Interface Mapping with out SWCV ?

HI Guys,
is it possible to create an interface mapping in the XI Repository even without a software component version and a message interface.
Actually i have developed a Proxy-Soap synch scenario and now we got the need to change our namespace name and the interface name. Is there nay way that i can change the namespace and the interface name wiht the existing mappings
any help would be appreciated
Thanks,
srini

Hi Srini,
>>>is it possible to create an interface mapping in the XI Repository even without a software component version and a message interface
Neither nor.
>>>Actually i have developed a Proxy-Soap synch scenario and now we got the need to change our namespace name and the interface name. Is there nay way that i can change the namespace and the interface name wiht the existing mappings
You can copy single objects and all of one namespace to the other. The linked objects have to be changed manually.
Regards,
Udo

Similar Messages

Multi mapping with out BPM

HI ALL ,
I am trying to do multi mapping with out using BPM .I will get message from the sender and i need to send that to two different target system. I have defined the mapping in the IR . In ID i have created the configuration scenario and i have created the receiver determination .In receiver determination i have selected "EXTENDED" and when i select input help for mapping name it says "NO Object found". What else should i do get the mapping program here .
Regards,
Tarun.

Bhavesh,
I'm sorry but if he needs 2 different receivers, then it's not the case of using Enhanced Interface Determination.
sapuser,
if you scenario is asynchronous, then it's easily implemented.
But it won't be achieved with multimapping.
You'll have 2 receivers in receiver determination (normal RD, not enhanced). For each of those, you'll have to create a separate simple mapping (that will generate the message expected at each receiver system) and refer that mapping in the interface determination of each receiver.
For example, you have input_message containing data1 and data 2. You'll have 2 simple mappings (not a multimapping), 1 generating output_message_1 containing data1 and the other generating output_message_2 containing data2. Then refer those mappings in the proper interface determinations.
Regards,
Henrique.

Mapping with out bpm

hi...guys
how we will do 1:n multi mapping with out using bpm , pls explain..
with regards,
Prasad.

Hi Prasad
Go thru the forums given below.. which will discuss the same...
1:N mapping without using BPM
Re: 1:N mapping without using BPM --> IDOC to multiple files
Cheers..
Vasu
** Reward Points if found useful **

Interface-Mapping with a Fault Message Type

Hi,
we have an abap-proxy and some messages generated errors. The errors can be displayed via sxmb_moni. The proxy raises an "Application Error (Restart possible)".
Now I wanna transform the generated fault message (of the proxy) with a message mapping and send the output to a file.
My problem is, that it is not possible to define an interface mapping with the fault message as well as it is not possible to define a receiver determination.
Any ideas?
Thanks a lot
Regards
Wolfgang Hummel

Hello
As far as I know you can propogate the application error back to the calling application only in case of a Synch Interface? Are you making a Synch call where the proxy triggers a fault message, if yes then all you need to do is to make the change in XI to have the fault message for both the outbound and inbound message interfaces and then a corresponding fault message mapping and select this in the Interface Mapping and then the fault message will be sent to the source / calling application.
In the case of Asynch calls I don't think this is possible until you use a BPM. Have not tried this myself though.
Regards,
Bhavesh

Define Inbound Interface for Interface Mapping with Java functions

Hi,
we are developing an R/3-XI-ITK-SBO system. We realized our SOAP component as custom java functions and we installed it on ITK.
We need to import and configure these functionality in XI because we need to reference to it when we define the Message Interface and the Interface Mapping in Integration Builder Design.
Someone is able to tell us how we can import and configure these java function or definition in XI?
Thanks in advance.
Best regards.

Hi,
INBOUND:
Step 1. EDI Subsystem creates an IDoc file from EDI Messages
2. Subsystem calls Functional Module EDI_DATA_INCOMING from startRFC program.
3. Data in Control Record is validate against the Partner Profile.
4. IDoc is generated in Database and syntax check is carried out.
5. IDoc file is deleted once file read.
6. Event PROCESSSTATE REACHED is triggered in Idoc Object Workflow.
7. Check for Process Immediately.
If NO
Execute RBDAPP01 Program
Else
Read Process Code from Partner Profile
Process Code Points to Function Module
Application Document Posted.
further help:
check url
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/ale/configuration.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapdevelopment.co.uk/training

Interface Mapping with Multiple Message Mappings

Hi My Scenario is
File to Idoc.( Multiple records to Multiple idocs )
Due to Complexity of Mapping I split the Mapping step into 2.
My Source System does not provide Namspace when they are sending XML Data.
When I try 2 mappings individually both Mappings works fine.
However when I try test using Interface Mapping target messages are not generated.
Since 2nd Mapping invoves Mapping Split its expecting extra tags as shown here in the Targert Message generated from Message Mapping 1.
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
 <ns0:Message1>
How can I solve this problem ?

When I do Message Mapping:
From message Mapping 1 target Produced is as follows:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:CostMaintenanceXI xmlns:ns0="http://test.xxx.com">
<CostMaintenanceXI>
<CostMaintenanceXI>
<Product>000000000000000023</Product>
<Plant>1401</Plant>
<Supplier>0000000001</Supplier>
<ValidityFrom>20021212</ValidityFrom>
<DIIndicator>ZFOB</DIIndicator>
<COGAmount></COGAmount>
<COGCurrency></COGCurrency>
<FreightAmount></FreightAmount>
<FreightCurrency></FreightCurrency>
<MISCAmount></MISCAmount>
<MISCCurrency></MISCCurrency>
<SPAAmount></SPAAmount>
<SPACurrency></SPACurrency>
<LandedCaseCost></LandedCaseCost>
<LandedCaseCurrency></LandedCaseCurrency>
<FrontLinePrice></FrontLinePrice>
<FrontLinePriceCurrency></FrontLinePriceCurrency>
</CostMaintenanceXI>
</CostMaintenanceXI>
</ns0:CostMaintenanceXI>
in 2nd Mapping I entered some details in the test tab and the generated source is as follows:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
 <ns0:Message1>
 <ns1:CostMaintenanceXI xmlns:ns1="http://test.xxx.com">
 <CostMaintenanceXI>
 <CostMaintenanceXI>
 <Product>1</Product>
 <Plant>1</Plant>
 <Supplier>2</Supplier>
 <ValidityFrom>12212122</ValidityFrom>
 <FOBIndicator/>
 <DIIndicator>ZFOD</DIIndicator>
 <COGAmount>10</COGAmount>
 <COGCurrency/>
 <FreightAmount>10</FreightAmount>
 <FreightCurrency/>
 <MISCAmount>10</MISCAmount>
 <MISCCurrency/>
 <SPAAmount>10</SPAAmount>
 <SPACurrency/>
 <LandedCaseCost/>
 <LandedCaseCurrency/>
 <FrontLinePrice/>
 <FrontLinePriceCurrency/>
 </CostMaintenanceXI>
 </CostMaintenanceXI>
 </ns1:CostMaintenanceXI>
 </ns0:Message1>
</ns0:Messages>
As you can see both of the above structures differs in xmlns. I dont see anything else weird.

Multi Mapping with out BPM and Receiver Determination Condition

Hi Masters,
My Requirement Was:
Proxy will send the data to XI system, Based Customer group number[1000,2000,3000,4000], I need to split the message into 4 messages, and sent to 4 Different location, based on Customer Group condition.
For message split, I fallowed below weblog.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Problem is file split correctly, but data goes to all customer groups..
EX
If they send the customer group 1000, I need to send the customer group 1000 file to BS1[Business Server1],
If they send the customer group 2000, I need to send the customer group 2000 file to BS2[Business Server1],
Please guide me,
Thanks,
ANU-

Hi,
Develope it like follow.
Source Structure- Same for everything.
Create 4 different structures for all targets, create 4 different msg types, 4 inbound message interface ( i think you are creating single Message type now, that is the mistake)
In message maaping, add 4 target message types in same MM.. i hope i am clear.. ( same like in blog /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible he has created 2 message types USER_1 and Employee)
keep occurence of all of them 0 to unbunded (not necessary)
Now create mapping for each message type (same like USER_1 and Employee, imagine them like different message types virtually).
Map message type with the source field and mention the condition which you want test using graphical functions. i will say if x e equla to 1 creatif --> target.
I hope i m clear till now...
thanks.

Exception Handling (in Mapping) with out using BPM

Hello All,
We are on SP17. I have a simple flow involving XI
JMS -> XI (Message Mapping -> XSL Mapping) -> Mail
I would like to send an email if there is an exception in any of the mapping. But I don't want to use a BPM for this exception handling. How can I do it?
Thanks
Abinash

Hi Abinash,
yes you can! See these..
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
/people/sap.user72/blog/2005/02/23/raising-exceptions-in-sap-xi-mapping
All the best!
cheers,
Prashanth
P.S Please mark helpful answers

Help for writing a Map with out JDeveloper

Hi all,
Where can I find help documents or sample files so that I can write a custom mapping between an Oracle Object and Java Object. Yeh, this might be a simple task when we use JDeveloper , but just for writing this small piece of code I am not in a position to download JDeveloper of size 230MB and learn how to use it...
Plese give suggestions...
Thanks in advance...
Sateesh
null

Take a look at the JPublisher user's guide. You can also download JDeveloper in 20MB chunks if you can't download all 230MB at once.
Blaise

Integration Process Referencing Message Interfaces In A Different SWCV

Hello Experts!
I am creating an Integration Process IP within SWCV A, using an Interface Mapping Object within SWCV A, Abstract Message Interface MI_A1 from SWCV B and Abstract Message Interface MI_A2 from SWCV B.
Because we have the dependencies set up in the SLD wherein SWCV A is a dependent SWCV of SWCV B, these basis objects can be referenced by the IP during the create process.
However, when I try to execute a "check" or activate the IP, I get the following error:
Expression must return the interface type MI_A1
Expression must return the interface type MI_A2
If I copy the MI objects into SWCV A, the IP is activated successfully.
The question is:
Why is it that while I'm creating the IP I am able to reference these basis objects, but the "check" or "activate" does not allow it? What is this error telling me?
Want more points? Appreciate any insight.

Thanks for pointing me to the right direction, Aamir.
It turned out that the problem was caused by one of the Message Interfaces used by the Interface Mapping. It had errors to where it was pointing to an inactive IDoc object. The bad MI caused the IM to be bad, that eventually caused the problem while creating the Integration Process.
Thanks again!
H.

Interface Mapping Not Found in Integration Directory

Hey guys!
I'am getting this error in the test configuration part of the integration directory:
"Interface Mapping: <Not Found> com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping"
I don't see why I should be getting this error since I have properly defined a message and interface mapping for the receiving interface.
BTW, I get this error when I use XSLT mapping. If I point my interface mapping to a normal message mapping, I get no error. Is there anything I am missing?
Regards,
Glenn

The weird thing is that when I test the the configuration in the Integration Directory, it is still looking for my old message mapping (the one i created using xi editor) even though I already replaced the referenced message mapping in the interface mapping to the XSL one.
Yes, I tested the interface mapping with the same data using the XSL mapping and there's no problem.
When I send the message though, I get an error saying "NO_RECEIVER_CASE_ASYNC" I really don't see why it should not recognize the receiver. I tried refreshing the cache but it still looks for my old mapping program...
:P

With out Interface mapping

Hi
I have a scenario like from SAP-XI-mainframe..My question is this poosible to send the data with out Interface mapping
venkat

hi,
sure it is
no need for any mapping (interface mapping)
just don't create it in repository and don't use
it in directory and your flow will work without it
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Defining input message Type for webservice interface with out input

Hi all,
I am configuring a scenario RFC -> XI -> Webservice. My sync webservice doesnot need any input. it genrates a random number which needs to be sent back to the RFC. How can i define an input message data type with out any data? As the interface requires both input and output data types in XI?
I tried a dummy data type with a single string input and didn't map it. but its not working because of name space issues. i specified a seperate XML name space in Message Type but i get a Target URL as the name space in the request which i provided in the SOAP reciever adapter.
Any help will be appriciated
Thanks and best regards,
Kulwant Singh

Hi
Can u chk the webservice request using test tools like stylus studio or xml spy and ensure that the same request is going out of XI .
make sure that you have changed the default xml namesapce in the target MT.
rgds
Arun

Is it possible to map the cmp fields of the entity bean with out dictionary

Dear sirs,
I have created the EJB project module and WEB Module. Now i have to map the CMP fields of the entity bean to the underlying table. Is it possible to map the cmp fields of the entity bean with out java dictionary? If yes how can we do that.
I have got some error while mapping an EJB's CMP fields to the table through dictionary. I was actually intended to map 79 fields but it gives an error that more than 64 fields are not allowed while building the dictionary.
1. Can you tell me what could be the possible reason?
2. Is it possible to map the cmp fields of the entity bean with out java dictionary? If yes how can we do that.
Kindly helo me,
Sudheesh K S

Hi,
Sudheesh please check up if the below link helps,there are other ways of writing the persistent.xml for container managed entity bean.
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/f695f0c84acf46a4e0b31f69d8a9b7/frameset.htm, probably in the studio you cannot browse through tables not in the java dictionary,but manually editing it may still solve the problem.
Also here is another link that specifies the databases supported by J2EE Engine.
http://help.sap.com/saphelp_nw04s/helpdata/en/66/a5283eeb47b40be10000000a114084/frameset.htm
The below link shows how to specify the database vendor and datasource
http://help.sap.com/saphelp_nw04s/helpdata/en/e1/67fc3ee241ba28e10000000a114084/frameset.htm
Hope you are able to solve the problem.
Do let us know if you come up with the solution.
Regards,
Harish
Message was edited by: HARISH SUBRAMANIAN

File to file with out message mapping and using variable substitution

Hi,
Can any one send me a scenario where we can have file to file scenario with out message mapping and where i can use variable substitution.
As of now i am using integrate configurations where i cant use variable substitution as the message does not reflect in integration engine. I need to populate time stamp between <filename><timestamp>.txt.pgp
I am as of now using configuration scenario.
The time stamp always writes before the last file extension.
Let me know your thoughts?
Thanks,
Chandra.

Hi Chandra,
u can use the Variable substitution even without IR contents also(Mapping....).
in the receiver communication channel just specify the path u want to access for a value...
eg: filename payload:mt_name,1,records,1,name,1
and in th file name give it as %filename%.txt... or vt ever ur requirement
Babu

Interface Mapping with out SWCV ?

Similar Messages

Maybe you are looking for