Internal Requisition Line not appears in receipts form

Hi,
I have created an internal req. with 3 lines. After that the internal requisition was approved. Then one of the lines was cancelled (line 1). After that the ohter 2 lines (line 2 and 3) where received in Receipts form.
As I want to receive also Line 1, I have changed by data fix the CANCEL_FLAG from 'Y' to 'N'. So the problem is that when I go to receipts form, this line (line 1) did no appears.
What happend? Should i have to run a process?
Thanks,
Facudno.

Yes. I update the database table! Is there any other field that I nedd to update by database?

Similar Messages

The new column designed not appears in the form

Dear All Gurus/Experts,
I created new column directly in the database stored in the SQL server 2000,in table IGN1, right click --> select design table, then right click --> insert column, I write U_copqty, numeric data type, 9 is its length and allow nulls check mark.
I can't understand why the field is not appeared in the form settings like other columns so that I can thick and make it appear in the form IGN1 (receipt from production). I have read development training files but I am confusing if it is really need VB.net to do that. I also know about user defined field but it doesn't what I need because I have created UDF in the production order row but I can't find it in the receipt from production form, so I just did create the new field/column directly in its database but I fail to make it appear in the form settings when I need it to be available in the receipt from production form. would you pls help me ? I appreciate your answer. TIA
Rgds,
Steve

Hello Steve,
The reason you can not see the directly added field is because that there is another table CUFD which holds all the User Defined Field information. So, you need to add a new record in that table. However, the approach is really not SAP recommended. Directly handling database could be very risky. Please create the user defined field according to the steps.
Regarding why you can not view the field you created, did you create a row or document level field?
Hope this helps,
Nick

ICONS are not appearing in oracle forms 10g

Dear All,
Good Morning.
I am using oracle 10g forms.
I had my old application in forms6i. I migrated it into forms 10g.
Application is running fine no function problem there is.
But icons are appeared into button.
Please tell me way, how can i configure for icons.

The above mentioned thread is talking about icons not appearing in the Forms builder and not at runtime. I don't think it will help you.
In Webforms displaying "Icons" it's a little bit different than client/server, Webforms use .gif files as icons and not .ico files and these files should be Jarred in a .Jar file and put in a directory where the JVM can reach.
Follow the instruction in the [url http://www.oracle.com/technology/products/forms/pdf/webicons.pdf]Webicons file in page 3 under the "Don't want to learn about the details, Just get started!" it's very easy and fun.
Tony

Bank Charges field not enabled in Receipts Form though the profile is set

Bank Charges field not enabled in Receipts Form though the profile "AR: Create Bank Charges" is set to 'Yes' at Application and Responsibility level. I have also given GL codes for Bank Charges in Payment Method Im using.
What could be the reason for the above?

For Bank Charges to work, we have to use payment method attached to Receipt Class with "No Remittance" Remittance Method and "Directly" Clearance Method. I created a new payment method, using that in receipts form enabled the bank charges.

Cell border not appearing in Adobe forms

Hi,
We Placed a button in internal table cell and itu2019s property is set to invisible.
This button is set to visible based on value of other column value in the same row of table.
But border for the cell is not coming when button is invisible.
Note: the button size is equal to cell size and so when we make the button invisible ,the cell border itself is not appearing as the whole cell is invsible.
How make the cell border visible even the button in that cell is invisible.
Please put your suggestions in this regard.
Regards,
Kranti Yamparala.

Hi Kiran,
Please go through the below link:
http://help.sap.com/saphelp_nw70/helpdata/en/45/2dbb13d79f3446e10000000a155369/frameset.htm
Here the method to hide the toolbar is given. Try passing ABAP_FALSE in method: lr_method_handler->set_hide_toolbars( abap_false ) if it works.
Regards,
Vaibhav

Item billing plan lines not appearing in billing due list ...

Hello Team ,
I have one question on service contract billing plan. Contract has status released.
I have one contract which has header billing plan that is applicable at line item also.
1. At line item level billing plan two items are due for billing but in billing due list this line item does not appear. Some of the lines in Item billing plan are already billed.
Also at item billing plan there is no check (tick mark) for Header Billing Plan.
Can some one suggest what are the possible checks for item billing plan not appearing in billing due list.
Thanks ,
Nitn Patki

Hi Nitin,
Check the status of the line items.
Regards
Narayana

Grid Lines not appearing in Query

Hi all,
I have a query in BI 7.0. The problem is the Grid lines & the Formats are not appearing in the query i.e the row & column lines are not appearing. These were there before 2 weeks but now something has happened and it got changed. So, if i create a workbook from this query, the workbook also reflect the same format. Even if i make the format changes through excel functions, i could only save it as a workbook and it wont reflect in the query.
We are not able to identify exactly why this problem came. It doesnt have anything to do with the Package or patch. This problem occurs only for one query & all the other query formats are working fine. I compared the error free queries with the problem query but everything seems to be the same.
Please help me in solving this problem.
Thanks,
Murali

Hi Everyone,
The issue is solved. The option "Adjust Formatting after Refreshing" in the Query Properties was unchecked. I checked that & the problem is solved.
Thanks,
Murali

Static text is not appearing from the form designer

Hi,
We are using Adobe Live Cycle designer 6.0 to design print forms.
The problem we are facing is, sometimes static text element created on the Body Page of the form does not appear at all(when we open the form designer after creating the Static text element), though we can find the static text in XML Source of the form.
For example, if a text element is created with text "XYZ" on body page, it is not visible on the body page whereas the XML Source contains "XYZ" in it.
What can be the problem ?
Regards,
V Joshi.

Hi Nikhil,
I tried using static text from Standard Library and ISR library too. Still the text disappears when i activate the form.
More inputs on this will be helpful.
Also, we are using the Form Designer Version 6.0 which is in-built component of NWDS 2.0.16 installation.
Regards,
V Joshi.

Graduated Filter "lines" not appearing?!

Hi
Happily using latest Lr 3.3 but just noticed in the last few days that when I use the "graduated filter" function, the three lines do not appear onscreen, but after dragging the cursor across an image, and editing say exposure the image does alter. So the function is working but without the lines.
I've done all the obvious rebooting stuff, shut down other progs etc but no joy.
Anyone else had this, or know how to get the lines back?!
PS:
any ideas how to report this bug to Adobe?
thanks in advance
Edward

Ha! that fixes it
many thanks Jeff, I'll have to watch for this!

Dynamic Subject Line not appearing in PO mail

Hi Experts,
In tcode ME28 when i get the list of POs to be released , I click on the release possible icon against the PO number. On clicking of this, a mail goes to the vendor of the PO.
My requirement is to change the subject line of this mail.
I have done all the required settings in NACE i.e. for this output, in the " Mail title & texts" , I have maintained the text and in the General data tab I have mentioned SAPMM06E as the program & TEXT_SYMBOL_REPLACE as the form routine.
Also in the Mail tab I have done the same : SAPMM06E as the program & TEXT_SYMBOL_REPLACE as the form routine.
But i am not able to get this dynamic mail text in the PO mail , instead of this text, the correspodnig PO number comes as the mail text.
In there anything that I have missed out ?
Please suggest.
Thanks in advance .

Hey ,
is there a code written which will is responsible for forming and sending this mail ? If so the you need to look inside this code and instead see where are you setting PO number in subject line. In that part of code you need to a variable which will hold this dynamic text which you want to send as subject line.
If you can share that code with me , I can help you further.
Hope this is helpful.
Regards,
Uma Dave

TableView separator line not appearing

Hello,
In my xib I have a TableView, I implement a simple custom cell to change the default cells. But when I run the app, the cells appear withou the separators line.
The lines appear in grouped style, but not in plain style.
Someone has this problem?
I'm using the xcode 4.1
I have another app, that I use custom cell, and it's OK.
thanks

Hi,
Check whether your character settings are fine? I mean to say there should be enough spacing between 2 words to display the vertical line. Also your can sterch your window size to accomodate vertical lines.
Regards,
Vinit
Edited by: vinit005 on Feb 22, 2011 12:03 PM

Value of new field in SAP internal table does not appear in HTML

There is already an existing web application. (has both SAP and HTML programs)
I only need to add one field in the SAP internal table and display the value in HTML.
I activated and pushed the publish button in SAP.
Still, it is not read successfully in HTML and therefore not displayed in the GUI.
What step did I miss?

Hi,
To publish completely an internet service, try SIAC_PUBLISH_ALL_INTERNAL transaction.
Hope this helps,
Iván.

Internal Hard Drive Not Appearing in Finder

I just had to do a reboot of my Mac Pro as Final Cut Pro kept locking up and when the computer was back up, one of my Western Digital 2 TB internal hard drives is missing! When I restart, I got a message saying something like the disc inserted cannot be used. It had 3 options and the first time I hit eject thinking it was talking about a DVD, then when I rebooted again I hit the details button and it pulled up Disk Utility. I can see my HD in the menu but when I click on it is says unmounted. The other 2 TB WD Hard drive is working fine. Do I need to click on the verify disk or repair disk button? What should I do? I have quite a bit of video footage on this drive that is missing so I'm super worried I will lose the videos!

etcetera25 wrote:
The drive is a goner otherwise though. Since I was solely using this failed drive recently, I may have just worn it out, which is too bad, even though I worked with an identical 2 TB WD internal drive earlier this year and never had problems with that one.
Drives shouldn't just wear out from use, at least not in a reasonable number of years. They are designed for that. Drives however do fail. However, that drive is more likely to be badly corrupted than it is to be mechanically failing. When you are finished grabbing the data off it, use Disk Utility to zero it out. If it can successfully be zeroed out then it is most likely fine to continue to use.

File Dialog not appearing in web form after Note:74140.1

Hello, I have implemented the source given in Note:74140.1 to replace the get_file_name function that displays the file dialog box. However I still am not able to see the dialog that the JavaBean should display. I am relativly new at linking JavaBeans with forms, so there might be something that I am missing.
I have created the class files for FDialog and FDialogPJC and put them in an ear file. I have also modified the fiels server.xml and default-web-site.xml to include the ear file. The respective code for a button has been added to the button trigger in the form, as well as the code for the JavaBean.
So far this has been unsuccessful. If you have a suggestion, your help is much appreciated.
Justin.

the problem is that when I type JDialogPJC in the implementation class property of the java bean when working in JDeveloper, it cannot locate the java class file JDialogPJC.class. This happens when I put both the JDialogPJC and JDialog classes in the jar file and put the jar file in the forms90/java directory.
However, if I just put both class files (not contained in a jar file) in the forms90/java directory, and I specify the JDialogPJC in the implementation class property of the java bean, it works fine.
I would like to be able to use the jar file instead of a whole load of class files sitting in the directory.

Table lines not appearing in design view

im using dreamweaver 4 and usualy you can see all the tables
youve created in design view but i dont know if iv changed a
setting by accident but now the main outside table is showing but
every other one is invisible. all the content within the tables is
appearing but not the tables. i split the cell of a table and have
to roll the mouse around to try find where the divide is so i can
drag it cos i cant see anything.

pellio wrote:
> im using dreamweaver 4 and usualy you can see all the
tables youve created in
> design view but i dont know if iv changed a setting by
accident but now the
> main outside table is showing but every other one is
invisible. all the content
> within the tables is appearing but not the tables. i
split the cell of a table
> and have to roll the mouse around to try find where the
divide is so i can drag
> it cos i cant see anything.
>
under main menu:
view > visual aids > ...
seb ( [email protected])
http://webtrans1.com | high-end web
design
Downloads: Slide Show, Directory Browser, Mailing List

Internal Requisition Line not appears in receipts form

Similar Messages

Maybe you are looking for