Intel D946GZIS network driver - problem

I'm trying to get Zfd 4.01 ir5 to work on the abovementioned board,
which has an internel intel(r) 82562G integrated adapter, which is not
recognized by the kernel.
ifconfig gives nothing back, i've tried insmod -f e100 / e1000 (with paths),
but this gives back "init_module: no such device".
intel however, distributes packages containing only the e1000.ko file,
but this is only usable on newer (2.6) kernels.
Kernel version we're using is 2.4.32-pre3.
Does anybody know which module is needed for this adapter?
ir7 is (currently) not an option, since we're in a bit of a version
freeze for Zfd at the moment (I'm calling it "being scared of change").
Any help appreciated!

When trying an old eepro.o module, I'm getting "init_module: Device or
resource busy" ..
I found an old Redhat 7 thread that describes a problem with the eepro.o
module
and the initialization of the hardware, but the mentioned fix doesn't work.
On Tue, 17 Oct 2006 09:04:43 +0000, Turrekens Jurgen wrote:
> I'm trying to get Zfd 4.01 ir5 to work on the abovementioned board,
> which has an internel intel(r) 82562G integrated adapter, which is not
> recognized by the kernel.
>
> ifconfig gives nothing back, i've tried insmod -f e100 / e1000 (with paths),
> but this gives back "init_module: no such device".
>
> intel however, distributes packages containing only the e1000.ko file,
> but this is only usable on newer (2.6) kernels.
>
> Kernel version we're using is 2.4.32-pre3.
>
> Does anybody know which module is needed for this adapter?
>
> ir7 is (currently) not an option, since we're in a bit of a version
> freeze for Zfd at the moment (I'm calling it "being scared of change").
>
> Any help appreciated!

Similar Messages

OS X + Network Drive problems

I have two usb hardrives connected to an airport extreme and it works great until i close the lid of my laptop. When i turn my computer on from sleep/hibernate mode it pops up an error message saying "Network drive interruption" then i cannot connect back to that network drive for atleast 5 - 7 minutes. What can i do to resolve this problem or speed up the process of reconnecting to disconnected network drives?

I suspect the problem may be because if you are using wireless, then Airport is turned off when you put your computer to sleep. This disconnects you from the wireless network. That may be the reason for the interruption message. If this is why the problem occurs then a solution is not to put the computer to sleep or dismount the networked drives beforehand.

Intel HD 5500 driver problem after upgrade to Windows 10

i have upgraded to Win 10 and the original intel 5500 driver didnt work then i had to upgrade the driver from device manager / so i updated the driver but after a restar i got a black screen i went to safe mode and removed the driver but still stuck @ black screen // i downloded the last driver from intel web site for windows 10 but still the same issue i checked the driver page for my mode p211ne but only a wireless monitor update and wireless button

the problem has been fixed by 1- reinstalled win 10 2- win 10 removed intel hd 5500 driver as expected , but i didnt update it manually nor by update from device manager nor make any changes , so i ran windows 10 update tool from system and made all 100% update after restart things are ok now every thing is ok and new intel hd 5500 driver has been installed by win 10 update tool : 10.18.15.4248 //driver date : 29/06/2015 also invidia 840m driver has been updated thanx for any try to help and if any one still stuck with black screen the problem is that win 10 read two monitors instead of 1 so you have to click "windows button + P while black screen already on " and try to hit and click on first choise or other choises till you can see the desktop , sure u cant see any thing while u are trying to choose but you should try or may be you connect another monitor or tv and fix this issue by win button + P good luck

M 8215 D1U network driver problem

Installed a new hard drive (old one crashed), loaded Win XP Pro no problems. Trying to load network driver first so that getting other drivers would be easier. Used q37z53usa download from Lenovo. When I execute SETUPBD per instructions I get an error "..... is not a valid Win32 application". What am I doing wrong or what else can I try?
Thanks, Kevin

Quote
Originally posted by Stain
nforce420
I think there is a option to disable the network bandwith reservation from Windows XP . This should help.

Import to network drive problem

I tried to import from my camera to my external hard drive that was plugged into my airport extreme. while importing, the external disappeared from my desktop, and the computer had apparently lost connection to the external. imovie however, continued to import, but it was importing to somewhere on the local HD, instead of the networked drive. i have looked in all of the obvious places for these approximately 15 GB of files, but i can't find them anywhere.
i have tried this twice, and both times it happened. i won't be trying this workaround for importing directly to a USB 2.0 external HD in the future because it clearly doesn't work, but now, i'm out of room on my computer's HD, and i have no way to find the files to move/delete them. any idea where imovie put these files? thanks for your help!
camera: canon vixia hf100

This is my post and I'm new, so I may not be providing the answer in the "usual" manner. (Feel free to educate me!)
Solution:
The mounted volume on MacBook is /Volumes/photowork. Notice the lowercase 'p' in photowork. In LR I had selected a mount point
with *uppercase* 'p'. See screen shot. Summary: The already-selected mount point was /Volumes/Photoshop. LR had no complaints. When
I changed the mount point to /Volumes/photowork LR imported as expected.
This only became an issue since the upgrade, as I simply never tinkered with mount points and so on. This archive
server has files back to 2000 on it. Thanks so much to those who responded.

ITunes library on network drive problems

Library source folder (on my network drive) defaults to the original folder locaton on my iBook after an, as of yet, undetermined time. How do I define the library source folder for iTunes on my network drive and force it to keep that location?
Thanks.

On startup, iTunes checks the presence of the 'iTunes Music' folder as set in Preferences>Advanced>General.
If it doesn't find it, it will reset that location.
There is no way of forcing iTunes to keep the location.
iTunes must have a folder to store the next imports. That's the reason why it resets the location if it can't find the designated 'itunes Music' folder.
Always be sure your network drive is available before running iTunes.
Hope this helps.
M

Help Network Drive problems with Itunes

Can anyone help me!! I use a Maxtor shared Drive with various Roku soundbridges around my house.
What i want is Itunes to always put my music in my shared storage Drive (HOME:My Music:itunes.i tunes music), but everytime i restart my Machine i get
the standard itunes Directory.(MacintoshHD:users:me:music:itunes:itunes Music)
does anyone know how to solve this
Regards
David Stephens
imac G5 Mac OS X (10.4.1)

I'm using both itunes for Mac and iTunes for windows, I have a network drive that I have all of my music on. iTunes for windows reconizes the networks drive and all of the music. on iTunes for mac if you go to iTunes, prferences, advance you will find the folder on which all of the music is being stored. Have you tried that?
Further more I have not being able to link my iTunes for Mac to my network drive. when I tried it I had to first look for the network drive, connect to it and then from iTunes look for a folder to add to library. when I did that, itunes tried it to copy all of the music to the computer's hard drive, which I do not want. Do you know how to map a netwrok drive on to a mac computer?

Network Drive problems with Fast User Switching

I have a USB drive connected to my Time Capsule and shared to the network. On one of my computers (Mac Pro) I have 2 user accounts which access the data (music, photos). The first one to access the drive after a power on has no problems, and everything works perfectly. However, if I Fast User Switch to the other account, it can see the drive but cannot access it (permission problem apparently). I then have to click the disconnect button in finder, and reconnect, and then can use it again fine. Then when I switch back to the first account its the same deal, having to disconnect and reconnect. It is really annoying, since it marks all my itunes songs as missing and whatnot. Does anyone know how to fix it?
Thanks!

Yes, under Sharing in System Preferences both users have been added to full access of the drive. I had to do that for the non-admin account to be able to access it at all.

Intel 945GM display driver problem after installing Vista on A100 PSAA8

After upgrading to Vista on Satellite *A100-207 PSAA8E-180049EN*, display adaptor "*Mobile Intel(R) 945GM Express Chipset Family*" does not work. In Device Manager, it reports "*This device cannot find enough free resources that it can use. (Code 12)*". Using the Vista driver on Toshiba Website and also tired latest driver from Intel Website to no avail. Re-installed all Vista drivers in the order recommended on Toshiba Website. Also tried multiple removals and re-additons of various drivers to no avail.
If someone out there has the same model, I would appreciate if you could send a snapshot of device manager screen (collapsed to show sub-devices under main devices). Also a second snapshot of device manager showing resources (Device Manager / View / Resources by type). My e-mail address is: [email protected]
Greatful for any other ideas or suggestions.

Problem resolved by a fresh install of Vista followed by all Vista drivers in order as described in the document on the Toshiba website. Thanks to all who reviewed this question. Don't hesitate to e-mail me for details at [email protected] Happy New Year!

(Self Solved) HP Pavilion M7 Intel HD 4000 Driver Problem & Question

I...i am kinda mad.
Ever since i formatted my laptop a few months ago, in ANY Game i play, i CANNOT choose (or even SEE for that matter) a 1280 x 720 resolution option. Before i formatted, i could see it all the time.
If its a Fan Game (Doujin), i can see it because its not a retail game and its graphical options are dependant on the game itself, and not ur system.
But any retail game, i cannot see a 1280 x 720 resolution option.
Everything else works PERFECTLY fine, but this right here is annoying.
When i went to see my driver version for my Graphics card, it was set at 1/21/2012...
...What...Why?
And the same thing when i checked the Drivers download page here, 2012. Everything.
Why? Why are u guys only at 2012?
The official Intel Page has Drivers up to 5/21/2014.
Why are u 2 years behind when updated drivers can EASILY improve my performance and experience.
I cannot even manually install them because my laptop see's the OEM Drivers as the "newest".
This is drastically reducing my peformance and i beleive this is happening ever since i updated to your "Newest" Driver (2012).
I would like to know if there is a workaround for this and at the same time, why your lastest drivers are only 2012, when intels newest Drivers are set at today.
Update:
Nevermind, solved it myself, rolled back my driver to base and manually updated.
Still HP, theres no excuse to only have 2012 Drivers guys, after i updated i saw like 6 more Resolution Options in all games, and my FPS in games dramatically boosted , 2 - 3x's. and my PC's actual performance increased as well. Update guys, update.

Hi,
HP has version 10.18 but only for Windows 8.1:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=ob-124655-1
I think for Windows 7, the testing process is still going before release to public.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

MDT2010 deploy and Thinkcentre network driver problem.

I can`t get a Lenovo ThinkCentre to run a sysprep or deploy a image. It can`t find the network card driver.
Someone here now where to download this driver ? It is a realtek driver and I already download from Lenovo site and Realtek but no go ?
pci\ven_10ec&dev_8168&subsys_307C17AA&Rev_06
Br Daniel

Hello again.
Sorry I have probably not explanined this well enough. What I am working on is to run a sysprep/capure or deployment to the Lenovo ThinkCentre not runing MDT 2010 on it. This is the error i get.
Wizard Error
A connection to the deployment share
(\\server\DeploymentShare$)could not be made.
The following networking device did not nave a driver installed.
PCI\VEN_10EC&DEV_8168&SUBSYS_307C17AA&REV_06
I have fund out that the deployment is working fine if it is Windows 7 32bit. Sysprep/Capture and deployment of Windows 7 64bit from MDT 2010 is no go.
The pc is a new Lenovo ThinkCentre M1578-D7G running Windows 7 64bit. I have also captured the driver from the machine but still no go.
Al this problem was the same I had on the Lenovo Thinkpad T410, There I had to use some default Dell network card driver.
btw. I having no problem to Sysprep/Capture or Deploy to my servers (IBM/Dell) og other laptops and desktops (HP/Dell/IBM)
Please help Lenovo.
Br Daniel

Mac Mini Mounting Network Drive problems.... weird

Okay 2 Mac minis. Older G4/1.33/512/40/Combo, 10.4.11 Not as old C2D/1.83/2gb/80/Combo. First one mounts SMB shares from a NAS store no problems.
2nd one (newer) does SOME of the shares and not others. Will see, connect, mount and place icon on desktop. As soon as I click th icon on desktop or side panel in finder, it clears screen, closes the windows that are that open. Other mounted shares it will open and use. Its the same ones each time that cause the problem.
Anyone no why? Have checkled all network settings on both machines and there both identical in evy way. Connecting using same user name and password.
Hellllpppppp

You could try reinstalling the OS?

MOVED: Network Driver Problem

This topic has been moved to Intel Core-iX boards.
https://forum-en.msi.com/index.php?topic=163944.0

OK:
Let's try this...
Download and run this driver again.
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6559745&swItemId=vc_140782_1&swEnvOid=405...
Now, go to the device manager and click on the ethernet controller needing drivers.
Click on the driver tab. Click on update driver. Select the Browse my computer for driver software option and then at the bottom of that window, select the Let me pick from a list of device drivers on my computer.
Then click on Have Disk and browse to: C:\SWSetup\sp69909\WIN7\64\hp64win7, and select the Realtek PCIe GBE Family Controller from the list of ethernet controllers and see if the driver installs that way.

P2050 on 2008 network - driver problem

Hello,
I am using Server 2008 Print and Document services and have successfully added the HP p2050 x64 and x86 drivers to the server.
When from a client I add the network printer the printer installs OK but attempting to print or display the properties displays and error message.
"Function address caused a protection fault exception code 0xc0000005"
The printer is working fine as a local printer to the server and also as a local networked printer (but not managed by the server) on the clients. I found an application on HP drivers site "HP Install Network Printer Wizard" is this something I should have used?

I'm having this same issue, but sharing from Windows 7 Home Premium to a Windows XP client.

Problems setting up Time Machine using a network drive

I am having problems setting up TimeMachine on my Mac Mini to work with a WD MyBookLive network drive. The network drive came with a TimeMachineBackup shared folder preconfigured. When I first connected the drive to the router and turned on TimeMachine, the TimeMachineBackups appeared as an option when I did "Select Backup Disk" from TimeMachine Preferences.
I managed to successfully connect to the drive and start a backup running. However the backup hit a problem and I started getting an error that the "disk was already in use". I therefore tried to remove the disk to try and start again. Hoever when I now do go into "Select Backup Disk" from TimeMachine Preferences the shared folder on the drive no longer apperas and I only get the option to serach for an Time Capsule.
If I go into Finder, the MyBookLive shows up as a connected Device with all its shared folders showing (including the TimeMachineBackup folder) and my Mac is definitely connected to the drive. How do I get the Drive & TimeCapsuleBackup shared folder to reappear in TimeMachine Preferences so that I can select it as the destination for my backups?

Check around the forum, you are one of very very many. It doesn't matter what WD say, do you see a Certified by Apple notice on it?
Go here, most authoritative site about Time Machine you can find. http://pondini.org/OSX/Home.html
Specific info on Network Drives are here http://pondini.org/TM/2.html
Post back here and ask for Pondini if you need more.
You can also read some tales of woe here

Intel D946GZIS network driver - problem

Similar Messages

Maybe you are looking for