Internal disk space is low

I'm getting this error message on a 1TB time capsule that is connected to an imac with about 700gb on it. I can't find anything that tells me what to do to fix this other than delete everything on the capsule and start again.
I assumed the time machine system would make space by deleting older stuff but this doesn't seem to be the case. Is there any way to set this up?
Thanks
David

No replies - given up

Similar Messages

  • "Internal disk space low" warning question

    Last night I got the blinking amber light with the warning that Time Capsule's "Internal disk space is low". My hard drive is 1TB and has 375 GB of remaining space. My time capsule is 1TB and is used only for backing up my computer. How do I remedy this situation? Shouldn't I still have 375 GB left on my Time Capsule if it's just mirroring my hard drive? Any help would be greatly appreciated.
    Thanks!

    Bob, thank you for your answer! When will TC start deleting old backups and the green light come back again and amber light stop flashing?
    I have the same problem and tried resolving it through deleting some backups that i did not need. I have 1Tb Time Capsule with all latest firmware and recently got the amber light blinking and the message that the "Internal disk space is low. Your Time capsule is low on storage space". I checked and I have something like 58 Gb left. So I deleted some big files that I did not really need on TC via Time Machine interface - "delete all backups of ...". It should have freed up additionally more than 100Gb, but when I checked again the remaining disk space has not changed from 58Gb. I read in forums about how to get this free space by compacting sparsebundle via "hdiutil compact..." command in terminal, as discussed here - http://forums.macosxhints.com/showthread.php?t=84284
    Is this the only way to free space on TC? Is there an easier way to get it? Should I go for it or should I just wait until TC starts deleting old files, not to mess with the whole process?
    Thank you in advance.

  • "Available disk space running low.  Shuttting down session."

    I've been running into problems on a few machines that I have installed e-Load on. When I start the stress test, I get into a few iterations and then suddenly, the test will stop running and I get the following message:
    "Available disk space running low. Shutting down session."
    Questions:
    1.) What space is it referring to? The local machine or where the scripts are stored?
    I can't seem to figure it out. The machines have more than enough space where e-Load is installed, over 10 Gigs free.
    The scripts (repository) is on a shared network drive and that has 17 GB where the results are written to. Is there something I am missing?

    And the following output from the bin directory:
    Microsoft Windows [Version 5.2.3790]
    (C) Copyright 1985-2003 Microsoft Corp.
    D:\Empirix\EmpAppServer\bin>dir
    Volume in drive D is Application
    Volume Serial Number is DC63-8FB3
    Directory of D:\Empirix\EmpAppServer\bin
    12/06/2007 10:43 AM <DIR> .
    12/06/2007 10:43 AM <DIR> ..
    08/03/2007 08:08 AM 267 adminclient.bat
    08/12/2004 09:09 AM 3,638 admin_icon.ico
    09/12/2005 02:48 PM 185 cleanup.bat
    08/03/2007 08:08 AM 409 consoleclient.bat
    08/03/2007 08:08 AM 344 counterclient.bat
    08/03/2007 08:08 AM 222 dsclient.bat
    09/12/2005 02:48 PM 130 eload.url
    02/10/2005 04:47 PM 3,638 eloadurl.ico
    12/05/2007 07:26 PM 1,048,576 eload_ml.dat
    09/12/2005 02:48 PM 3,638 eload_play.ico
    09/12/2005 02:48 PM 3,638 eload_stop.ico
    03/15/2006 03:07 AM 779 EmpirixSupport.bat
    03/10/2006 03:54 AM 438 JbossService.bat
    12/06/2007 10:43 AM 4,710 JBossService.conf
    12/05/2007 07:26 PM 4,615 JBossService.conf.bak
    09/12/2005 02:48 PM 135,168 JBossService.exe
    09/12/2005 02:48 PM 884 log4j.properties
    02/21/2006 05:26 PM 1,836 profile.dtd
    08/03/2007 08:12 AM 45,056 QuickConfig.exe
    06/13/2006 05:48 PM 308 QuickConfig.ini
    12/10/2007 07:48 AM 16 randomness.dat
    05/02/2005 08:28 PM 33,305 run.jar
    05/02/2005 08:23 PM 4,854 run.sh
    12/06/2007 11:47 AM 0 StopStart.log
    24 File(s) 1,296,654 bytes
    2 Dir(s) 124,410,523,648 bytes free
    D:\Empirix\EmpAppServer\bin>

  • I am getting a notice stating that my Iphoto Disk space is low

    I am getting a notice stating that my Iphoto Disk space is low,what do I do.

    How much availalbe free space on your HD?
    OT

  • Receiving an automatic notification from Windows Server when disk space is low

    Hello,<o:p></o:p>
    Does Windows Server 2012 R2 have any such functionality built-in to enable monitoring of disk space?
    We have an old VB Script file that sends me an email when disk space gets low.
    Also, the following post discusses the topic regarding Windows Server 2008:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/c9878861-6ba5-4d3b-b6b0-6e4b33c41853/notification-when-low-disk-space?forum=windowsserver2008r2management
    I was wondering if there was any change regarding this in
    Windows Server 2012 R2 .
    Many thanks.<o:p></o:p>
    Keith<o:p></o:p>
    R K Howard

    Hi,
    Windows Server 2012 stays the same on that topic, you still need some kind of monitoring on your disk space.
    If you don't have a monitoring solution, like for example SCOM, you can for example with powershell do what you earlier did in VB script. Either you have a scheduled task that runs as often as you'd like, or you can utilize something called WMI eventing
    to trigger on an event 'disk low' but thats a bit more complicated.
    See below examples on some example scripts that you could use.
    https://www.simple-talk.com/sysadmin/powershell/disk-space-monitoring-and-early-warning-with-powershell/
    http://technet.microsoft.com/en-us/library/ff730927.aspx
    http://gallery.technet.microsoft.com/6e935887-6b30-4654-b977-6f5d289f3a63Hope
    this helps you!
    //Johan
    Microsoft Certified Trainer
    MCSE: Desktop, Server, Private Cloud, Messaging
    Blog: http://365lab.net

  • PLEASE HELP!!! disk space is low message

    i received a disk space is low message as i am working in my lightroom 5. i keep clicking ok and it does not let me get out of this screen. it is telling me i need to remove files or empty trash to make space. do i need to make space in lightroom or on my hard drive? please help, i have had this issue before.

    25% seems pretty arbitrary and unreasonable. 
    With today's drive that means on a 2TB drive I need to keep 1/2 TB free. That means I am paying for 2TB with only 1.5 usable just to use LR. In my case where I have four 2TB drive I have to have 2TB free or equivalently have an entire drives worth of space (4*500M) I should not be using.
    Even given that was true I get a similar message and it states I do not have at least 20M free on the drive where my catalog is. The drive where my catalog is has 800M+ of a 2TB drive free (exceeding the 25% rule). 
    And if you are talking about just the "C:" or "root" drive then I have a 250G drive with over 180M free. And neither my catalog or my pictures are on it.
    Still looking for an answer. 
    It is very annoying to be in the middle of an edit and have the message pop up and stop the edit. Then you have to clear the message, undo the incomplete edit and start over hoping the message does not come back.
    Any additional suggestions?

  • "internal disk space needs repair" Time Capsule error message

    I had successfully transfered my entire iTunes library to my TC. Worked without a hitch for a week.
    Today, I downloaded an album FROM iTunes. In the middle of the download, it froze. I noticed I was dismounted and my TC light had turned orange (now blinking) and I received the mesage "internal disk space needs repair."
    From what I've read on this board, I'm supposed to reformat my TC and start again. That's an unacceptable solution. Is there another way?
    Also does anyone have experience in archiving their TC? And will that preserve my precious (to me anyway) iTunes library?

    vwozniak wrote:
    Thank you, honestly it is all over my head!! Will pull out the books and see if I can figure out how to do what I need to do. But, thanks!!
    If you don't understand something, ask!
    Your backups are in a +sparse bundle+ on your Time Capsule's internal HD. That's what appears on your desktop and/or Finder sidebar when Time Machine is doing a backup (unless you've told the Finder not to show them). If it currently appears, just eject it, then right-click the TM icon in your Dock and select +Back Up Now.+
    For the +TM Buddy+ widget, click your mouse on the words "Click here" in my previous post (anything on these forums that's shown in blue or purple, and is underlined when your mouse passes over it, is a "clickable link" -- clicking on it will take you to that web page.
    On that page, click the Download button towards the upper right. That will download and install it. Then press whatever key or mouse button you have set up for Dashboard and select +Time Machine Buddy.+ You'll see a display like the one pictured on the web page.
    If it doesn't show the box with messages, click the "disclosure" triangle to the left of the word Messages. That should show the messages for the last backup attempt. Click in the message area, and it should be outlined in blue (as shown on the web page). Then click Cmd-A to +Select All+ (and the whole background will turn blue), then Cmd-C to Copy to your clipboard.
    Then come here to post a reply, and when this box is outlined in blue, press Cmd-V (or select Edit > Paste from the menubar) to paste the messages here.

  • I tried creating a startup backup via Disk Utility.  There wasn't enough space and now I have no internal disk space. How do I fix this?

    I used DIsk Utility to create a startup backup clone for the first time yesterday.  I cloned it to my internal drive on my Mac.  I let it run all night and when I woke up this morning it showed it as failed (not enough disk space).  Now when I boot up my Mac, it showed a warning at the login screen (not enough disk space at startup).  I do not have an external hard drive (which is why I chose to backup internally).  Do I need to purchase one? 
    It still allows me to log in.  When I open Finder and look at my internal drive, it shows less than 100.00 MB space available.  I tried deleting a bunch of old files and stripped needless apps.  However, it keeps showing my computer as having less than 100 MB of storage. 
    Is there a way to find the failed clone backup and delete it?  I tried looking in Spotlight for the backup clone (I named it 4-21-14.dmg).  I cannot find the file.  I was hoping to backup my files so I can install OS Mavericks on my computer (mid-2010 Macbook Pro), but I do not have enough free space. 

    I solved the problem by deleting over 100 gb of files and apps.  I would have rather not gone that route, but having less than 100 MB of storage is an unacceptable headache to deal with.  Now I have to decide on whether to try again with the backup internally route or risk it and download/install Mavericks.

  • MacBook Pro becomes has spotlight problems when disk space gets low

    I've noticed that when my disk space gets very low, that mds starts running all of the time bringing my laptops's performance to a crawl. I've also noticed that oddly, when I try to use spotlight for a full text search (not just from/to/subject searches) in Mail, that spotlight seems to start re-indexing immediately.
    Specifically:
    1) I go to mail and start a search in spotligh
    2) the "message body" option is available for me to search through the entire message body
    3) I select "message body" for my search, but spotlight finds no results (even though there are some)
    4) the next search I do in Mail via spotlight now shows "message body" as greyed out
    5) mds and associated processes suddenly start running and my mac becomes very slow
    6) after some number of hours, mds stops and "message body" becomes available in Mail again for searches, but as soon as I try to use it this process repeats
    I had about 10 gigs free on my disk, but after freeing up about 30 gigs this all stopped and spotlight started working again fine.

    This emphasises the old guideline of having not more than about 80% of disk space used for best performance on any computer. If in doubt about which hdd to buy get the largest you can afford - probably the next size up from that!
    Neville

  • Disk space running low... but not really.

    I installed Arch on a 150Gb HD lately and I'm experiencing a pretty annoying thing regarding available space on the drive.
    Here is some info:
    fdisk
    Device Boot Start End Blocks Id System
    /dev/sda1 * 1 13 104422 83 Linux
    /dev/sda2 14 79 530145 82 Linux swap / Solaris
    /dev/sda3 80 19457 155653785 83 Linux
    ncdu
    5.2GiB /home
    1.3GiB /usr
    . 250.6MiB /var
    82.0MiB /lib
    . 11.2MiB /boot
    10.5MiB /sbin
    . 6.0MiB /etc
    3.9MiB /bin
    164.0kiB /dev
    20.0kiB /tmp
    4.0kiB /media
    ! 4.0kiB /root
    . 0.0 B /proc
    0.0 B /sys
    0.0 B /srv
    e 0.0 B /mnt
    e 0.0 B /opt
    Everything looks good so far and I should have plenty of space left on the device to play with. But using Thunar in xfce I am told that I have only 350Mb free. This is confirmed by the df command and I can see that I have a huge kcore in /proc.
    df
    /dev/sda3 7655940 7267696 388244 95% /
    udev 10240 164 10076 2% /dev
    none 1033064 140 1032924 1% /dev/shm
    /dev/sda1 101105 13014 82870 14% /boot
    ll /proc
    -r-------- 1 root root 1065349120 Mar 6 13:08 kcore
    Now, I understand that the kcore file is a virtual file that really doesn't affect my available space. But yet, it does affect how eg Thunar operates as it doesn't let me use the gigabytes of free space that I should have available.
    I like the simple partition layout that I'm using, but is there some way to let the system ignore kcore and show the correct available space? Or am I forced to reinstall and use another partition scheme and work around the kcore size?
    Usually I use ext2/3 but this time I thought I'd try jfs. Can that have something to do with this fenomenon? I have never seen this before...

    Hi,
    “However the disk space on 'D' is running low everyday.”
     Base on my experience, it most possible is your application cache full the disk space, or you have configured the unsuitable VSS back up schedule.
    The related KB:
    Modify or Stop an Automatic Backup Schedule
    http://technet.microsoft.com/en-us/library/cc754054.aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Disk space running low

    Hello all;
    I have disk 0 of 136GB and it is partioned to 'C' 60 GB and 'D' 76GB. However the disk space on 'D' is running low everyday. There is apache webserver running however it is only 45gb and rest of the files are around 10gb. I was wondering where is the rest
    20gb? 'D' drie is showing 700mb free Also I cleared some log files from apache and reduced 45gb to 25gb. Hence 'D' showed 18gb free. But today it is showing 1.64gb free.. I have no idea what is going on.

    Hi,
    “However the disk space on 'D' is running low everyday.”
     Base on my experience, it most possible is your application cache full the disk space, or you have configured the unsuitable VSS back up schedule.
    The related KB:
    Modify or Stop an Automatic Backup Schedule
    http://technet.microsoft.com/en-us/library/cc754054.aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Disk space is low in drive

    Dear all,
               In our IDES system it is indicating low disk space in SAP installed drive.
    In that drive it contains SIDDATA1, SIDDATA2, SIDDATA3 and SIDLOG1 contents.
    Our OS is Server2003 and DB is mssql 2000. I had tried shrinking the files in MSSQL level but it is not working for me. Still it is in Low disk space. Is there any way to delete the log files or any data archiving possible.
    Is that we can delete the log files in SAP level.
    Kindly guide me .
    Thanks and regards,
    Rakesh

    Dear Rakesh,
    First of all, what is the harddisk capacity of the machine in which IDES is installed? 
    In that drive it contains SIDDATA1, SIDDATA2, SIDDATA3 and SIDLOG1 contents.
    Which are the directories which take space? if its SIDDATA1, SIDDATA2, SIDDATA3, you cannot reduce that. But if its SIDLOG1, you can.
    Is there any way to delete the log files or any data archiving possible.
    You can actually delete the old log files from usr/sap/<SID>/<INSTANCE>/work directory. But thats not going to help much. you can archive the log files through SQL enterprise manager and shrink the log files.
    Hope this helps.
    Regards,
    Jazz

  • TM eats up internal disk space while it backs up externally

    I started the morning at work with 18GB free on my internal hard disk. After a morning of running Time Machine, I noticed that I only had 2GB left on the internal drive. Pretty soon I could watch as the backup process added about 1GB every five minutes to my internal drive. Meanwhile, it seemed to be backing up to the hard drive as normal. Finally, it had filled up my entire internal drive so that I had literally 0k remaining.
    I have never set my internal drive as the backup location. I wouldn't even know how.
    AppleCare tells me to erase and restore to fix the problem, but that still won't get back my precious internal hard disk space. Where was TM putting all that junk, and how can I get rid of it????

    Hi, and welcome to the forums.
    You may have the "Doppelganger" folder problem. Turn Time Machine OFF.
    From a Finder window, select +Go > Go to Folder,+ then type /Volumes in the prompt.
    That should show all your internal and external drives. They should all be Aliases, of either 4 KB or zero size.
    Anything that isn't an alias, but is an actual folder, delete it and empty the trash. You'll probably have to enter your Admin password.
    If that's no help, do the +Go to Folder+ again, then type /Var/log in the prompt.
    You may have some huge files there; delete them and empty the trash.

  • Lightroom 2 keeps reporting "disk space is low" ... and it's *not* low...

    I have a 2.0 terabyte RAID-5 disk array, of which approximately 1.5 TB is free. At periodic intervales, LIghtroom 2 reports "disk which contains your Lightroom catalog, is low on space," and requests that I try to free up 20MB.
    Heeeeeeeelloooo, Lightroom2. 1.5 TB > 20 MB.
    What could be causing this? Vista reports 1.5 TB free. So does the RAID controller. Only Lightroom seems to be panicking.

    I also experienced the "low space" warning. I was told that it had to do with the amount of free space being a multiple of (or at least ending in a particular number). If Lightroom sees that the free-space figure ends in a particular number, it chokes and gives you the "out of space" error.
    To get around this error, I created a temporary folder into which I copied ~100MB of images. This altered the free-space figure just enough that I stopped getting the error. After my next photo import, I deleted the temporary folder.
    Hopefully this issue is resolved before I hit another "trigger number".

  • Bridge Freezing, Not Displaying Thumbnails, Says Disk Space is Low and to Purge Cache

    Hello,
    I'm working in Bridge CS5 on a Mac 0S X version 10.9.2. I have 12 GB of RAM and the server has 240 TB capacity, 76.69 available.
    Recently I've received the following error message while processing large photo shoots with both DNG and JPEG files: Bridge is running low on memory. It is recommended that Bridge is restarted.
    I have also been manually caching large photo shoots and my cache preferences were set to Keep 100% Preview In Cache and Automatically Export Cache To Folder When Possible. My cache size was set to 500,000.  Yesterday, Bridge started to freeze while attempting to open folders. The wheel would spin at the bottom with the message Compiling Criteria. The only way to close Bridge was a Force Quit. This happened several times.
    Today, image thumbnails will no longer display, only the DNG/JPEG icons. I received the following error message:
    I have tried restarting Bridge while holding the alt/Option key to reset the preferences and checking all three boxes - no luck. I have done the same thing with the boxes unchecked - no luck.  I have tried manually purging the cache from its location in the library - no luck. I have tried resetting the cache preferences from the toolbar - no luck. I have tried deleting the cache files from the folders - nothing changes. I have tried purging the cache for each folder from the tool bar - nothing happens.
    I need to restore the thumbnails and rebuild the cache for each folder. Does anybody have an idea what is wrong or how to help?
    Many Thanks!

    Okay, so I have a solution. If after purging the central cache on the server Bridge continues to not perform normally try emptying the trash. I did this and it worked.

Maybe you are looking for

  • Garageband plugins? Ivory II

    I have Ivory II, Vienna Konzerthaus and Garritan Personal Orchestra and I would like to use them with Garageband ILife '11. Is this possible? I would like to use the software that I already have for domestic use, without having to purchase Logic.

  • HR-ABAP small Question

    Hi, There is a standard table T555U in this table there is only one field ZTERF, when i exceute and saw the contents in the table i found two columns Iho want to know from where  the second column is getting appeared I want to print ZTEXT field in my

  • Save all metadata got disabled

    Hi. In the Netweaver developer studio the save all metadata button got disabled. how to enable it? Regards, Azaz Ali.

  • Image Picker- no images get saved or appear in the folder that gets created though alert says 'Saving images...' :-(

    I am using Image Picker as an addon. Initially it worked fine but not anymore. I follow all the instruction - choosing tab, show all images, select few or all, then Save. An alert appears saying it is saving the selected no. of images, opens the targ

  • Request: UEFI BIOS for GTX660 TF 2GD5/OC

    My graphics card doesn't boot in Win 8.1 Secure Boot mode with current vbios. Bios version: 80.06.28.00.39 (P2030-0000) Bios rom: wikisend.com/download/394812/GK106.rom S/N: 602-V287-050B1305078760