changeable)
(2) merge changeable transport requests together
(3) split a changeable request into several requests
Whereas (1) and (2) are supported by standard functions of the SAP system (3) is a manual task involving the following steps:
a.) Create a new request
b.) Copy required transport entries (e.g.  R3TR TABL ZMYTABLE) from one request to the new request
c.) Delete all copied transport entries from the object list of the "first" request
However, if you are not fully aware of the dependencies between different transport object entries the splitting of object lists may cause hassle when you import the splitted requests into the next SAP system.
Regards
  Uwe

Similar Messages

  • Error while activating objects copied into new namespace.

    I am receiving the following error when I am trying to activate objects copied from an existing namespace to new namespace.
    What could be the reason ?
    Activation of the change list canceled Check result for Message Mapping MM_BBP_ESI_ERP_CONTRACT | http://frictionless.esource.com/v2.1:  Namespace http://frictionless.esource.com/v2.1 is not defined in the software component version FCI, 1.0 of frictionless.com   Namespace http://frictionless.esource.com/v2.1 is not defined in the software component version FCI, 1.0 of frictionless.com

    Hi,
    How about activation namespace objects in tab "Change List"?
    Regards,
    Jakub

  • How to Copy Service request Notes to the new Service request

    Dear Experts
    I have to write code for copying the service request's notes filed value to the new service request when User clicks on copy button.
    Fields in the Heard are getting copied when user copies to a new service request. But notes filed are not getting copied.
    Please suggest the available options for coding / configuration to achieve this.
    Regards
    Hanu
    Edited by: Hanu Madhava on Dec 14, 2011 12:05 PM

    Hi,
    The thing is like this....
    i have a released request in which we have more than 1200 objects, in that i dont need 10 objects.
    so when i create it as copy of transport request, i just deleted those 10 objects and saved.
    Now, if i transport the new request how many objects will go? 1200 or 1190?
    in the new request i am getting the old request under Comment: Object List Included.
    is it necessary to transport the old request?
    i need to transport only 1190 objects.
    Regards,
    Satish Reddy.
    Edited by: Sathish Reddy on Jan 28, 2010 2:18 PM

  • All items are copied into Credit Memo request

    *Dear All*
    *Suppose I have created one scenario in which there is material code with one free goods and run uto the billing.*
    *I just need to know while creating Credit memo request wth reference to Billing,All items are copied into the sales order.My concern is that we can not hide free goods item in return order through Item selection.*
    Plz suggest on that issue

    Hi
    Yes you can set it up in the copy control of the item category so that it is not copied in the return order. But there is a specific reason why SAP would copy it into a return order. Suppose you sell goods and give something free, then based on the principle that the goods which were free were sent with the charged goods, it is expected that if the charged goods are sent back the free goods should also be returned.
    Thanks
    Indranil

  • Item Pricing date from ref. Invoice not copied into Credit memo request

    Hi SAP experts,
    If a reference invoice includes several pricing dates on item level
    only the first pricing date will be copied into the credit memo request.
    Example: Invoice includes three items. First item has pricing date
    2007-03-01 and item 20/30 have pricing date 2007-03-03. When creating
    a credit memo request with reference to this invoice,
    Pricing date 2007-03-01 will be copied to VBKD-PRSDT field
    on header/item level.
    When the customer has a foreign currency in use, the exchange rate
    in the credit memo request will be from 2007-03-01 and not from
    2007-03-03 for items 20/30. This is wrong.
    Can you help in finding a solution? Copying routines?

    Hi,
    Yes data transfer routine is the solution for this.You can create and assign a new routine in the copy control at item level for Invoice to Credit memo request.Here you can write the code as to transfer the data of pricing date field form billing document to credit memo request.
    This should work.
    Reward points if useful.
    Regards,
    Amrish Purohit

  • Workflow Approval Process: 1)How to insert Custom Data into Windows Workflow database? 2)In workflow Approval Process while creating new request ,how to insert our custom data like approvers ,requester,object info into WF DB?

    hi ,
    here the description about my question.
    1)i am working on windows workflow,we need to implement approval process for my project.
    2)we have multiple approvers for one request,requester,created object information.
    3)now i want to insert and retrieve, created instance information from windows workflow
    database.with all following details 
    i)Workflow instaceId,
    ii)current state of work flow(idle,complete,pending)
    iii)approvers information.
    iv)requester information.
    v)created object information.
    here some of the links, which i am trying for solution:
    https://wf.codeplex.com/wikipage?title=Tracking%20states%20with%20WorkflowApplication[^]
    https://msdn.microsoft.com/en-us/library/ee622977(v=vs.110).aspx[^]
    please answer to my question. if you want to send any examples send me to my email address.
    [email protected]

    Hi，
    According to your description, it seems that your main issue is about customID paramerter in workflow approval prcess.
    About this, please refer to the two samples:
    http://blog.petegoo.com/2010/08/22/workflow-4-email-approval-sample/
    http://cgeers.com/2010/04/10/windows-workflow-in-asp-net/
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Multi-Mapping Error after copying into new namespace

    Hi everybody,
    we got a BPM running using a multi-mapping.
    We decided to design new namespaces. After copying every IR object (datatype, message-type, mappings etc.) --> SXMB_MONI shows a mapping-error.
    But when I take the payload and test the mapping, everything is fine?
    Any ideas?
    Regards Mario

    Hi,
      If your payload has Messages tab remove that..and test the payload.
    Payload doesn't have any Messages tab.
    Just i have given example payload..this payload two strucures it will split into twofiles..and compare your payload should be like same
    <?xml version="1.0" encoding="UTF-8"?>
    <STRUCTURE>
    <EMP_DETAILS>
       <EMPNO>123<EMPNO>
       <EMPNAME>XYZ<EMPNAME>
    <EMP_DETAILS>
    <STUDENT_DET>
       <STUO>123<STUNO>
       <STUNAME>XYZ<STUNAME>
    </STUDENT_DET>
    <STRUCTURE>
    Regards,
    Venu.

  • [Transport transformation]: Object not found in Transport Connection.

    Dear All,,
    Would you like kindly help me please .. ???
    I have transformation in development that's going to be trasnported to Production.
    But somehow, when i go to transport connection, i couldn't find the object there.
    The tranformation that i can't see, the transformation that link between datasource and info source. But transformation linking Info source to info provider can be found.
    I've already done:
    1. Reactivate the object ( i edit, and i activate it).
    2. Logging off the system, and log on again.
    But for those techniques, i'm still unable to find the object in transport connection .
    Could you help me please ??
    Is it caused authorization ?? If yes, what authorization made me unable to see it .. ??
    Best regards,
    Daniel N.

    HI
    Recheck your Collection of Object at Transport Request , Make sure that you have selected before / after DS because you can only see After Info Source ..
    Recollect the objects at Source system and transport them to Target System again Properly.
    Transports -Procedure
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
    http://help.sap.com/saphelp_nw2004s/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
    others
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e883de94-0501-0010-7d95-de5ffa503a86
    http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/57/38e1824eb711d182bf0000e829fbfe/frameset.htm
    Re: Transport Organizer---
    transport query (bex objects)
    http://help.sap.com/saphelp_nw2004s/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
    Hope it helps and clear.

  • Media Files Sorted/Copied into new folder

    I have a huge project and thousands of files I need to find all the media(quicktimes) of specific shots with the same shot/take lable and copy those files into a new folder so i can send them to someone else to edit with.

    Highlight all the clips in the BROWSWER that you want to transfer and use the MEDIA MANAGER and the COPY option.
    Shane

  • Copy Transport Request to other new transport request

    Hi Gurus,
                  I collected Info Objects, Info Areas, Application Components in on transport request. I want to split Application objects and Info Area into new transport request. So that I can have Info Objects with existing transport request and other objects in new transport request.
                I tried in SE01 to include objects but I am not sure which option I need to select. I want to select specific objects to copy to other transport.
                Appreciate your help.
    Thanks
    Ganesh Reddy.

    Ganesh,
    You can delete the Info Objects and info area from the existing transport and collect those in separate transport request by change them .
    Go to SE09 and select the Request --> Go to Task and double click --> Go to change mode and delete the info objects and info area ..
    Hope it helps ..
    Ravi

  • Transports from Dev System to Quality System, Objects copied in Local reque

    Hi All,
    I am doing transports from Dev Box to Quality Box, while collecting the objects , some required objects got collected in a local request(9xxxxxx) and some got collected in Work bench request(9yyyyyy), Now I want to add , the objects collected in the local request to the work bench request to have  a single work bench request i.e 9yyyyyy for transport , with  all the objects of the local request 9xxxxxx and already collected objects in work bench request 9yyyyyy,
    Please provide the solution for the situation
    Thanks in advance
    suitable answers will be awarded
    Prasad

    Hi,
    1.First see that your workbench request has a different target system than the ones pointed to by the development class/package of the objects you are trying to assign.
    or,
    The objects are not assigned to correct development class/package.
    2. When we try to create a workbench request, we will see only the request and that is fine.
    3.Now, release the local request containing your objects.
    4.Include the local transport objects to the new workbench request (Ctrl + F11).
    and  release and transport the workbench request.
    Pls assaign the points if it is useful.
    Regards,
    Raghavendra Rao.Kolli.

  • Transporting an object from testing client to development client

    Hi,
                 This is Sekhar . My question is
      If i transported an object from development client to testing client .After transporting object to testing client i got a bug so that ABAP developer should work on that and how could i modify that bugs in testing client .Is it possible to modify in testing client? Is their any reverse transportation from testing client to development client?
    please give me reply for my question.
    Thanks & Regards
    Sekhar Rao

    Hi Ankesh,
    You said that
    "        If there is a bug then make appropriate changes in DEV and transport the object again.
            Reverse transports are not needed and such paths are not created.   "
    I am asking that my object is in TES client and i need it in my DEV client again to make appropriate changes for bugs i got.then what i had to do.
    please reply  me
    Thanks & Regards
    Sekhar

  • Issue with creating new change request

    Hi
    We have implemented charm and we are using the workcenters for people to be able to access and create new change requests. When i click on the link to create a new change request it takes me to the screen to create a new one and it shows a New Change Request Number eg 51. With out saving or entering anything I go out and back to the workcenter and then click to creat a new change request and when it takes me back in to create a new change request it shows a new change request number i.e 52. Why would it do this?
    Santosh

    Hi,
    wel by default a transaction is autosaved..so u hav diff no each time you logged into this.
    Go to spro and choose your transaction type i.e. SDCR for change request and double click it
    and now remove the Tick from
    Early No. assignement
    This wil solve your problem so whenver it opn no appears by default only whn u press save it generates a no.
    Pls assign pts.

  • Getting the Request Object in the EJB published as a Web Service

    Hi experts,
    I have a Portal Service that call a BAPI in a back-end system with the Connector Framework. I have a Portal Component that calls the Portal Service, passing the Locale (request.getLocale()) and the User (request.getUser()) object. It's work fine!
    I need to call the Portal Service by an EJB that is published as a Web Service. The connection between the EJB and Portal Service is ok, but I don't know how to get the Locale and the User object in the EJB to pass to the Portal Service.
    Is possible to get the request object from the HTTP SOAP Request?
    Thanks,
    Gustavo

    Hey Alice!
    The Feature Hashing module is actually a wrapper around
    Vowpal Wabbit's implementation of the murmurhash. Thus, it takes text in, and produces 2^N new features based on the text, where N is the bitsize specified in the module. These features (and not the original text!) should be used during model training.
    The Learner will then keep track of these features behind the scenes.
    When you publish your web service and these features are recomputed for new input text (same N), they are used as the features for scoring.
    Does that make sense?
    Regards,
    AK

  • Individual entries cannot be put into the change request (message SV141)

    Hi,
    I am trying to save an activity that I have created for SOP (Production>SOP>Function>Mass Processing>Define Activities).
    When I click on the IMG node, I get the following message:
    "Individual entries cannot be put into the change request
    Message no. SV141
    Diagnosis
    For technical reasons, the entries cannot be fully specified in the change request. There are two possible reasons for this:
    1. The key of an entry is longer than 120 characters. All entries whose keys match up to character 119, are then copied into the change request, rather than an individual entry.
    2. The key of an entry contains fields of special data types, for example, packed numbers. The key can only be specified in the change request up to the first such field from the left.
    all entries whose keys match up to character 12 are copied into the change request, rather than a single entry.
    System Response
    The selected entry is copied into the change request correctly, but other entries may be copied as well."
    Can anyone explain why and if I have to do something to ensure it is captured in the CTS?
    Thanks,
    Lars

Maybe you are looking for