Intel 3.06GHz on MSI 648 Max L

Hi,
I have a question; if I were to purchase in the future a P4 3.06Ghz processor which supports HT, will it work on my MSI 648 Max without hyperthreading just as a normal processor? I understand that hyperthreading does not work on this board (the one without the udated chip). I'm just curious if the processor itself is supported. I don't see why not, it should just work as a single 3.06 processor. Thanks in advance.
Razvan Scutaru

I have the 3.06 running in mine , and the board is the one that does not have HT.. and it works just fine..
The only thing that I have found is that you cannot run 400 mghz ram in it with spd setting.. you will have to go and set up the setting manual and then it will work.. don't ask me why I can't find it out..lol..
But other than that it is one fast computer..
also if you set the ram setting to anything other than the fast setting it will default back to 2.5 on the cas setting..
But after running bench marks I can't see any improvement by running at a cas of 2..
Also if you have a black screen when you are working with the bios you will have to clear them and reboot .
I had one that gave me problems but it was the PSU that was causeing it.. 400 wat but in real load it was only putting out 328 wats.. and that will not work with a 9700 pro in this board.. at least it would not on mine.

Similar Messages

MSI 648 Max - help???

I Bought the MSI 648 Max (HT ready) in April this year...
Link
Now i would like to buy a new cpu, and i was looking at getting a 3ghz, but the board details state that it can support a 2.8 and up??? what is this "and up"??
Should i just go for a 2.8???
any suggestions would be great!
"Supports Intel® Pentium® 4 processor in the 478 pin package.
Supports FSB at 400/533 MHz (100/133 MHz QDR)
Core frequency from 1.3 GHz to 2.8 GHz and up"

The Proccessor that i was looking at..
Intel® Pentium 4 3.06Ghz / 512K / 533FSB 478-pin (Boxed)
New P4 revision based on 'Northwood' 0.13 micron core +
512Kb L2 Cache. Supports Hyper-Threading. (HT enabled)

MSI 648 Max-L

MSI 648 Max-L (MS-6585) SiS 648 P4 (533FSB) Skt478 DDR ATX Motherboard w/Audio, LAN Retail
400/533FSB, ATA/133, AGP 8X, 3DDR DIMM, 6PCI, USB 2.0, Audio, LAN, Bluetooth Pin
93.49
ok my question is... im sorry i just wanna make sure i buy the right motherboard ok ?
can this motherboard support
intel p4 3.06 Hyper threading
1gb kingston ddr 333
40gb ata133 7200 rpm
maybe msi geforce fx the new one but i cannot find it on my online retail store so i probably going to buy an ati 9500 pro 128mb 8x
windows xp prof... this motherboard comes with ata133 cables for my HD?
whow will work my system and whow much time my motherboard is going to work
if this motherboard dont support the above config. plz sugest me any other motherboard... that will work perfect or just sugest me any other better version of mobo u guys have... and plz tell me where i can buy the msi geforce fx plz ...and for whow much thank u guys

Make sure you get the HT Ready version. Utilizes the 648bo chipset and also has a sticker on the box. Im not exactly sure how to distinguish the 2 different types because the model numbers are EXACTLY the same.
Support Hyper Threading..
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=417&MODEL=MS-6585
Doesn't Support...
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=355&MODEL=MS-6585
-rob

Wanna OC msi 648 max

I wanna try and oc this damn thing and see how it goes but my bios is retarded. if i change anything in it it will not start. no post no screen no nothing sits there and i think hdd light goes on but nothing is actually going. for me to go back i have to clear cmos and i have tried diff bios versions and all the same. so what the heck can i do? i plan on buyin new board and drives soon as seeing all msi crap sux. dont know y i bought em all there a bunch of liars. so if anyone got a way other than buying new board cuz thats on way just wanna see what this one got.

Don't bather yourself I have the same problem.
:O MSI FAKED US ALL A BIG ONE. The problem is in the option AGP/PCI Frequency (MHz)
It doen't work and my clue is:
1- When I adjust my CPU FSB more than 110 MHz (PCI > 36.66 MHZ) and set this option to 66/33 the computer boots normally until it starts loading the O.S. and errors saying that the OS cannot start due to lost system files, or Read
Write error to Aux device, or it hangs.
2- When I set this option to 80/40 and the CPU FSB to Auto (100 MHz), the computer boots normally and load the O.S. normally and everything goes just fine. and Sandra software reports the PCI clock frequency as 33 MHz.
Thats to say that the PCI/CPU FSB ratio is fixed at 1/3 regardless to any value selected in this option.
My system is:
Msi 648 MAX ver1.0 HT ready S.N.(648 Max0304165360)
Intel P4 2.4Ghz 512KB bus 100 Mhz
Msi MX440SE-T AGP 64MB DDR
WD 80GB 7200 HDD
Samsung 52-24-52 CD-RW
Creative modem blaster v.90 di5655
P.S. Logic 350W
Win 98SE & WinXp

Why msi 648 max HT ready cannot be OC

?( The problem is :
The bios has an option in the frequency/voltage control menu called
AGP/PCI Frequency (MHz)
which gives me the ability to adjust the pci/agp bus clock frequency.
This option doesn't work, and my clue is
1- When I adjust my CPU FSB more than 110 MHz (PCI > 36.66 MHZ) and this
option to 66/33 the computer boots normally until it starts loading the O.S.
and errors saying that the OS cannot start due to lost system files, or Read
Write error to Aux device, or it hangs.
2- When I adjust this option to 80/40 and the CPU FSB to Auto (100 MHz), the
computer boots normally and load the O.S. normally and everything goes just
fine. and Sandra software reports the PCI clock frequency as 33 MHz.
Thats to say that the PCI/CPU FSB ratio is fixed at 1/3 regardless to any value selected in this option.
My system is:
Msi 648 MAX ver1.1 HT ready
Intel P4 2.4Ghz 512KB bus 100 Mhz
Msi MX440SE-T AGP 64MB DDR
WD 80GB 7200 HDD
Samsung 52-24-52 CD-RW
Creative modem blaster v.90 di5655
P.S. Logic 300W
Win 98SE & WinXp
?(

648 Max HT Ready CPU Support Status

MSI 648 Max - Memory question

Hello everyone,
I have an old MSI 648 MAX MB for which I would like to do a RAM upgrade.
I can get DDR400 RAM quite easily, but they are Apacer 512MB DDR400 modules, which do not appear under the list of supported RAM modules.
Does anyone know if this RAM is supported, and if not at DDR400, can the BIOS settings be changed to allow it to run at DDR333?
TIA

Good day,
Here is the specs of the PC:
Processor : Intel(R) Pentium(R) 4 Northwood 2.40GHz
Mainboard : MSI 648 Max (MSI MS-6585)
Memory : 2 x Apacer Technology 512MB DDR400
Video Card : NVIDIA GeForce 6800 AGP
Hard Disk : ST380011A (80 GB)
DVD-Rom Drive : LITE-ON DVD SOHD-167T
CD-Rom Drive : ASUS CRW-2410A
Network Card : Realtek Semiconductor RT8139 (A/B/C/810x/813x/C+) Fast Ethernet Adapter
Operating System : Microsoft Windows XP Professional 5.01.2600 Service Pack 2
PSU : ProCase SH-400WA8/P4
+5V
+3.3V
+12V
-12V
-5V
40A
22A
15A
0.8A
0.5A
I will run MemTest86+ later and report back the results.
Best regards

Msi 648 max question

) hi,
my motherboard is 648 max.. and I have a graphic cardwith 32mb memory.
in the system setup where the agp memory is I can only toggle between 32 and 64..
?( dose that mean that I can't use a 128mb graphic card? ?(

Good day,
Here is the specs of the PC:
Processor : Intel(R) Pentium(R) 4 Northwood 2.40GHz
Mainboard : MSI 648 Max (MSI MS-6585)
Memory : 2 x Apacer Technology 512MB DDR400
Video Card : NVIDIA GeForce 6800 AGP
Hard Disk : ST380011A (80 GB)
DVD-Rom Drive : LITE-ON DVD SOHD-167T
CD-Rom Drive : ASUS CRW-2410A
Network Card : Realtek Semiconductor RT8139 (A/B/C/810x/813x/C+) Fast Ethernet Adapter
Operating System : Microsoft Windows XP Professional 5.01.2600 Service Pack 2
PSU : ProCase SH-400WA8/P4
+5V
+3.3V
+12V
-12V
-5V
40A
22A
15A
0.8A
0.5A
I will run MemTest86+ later and report back the results.
Best regards

Sound Problems with MSI 648 Max ( MS-6585 ) Board - Help !!!

Hi,
i have the MSI Mainboard: MSI 648 Max ( MS-6585 ) and when I put on the microphone i have a bad sound on my soundboxes like scratching or beeping.
I have installed a new BIOS update and new Sounddrivers.
I have Win2000 with SP3.
Anybody can help me???
THX ;(

Error404,
I since you have a 648 Max and you posted in the Multimedia Forum, I moved the thread to PIV Motherboard Forum for you.
Good Luck,
Richard

Can't update my AGP driver MSI 648 Max-L

Hello, I have the MSI 648 Max-L (SiS 648 motherboard).
When I try to update the SiS AGP driver from 1.13 to anything newer (the latest is 1.16a), nothing happens. The installer fails to run.
What seems to be wrong?
Specs:
WinXP SP1
MSI 648
512MB PC2700
Radeon 9700Pro
Thanks in advance!

Quote
Originally posted by zardoz66
Hello, I have the MSI 648 Max-L (SiS 648 motherboard).
When I try to update the SiS AGP driver from 1.13 to anything newer (the latest is 1.16a), nothing happens. The installer fails to run.
What seems to be wrong?
Specs:
WinXP SP1
MSI 648
512MB PC2700
Radeon 9700Pro
Thanks in advance!
I'm having the same problem while trying to istall SiS AGP driver 1.15 but i have no previous versions installed though.

MSI 648 max problems, please help

Just put a new machine together and I am having some problems, hopefully someone can help.
My machine seems to run pretty stable in OS, but dies when any game is played. It will crash anywhere from 2 minutes - 45 minutes in the game. Ive tried several games: C&C generals, unreal2, etc with the same results.
Bios are updated and nothing is overclocked. Win XP is fully updated.
Specs:
MSI 648 max, 533fsb
p4 2.4 northwood
Seagate 80gig hd 7200rpm
MSI g4 ti4200
2 - 512mb pc2700 ddr333 dims (double sided)
Antec 350w ps
sb live
48x liteon cdrw
16x liteon dvd
We are using a Kingwin KT-436S-WM case
http://www.kingwin.com/product.asp?cid=15&pid=75
It has a total of 5 fans with intake/exhaust
HSF currently being used is the retail box HSF
With the case sides on, here are temps at idle after 10 minutes in OS:
Proc: 136
System: 91
Vid card: 118
With the case sides off, here are temps after running 10+ minutes in OS:
Proc: 125
System: 86
Vid card: 114
Here is the error that pops up (after crashing) when playing Command and Conquer: Generals:
Technical Difficulties
Sorry a serious error occured
Thanks in advance

Well my roomate cancelled the memory test after 12 hours, so I dont know those results.
I do know that after removing 1 of the DIMMS, the machine seemed to be stable playing games.
I sure wish MSI would have stated it only accepted 1 double sided DIMM.. especially when the reccomend Kingston ram, which is double sided......
Me and my roomate BOTH bought this motherboard, while my roomate only bought 2 DIMMS of 512, I bought 3!!!!!!!!!!!!!!!!!!!
So now it looks like we need to return these motherboards and get new ones... I HAVENT EVEN GOT MINE OUT THE BOX!!!!!!!!
Any reccomendations on an MSI motherboard (or any) that support double sided DIMMS? I am looking for 3 slots...
thanks...
Any other advise on how to get this motherboard to work with all this ram would help too, so we dont have to RMA through newegg....
Anyone from MSI read this board?????
X( :O ?(

MSI 648 Max - Display Problems

I recently bought the MSI 648 Max motherboard, as my system needed an upgrade quite badly. To cut the costs down a bit, I’ve used some parts from my previous system (eg the video card which is an 2x AGP, 64 Mb, Kyro based card) but got new RAM, CPU and psu.
I put together the system (described below), loaded Windows ME, updated all drivers with latest releases, and the thing works but the quality of the display is really bad ;( . That is, I get lots of video artefacts (shadows, fading text, vertical lines, distorted colours, etc). The video card was working fine on my other machine. Also, Sisoft Sandra says that the card is operating at 2x AGP, as it should.
I am not overclocking; some of the BIOS parameters I used are as follows (based on the OPTIMAL DEFAULTS):
AGP Aperture Size    128 Mb
DRAM CAS Latency    by SPD
Timing Setting Mode    NORMAL
MA 1T/2T Select    AUTO
Primary Graphics Adapter    AGP
Allocate IRQ to PCI VGA    NO
CPU/DRAM Frequency Ratio    by SPD
DRAM Frequency    167 MHz (for now)
CPU Frequency    133 MHz
AGP/PCI Frequency    66/33
DRAM Vcore        2.6 V
CPU Vcore       AUTO
The system temperature showed in the Health Status is less than 40 C (104 F).
I have tried the latest AMI BIOS (version 1.3), and then reverted to version 1.0, but I still have the same display problem.
I would really appreciate some help.
Ciao
mystro
========================================
Windows ME (v4.90.3000)
Pentium4 CPU 2.4 GHz (133x18.0), FSB 533 MHz
MSI SIS648 Max (MS 6585) ver. 1.0
2 x 256 MB Corsair DDR400 (CMX256A-3200C2, CL = 2-3-3-6-T1,
Hercules 3D Prophet Kyro 4500 TV Out (Kyro I not II) 64 Mb, AGP 2x, 175/175 MHz
IBM 40GB 7200RPM UATA100
Mitsubishi 40x CD-Rom
Yamaha 8424S CD-RW
Adaptec 2930U SCSI card
Eagle 350W psu, 190W (combined 3.3V & 5V)

boards agpx4 and 8 only so i dont advise using that card
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=355&MODEL=MS-6585

Windows XP and MSI 648 Max

Can anybody give me a good tips, whats wrong when Windows XP installation (BSOD) failed on a computer with MSI 648 Max, I can see that is many in the some siuation as me. But no one of the solutions looks like i good one. Is it somebode that have find out the problem, or?

Its a good idea, but the RAM that I use is the same thats worked fine in the computer earlier. Its DDR DIMM 3100 TwinMOS, and thats a good stuff if I know it right?.
I have tried to take out the harddisk and placed it in another computer, and installed Windows XP. After that I placed the harddisk in the computer with the MSI motherboard, and I get I/O error and it couldnt red from the harddrive. I think that its the 250 watts powersupply, as the problem. I have looked i BIOS and under PC Healt, and there I could see that the +12 V and -12 V will only give +/- 11-11,5 V. Now I have purchase I new bigger powersupply, and hope that gonna fix the problem.

MSI 648 MAX + 3Gb Memory

Hi,
I have put three GB of RAM in a PC containing a MSI 648 Max motherboard.
The memory is 3 * PC2100 1GB of Samsung 266 DDR RAM. I've ran memtest
(http://www.memtest86.com) to test the chips to test the chips individually
and in blocks of two. The machine runs fine with up to 2GB, but fails
when all three are in.
I have two identical machines (and two sets of 3GB RAM), which exhibit the
same problem, memtest failing at the same time.
The machines run P4 2.4Ghz processors.
Can you help?
Thanks in advance
Ewan

Hello
Goto the following link and see if this can give you some insight. Scroll down to the bottom of the page and it will give you configurations for that board. Good luck
http://www.ec.kingston.com/ecom/config/modelsinfo.asp
Quote
Originally posted by the_boat
Hi,
I have put three GB of RAM in a PC containing a MSI 648 Max motherboard.
The memory is 3 * PC2100 1GB of Samsung 266 DDR RAM. I've ran memtest
(http://www.memtest86.com) to test the chips to test the chips individually
and in blocks of two. The machine runs fine with up to 2GB, but fails
when all three are in.
I have two identical machines (and two sets of 3GB RAM), which exhibit the
same problem, memtest failing at the same time.
The machines run P4 2.4Ghz processors.
Can you help?
Thanks in advance
Ewan

Problems with MSI 648 Max

I have problems with my sons MSI 648 Max Mainboard, everything seems to be alhright, but when I upgraded the BIOS version to the lastest. the computer starts to hang. I have also but a new harddisk in to the computer an some more RAM. I think the problem begin in the powersupply, its just a 250 W powersupply to the computer, and we have av 1.8 GHz Celeron. Have anything had this problem, or is it something I should think about after the upgrade of the BIOS?.

I know that 250 watt is to small, but the computer have function great in 2 months. But after i have taking out the old harddisk and but in a new bigger one, and placed some more RAM (256). After that I installed Windows XP on the new harddisk, but after that I upgraded my BIOS version to 1.4. After the upgrade of the BIOS the computer starts to freeze after a while. I tried to reinstall XP but the computer freeze under the installation. I have tried to switch back to older BIOS version, but I cant make it work. I have really hard to believe that the powersupply is the reason why the compter freeze.

MSI 648 Max and ipods? Prob's connecting.

Please can anyone help?
I have a MSI 648 Max board with on-board usb2 and have problems connecting to my 4G 20Gb iPod. I'm pretty sure it’s the USB connection that is the problem. Has anyone else had this? Can anyone suggest anything to help? This is my last port of call before I’ll have to folk out for a Firewire card which I really don’t want to do.
Thanks.

Thanks for replying .
I have used USB for a number of devices (Printed/Mouse/DigiCam) and have never had any noticeable problems. I’ve tried the disconnecting thing and it didn’t seem to have any effect.
I thought it might be something to do with iPod’s not liking on-board USB and decided to post a topic here to see if anyone else has had a similar problem. Doesn’t seem to be much talk of iPod’s though. I wondered if MSI knew of any problems.
I have been around a few iPod forums but not many people seem to be using on-board USB.
Keep the suggestions coming though. Thanks.

Intel 3.06GHz on MSI 648 Max L

Similar Messages

Maybe you are looking for