Internal Error: Cannot destroy root table.

Hi Everyone!
I am working on a Pagemaker 7 doc, and when I try to delete a duplicate page Pagemaker shows me the following message: "Internal Error: Cannot destroy root table" then the desired page is not deleted.
Can anybody help me?

>tive os mesmos problemas mencionados acima...
I had the same problems mentioned above...
There are several different problems mentioned above. Did you have them all?
>instalei o Scribus de http://www.scribus.net/ refiz o documento nele e pronto, gerou PDF e arquivos de publicação, para gráfica , FUNCIONA muito bem excelente
I installed Scribus from ..., remade the document in it, and soon it generated PDFs and files for publication, for graphics, IT WORKS very well excellent
Good for you, your problem seems to be solved.
> è claro que a adobe recomenda que se migre para o indesign, mas além do custo adiciona, temos que lembrar as centenas de arquivos que temos e que provavelmente estarão perdidos...
>...certamente não existirá mais um suporte adequado às nossas necessidades nem desenvolvimento, nem sequer estarão preocupados com as compatibilidades e as nossas intermináveis horas produzindo documentos
it's clear that Adobe reccomends to move on to In_Design but, apart of the additional cost, we must remember the hundreds of files we have and that we will probably loose...
... certainly there will no longer be adequate support for our need for development, not even a concern about compatibilities and the endless hours we have spent producing documents
Well, it has been commented for years now that PageMaker is an obsolete program. It's all right for you to rant, but you certainly knew what you were doing when you kept on using it despite the many warnings.
> ... ainda sobre erros internos, alguém sabe como recuperar arquivos que acusam internal error index ??? quase todos os colegas editoradores que ainda usam o pagemaker depois de julho de 2007 estão encontrando este tipo de erro em suas produções...
... continuing with internal errors, anyone knows how to recover files showing an internal index error??? Almost every publishing colleague still using PageMaker after July 2007 have been receiving this error in their documents...
Please read message #7 above. And if you need further help, don't forget to give details about your setup. For example: are you using PageMaker in 9.2.2, or in OSX Classic? What OS version? What PageMaker version?

Similar Messages

Internal error when accessing a table -

Hi,
The program which is running as background was running for last 1 year, last two days the RFC call in the program is dumping.
In DUMP its showing Internal error when accessing a table
Error : DBIF_RSQL_SQL_ERROR
I checed the size of the table its quite huge for the application.
So there is no issue with table.
Please advise what causes these sort of error.
System is ECC 6.0
With SQL server 8.0
Regards,
Thomas

These are the system log i got it from SM21. For this error logs are as below
Very High Priority error
Details Page 2 Line 9 System Log: Local Analysis of onsaprp1                  1
Time
Type
Nr
Clt
TCode
Grp
N
Text
15:43:09
DIA
009
300
AB
0
Run-time error "DBIF_RSQL_INTERNAL_ERROR" occurred
Run-time error "DBIF_RSQL_INTERNAL_ERROR" occurred
Details
Recording at local and central time........................ 11.02.2011 15:43:09
Task......
Process
User......
Terminal
Session
TCode
Program
Cl
Problem cl
Package
03084
Dialog work process No. 009
TOM
1
SAPMSSY1
T
Transaction Problem
SABP
Further details for this message type
Module nam
Line
Error text
absapsql
0786
HandleRsqlErrors
Documentation for system log message AB 0 :
The specified runtime error has occurred in the system.
Parameter
abcdefghijklmnopqrstuvwxyz .. DBIF_RSQL_INTERNAL_ERROR
Technical details
File
Offset
RecFm
System log type
Grp
N
variable message data
119
618840
l
Error (Module, Row)
AB
0
HandleRsqlErrors                                    absapsql0786
High Priority error
Details Page 2 Line 18 System Log: Local Analysis of onsaprp1                 1
Time
Type
Nr
Clt
TCode
Grp
N
Text
15:44:07
DIA
009
300
SMEN
BZ
Y
Unexpected return value 8 when calling up
Unexpected return value 8 when calling up
Details
Recording at local and central time........................ 11.02.2011 15:44:07
Task......
Process
User......
Terminal
Session
TCode
Program
Cl
Problem cl
Package
03084
Dialog work process No. 009
TOM
om-blr-l
1
SMEN
SAPLSMTR_NAVIGATION
K
SAP Web AS Problem
SBAC
Further details for this message type
Module nam
Line
Table Name
Field Name
dbrepolo
172
8
Documentation for system log message BZ Y :
When calling a function within the database interface, a return
value which cannot be processed by the calling function was
provided.
Technical details
File
Offset
RecFm
System log type
Grp
N
variable message data
120
11160
h
Database Error (Non-SQL)
BZ
Y
8                                                   dbrepolo172
Edited by: Thomas Paul jr on Feb 14, 2011 6:36 AM
Edited by: Thomas Paul jr on Feb 14, 2011 6:38 AM

[SOLVED] internal error Cannot find suitable emulator for x86_64

Hi,
After a reboot due to unrelated issues, virt-manager is not showing any of the VMs I had configured via qemu:
I checked connection properties, and everything else is showing up correctly, like the networks and storage. I tried to create new VMs out of existing storage and got this message:
Googling it suggested this happens when KVM module is not loaded. I modprobed kvm, kvm_intel and still got same result.
Systemd gave me the following:
% systemctl status libvirtd
libvirtd.service - Virtualization daemon
Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled)
Active: active (running) since Sat 2013-06-08 08:55:19 IST; 29min ago
Main PID: 1499 (libvirtd)
CGroup: name=systemd:/system/libvirtd.service
├─ 834 /sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf
├─ 863 /sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/nat_static.conf
├─ 881 /sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/closed_dhcp.conf
└─1499 /usr/bin/libvirtd -p /var/run/libvirtd.pid
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:08:20 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:08:20 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:08:35 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:08:35 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Googling that seems to indicate that this happens when virtualization is disabled by BIOS. But cpuinfo tells me that vm is supported:
% grep vmx /proc/cpuinfo | uniq -c
8 flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid
Can anyone help me? Has anyone else faced a similar problem?
Here are some version info:
local/libvirt 1.0.6-1
API for controlling virtualization engines (openvz,kvm,qemu,virtualbox,xen,etc)
local/qemu 1.4.2-1
A generic and open source processor emulator which achieves a good emulation speed by using dynamic translation.
Of which, qemu got updated just today. I will try rolling back to older version and post and update.
Ninja edit: Looks to be qemu. Just running qemu gives me this error:
% qemu-system-x86_64
qemu-system-x86_64: error while loading shared libraries: libiscsi.so.1: cannot open shared object file: No such file or directory
EDIT: The resolution was
pacman -S libiscsi libaio
systemctl restart libvirtd
EDIT2: Made subject line better searchable
Last edited by railmaniac (2013-06-08 04:19:24)

HI,
First of all thanks a lot for this post. I am facing the same issue since yest.
After reboot, my VMs gone missing and even virt-manager was not working (as shown in the screenshots which you have pasted in your post).
Now after trying out the workout which you had mentioned, I am able to get the virt-manager working.
But I am not sure if I can get back my missing VMs .
I am new to linux. Kindly guide me on how I can get back those VMs.
[root@skoduri lib64]# ls /etc/libvirt/qemu/
networks rhel6-vm2.xml rhel6.xml
[root@skoduri lib64]#
[root@skoduri lib64]# ls /etc/libvirt/storage/
autostart default.xml storage_1.xml
[root@skoduri lib64]#
[root@skoduri lib64]#
Thanks,
Soumya

Internal error, cannot load engine Number 2 due to error 5

I have had a StartStop transcription program for several years. I bought my Dell computer with Windows 8 (now 8.1) in late 2014. I had no problems running the StartStop program until it got a tune-up by my regular tech. Since then, when I click to
open it, I get the message: "##### Internal error, cannot load engine Number 2 due to error 5." My tech couldn't figure it out and another tech couldn't fix it either after looking at it for hours. StartStop could not figure it out either.
Since then, I bought a Digitope digitalizer, which converts cassette tapes to CD's. When I try to open that program the exact same error message comes up!
So I am thinking there is something awry with certain audio programs. I am able to run another transcription program, Express Scribe.
Any thoughts!
The 2nd tech suggested rebooting the entire computer and reinstalling all programs, but I'm not sure I can find all my original programs.
Thanks!

Hello Silent Fisher,
What StartStop transcription program do you mean?
Please share me a screenshot.
If it is a third-party software, it is recommended to contact the support of the software.
If the issue occurs after your change, please use the system restore to restore your computer’s system files to an earlier point in time.
http://windows.microsoft.com/en-HK/windows-8/restore-refresh-reset-pc
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

SM58 : Internal error when accessing a table

Hi there,
We have just upgraded from R/3 4.7 to ECC 6.0. After the upgarde we face many "Internal error when accessing a table" in sm58. Is there any table mapping mismatched happened during unicode conversions? How to check the details? Most of the errors are SWW_WI_EXECUTE_INTERNAL_RFC, SWW_WI_CREATE_VIA_EVENT_IBF and etc which are workflow modules.
can you help?
Thanks.
Regards,
Thava

Hi
Have u checked this thread?
problem in TRFC
Error while executing Workflow: User is locked.
/message/5804053#5804053 [original link is broken]
Regards
Sridhar Goli

Exception occurred. Internal error: Cannot obtain XAConnection Creation of XAConnection for pool....

Weblogic Server 6.1 SP2 is running fine. But unable to get XAConnections! I am getting following error
java.sql.SQLException: Internal error: Cannot obtain XAConnection Creation of XAConnection for pool ibesXaConnection Pool failed after waitSecs:300
at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1063)
at weblogic.jdbc.jta.Connection.getXAConn(Connection.java:148)
at weblogic.jdbc.jta.Connection.prepareStatement(Connection.java:236)
at weblogic.jdbc.rmi.internal.ConnectionImpl.prepareStatement(ConnectionImpl.java:135)
at weblogic.jdbc.rmi.SerialConnection.prepareStatement(SerialConnection.java:76)
-GoutamG

Hi Gautam!
Please make sure your refresh minutes is turned off in config.xml. You should put very large value like 999999 for RefreshMinutes parameter for
defination of connectionpool in config.xml instead of 0.
Thanks,
Mitesh
Goutam wrote:
Weblogic Server 6.1 SP2 is running fine. But unable to get XAConnections! I am getting following error
java.sql.SQLException: Internal error: Cannot obtain XAConnection Creation of XAConnection for pool ibesXaConnection Pool failed after waitSecs:300
at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1063)
at weblogic.jdbc.jta.Connection.getXAConn(Connection.java:148)
at weblogic.jdbc.jta.Connection.prepareStatement(Connection.java:236)
at weblogic.jdbc.rmi.internal.ConnectionImpl.prepareStatement(ConnectionImpl.java:135)
at weblogic.jdbc.rmi.SerialConnection.prepareStatement(SerialConnection.java:76)
-GoutamG

Internal error: Cannot obtain XAConnection

I am porting my application from WL8.1-SQl2000 to Sql Server2005. I went in for the Microsoftâ€™s MS SQL Server Driver(Type 4 XA) Versions:2000 and the corresponding one for non-XA also. Then in the next step where we usually give the other DB properties like DB name, server name etc, there is a field called â€œPropertiesâ€ which defines the basic properties which we have configured. In that field, there is a new property having name-value pair : dataSourceName=SQL2000JDBC. I am not sure what this would do, so I just left it to remain & continued with the other things.
This, in no way affected the proper execution of my application.
I have 1 XA datasource & 3 non-XA datasources configured for my application.
When I start my server, in the comman prompt, a resource limit exception appears & then the server proceeds to start successfully. I am also abe to save things into the DB & do all other tests properly. But this keeps hindering me. Our DB server is configured to accept infinite connections, so its absurd to get a connection not available exception.
I doubt whether the initial datasource property that I have mentioned can have anything to do with this exception during startup. Please help me.
Exception trace:
<Nov 15, 2006 12:29:34 PM EST> <Warning> <JDBC> <BEA-001064> <Ignoring property
'enableTwoPhaseCommit' for JDBCTxDataSource "TweDS". This property is used only
for those drivers that do not natively support XA.>
java.sql.SQLException: Internal error: Cannot obtain XAConnection weblogic.commo
n.resourcepool.ResourceLimitException: No resources currently available in pool
ITestPool to allocate to applications, please increase the size of the pool and
retry..
at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1
315)
at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:396)
at weblogic.jdbc.jta.DataSource.connect(DataSource.java:354)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSour
ce.java:305)
at com.taxware.twe.util.SQLConnection.getConnection(SQLConnection.java:1
68)
at com.taxware.twe.audit.AuditStartUp.main(AuditStartUp.java:333)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.t3.srvr.StartupClassService.invokeMain(StartupClassService.j
ava:229)
at
weblogic.t3.srvr.StartupClassService.invokeClass(StartupClassService.
java:160)
at weblogic.t3.srvr.StartupClassService.access$000(StartupClassService.j
ava:36)

charu s wrote:
I am porting my application from WL8.1-SQl2000 to Sql Server2005. I went in for the Microsoft???
s MS SQL Server Driver(Type 4 XA) Versions:2000 and the corresponding one for non-XA also. Then in the next step where we usually give the other DB properties like DB name, server name etc, there is a field called ???Properties??? which defines the basic properties which we have configured. In that field, there is a new property having name-value pair : dataSourceName=SQL2000JDBC. I am not sure w
hat this would do, so I just left it to remain & continued with the other things.
This, in no way affected the proper execution of my application.
I have 1 XA datasource & 3 non-XA datasources configured for my application.
When I start my server, in the comman prompt, a resource limit exception appears & then the server proceeds to start successfully. I am also abe to save things into the DB & do all other tests properly. But this keeps hindering me. Our DB server is configured to accept infinite connections, so its absurd to get a connection not available exception.
I doubt whether the initial datasource property that I have mentioned can have anything to do with this exception during startup. Please help me.
The pool's max capacity is defined as lower than the need at
the time. Please show me the full pool definition from the
config.xml. It may also have something to do with the fact
that your code is a startup class, and are you sure the
pool is ready at this time?
Joe
Exception trace:
<Nov 15, 2006 12:29:34 PM EST> <Warning> <JDBC> <BEA-001064> <Ignoring property
'enableTwoPhaseCommit' for JDBCTxDataSource "TweDS". This property is used only
for those drivers that do not natively support XA.>
java.sql.SQLException: Internal error: Cannot obtain XAConnection weblogic.commo
n.resourcepool.ResourceLimitException: No resources currently available in pool
ITestPool to allocate to applications, please increase the size of the pool and
retry..
at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1
315)
at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:396)
at weblogic.jdbc.jta.DataSource.connect(DataSource.java:354)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSour
ce.java:305)
at com.taxware.twe.util.SQLConnection.getConnection(SQLConnection.java:1
68)
at com.taxware.twe.audit.AuditStartUp.main(AuditStartUp.java:333)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.t3.srvr.StartupClassService.invokeMain(StartupClassService.j
ava:229)
at
weblogic.t3.srvr.StartupClassService.invokeClass(StartupClassService.
java:160)
at weblogic.t3.srvr.StartupClassService.access$000(StartupClassService.j
ava:36)

Java.sql.SQLException: Internal error: Cannot obtain XAConnection

Hi,
I am getting this error .
I have a multi data source which serves two Data source and is using load balancing
I get the below error:
Cannot obtain XAConnection weblogic.common.ResourceException: No good connections available.
The complete error trace is below:
GWMDBBean [onMessage(Message)] 09_MAY 16:24:13:165->EXCEPTION
java.sql.SQLException: Internal error: Cannot obtain XAConnection weblogic.common.ResourceException: No good connections available.
 at weblogic.jdbc.common.internal.MultiPool.findPool(MultiPool.java:187)
 at weblogic.jdbc.common.internal.ConnectionPoolManager.reserve(ConnectionPoolManager.java:87)
 at weblogic.jdbc.common.internal.ConnectionPoolManager.reserve(ConnectionPoolManager.java:61)
 at weblogic.jdbc.jta.DataSource.getXAConnectionFromPool(DataSource.java:1514)
 at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1301)
 at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:426)
 at weblogic.jdbc.jta.DataSource.connect(DataSource.java:383)
 at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:346)
 at com.iflex.fcubs.gwutil.db.GWDBUtil.getConnection(GWDBUtil.java:119)
 at com.iflex.fcubs.gwservices.db.GWMsgProcessor.getConnection(GWMsgProcessor.java:95)
 at com.iflex.fcubs.gwservices.db.inbound.GWMsgSchemaProc.processMsg(GWMsgSchemaProc.java:165)
 at com.iflex.fcubs.gw.mdb.GWMDBBean.processMessage(GWMDBBean.java:1051)
 at com.iflex.fcubs.gw.mdb.GWMDBBean.onMessage(GWMDBBean.java:371)
 at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
 at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
 at weblogic.ejb.container.internal.NewJMSMessagePoller.processOneMessage(NewJMSMessagePoller.java:245)
 at weblogic.ejb.container.internal.NewJMSMessagePoller.run(NewJMSMessagePoller.java:121)
 at weblogic.ejb.container.internal.NewJMSMessagePoller.timerExpired(NewJMSMessagePoller.java:204)
 at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
 at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
 at com.iflex.fcubs.gw.mdb.GWMDBBean.processMessage(GWMDBBean.java:1060)
 at com.iflex.fcubs.gw.mdb.GWMDBBean.onMessage(GWMDBBean.java:371)
 at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
 at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
 at weblogic.ejb.container.internal.NewJMSMessagePoller.processOneMessage(NewJMSMessagePoller.java:245)
 at weblogic.ejb.container.internal.NewJMSMessagePoller.run(NewJMSMessagePoller.java:121)
 at weblogic.ejb.container.internal.NewJMSMessagePoller.timerExpired(NewJMSMessagePoller.java:204)
 at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
 at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
The Data Sources Configuration are as below:
<initial-capacity>15</initial-capacity>
<max-capacity>15</max-capacity>

This indicates that none of your datasources have been able to successfully connect to the database.
Please check the connectivity to your database from the datasources.
Also, you can login into the console and check if the connections are good, by doing test connection on the datasource.
http://docs.oracle.com/cd/E21764_01/apirefs.1111/e13952/taskhelp/jdbc/jdbc_datasources/TestDataSources.html
The error you get when you do test connection will help you to understand any connectivity issues.
Arun

ORA-20079: WM internal error [unable to rename table]

Hi,
I am getting following error when i try to enable versioning on a table. Any idea how to resolve it ?
BEGIN DBMS_WM.EnableVersioning('TestTable'); END;
ERROR at line 1:
ORA-20079: WM internal error [unable to rename table]
ORA-06512: at "SYS.LTDDL", line 1615
ORA-06512: at "SYS.LTDDL", line 1193
ORA-06512: at "SYS.LT", line 647
ORA-06512: at "SYS.LT", line 8024
ORA-06512: at line 1
thanks
-na

Hi,
You need to determine the original error that is being generated by oracle. This can be done by attempting to rename the table yourself. For example:
SQL> alter table TestTable rename to RenamedTable ;
That will give you a better understanding as to why Workspace Manager is unable to rename the table. Also, what version of the database and workspace manager are you using ?
If the direct rename succeeds while enableversioning continues to fail, then you would need to file a TAR on this.
Regards,
Ben

Internal error - insert in sorted tabl ZADRU with

Hello Experts,
While i open BP transaction for one of the business partner. We are getting the following error:
*Internal error - insert in sorted tabl ZADRU with*.
Request your help to resolve this issue. Do we have some SAP note to handle such scenarios. It seems the data has become inconsistent.
Thanks,
Rohit

Hi, Rohit
Table ZADRU - it's your own development, please ask abap-team about this table.
Denis

Internal error cannot print

When I try to print from my computer I get 'internal error cannot print'. My printer HP Photosmart 5510

Shelia,
Thank you for your reply. Here are some further details on the question that you asked:
1. At that beginning, because the PDF file has 226 pages as total and consists of 19 fm files, which I mean the big volume, I thought this problem occurs. (FYI, the small/medium volume means the PDF file has 112 pages as total and consists of 16 fm files / only around 20 pages as total and consists of only 1 fm file.)
However, now, I know the problem occurs in the specific two very small fm files. These two fm files are only 3 pages / 15 pages as total and consists of only one fm file. – So, I do not think the volume relates to this problem.
2. I always use “save it to PDF” to create PDF files so far. I am using the PDF distiller that came with FrameMaker8.
3. All files including graphics are in my local drive (C drive).
So I'm wondering if the problem is possible due to the two specific fm files. If so, what are your recommendations to get around this?
Thanks
Steve

"internal error cannot detect your device" error...

hi, i have a nokia 5310,sim locked to Rogers, the firmware version of my nokia is 03.63, im trying to update it...im using the latest version of nokia OVI,whenever it starts to intall the update,it stalls, then an error message shows up,"internal error >cannot detect your device",i tried to use windows xp/vista,same error,i also tried the PC SUITE,same error,i noticed that the computer will prompt me that the device is connected (via usb),but at the moment the update starts to intall,it disconnects,( the usb is firmly and securely attached to the device),then right after i click 'finish' on the OVI update screen to go back to the main menu, the device re connects itself to OVI (computer),i hope someone can tell me why this is happening,thank you.

hi, i have a nokia 5310,sim locked to Rogers, the firmware version of my nokia is 03.63, im trying to update it...im using the latest version of nokia OVI,whenever it starts to intall the update,it stalls, then an error message shows up,"internal error >cannot detect your device",i tried to use windows xp/vista,same error,i also tried the PC SUITE,same error,i noticed that the computer will prompt me that the device is connected (via usb),but at the moment the update starts to intall,it disconnects,( the usb is firmly and securely attached to the device),then right after i click 'finish' on the OVI update screen to go back to the main menu, the device re connects itself to OVI (computer),i hope someone can tell me why this is happening,thank you.

internal error problem when writing table:

Hi,
When my user try to access BEx queries, he is getting the following pop up messages
<internal error> problem when writing table: C_T_VARIABLES
<internal error> problem when writing table: E_T_DIM
<internal error> problem when writing table: E_T_MEM
<internal error> problem when writing table: E_T_ATR
<internal error> problem when writing table: E_T_PRPTYS
<internal error> problem when writing table: C_T_HRY_TYPES
<internal error> problem when writing table: E_T_CEL
<internal error> problem when writing table: E_T_FAC
<internal error> problem when writing table: E_T_CON
<internal error> problem when writing table: E_T_DRILL
and then report is getting diplayed. and when user try to edit properties again same pop up messages are coming.
when I access queries from my machine those are working fine..
Can some one help me to solve this ?
Regards,
Harish

Hi Harish,
Please go through following relevant threads ::
http://forums.sdn.sap.com/thread.jspa?threadID=137355
http://forums.sdn.sap.com/thread.jspa?threadID=644834
http://forums.sdn.sap.com/thread.jspa?threadID=1199718
http://forums.sdn.sap.com/thread.jspa?threadID=36530
Regards,
Arpit

Internal Error in reading a Table of Oracle custom-defined objects.

Hi,
We are running into an Oracle internal error when trying to extract data from an OUT parameter of a stored procedure. The OUT parameter is of the type TABLE of Oracle custom-defined OBJECT.
Any help on this issue will be greatly appreciated.
Thanks, in advance,
OraNew
Program:
package test;
import java.sql.CallableStatement;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.sql.Types;
import java.util.ArrayList;
import java.util.List;
import oracle.sql.ARRAY;
import oracle.sql.STRUCT;
import src.vo.ProfileBank;
public class TestOracle {
* @param args
public static void main(String[] args) {
try{
Connection con = getConnection();
ResultSet rsBalance = null;
CallableStatement cs =
con.prepareCall("{ CALL acr_profiles.get_profile_bank( ?, ?, ?)}");
cs.setLong(1, new Long(133).longValue());
cs.setLong(2, new Long(29032).longValue());
cs.registerOutParameter(3,Types.ARRAY,"ACR_USER." + "ACR_PROF_BANK_TAB");
cs.execute();
ARRAY array = (oracle.sql.ARRAY) cs.getObject(3);
System.out.println("length: "+ array.length());
System.out.println("isConvertible: " + array.isConvertibleTo(Object.class));
System.out.println("isInline: " + array.isInline());
rsBalance = array.getResultSet();
showResultSet(rsBalance);
} catch (Exception sql){
System.out.println("Exception "+ sql);
public static void showResultSet (ResultSet rs) throws SQLException
System.out.println("ResultSet = "+ rs.toString());
List profileBanks = new ArrayList();
while (rs != null && rs.next()) {
STRUCT struct = (STRUCT)rs.getObject (2); //getting the Internal Error on this line.
Object[] attribs = struct.getAttributes();
System.out.println("Bank Alias Id"+ (java.math.BigDecimal) attribs[0]);
System.out.println("Bank Name"+ (String)attribs[1]);
System.out.println("Bank set flag "+ (String) attribs[2]);
ProfileBank pBank = new ProfileBank();
pBank.setBankAliasId(new Integer(((java.math.BigDecimal) attribs[0]).intValue()));
pBank.setBankName((String) attribs[1]);
pBank.setSelBankFlag((String) attribs[2]);
profileBanks.add(pBank);
public static Connection getConnection() throws ClassNotFoundException, SQLException {
Class.forName("oracle.jdbc.driver.OracleDriver");
System.out.println("Driver loaded");
// establish a connection
Connection conn = DriverManager
.getConnection(
"jdbc:oracle:thin:@(DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=10.3.11.201)(Port=1521)) (CONNECT_DATA=(SERVICE_NAME= aada.a.al)))",
"acr_user", "acr_user");
System.out.println("Database connected");
return conn;
Console Output:
Driver loaded
Database connected
length: 2
isConvertible: false
isInline: true
ResultSet = oracle.jdbc.driver.ArrayDataResultSet@1f3aa07
Exception java.sql.SQLException: Internal Error
Partial Stacktrace obtained from the Eclipse Debug window:
oracle.jdbc.driver.DatabaseError.throwSqlException(int) line: 292
oracle.jdbc.oracore.OracleTypeCOLLECTION.initCollElemTypeName() line: 1192
oracle.jdbc.oracore.OracleTypeCOLLECTION.getAttributeType(int) line: 1225
oracle.jdbc.oracore.OracleTypeADT(oracle.jdbc.oracore.OracleNamedType).getFullName(boolean) line: 119
oracle.jdbc.oracore.OracleTypeADT(oracle.jdbc.oracore.OracleNamedType).getFullName() line: 93
oracle.sql.StructDescriptor(oracle.sql.TypeDescriptor).initSQLName() line: 497
oracle.sql.StructDescriptor(oracle.sql.TypeDescriptor).getName() line: 392
oracle.sql.StructDescriptor.getClass(java.util.Map) line: 2003
oracle.sql.STRUCT.toJdbc(java.util.Map) line: 983
oracle.jdbc.driver.ArrayDataResultSet.getObject(int, java.util.Map) line: 1379
oracle.jdbc.driver.ArrayDataResultSet.getObject(int) line: 1198
test.TestOracle.showResultSet(java.sql.ResultSet) line: 53
test.TestOracle.main(java.lang.String[]) line: 38
Environment:
Database: Oracle 10g (10.2.0.3)
JDBC Drivers: version 10.2.0.3 (ojdbc14, orai18n)
Database Server: HP-UX
Client machine: Windows XP
<end of thread>

hi Thom,
most error relating to table DOKTL are caused by misconfigured network card.
if this is a "home" system, install a loopback adapter from Microsoft and use IP address 127.0.0.1 and also check "hosts" file for inconsistency. do not use the IP adddress provided by your ISP as it may change.

IOS 6.1.2 internal error Cannot sync since update

So first the update forced me to erase my phone to default settings. I survived that. Now I keep getting internal errors when I try to sync my device with iTunes. Anyone else have a fix on this? Other than erasing once again to default. I have a feeling the same thing will happen again and I have a large recording (voice memo) on my phone that I want to get off of my phone and into itunes - the file is too large to email. I have a iPhone 4s also.

I have had this happen as well on an iPhone4, both with 6.2 IOS update, and the 6.2.1 update. Both failed with 'unknown error' and then did a restore (on the same Mac Air), and required a restore of the backup and a sync to get the apps backs (on the same Mac Air). My iPhone5 upgraded just fine though. Other than the two IOS update failures, the iPhone4 works perfectly and sync's fine etc. I rather suspect it is an IOS update issue as I've heard of this same problem on other iPhones, but just iPhone4. Very odd that after the restored backup etc the IOS itself is indeed updated. Perhaps Apple is 'phasing' the iPhone4 and pushing it out with IOS updates that frustrate iPhone4 users, or it's just another example of some MS Windows programmer now working for Apple!

Internal Error: Cannot destroy root table.

Similar Messages

Maybe you are looking for