Interactive Reporting Dashboard Template

Hi All,
As part of next assignment we would like to develop Interactive Reporting Dashboards. I'm very new to Interactive Reporting.
I'm looking for Template which gives an idea how to gather the Requirements for Interactive Reporting Dashboards..
Could someone suggest me how to gather the requirements....
Thanks & Regards,
Suresh

Wayne has been using IR for over 8 years.... he's god
in IR..... 'cos when I read the post, I don't think
it's possible either...
Well... I'm not alone :-)))
I'm only thinking the same as what you're thinking,
having a navigation bar or command buttons for
jumping to sections using activate command.Problem is that I have to pass some parameter taken from the row the user click to change the filter applied in the target frame, I'm used to build web apps and to have complete control over the page content... IR dashboard is a bit of a straitjacket for me :-D
Have a good day
Gianluca

Similar Messages

How To Schedule an Hyperion Interactive Reporting Dashboard

Hi . Can somebody let me know on how to schedule an Interactive REporting Dashboard Report and Export the output in PDF and Email the user.i can see the output in HTML when i schedule a pivot, Chart but i dont see anything when i try to schedule a Dashboard . Any pointers in Greatly appreciated

Once you have the dashboard scheduled to run/ process your queries.
Go to run the job. In there you will need to edit the cycle by clicking on Modify
(This will open another page)
Under the Actions sections there is a part that says
Add a(n) select the drop down that says Email Section.
This will take you to anther window where you can select the section you want to output (in your case the Report)
who to send it to and what format you want to send it in (default shows Microsoft Office Web archive).
Hopefully this will help you.

Setting default page in Interactive Report Dashboard (Version 9.3.1)

Does any one know how I can set the default page (to be the first page) in Hyperion Interactive Report Dashboard version 9.3.1?
I have a report with dashboard that returns 56 pages (and the user scrolls down to page 8 of page 56) and selects a filter (which only has one page of data). However, since the user had scrolled down to page 8, the default page remains at 8 and when the user scrolls up, he/she sees blank pages (thereby causing Servlet error which Hyperion has identified as being reproducible and a bug).
They have recommened that I use the onClick event trigger for the Set Filter command button to always default the page to 1 (when the set Filter button is clicked). This will put the user on page one always and prevent the Servlet error (and them seeing unnecessary blank pages).
Any help will be greatly appreciated!
Thanks in advance
Nancy

Does any one know how I can set the default page (to be the first page) in Hyperion Interactive Report Dashboard version 9.3.1?
I have a report with dashboard that returns 56 pages (and the user scrolls down to page 8 of page 56) and selects a filter (which only has one page of data). However, since the user had scrolled down to page 8, the default page remains at 8 and when the user scrolls up, he/she sees blank pages (thereby causing Servlet error which Hyperion has identified as being reproducible and a bug).
They have recommened that I use the onClick event trigger for the Set Filter command button to always default the page to 1 (when the set Filter button is clicked). This will put the user on page one always and prevent the Servlet error (and them seeing unnecessary blank pages).
Any help will be greatly appreciated!
Thanks in advance
Nancy

Web client and desktop client not available for Interactive reporting 11.1.2.2

Hi team,
Currnetly we are usning EPM 11.1.2.2 , we are trying to install and configure
Interactive reporting in Linux 64 bit system.
we are few questions jotted below:
Interactive reporting studio client & Interactive reporting Dashboard Development Studio client are disabled.
post installation we are not able to see IR Client folder in <EPM HOME> location.
while launching workspace we are not able to see the WEB Client Interactive reporting under TOOLS-->INSTALL.
we read in a blog, which states it Interactive reporting needs a license. whether it needs any special License for using it?
we downloaded the Entire Dump of EPMS 11.1.2.2 from Oracle Edelivery website.
Kindly let us know we are missing any where?
we are strucked at this point.
Regards
Chinu

If you want the 11.1.2.0 assemblies you will need to contact Oracle as they have been removed from edelivery.
Cheers
John
http://john-goodwin.blogspot.com/

How to know a table column name in HTML (Hyperion Interactive Reporting).

Hello,
I have a Hyperion Interactive Reporting dashboard section with an embembed table section on it.
The dashboard it will be open only in HTML.
I put the table as Active, so i can interact with her.
So, what I need to know now is how can I know the column name or number when I double click in one cell of the table.
Can anyone help me with this?
Thank you in advance,
Carlos

Views don't have primary keys though their underlying tables might. You'd need to pick apart the view to determine where it's columns are coming from.
You can select the text of the view in question from user_views.

User Interface Template for Interactive Report Region

In 3.2, where do we set the user interface template for Interactive Reports region?
No matter what out of the box theme I switch to, the Interactive Reports region shows the same. What and where do I change the template so that alternating rows use two different colors?

There is no template for Interactive Reports like for a "normal" report. You need to modify the CSS and supply your own for this to happen.
I believe most things are tagged with #apexir - firebug with Firebox is invaluable. This thread may help:
Re: changing the look and feel of interactive report.

How to customize an interactive report PDF using a BI Publisher template

Hi,
I am trying to figure out how to get an interactive report to work with BI Publisher. I want it so that I can create a custom RTF template with custom headings, and then apply this for the interactive report.
On the front end, when a user runs an interactive report, they are able to hide and show columns, and then click on Actions > Download > PDF. I want this to access the custom template and return a PDF based on this template, and also showing the columns that the user has selected in the interactive report.
I have already created a custom RTF Word Doc in BI Publisher, and have uploaded it into a report query created in Apex. I am not sure though how to apply this report query to an interactive report, or if that’s even what I’m supposed to do to get it to work the way I want it to.
When editing the Report Attributes, under Print Attributes, there is a section called Printing.
Under this, there is a "Print Server Overwrite". I thought this is where you can specify your report query. But I am not sure if I even need a report query because I don't understand why you have a report query that is based on a static query, when in an Interactive Report, the user can hide columns.
I have Apex 4.0.1.00.03 and Oracle BI Publisher 10.1.3.4.0d installed.
Thanks,
Gage

Hi Gage,
Custom RTF and XSL-FO templates are currently only supported with classic report regions and report queries, but not with interactive reports. So you would need to create a report query based on the SQL statement you used for your interactive report and then associated your template with that report query. Unfortunately you won't be able to use any of your customizations, filters, or column selections this way. We're planing to support report layouts with interactive reports in the future.
Regards,
Marc

How to use Templates in Interactive Report?

Hi,
I have migrated a report into interactive report, but the template used in earlier report are not applying into new report? Could you pls tell me how can i do that?
Thanks,
-Amit

Hi Amit
Interactive reports work differently than classic reports - the formatting is controlled by the AJAX controls - not by fixed templates.
While interactive reports have brought some wonderful new possibilities, there may well be times when you'll want to retain the more rigid, formatted look of a classic report.
You should choose what the purpose of the report is, and what facilities you want to offer your user - this will guide you to choose an interactive or classic report.
Both have their place in applications.
In summary, the short answer to your question - there is no direct equivalent of the report formatting template in interactive reports.
Hope this helps.
Mike

Interactive Reports - Problem (possible bug) with button template?

Hey all,
I possibly noticed a problem with the use of the button template of the search bar in an interactive report.
When I for example choose 'Button Alternative 1' as Button template and then save my report then it looks perfect.
When I now Export/import my application, I loose the button template of my interactive report, if I open the report attributes it isn't selected anymore.
Does anyone else have this problem?
Apex version: 3.1.2.00.02
Kind regards,
Oli

Oli,
Thanks for bringing this up. One of my beta testers just called to say that two of our IRs weren't showing the Cancel or Apply buttons at all. But the third IR worked fine. In my Alpha version, all three had Buttons as the selected style, so I'm a bit confused what went wrong.
But now I'm thinking if the fact that I had multiple themes defined in the application might have caused the confusion. I didn't deploy the themes from Alpha to Beta because they were all based on Theme 13, and I thought my extensions were included in the application export (which I didn't realize until recently). I'm guessing that if I drop the extraneous themes on Alpha and re-select the button theme, I should be okay when I deploy again?
I just dropped the extra themes in my Beta and the IRs button theme was undefined again, so I'm thinking they were pointing to the wrong "button" style. Hopefully cleaning up in alpha and changing these buttons will resolve this and I won't have deployment problems!
Wish me luck!
Stew

Create new Interactive Dashboard Templates

How do I create new Interactive Dashboard Templates which would include fix style, colors, graphs, fonts, table style, etc. Guru's Can you please provide me white paper or documentation or guide me through this?
Thanks

Hi Gurus: Can somebody will give me proper direction? Thanks

Interactive Report: E-mail Template?

All,
Is there any way to edit the template used for e-mailed versions of interactive reports?
Specifically, I'd like to change the line that says <base href="http:///" /> to point to our server, so that links in the report data continue to function. Is this possible?
Thanks,
-David

Interactive reports are pretty well sealed up. At this time, I do NOT believe you can modify the mail template used in them...
Thank you,
Tony Miller
Webster, TX
Follow your passion; the rest will take care of itself.
JMS
If this question is answered, please mark the thread as closed and assign points where earned..

Interactive report template

Hi,
How can I change the template for interactive reports? Can I use a custom template for an interactive report?
Regards,
Eugene

Hi,
BTW, if anyone cares, you can still include the sortable column headers into the Row Level templates. Basically just copy the header out of the Column-based Report template and paste it into your custom Row-Level template.
For example:
<th#ALIGNMENT# foobar id="#COLUMN_HEADER_NAME#" class="t13ReportHeader">#COLUMN_HEADER#</th>I had a gotcha with mine where the column header section started indented one column to the left, due to something in the region header (I guess?). I couldn't figure out how to fix it without a kludge. So I simply closed the previous table row then started a new one by pasting it into the region header.
</tr><tr>Inelegant but functional! :-/
Just trying to pass on little hacks as I learn.
Your mileage may vary...
Stew

CRM interactive report

hi ,
Can we provide a BI WEB Template in CRM interactive Report. I mean in the SPRO setting in the CRM system there is an SPRO menu option to provide single query id .Can we provide a web template in the SPRO setting of the CRM system. I want to execute a dashboard report as part of CRM interactive report ie the dashboard has to be executed in the BI system of the CRM box.
Any document in this regard shall be highly appreaciated.
Looking forward for your support.
Thanks
Nitin

Hi Nitin,
you can read out the best practice document C41 which is releated to CRM Interactive Report. this is a link for best practice document.
|http://help.sap.com/bp_crm70/CRM_DE/HTML/index.htm]
Vishwas Sahu

Interactive report column filters to display differently than column values

Greetings...
We use images a lot in our interactive reports to provide a visual representation to a status, or something locked for update, or what-have-you. By default, when a user clicks the column heading of a column which contains images, the drop-down list that shows up displays the actual images, which is nice for the user to identify exactly which thing they want to filter on. The problem is when the user selects on of the options in the filtering drop-down, the resulting condition that is displayed under the interactive report search bar is the HTML code of the image. I'd like something else to display there because showing the user the HTML code is atrocious.
I didn't think what I want is possible, but then I came across the Page Locks page within ApEx (page 4000:291 in ApEx 4.0.1) which displays a list of all the pages of an application and whether they are locked or not. It also allows you to bulk lock or bulk unlock a bunch of pages. That page uses an interactive report with a column called "Status" which contains images that represent whether the page is locked or not. When you click the "Status" column heading to filter, instead of seeing the images of an open and closed lock, you see the words "Page Locked" and "Page Unlocked." And even better... when you select on of them, the condition that is displayed to the user is very user-friendly.
Can someone tell me how this is done so I can replicate it in my own apps?
Shane.

Why not create the IR using the text you require e.g. 'Lock', 'Unlock' and then use JQuery to replace the text in the report with the image you want. All the filters should then show the plain text and the report will display the image. e.g.
http://apex.oracle.com/pls/apex/f?p=46801:1
Here's what I did:
Firstly make sure the IR has a region template.
Then create a Dynamic Action with the following attributes:
1. Advanced
2. Event: After Refresh
3. Selection Type: Region
4. Region: [select the IR Region]
5. Action: Execute JS Code
6. Fire on page load: [checked]
7. Code:
$('td [headers="TEST"]').each(function(index) {
if ($(this).text() == 'Lock') {
$(this).empty().html('<img src="/i/htmldb/icons/locked_small.gif" alt="Lock" />');
else {
$(this).empty().html('<img src="/i/htmldb/icons/unlocked_small.gif" alt="Unlock" />');
});Where TEST is the column name.
That's it, this may also be of interest:
http://simonhunt.blogspot.com/2011/10/adjusting-interactive-report-column.html
I hope it helps
Shunt

"no data found" message wrapping in interactive report

I've looked around and can't figure out what's going on. Any help would be greatly appreciated.
I have an interactive report which, when no data is found, displays the "no data found" message wrapping very tight. I have uploaded a screenshot of it to TinyPic for you to see what I see.
The HTML generated around the "no data found" text is the following.
>
<DIV id="apexir_DATA_PANEL">
<TABLE summary="">
<TBODY>
<TR>
<TD>
<TABLE id="12352007490697832" class="apexir_WORKSHEET_DATA" border="0" cellSpacing="0" summary="" cellPadding="0">
<SPAN class="fielddata">
No submissions were found in the system.
</SPAN>
</TABLE>
</TD>
</TR>
</TD>
</TR>
</TBODY>
</TABLE>
</DIV>
>
I've looked through the HTML code that is generated for that page, but can't figure out why the words are wrapping. Any thoughts?
Shane.

Well, my problem is back again. It is only doing this in IE 8, not FF. When I run IE 8 in "IE 7" mode, the error message shows up fine, all on one line. I actually have two span tags now so I can have some spacing around the "no data found" message. I cannot get the "span" tags to show up in the HTML code. The software for this discussion forum seems to be filtering it out or the web browser is interpreting it when it should not. I will replace the SPAN tags with square brackets so you can see them. I also had to change "style" to "st_yle" so the software did not filter it out. It sure looks like a jumbled mess now.
>
<DIV id="apexir_DATA_PANEL">
<TABLE summary="">
<TBODY>
<TR>
<TD>
<TABLE id="12352007490697832" class="apexir_WORKSHEET_DATA" border="0" cellSpacing="0" summary="" cellPadding="0">
[SPAN class="fielddata"][span st_yle="padding: 15px;"]No submissions were found in the system.[span][SPAN]
</TABLE>
</TD>
</TR>
</TD>
</TR>
</TBODY>
</TABLE>
</DIV>
>
Since I am using an interactive report, I do not believe I have any report template I can alter to adjust how the report and/or "no data found" message are being drawn up. I do have the region of the interactive report set to "Reports Region 100% Width", but the HTML in question is not being generated by that template.
I wonder if the problem is specific to how IE 8 might be interpreting the inside TABLE tags when it does not have any TR or TD tags within it. Any further thoughts on the matter?
Shane.

Interactive Reporting Dashboard Template

Similar Messages

Maybe you are looking for