Integrate ECC with SRM Document Builder

Hello SRM Guru,
We have requirement in our client to Integrate ECC with Only SRM PPS Document Builder Component.
Here is more detail:
After creating PO in ECC , User should click some button in the PO Transaction that should launch the document
builder Webdynpro where they can enter some more questioners then the PDF format or Word format contract will be generated then it should be attached in the PO in ECC.
Client wanted to use only SRM document builder component. Could you please let me know the possible
option to integrate ECC and Document Builder.
Like how to open document builder webdynpro application form ECC and how to transfer PO details to Document Builder
and finally how to attach the generated contract to PO in ECC.
Thanks in Advance.
VJ

The upload type should be same, for ECC and SRM .. only the datasource need to be changed
Example:
If I you want to integrate Contracts from ECC and SRM, The OPM_SOURCES table should be like BELOW
ECC:
SOURCE ID  :    SRXCLNT220##ZBBP_TD_CONTR_2
SOURCE NAME  :  CONTRACTSSRM_DS
UPLOAD TYPE :  CONTRACTS
SOURCE TYPE    DS
SRM
SOURCE ID :     EXSCLNT220##Z_SADSECC6CONTRACT
SOURCE NAME :   CONTRACT_DS
UPLOAD TYPE :   CONTRACTS
SOURCE TYPE :   DS
Rgds,
Raj

Similar Messages

  • How to Integrate ECC with Payment Gateway

    Hi Gurus,
    I need your help. We have one requirement.
    Here is the scenario.We have one custom screen for direct sales in stores. The user scan the articles and enter the price, and ask the customer to pay by card or cash.
    If the customer wants to pay the amount by cash, then user enters the amount and clicks on cardpay button.
    Here after the payment has to be taken care by the third party payment gateway (XYZ).
    Now I need to integrate ECC with third party payment gateway. If you can post any docu2019s related to this, or any form of help is highly appreciated.
    Please let me know if you are not clear or any concerns.
    Thanks & Regards,
    Shiva Reddy.

    Hi shivach ,
    There will be lot of way to achieve this, I want to suggest one of the possible way :
    If there is Third party agreement is done to collect the payment then from SAP end you need to do two things.
    1. Outbound from SAP : when user clicked of Card Pay button then take the all mandatory validation if required from your end and generate a Payment Referenec Number and redirect to the Third party URL with details like amount Payment Reference No., customer card No. etc...,
    2. Inbound to SAP : once the Third party gets the  confirmation of payment then they have to revert back to your SAP system with the detail's to synchronize the payment with the following parameters like  : same payment Ref No., Unique transaction reference No. what they have generated from there end, customer card no. for further verification at your end and with the payment status saying Transaction is Success of fail. for that you can prefer to use Custom IDOC.
    Since payment and all is highly secured transaction so that you can discuss with your third party to get the double verification before getting the payment finally confirmed, for more secure transaction use Encryption Decryption concept.

  • Integrate CCM  with SRM using XI

    Hi All,
    Is XI mandatory to integrate CCM with SRM if we don't use XML catalog load files
    Message was edited by:
            Ratan Erukulla

    Dear Ratan,
    The SAP CCM provides no automation for content or schema upload via any method (CSV or XML) however it should not be difficult to create your own interface for this purpose, look at using the program /CCM/FILE_UPLOAD for this purpose. However, be aware that ther eis no SAP Support for such upload - only standard upload through the CCM UI is supported.
    Regards,
    Jason

  • Integrate ECC and  SRM data to SPM.

    Can someone give me step by step process to integrate two systems to SPMu2026
    Like : We already done ECC source connection  with direct data source method . Now we have to integrate SRM data to SPM.
    The data sources has been generated in SRM and replicated to BI, maintaining entries in table OPM_SOURCES also done.
    Some can help me how I can take it futher form here
    Rgds,
    Raj

    The upload type should be same, for ECC and SRM .. only the datasource need to be changed
    Example:
    If I you want to integrate Contracts from ECC and SRM, The OPM_SOURCES table should be like BELOW
    ECC:
    SOURCE ID  :    SRXCLNT220##ZBBP_TD_CONTR_2
    SOURCE NAME  :  CONTRACTSSRM_DS
    UPLOAD TYPE :  CONTRACTS
    SOURCE TYPE    DS
    SRM
    SOURCE ID :     EXSCLNT220##Z_SADSECC6CONTRACT
    SOURCE NAME :   CONTRACT_DS
    UPLOAD TYPE :   CONTRACTS
    SOURCE TYPE :   DS
    Rgds,
    Raj

  • How to integrate Flex with Word Documents

    Now I am doing R & D about Flex and MS-Office integration (.doc, .dox, .odt, .ods, .xls, .xlsx).
    While surfing the internet some people said there is no way to display & edit document in flex applications. But some people suggested to use third party tools.
    I got print2flash as a third party tool which is helpful to convert word file to .swf file but it not working some times. So I couldnt get any idea regarding this. Kindly help to me to fix this.

    I would try a couple of things and see what works the best. If you need to show an exact document replica than going with PDF or HTML format should be your first choice. The conversion would be done on the server and the only solution to come up with is how to show documents. In order to show either format you will have to stick to an AIR application. If it has to be a web application than you can try opening a word doc over the network as a file (doing it from an html wrapper), or loading it from your web and allowing the Browser showing it via a default document viewer. In both situations a document will be open in a new browser window. If that's not an option, go back to AIR.
    HTH

  • SRM 7.0 with Document Builder

    Hi Experts,
    We have a SRM 7.0 with PPS. We want  to use Document Builder  function.  We could find the Document Builder  node in IMG (tcd spro).
    According to the Business Scenario Configuration Guide of SAP Document Builder, it seems we need install PSDOCB 300 add-on. But I couldn't find the PSDOCB 300 add-on in SMP( no authorization?).
    Should I install PSDOCB 300 or Document Builder is already  build-in?
    If I should install PSDOCB 300,where I can find it, pls show me the download path?
    If Document Builder is already  build-in, what should I do to show the node in IMG?
    Thanks!
    SRM 7.0
    NW7.01
    PPS is actived

    Hi Jay,
    I made a double check, there is no Document Builder node under IMG >>Cross-application Components in our SRM system.
    Is there any components we didn't install?
    BTW  : we have Integration with SAP Document Builder node .
    The following is installed sofeware components in our SRM system:
    SAP_ABA             701     0007     SAPKA70107     Cross-Application Component
    SAP_BASIS             701     0007     SAPKB70107     SAP Basis Component
    PI_BASIS             701     0007     SAPK-70107INPIBASIS     Basis Plug-In
    ST-PI         2008_1_700     0000     -     SAP Solution Tools Plug-In
    SAP_BS_FND       701     0008     SAPK-70108INSAPBSFND SAP Business Suite Foundation
    SAP_BW             701     0007     SAPKW70107     SAP Business Warehouse
    SAP_AP             700     0021     SAPKNA7021     SAP Application Platform
    SRM_PLUS             700     0009     SAPKIBK209                          SRM_PLUS for mySAP SRM
    SRM_SERVER      700     0009     SAPKIBKV09     SRM_SERVER
    SRM_EXPL             700     0009     SAPK-70009INSRMEXPL     SRM Extended Functionality for SRM_PLUS including PPS
    SRM_EXT             700     0009     SAPK-70009INSRMEXT     SRM Extended Functionality for SRM_SERVER including PPS
    VIRSANH          530_700     0011     SAPK-53311INVIRSANH     SAP GRC Access Controls 5.3 for 700 HR a

  • OpenText integration with SRM

    Hi gurus, I am new here.
    I have studied VIM (vendor invoice management) by Opentext by my own during a month, and I am going to start to implement it in a project but I need to integrate VIM with SRM.
    I have searched for information but I haven't succeed.
    Could you recommend me some web page or tutorial?
    Thanks!

    Hello,
    Purchase Orders exist in ECC backend (as their SRM Confirmations being Goods Receipt in ECC).
    Invoice is based on ECC data, that's why i say, for me, there is no link/integration between VIM and SRM: documents used by VIM are the ECC ones.
    Regards.
    Laurent.

  • Document Builder Scenario

    How I can create scenarios for SRM-Document Builder (Inbound & Outbound).
    Please give me idea for SRM7.0 - Document Builder 3.0.
    Are we using Webservice for Document Builder ?
    As we are using Proxies for SRM, it is clear, only problem is with Integration with Document Builder.
    Study SAP

    Hi
    XI Content is also available for Doc B 3.0
    SAP Content---- ESR Content (XI Content)--XI CONTENT PSDOCB--XI CONTENT PSDOCB 300---PSDOCB30009_0-10003840.ZIP
    This content is updated on 22.10.2010..
    Before importing the contents in ESR..upgdrade the SLD SIM & CR contents.
    Add the document builder product & swcv in the Business system of DocB system.
    Now you can see the objects in Sproxy of DocB System
    Please check the config guide also for the use of proxies or webservices.
    Regards
    Abhijit
    Edited by: Abhijit Subhash Bolakhe on Jan 17, 2011 3:19 PM

  • How to: MDM Integration with SRM

    Hi MDM Exerts,
    I would like to know how to integrate MDM with SRM. I have installed MDM 7.1/Catalog 3. I would like to SRM & MDM to be connected to each other.
    Your help is appreciated!
    Thanks,
    Afi

    Hi,
    Check SAP note 1177779 - "SRM-MDM Catalog 3.0 - Installation & Configuration".
    For detailed explanation I would suggest to check below documents..These contains all the setting needed in SRM and MDM to implement SRM MDM Catalog.
    [SRM MDM Integration|https://websmp107.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=012002523100015170792009E]
    [SRM-MDM Catalog 3.0: Component Installation Guide |https://websmp107.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=012002523100012367812008E]
    [SAP Supplier Relationship Management 7.0: SRM-MDM Catalog|https://websmp107.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700001156822009E]
    Hope this helps.
    Regards,
    Shiv

  • Using xpath expressions in Document-Builder

    Hi all
    we have re-designed our (existing) DDX-templates with the Document Builder in LC Workbench. The DDX templates are used to assemble PDFs with LC Assembler-Service.
    Now my question: Is it still possible to use XPath-expression in the DDX template? Please find our example below:
    The XPath expression works only if we copy&paste the DDX source code directly to the Assembler-Service property view (picture below). But referring the DDX-template doens't interpret the xpath path at run time (2nd picture below). Any help on that will be appreciated!
    Works (using DDX source code directly):
    Doesn't work (using DDX template):

    Hi,
    >
    I tried to get a portion of an XML by using XPath Expressions as follows:
    String xPathExpression =
    "declare namespace xq='http://inti.notariado.org/indices' " +
    "$this/xq:RULES/xq:RULE[@disabled]";
    I think any XPath expressions which use [] are not supported in stand alone
    version, but as this is not documented I could be wrong.
    Regards
    Arek

  • Integrate Document Builder to SRM (wihtout using PPS or XI)

    Hi all,
    I am using SRM 7.0 and I want to use the Document builder with SRM  without activation the PPS (Procurement for Public Sector) business scenario and without XI.
    I looked at some documentation at the service market place
    https://websmp204.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000676863&
    and also found the Wiki entry:
    http://wiki.sdn.sap.com/wiki/display/DocBuilder/DocumentBuilder3ContentConfiguration+Guide
    But the first seem to imply the use of PPS, and the second one describes the configuration of a stand-alone mode, which means that Document Builder is not integrated to another component.
    Can anyone give me any advice on how to integrate the document builder into SRM without using PPS or XI?
    Thanks very much.
    Regards
    Ulrike

    Hi,
    Thank you, Roman, for creating the helpful instructions on integrating Document Builder with HCM using Web Services (Cross-application synchronized integration - SAP Document Builder - SCN Wiki).
    Document Builder can be integrated to any SAP application in a similar fashion to how Roman describes in his link; however, in the case of SRM with Procurement for Public Sector (PPS) there is out-of-the-box configurable integration available that shortcuts this process.  Licensed PPS customers can access the PPS integration aide by activating the PPS switch.
    Best regards,
    Maxine

  • Integrate Document Builder to SRM PPS using Web Service

    Well, if what you want to see is the "Document Builder" link from "Related Links" of your RFx document, what you need to do is to configure it in IMG :
    SPRO - SRM Server >> Cross-Industry Functions >> Integration with Document Builder >> Activate Document Builder Integration
    There you should specify an entry with the following:
    DB DocTypes: Object Type EBP Local RFx
    And the URL to the Doc Builder webDynpro application in the format of https://<server:port>/sap/bc/webdynpro/ipro/wd_docb
    And be sure to check that checkbox marked with "+" on the column header.

    Hi Jay,
    Ok thats done. Still i we need to do the Web Service activation through SOAManager rite.  Correct me if i am wrong.
    There are 2 parts to look into it.
    1.  We can use the OLD Proxy Method used as Web Service.
    2.  Integration with SAP XI. (Note: PID is available in System Landscape)
    We took the discussion to go with OLD Proxy Method used as Web Service for now, Since its working in Sandbox.
    We created a client proxy ZDOCB in SE80 and activated it using the wizard.
    we created a Logical Port in LPConfig.
    And when checking for Web Service in WSADMIN, we are not able to find the Old Proxy used as Web Service.
    We can use SOAManager instead.  Since its not Configured in Sandbox, we went and configured in the old transaction itself (WSADMIN, LPCONFIG).
    If its feasible, can we do in SOAManager also.
    Objective:
    to get the Document Builder reflected in the Related links of RFx and Contract. 
    Regards,
    Freemind

  • SRM PPS with Document Builder

    Hi,
    We installed SRM 7.0 SP8 with PPS.
    How do I activate Document Builder. As per configuration guide i didn't see /IPRO/FND_DOCUMENT_BUILDER business function.
    Couple of Question
    1. Is it Add-On installation required for Document Builder ?
    2. What is the latest version of Document Builder ?
    3. How do I check whether document builder installed on my system ? Which parameter needs to check ?
    4. How do I check the version of Document Builder on my system ?
    Thanks a lot

    That's the issue, As per configuration guide needs to activate /IPRO/FND_DOCUMENT_BUILDER business function. But I don't see that business function on SFW5.
    But I activated both PPS function already.
    Edited by: Laasya.Pat on Nov 29, 2010 8:47 PM

  • Records management and Document builder in SRM with PS

    Hi,
    We are implementing SRM 5.0 with PS ( Public section), can any one share any experience and documentation about Records management and Document builder in SRM with PS.
    Thank you
    Sreedhar Vetcha

    Hi Chris,
    I am having the same issue as Patrizia while using BSP, SRM_DEMO_RECORD & SRM_DEMO_BSPEXT, to search/display, maybe update later the records,documents,and notes that are stored in RM. I have read all the documentation  described in your messages as to how to customize web display BSP application using these 2 BSPs, srm_demo_record & srm_demo_bspext. 
    I tested SRM_DEMO_RECORD with <srm:element> tag embbeded in the layout page, but it lists only the records that associated to a given RMS_ID and SPS_ID, and I wasn't able to get it to display the associated document and notes for a selected RM record. The comments on the iview page in BSP suggest the custom code is needed for initial request from browser and callback event to return the notification for the activities occurred in RM. As you suggested to Patrizia, I wonder if you've some sample code that i could use to make these BSPs work before additional enhancements is needed later.  As far as other prerequisit settings of http access and assigning search interface class to the correct service provider element type using GENSP_QUERY_EXT connection parameter are all properly set with my customer. So i'd feel really grateful if you could forward me the example codes for these BSPS.
    Regards,
    Amy Lee
    SAP NetWeaver Consultant

  • How is the integration with ECC in SRM 7.0??

    Hi,
    Working with SRM 5.0 or 5.5  the use of XI for integration with ECC is not mandatory because when we send any document from ECC to SRM like requisitions (to convert them in shopping cards) or when we send any document from SRM to ECC like shopping cards, PO´s, contracts,  we only use the RFC´s and the abap programs.
    Is the same behavior with SRM 7.0?????
    Could the integration from SRM 7 with ECC 6 work with RFC´S without XI or for this vertions is XI mandatory?????
    Thanks

    SRM70 is closely integrated with XI for transferring docs between ECC and SRM.  SAP introduces eSOA tech nology with SRM70 and hence all documents like PR from ECC to SRM, Central Contract from SRM to ECC, PO creation (Classic), etc uses this techn ology.
    Thanks,
    Jagadish

Maybe you are looking for